lpsp platform agnostic support
v6 cover lpsp platform agnostic support
This series adds lpsp igt val platform agnostic support.
v6 has fixed the few review comment provided by Animesh by adding a new patch in patchset.
Anshuman Gupta (6):
tests/i915_pm_lpsp: Nuke the panel-fitter test lib/igt_pm: Add lib func to get lpsp capability tests/i915_pm_lpsp: lpsp platform agnostic support test/i915_pm_lpsp: Skip screens-disabled test for DC state platforms tests/i915_pm_lpsp: screens-disabled subtest use igt_wait tests/i915_pm_rpm: lpsp/non-lpsp screen mode_set_data
lib/igt_pm.c | 29 ++++ lib/igt_pm.h | 1 + tests/i915/i915_pm_lpsp.c | 308 +++++++++++++++++--------------------- tests/i915/i915_pm_rpm.c | 53 ++++--- 4 files changed, 198 insertions(+), 193 deletions(-)
Signature · 6 lines
2.26.0 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v6 1/6 tests/i915_pm_lpsp: Nuke the panel-fitter test
panel-fitter subtest is only applicable to HASWELL/BROADWELL. It just tests non-lpsp(lpsp disabled) when panel fitter is enforced by std 1024x768 mode.
There is no ROI to test non-lpsp kind of thing,
If HSW_GLOBAL power well is not enabled we would see other display issues in other display tests.
Gen9+ platform has display scaling feature in built per pipe, as lpsp is all about low power single pipe (PIPE A) usage, gen9+ platforms also don't require panel-fitter subtest. This should save some CI cycles.
--- tests/i915/i915_pm_lpsp.c | 2 -- 1 file changed, 2 deletions(-)
tests/i915/i915_pm_lpsp.c +0 -2
@@ -219,8 +219,6 @@ igt_mainscreens_disabled_subtest (drm_fd, drm_res); igt_subtest("edp-native")edp_subtest (drm_fd, drm_res, drm_connectors, devid, false); - igt_subtest("edp-panel-fitter") -edp_subtest (drm_fd, drm_res, drm_connectors, devid, true); igt_subtest("non-edp")non_edp_subtest (drm_fd, drm_res, drm_connectors);
Signature · 6 lines
2.26.0 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v6 1/6] tests/i915_pm_lpsp: Nuke the panel-fitter test
Quoted 7 lines · Anshuman Gupta
panel-fitter subtest is only applicable to HASWELL/BROADWELL. It just tests non-lpsp(lpsp disabled) when panel fitter is enforced by std 1024x768 mode.
There is no ROI to test non-lpsp kind of thing,
IfHSW_GLOBALpower well is not enabled we would see other display issues in other display tests.
Quoted 6 lines
Gen9+ platform has display scaling feature in built per pipe, as lpsp is all about low power single pipe (PIPE A) usage, gen9+ platforms also don't require panel-fitter subtest. This should save some CI cycles.
Signed-off-by Anshuman Gupta <[email protected]>
Changes looks good to me.
Quoted 9 lines
--- tests/i915/i915_pm_lpsp.c | 2 -- 1 file changed, 2 deletions(-)tests/i915/i915_pm_lpsp.c +0
-0
tests/i915/i915_pm_lpsp.c igt_main · line 224
Quoted 8 lines
tests/i915/i915_pm_lpsp.c +0
-2@@ -219,8 +219,6 @@ igt_mainscreens_disabled_subtest (drm_fd, drm_res); igt_subtest("edp-native")edp_subtest (drm_fd, drm_res, drm_connectors, devid, false); - igt_subtest("edp-panel-fitter") -edp_subtest (drm_fd, drm_res, drm_connectors, devid, true); igt_subtest("non-edp")non_edp_subtest (drm_fd, drm_res, drm_connectors);
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v6 2/6 lib/igt_pm: Add lib func to get lpsp capability
In reply to Anshuman GuptaThis lib function evaluate the lpsp capability from the connector specific debugfs attribute i915_lpsp_info.
v2:
- changed the lib function prefix igt_output_is_lpsp_capable to i915_output_is_lpsp_capable. [Martin]
v3:
- early return for the connector which doesn't support lpsp on any platform.
v4:
- debugfs entry changed from i915_lpsp_info to i915_lpsp_capability. v5:
- return lpsp capability false if i915_lpsp_capability debugfs is not present. [Animesh]
--- lib/igt_pm.c | 29 +++++++++++++++++++++++++++++ lib/igt_pm.h | 1 + 2 files changed, 30 insertions(+)
lib/igt_pm.c +29 -0
@@ -37,6 +37,7 @@#include <dirent.h> #include "drmtest.h" +#include "igt_kms.h" #include "igt_pm.h" #include "igt_aux.h" #include "igt_sysfs.h"
@@ -827,3 +828,31 @@ bool igt_pm_pc8_plus_residencies_enabled(int msr_fd)return true; } + +/** +* i915_output_is_lpsp_capable: +* @drm_fd: fd to drm device +* @output: igt output for which lpsp capability need to be evaluated +* Check lpsp capability for a given output. +* +* Returns: +* True if given output is lpsp capable otherwise false. +*/ +bool i915_output_is_lpsp_capable (int drm_fd,igt_output_t *output) +{ +char buf[256 ]; +int fd, len; + + fd =igt_debugfs_connector_dir (drm_fd, output->name,O_RDONLY ); +igt_require (fd >=0 ); + len =igt_debugfs_simple_read (fd,"i915_lpsp_capability" , + buf,sizeof (buf)); + +/* if i915_lpsp_capability not present return the capability as false */ +if (len <0 ) +return false; + +close (fd); + +return strstr (buf,"LPSP: capable" ); +}
lib/igt_pm.h +1 -0
@@ -53,5 +53,6 @@ enum igt_runtime_pm_status igt_get_runtime_pm_status(void);bool igt_wait_for_pm_status (enum igt_runtime_pm_status status);bool igt_pm_dmc_loaded (int debugfs);bool igt_pm_pc8_plus_residencies_enabled (int msr_fd); +bool i915_output_is_lpsp_capable (int drm_fd,igt_output_t *output);#endif /* IGT_PM_H */
Signature · 6 lines
2.26.0 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v6 3/6 tests/i915_pm_lpsp: lpsp platform agnostic support
In reply to Anshuman GuptaCurrent implementation of lpsp igt test, assumed that every non-edp panel isn't a lpsp panel but it is not true on TGL anymore, any HDMI/DP/DSI panel connected on pipe A and connected to PORT_{A,B,C} can drive LPSP.
Even on older Gen9 platform a DP panel can drive lpsp on Port A. This requires complete design change in current lpsp igt for a platform agnostic support.
The new igt approach is relies on connector specific i915_lpsp_capability and i915_lpsp_status debugfs attributes, these debugfs exposes whether an output is capable of driving lpsp and lpsp is enabled.
Nuking edp-native and non-edp test, introducing a new dynamic igt subtest kms-lpsp, which validates lpsp on each connected output and skip the subtest if output is not lpsp capable.
v2:
- CI failures fixup.
v3:
- removed unloading of snd_modules. [Martin]
v4:
- Don't test non-lpsp(if lpsp disabled), no ROI to test that.
- nuke panel-fitter test.
v5:
- Added dynamic subtest and igt changes according to kernel debugfs i915_lpsp_status changes.
v6:
- Avoided pipe big joiner by using 4k or lesser mode, so igt will not fail when pipe big joiner patches will land to kernel.
--- tests/i915/i915_pm_lpsp.c | 301 +++++++++++++++++--------------------- 1 file changed, 133 insertions(+), 168 deletions(-)
tests/i915/i915_pm_lpsp.c +133 -168
@@ -25,210 +25,175 @@*/ #include "igt.h" +#include "igt_kmod.h" +#include "igt_pm.h" +#include "igt_sysfs.h" #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> +#define MAX_SINK_LPSP_INFO_BUF_LEN 4096 -static bool supports_lpsp (uint32_t devid) -{ -return IS_HASWELL (devid) ||IS_BROADWELL (devid); -} +#define PWR_DOMAIN_INFO "i915_power_domain_info" -static bool lpsp_is_enabled (int drm_fd) +typedef struct { +int drm_fd; +int debugfs_fd; +uint32_t devid; +char *pwr_dmn_info; +igt_display_t display; +struct igt_fb fb; +drmModeModeInfo *mode; +igt_output_t *output; +}data_t ; + +static bool lpsp_is_enabled (data_t *data) { -uint32_t val; +char buf[MAX_SINK_LPSP_INFO_BUF_LEN ]; +int len; - val =INREG (HSW_PWR_WELL_CTL2 ); -return !(val &HSW_PWR_WELL_STATE_ENABLED ); -} + len =igt_debugfs_simple_read (data->debugfs_fd,"i915_lpsp_status" , + buf,sizeof (buf)); +if (len <0 ) +igt_assert_eq (len, -ENODEV ); -/* The LPSP mode is all about an enabled pipe, but we expect to also be in the -* low power mode when no pipes are enabled, so do this check anyway. */ -static void screens_disabled_subtest (int drm_fd,drmModeResPtr drm_res) -{ -kmstest_unset_all_crtcs (drm_fd, drm_res); -igt_assert (lpsp_is_enabled (drm_fd)); +igt_skip_on (strstr (buf,"LPSP: not supported" )); + +return strstr (buf,"LPSP: enabled" ); } -static uint32_t create_fb (int drm_fd,int width,int height) +/* +* The LPSP mode is all about an enabled pipe, but we expect to also be in the +* low power mode when no pipes are enabled, so do this check anyway. +*/ +static void screens_disabled_subtest (data_t *data) { -struct igt_fb fb; +igt_output_t *output; +int valid_output =0 ; +enum pipe pipe; + +for_each_pipe_with_single_output (&data->display, pipe, output) { + data->output = output; +igt_output_set_pipe (data->output,PIPE_NONE ); +igt_display_commit (&data->display); + valid_output++; + } -return igt_create_pattern_fb (drm_fd, width, height,DRM_FORMAT_XRGB8888 , -LOCAL_DRM_FORMAT_MOD_NONE , &fb); +igt_require_f (valid_output,"No connected output found\n" ); +igt_assert_f (lpsp_is_enabled (data),"lpsp is not enabled\n%s:\n%s\n" , +PWR_DOMAIN_INFO , data->pwr_dmn_info = +igt_sysfs_get (data->debugfs_fd,PWR_DOMAIN_INFO )); } -static void edp_subtest (int drm_fd,drmModeResPtr drm_res, -drmModeConnectorPtr *drm_connectors,uint32_t devid, -bool use_panel_fitter) +static void setup_lpsp_output (data_t *data) { -int i, rc; -uint32_t crtc_id =0 , buffer_id =0 ; -drmModeConnectorPtr connector =NULL ; -drmModeModeInfoPtr mode =NULL ; -drmModeModeInfo std_1024_mode = { - .clock =65000 , - .hdisplay =1024 , - .hsync_start =1048 , - .hsync_end =1184 , - .htotal =1344 , - .hskew =0 , - .vdisplay =768 , - .vsync_start =771 , - .vsync_end =777 , - .vtotal =806 , - .vscan =0 , - .vrefresh =60 , - .flags =0xA , - .type =0x40 , - .name ="Custom 1024x768" , - }; - -kmstest_unset_all_crtcs (drm_fd, drm_res); - -for (i =0 ; i < drm_res->count_connectors; i++) { -drmModeConnectorPtr c = drm_connectors[i]; - -if (c->connector_type != DRM_MODE_CONNECTOR_eDP) -continue ; -if (c->connection !=DRM_MODE_CONNECTED ) -continue ; - -if (!use_panel_fitter && c->count_modes) { - connector = c; - mode = &c->modes[0 ]; -break ; - } -if (use_panel_fitter) { - connector = c; - -/* This is one of the modes Xorg creates for panels, so -* it should work just fine. Notice that Gens that -* support LPSP are too new for panels with native -* 1024x768 resolution, so this should force the panel -* fitter. */ -igt_assert (c->count_modes && - c->modes[0 ].hdisplay >1024 ); -igt_assert (c->count_modes && - c->modes[0 ].vdisplay >768 ); - mode = &std_1024_mode; -break ; - } - } -igt_require (connector); - - crtc_id =kmstest_find_crtc_for_connector (drm_fd, drm_res, connector, -0 ); - buffer_id =create_fb (drm_fd, mode->hdisplay, mode->vdisplay); - -igt_assert (buffer_id); -igt_assert (connector); -igt_assert (mode); - - rc =drmModeSetCrtc (drm_fd, crtc_id, buffer_id,0 ,0 , - &connector->connector_id,1 , mode); -igt_assert_eq (rc,0 ); - -if (use_panel_fitter) { -if (IS_HASWELL (devid)) -igt_assert (!lpsp_is_enabled (drm_fd)); -else -igt_assert (lpsp_is_enabled (drm_fd)); - }else { -igt_assert (lpsp_is_enabled (drm_fd)); - } +igt_plane_t *primary; + +/* set output pipe = PIPE_A for LPSP */ +igt_output_set_pipe (data->output,PIPE_A ); + primary =igt_output_get_plane_type (data->output, +DRM_PLANE_TYPE_PRIMARY ); +igt_plane_set_fb (primary,NULL ); +igt_create_pattern_fb (data->drm_fd, + data->mode->hdisplay, data->mode->vdisplay, +DRM_FORMAT_XRGB8888 , +LOCAL_DRM_FORMAT_MOD_NONE , + &data->fb); +igt_plane_set_fb (primary, &data->fb); +igt_display_commit (&data->display); } -static void non_edp_subtest (int drm_fd,drmModeResPtr drm_res, -drmModeConnectorPtr *drm_connectors) +static void test_cleanup (data_t *data) { -int i, rc; -uint32_t crtc_id =0 , buffer_id =0 ; -drmModeConnectorPtr connector =NULL ; -drmModeModeInfoPtr mode =NULL ; - -kmstest_unset_all_crtcs (drm_fd, drm_res); - -for (i =0 ; i < drm_res->count_connectors; i++) { -drmModeConnectorPtr c = drm_connectors[i]; - -if (c->connector_type == DRM_MODE_CONNECTOR_eDP) -continue ; -if (c->connection !=DRM_MODE_CONNECTED ) -continue ; +igt_plane_t *primary; + +if (!data->output || data->output->pending_pipe ==PIPE_NONE ) +return ; + + primary =igt_output_get_plane_type (data->output, +DRM_PLANE_TYPE_PRIMARY ); +igt_plane_set_fb (primary,NULL ); +igt_output_set_pipe (data->output,PIPE_NONE ); +igt_display_commit (&data->display); +igt_remove_fb (data->drm_fd, &data->fb); + data->output =NULL ; +} -if (c->count_modes) { - connector = c; - mode = &c->modes[0 ]; -break ; +static void test_lpsp (data_t *data) +{ +drmModeConnectorPtr c = data->output->config.connector; +int i; + +/* LPSP is low power single pipe usages i.e. PIPE_A */ +igt_require (igt_pipe_connector_valid (PIPE_A , data->output)); +igt_require_f (i915_output_is_lpsp_capable (data->drm_fd, data->output), +"output is not lpsp capable\n" ); + + data->mode =igt_output_get_mode (data->output); + +/* For LPSP avoid pipe big joiner by atleast 4k mode */ +if (data->mode->hdisplay >3860 && data->mode->vdisplay >2160 ) +for (i =1 ; i < c->count_modes; i++) { +if (c->modes[i].hdisplay <=3860 && + c->modes[i].vdisplay <=2160 ) { + data->mode = &c->modes[i]; +igt_output_override_mode (data->output, + data->mode); +break ; + } } - } -igt_require (connector); - - crtc_id =kmstest_find_crtc_for_connector (drm_fd, drm_res, connector, -0 ); - buffer_id =create_fb (drm_fd, mode->hdisplay, mode->vdisplay); -igt_assert (buffer_id); -igt_assert (mode); +igt_require (data->mode->hdisplay <=3860 && + data->mode->vdisplay <=2160 ); - rc =drmModeSetCrtc (drm_fd, crtc_id, buffer_id,0 ,0 , - &connector->connector_id,1 , mode); -igt_assert_eq (rc,0 ); - -igt_assert (!lpsp_is_enabled (drm_fd)); +setup_lpsp_output (data); +igt_assert_f (lpsp_is_enabled (data),"%s: lpsp is not enabled\n%s:\n%s\n" , + data->output->name,PWR_DOMAIN_INFO , data->pwr_dmn_info = +igt_sysfs_get (data->debugfs_fd,PWR_DOMAIN_INFO )); } -#define MAX_CONNECTORS 32 - -int drm_fd; -uint32_t devid; -drmModeResPtr drm_res; -drmModeConnectorPtr drm_connectors[MAX_CONNECTORS ]; -struct intel_mmio_data mmio_data; +IGT_TEST_DESCRIPTION ("These tests validates display Low Power Single Pipe configurations" ); igt_main { - igt_fixture { -int i; - - drm_fd =drm_open_driver_master (DRIVER_INTEL ); -igt_require (drm_fd >=0 ); - - devid =intel_get_drm_devid (drm_fd); +data_t data = {}; - drm_res =drmModeGetResources (drm_fd); -igt_require (drm_res); -igt_assert (drm_res->count_connectors <=MAX_CONNECTORS ); - -for (i =0 ; i < drm_res->count_connectors; i++) - drm_connectors[i] =drmModeGetConnectorCurrent (drm_fd, - drm_res->connectors[i]); + igt_fixture { + data.drm_fd =drm_open_driver_master (DRIVER_INTEL ); +igt_require (data.drm_fd >=0 ); + data.debugfs_fd =igt_debugfs_dir (data.drm_fd); +igt_require (data.debugfs_fd >=0 );igt_pm_enable_audio_runtime_pm (); - -igt_require (supports_lpsp (devid)); - -intel_register_access_init (&mmio_data,intel_get_pci_device (),0 , drm_fd); -kmstest_set_vt_graphics_mode (); + data.devid =intel_get_drm_devid (data.drm_fd); +igt_display_require (&data.display, data.drm_fd); +igt_require (igt_pm_dmc_loaded (data.debugfs_fd)); } +igt_describe ("This test validates lpsp while all crtc are disabled" ); igt_subtest("screens-disabled") -screens_disabled_subtest (drm_fd, drm_res); - igt_subtest("edp-native") -edp_subtest (drm_fd, drm_res, drm_connectors, devid, false); - igt_subtest("non-edp") -non_edp_subtest (drm_fd, drm_res, drm_connectors); +screens_disabled_subtest (&data); - igt_fixture { -int i; +igt_describe ("This test validates lpsp on all connected outputs on low power PIPE_A" ); + igt_subtest_with_dynamic_f("kms-lpsp") { +igt_display_t *display = &data.display; +igt_output_t *output; + +for_each_connected_output (display, output) { +igt_dynamic_f ("kms-lpsp-%s" , + kmstest_connector_type_str(output->config.connector->connector_type)) { + data.output = output; +test_lpsp (&data); + } -intel_register_access_fini (&mmio_data); -for (i =0 ; i < drm_res->count_connectors; i++) -drmModeFreeConnector (drm_connectors[i]); -drmModeFreeResources (drm_res); -close (drm_fd); +test_cleanup (&data); + } + } + + igt_fixture { +free (data.pwr_dmn_info); +close (data.drm_fd); +igt_display_fini (&data.display); } }
Signature · 6 lines
2.26.0 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v6 4/6 test/i915_pm_lpsp: Skip screens-disabled test for DC state platforms
In reply to Anshuman Guptascreens-disabled test is only valid for the plaforms like HSW/BDW where PG1 is Always-ON power domain, so these platform test lpsp with all screen disabled i.e validate PG2 when all screen are disabled.
DC state i.e DMC f/w supported platforms don't have any ROI to validate screen-disabled subtest as existing dc*-dpms i915_pm_dc subtest already validate it implicitly.
This should save some CI-Cycles.
--- tests/i915/i915_pm_lpsp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
tests/i915/i915_pm_lpsp.c +4 -1
@@ -172,8 +172,11 @@ igt_main }igt_describe ("This test validates lpsp while all crtc are disabled" ); - igt_subtest("screens-disabled") + igt_subtest("screens-disabled") { +igt_skip_on_f (openat (data.debugfs_fd,"i915_dmc_info" ,O_RDONLY ) >0 , +"DC states supported platform don't have ROI for this subtest\n" );screens_disabled_subtest (&data); + }igt_describe ("This test validates lpsp on all connected outputs on low power PIPE_A" ); igt_subtest_with_dynamic_f("kms-lpsp") {
Signature · 6 lines
2.26.0 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v6 4/6] test/i915_pm_lpsp: Skip screens-disabled test for DC state platforms
Quoted 19 lines · Anshuman Gupta
screens-disabled test is only valid for the plaforms like HSW/BDW where PG1 is Always-ON power domain, so these platform test lpsp with all screen disabled i.e validate PG2 when all screen are disabled.
DC state i.e DMC f/w supported platforms don't have any ROI to validate screen-disabled subtest as existing dc*-dpmsi915_pm_dcsubtest already validate it implicitly.
This should save some CI-Cycles.Signed-off-by Anshuman Gupta <[email protected]>--- tests/i915/i915_pm_lpsp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)tests/i915/i915_pm_lpsp.c +0
-0
tests/i915/i915_pm_lpsp.c igt_main · line 179
Quoted 9 lines
tests/i915/i915_pm_lpsp.c +4
-1@@ -172,8 +172,11 @@ igt_main }igt_describe ("This test validates lpsp while all crtc are disabled" ); - igt_subtest("screens-disabled") + igt_subtest("screens-disabled") { +igt_skip_on_f (openat (data.debugfs_fd,"i915_dmc_info" ,O_RDONLY ) >0 , +"DC states supported platform don't have ROI for this subtest\n" );screens_disabled_subtest (&data); + }
I agree from gen9 onward dmc support is present and same time we have multiple power-well having different pipe.
To avoid platform specific change I feel ok to check dmc info. Changes looks good to me.
Can you please club together the changes of this patch with previous one (3/6) where screens_disabled_subtest is implemented to give a better clarity on which platform it is targeted for.
Regards,
Animesh
tests/i915/i915_pm_lpsp.c igt_main · line 182
Quoted 3 lines
tests/i915/i915_pm_lpsp.c +0
-0igt_describe ("This test validates lpsp on all connected outputs on low power PIPE_A" ); igt_subtest_with_dynamic_f("kms-lpsp") {
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v6 5/6 tests/i915_pm_lpsp: screens-disabled subtest use igt_wait
In reply to Anshuman GuptaWhen all screens are disabled, it takes some time to release eDP/DP AUX IO power domain ref count. Also, delayed audio codec disabling takes time to release AUDIO power domain ref-count, using igt_wait to check lpsp after disabling all screens.
v2:
- Added a code comment for delay of igt_wait. [Animesh]
--- tests/i915/i915_pm_lpsp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
tests/i915/i915_pm_lpsp.c +3 -1
@@ -81,7 +81,9 @@ static void screens_disabled_subtest(data_t *data) }igt_require_f (valid_output,"No connected output found\n" ); -igt_assert_f (lpsp_is_enabled (data),"lpsp is not enabled\n%s:\n%s\n" , +/* eDP panel may have power_cycle_delay of 600ms, 1sec delay is safer */ +igt_assert_f (igt_wait (lpsp_is_enabled (data),1000 ,100 ), +"lpsp is not enabled\n%s:\n%s\n" ,PWR_DOMAIN_INFO , data->pwr_dmn_info =igt_sysfs_get (data->debugfs_fd,PWR_DOMAIN_INFO )); }
Signature · 6 lines
2.26.0 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v6 5/6] tests/i915_pm_lpsp: screens-disabled subtest use igt_wait
Quoted 9 lines · Anshuman Gupta
When all screens are disabled, it takes some time to release eDP/DP AUX IO power domain ref count. Also, delayed audio codec disabling takes time to release AUDIO power domain ref-count, using
igt_waitto check lpsp after disabling all screens.v2:
- Added a code comment for delay ofigt_wait. [Animesh]Signed-off-by Anshuman Gupta <[email protected]>
Looks good to me.
Quoted 9 lines
--- tests/i915/i915_pm_lpsp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)tests/i915/i915_pm_lpsp.c +0
-0
tests/i915/i915_pm_lpsp.c static void screens_disabled_subtest(data_t *data) · line 89
Quoted 10 lines
tests/i915/i915_pm_lpsp.c +3
-1@@ -81,7 +81,9 @@ static void screens_disabled_subtest(data_t *data) }igt_require_f (valid_output,"No connected output found\n" ); -igt_assert_f (lpsp_is_enabled (data),"lpsp is not enabled\n%s:\n%s\n" , +/* eDP panel may have power_cycle_delay of 600ms, 1sec delay is safer */ +igt_assert_f (igt_wait (lpsp_is_enabled (data),1000 ,100 ), +"lpsp is not enabled\n%s:\n%s\n" ,PWR_DOMAIN_INFO , data->pwr_dmn_info =igt_sysfs_get (data->debugfs_fd,PWR_DOMAIN_INFO )); }
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v6 6/6 tests/i915_pm_rpm: lpsp/non-lpsp screen mode_set_data
In reply to Anshuman GuptaInitialize the mode set params for lpsp/non-lpsp screen based upon their output lpsp capability instead of edp/non-edp output type.
v2:
- CI failures fixup.
v3:
- changes according to lib function igt_output_is_lpsp_capable prefix chnaged to i915_output_is_lpsp_capable.
--- tests/i915/i915_pm_rpm.c | 53 +++++++++++++++++++++++----------------- 1 file changed, 30 insertions(+), 23 deletions(-)
tests/i915/i915_pm_rpm.c +30 -23
@@ -94,6 +94,7 @@ struct mode_set_data {drmModeResPtr res;drmModeConnectorPtr connectors[MAX_CONNECTORS ];drmModePropertyBlobPtr edids[MAX_CONNECTORS ]; +igt_display_t display;uint32_t devid; };
@@ -254,29 +255,29 @@ static bool init_modeset_params_for_type(struct mode_set_data *data, {drmModeConnectorPtr connector =NULL ;drmModeModeInfoPtr mode =NULL ; +igt_output_t *output =NULL ; +igt_display_t *display = &data->display; -if (!data->res) +if (!data->res || !display)return false; -for (int i =0 ; i < data->res->count_connectors; i++) { -drmModeConnectorPtr c = data->connectors[i]; +for_each_connected_output (display, output) { +drmModeConnectorPtr c = output->config.connector;if (type ==SCREEN_TYPE_LPSP && - c->connector_type != DRM_MODE_CONNECTOR_eDP) + !i915_output_is_lpsp_capable (drm_fd, output))continue ;if (type ==SCREEN_TYPE_NON_LPSP && - c->connector_type == DRM_MODE_CONNECTOR_eDP) +i915_output_is_lpsp_capable (drm_fd, output))continue ; -if (c->connection ==DRM_MODE_CONNECTED && c->count_modes) { - connector = c; - mode = &c->modes[0 ]; -break ; - } + connector = c; + mode =igt_output_get_mode (output); +break ; } -if (!connector) +if (!connector || !mode)return false; igt_create_pattern_fb(drm_fd, mode->hdisplay, mode->vdisplay,
@@ -397,6 +398,7 @@ static void init_mode_set_data(struct mode_set_data *data)kmstest_set_vt_graphics_mode (); } +igt_display_require (&data->display, drm_fd); data->devid =intel_get_drm_devid (drm_fd);init_modeset_cached_params (&ms_data); }
@@ -410,6 +412,8 @@ static void fini_mode_set_data(struct mode_set_data *data) }drmModeFreeResources (data->res); } + +igt_display_fini (&data->display); }static void get_drm_info (struct compare_data *data)
@@ -760,7 +764,7 @@ static void dump_file(int dir, const char *filename)free (contents); } -static bool setup_environment (void ) +static bool setup_environment (bool display_disabled) {if (has_runtime_pm) goto out;
@@ -772,7 +776,8 @@ static bool setup_environment(void) debugfs =igt_debugfs_dir (drm_fd);igt_require (debugfs !=-1 ); -init_mode_set_data (&ms_data); +if (!display_disabled) +init_mode_set_data (&ms_data);igt_pm_enable_sata_link_power_management ();
@@ -785,13 +790,14 @@ static bool setup_environment(void)igt_require (igt_pm_dmc_loaded (debugfs)); out: -disable_all_screens (&ms_data); +if (!display_disabled) +disable_all_screens (&ms_data);dump_file (debugfs,"i915_runtime_pm_status" );return wait_for_suspended (); } -static void teardown_environment (void ) +static void teardown_environment (bool display_disabled) {close (msr_fd);if (has_pc8)
@@ -801,7 +807,8 @@ static void teardown_environment(void)igt_pm_restore_sata_link_power_management (); -fini_mode_set_data (&ms_data); +if (!display_disabled) +fini_mode_set_data (&ms_data);close (debugfs);close (drm_fd);
@@ -2004,7 +2011,7 @@ static struct option long_options[] = { igt_main_args("", long_options, help_str, opt_handler, NULL) { igt_subtest("basic-rte") { -igt_assert (setup_environment ()); +igt_assert (setup_environment (false));basic_subtest (); }
@@ -2012,7 +2019,7 @@ igt_main_args("", long_options, help_str, opt_handler, NULL)* PC8+. We don't want bug reports from cases where the machine is just * not properly configured. */ igt_fixture -igt_require (setup_environment ()); +igt_require (setup_environment (false ));if (stay)igt_subtest ("stay" )
@@ -2142,7 +2149,7 @@ igt_main_args("", long_options, help_str, opt_handler, NULL) }igt_fixture -teardown_environment (); +teardown_environment (false ); igt_subtest("module-reload") {igt_debug ("Reload w/o display\n" );
@@ -2151,9 +2158,9 @@ igt_main_args("", long_options, help_str, opt_handler, NULL)igt_kmsg (KMSG_INFO "Reloading i915 w/o display\n" );igt_assert_eq (igt_i915_driver_load ("disable_display=1 mmio_debug=-1" ),0 ); -igt_assert (setup_environment ()); +igt_assert (setup_environment (true));igt_assert (igt_wait (device_in_pci_d3 (),2000 ,100 )); -teardown_environment (); +teardown_environment (true);igt_debug ("Reload as normal\n" );igt_i915_driver_unload ();
@@ -2161,11 +2168,11 @@ igt_main_args("", long_options, help_str, opt_handler, NULL)igt_kmsg (KMSG_INFO "Reloading i915 as normal\n" );igt_assert_eq (igt_i915_driver_load ("mmio_debug=-1" ),0 ); -igt_assert (setup_environment ()); +igt_assert (setup_environment (false));igt_assert (igt_wait (device_in_pci_d3 (),2000 ,100 ));if (enable_one_screen_with_type (&ms_data,SCREEN_TYPE_ANY ))drm_resources_equal_subtest (); -teardown_environment (); +teardown_environment (false);/* Remove our mmio_debugging module */ igt_i915_driver_unload ();
Signature · 6 lines
2.26.0 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v6 6/6] tests/i915_pm_rpm: lpsp/non-lpsp screen mode_set_data
Quoted 4 lines · Anshuman Gupta
Initialize the mode set params for lpsp/non-lpsp screen based upon their output lpsp capability instead of edp/non-edp output type.
Quoted 8 lines
v2:
- CI failures fixup.
v3:
- changes according to lib functionigt_output_is_lpsp_capableprefix chnaged toi915_output_is_lpsp_capable.Acked-by Martin Peres <[email protected]>Signed-off-by Anshuman Gupta <[email protected]>
Changes looks good to me.
Quoted 163 lines
--- tests/i915/i915_pm_rpm.c | 53 +++++++++++++++++++++++----------------- 1 file changed, 30 insertions(+), 23 deletions(-)tests/i915/i915_pm_rpm.c +28
-21@@ -94,6 +94,7 @@ struct mode_set_data {drmModeResPtr res;drmModeConnectorPtr connectors[MAX_CONNECTORS ];drmModePropertyBlobPtr edids[MAX_CONNECTORS ]; +igt_display_t display;uint32_t devid; };@@ -254,29 +255,29 @@ static bool init_modeset_params_for_type(struct mode_set_data *data, {drmModeConnectorPtr connector =NULL ;drmModeModeInfoPtr mode =NULL ; +igt_output_t *output =NULL ; +igt_display_t *display = &data->display; -if (!data->res) +if (!data->res || !display)return false; -for (int i =0 ; i < data->res->count_connectors; i++) { -drmModeConnectorPtr c = data->connectors[i]; +for_each_connected_output (display, output) { +drmModeConnectorPtr c = output->config.connector;if (type ==SCREEN_TYPE_LPSP && - c->connector_type != DRM_MODE_CONNECTOR_eDP) + !i915_output_is_lpsp_capable (drm_fd, output))continue ;if (type ==SCREEN_TYPE_NON_LPSP && - c->connector_type == DRM_MODE_CONNECTOR_eDP) +i915_output_is_lpsp_capable (drm_fd, output))continue ; -if (c->connection ==DRM_MODE_CONNECTED && c->count_modes) { - connector = c; - mode = &c->modes[0 ]; -break ; - } + connector = c; + mode =igt_output_get_mode (output); +break ; } -if (!connector) +if (!connector || !mode)return false; igt_create_pattern_fb(drm_fd, mode->hdisplay, mode->vdisplay,@@ -397,6 +398,7 @@ static void init_mode_set_data(struct mode_set_data *data)kmstest_set_vt_graphics_mode (); } +igt_display_require (&data->display, drm_fd); data->devid =intel_get_drm_devid (drm_fd);init_modeset_cached_params (&ms_data); }@@ -410,6 +412,8 @@ static void fini_mode_set_data(struct mode_set_data *data) }drmModeFreeResources (data->res); } + +igt_display_fini (&data->display); }static void get_drm_info (struct compare_data *data)@@ -760,7 +764,7 @@ static void dump_file(int dir, const char *filename)free (contents); } -static bool setup_environment (void ) +static bool setup_environment (bool display_disabled) {if (has_runtime_pm) goto out;@@ -772,7 +776,8 @@ static bool setup_environment(void) debugfs =igt_debugfs_dir (drm_fd);igt_require (debugfs !=-1 ); -init_mode_set_data (&ms_data); +if (!display_disabled) +init_mode_set_data (&ms_data);igt_pm_enable_sata_link_power_management ();@@ -785,13 +790,14 @@ static bool setup_environment(void)igt_require (igt_pm_dmc_loaded (debugfs)); out: -disable_all_screens (&ms_data); +if (!display_disabled) +disable_all_screens (&ms_data);dump_file (debugfs,"i915_runtime_pm_status" );return wait_for_suspended (); } -static void teardown_environment (void ) +static void teardown_environment (bool display_disabled) {close (msr_fd);if (has_pc8)@@ -801,7 +807,8 @@ static void teardown_environment(void)igt_pm_restore_sata_link_power_management (); -fini_mode_set_data (&ms_data); +if (!display_disabled) +fini_mode_set_data (&ms_data);close (debugfs);close (drm_fd);@@ -2004,7 +2011,7 @@ static struct option long_options[] = { igt_main_args("", long_options, help_str, opt_handler, NULL) { igt_subtest("basic-rte") { -igt_assert (setup_environment ()); +igt_assert (setup_environment (false));basic_subtest (); }@@ -2012,7 +2019,7 @@ igt_main_args("", long_options, help_str, opt_handler, NULL)* PC8+. We don't want bug reports from cases where the machine is just * not properly configured. */ igt_fixture -igt_require (setup_environment ()); +igt_require (setup_environment (false ));if (stay)igt_subtest ("stay" )@@ -2142,7 +2149,7 @@ igt_main_args("", long_options, help_str, opt_handler, NULL) }igt_fixture -teardown_environment (); +teardown_environment (false ); igt_subtest("module-reload") {igt_debug ("Reload w/o display\n" );@@ -2151,9 +2158,9 @@ igt_main_args("", long_options, help_str, opt_handler, NULL)igt_kmsg (KMSG_INFO "Reloading i915 w/o display\n" );igt_assert_eq (igt_i915_driver_load ("disable_display=1 mmio_debug=-1" ),0 ); -igt_assert (setup_environment ()); +igt_assert (setup_environment (true));igt_assert (igt_wait (device_in_pci_d3 (),2000 ,100 )); -teardown_environment (); +teardown_environment (true);igt_debug ("Reload as normal\n" );igt_i915_driver_unload ();@@ -2161,11 +2168,11 @@ igt_main_args("", long_options, help_str, opt_handler, NULL)igt_kmsg (KMSG_INFO "Reloading i915 as normal\n" );igt_assert_eq (igt_i915_driver_load ("mmio_debug=-1" ),0 );
tests/i915/i915_pm_rpm.c igt_main_args("", long_options, help_str, opt_handler, NULL) · line 2178
Quoted 10 lines
tests/i915/i915_pm_rpm.c +2
-2-igt_assert (setup_environment ()); +igt_assert (setup_environment (false));igt_assert (igt_wait (device_in_pci_d3 (),2000 ,100 ));if (enable_one_screen_with_type (&ms_data,SCREEN_TYPE_ANY ))drm_resources_equal_subtest (); -teardown_environment (); +teardown_environment (false);/* Remove our mmio_debugging module */ igt_i915_driver_unload ();
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for lpsp platform agnostic support (rev9)
In reply to Anshuman Gupta== Series Details ==
== Series Details ==
Series: lpsp platform agnostic support (rev9)
URL : https://patchwork.freedesktop.org/series/74647/
State : success
== Summary ==
CI Bug Log - changes from IGT_5633 -> IGTPW_4534
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/index.html
Known issues
------------
Here are the changes found in IGTPW_4534 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_pm_rpm@module-reload:
- fi-kbl-8809g: [PASS][1] -> [SKIP][2] ([fdo#109271])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/fi-kbl-8809g/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/fi-kbl-8809g/igt@[email protected]
#### Possible fixes ####
* igt@i915_selftest@live@gt_pm:
- fi-bwr-2160: [INCOMPLETE][3] ([i915#489]) -> [PASS][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/fi-bwr-2160/igt@i915_selftest@live@gt_pm.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/fi-bwr-2160/igt@i915_selftest@live@gt_pm.html
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#489]: https://gitlab.freedesktop.org/drm/intel/issues/489
Participating hosts (50 -> 43)
------------------------------
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5633 -> IGTPW_4534
CI-20190529: 20190529
CI_DRM_8430: 2daa6f8cad645f49a898158190a20a893b4aabe3 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4534: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/index.html
IGT_5633: c8c2e5ed5cd8e4b7a69a903f3f1653612086abcc @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Testlist changes ==
+igt@i915_pm_lpsp@kms-lpsp
-igt@i915_pm_lpsp@edp-native
-igt@i915_pm_lpsp@edp-panel-fitter
-igt@i915_pm_lpsp@non-edp
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for lpsp platform agnostic support (rev9)
In reply to Anshuman Gupta== Series Details ==
== Series Details ==
Series: lpsp platform agnostic support (rev9)
URL : https://patchwork.freedesktop.org/series/74647/
State : success
== Summary ==
CI Bug Log - changes from IGT_5633_full -> IGTPW_4534_full
====================================================
Summary
-------
**WARNING**
Minor unknown changes coming with IGTPW_4534_full need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_4534_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_4534_full:
### IGT changes ###
#### Warnings ####
* igt@i915_pm_lpsp@screens-disabled:
- shard-tglb: [SKIP][1] ([fdo#109301]) -> [SKIP][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-tglb2/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-tglb6/igt@[email protected]
- shard-iclb: [SKIP][3] ([fdo#109301]) -> [SKIP][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-iclb4/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-iclb8/igt@[email protected]
New tests
---------
New tests have been introduced between IGT_5633_full and IGTPW_4534_full:
### New IGT tests (5) ###
* igt@i915_pm_lpsp@kms-lpsp:
- Statuses :
- Exec time: [None] s
* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp:
- Statuses : 2 skip(s)
- Exec time: [0.0] s
* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-edp:
- Statuses : 2 pass(s)
- Exec time: [0.10, 0.15] s
* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-hdmi-a:
- Statuses : 2 skip(s)
- Exec time: [0.0] s
* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-vga:
- Statuses : 2 skip(s)
- Exec time: [0.0] s
Known issues
------------
Here are the changes found in IGTPW_4534_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_busy@close-race:
- shard-hsw: [PASS][5] -> [INCOMPLETE][6] ([i915#61]) +1 similar issue
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-hsw1/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-hsw7/igt@[email protected]
* igt@i915_pm_lpsp@screens-disabled:
- shard-hsw: [PASS][7] -> [SKIP][8] ([fdo#109271])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-hsw5/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-hsw7/igt@[email protected]
* igt@i915_selftest@live@requests:
- shard-tglb: [PASS][9] -> [INCOMPLETE][10] ([i915#1531])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-tglb3/igt@i915_selftest@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-tglb8/igt@i915_selftest@[email protected]
* igt@kms_big_fb@linear-32bpp-rotate-180:
- shard-apl: [PASS][11] -> [FAIL][12] ([i915#1119] / [i915#95])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-apl8/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-apl6/igt@[email protected]
- shard-kbl: [PASS][13] -> [FAIL][14] ([i915#1119] / [i915#93] / [i915#95])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-kbl1/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-kbl6/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-suspend:
- shard-kbl: [PASS][15] -> [DMESG-WARN][16] ([i915#180]) +2 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-kbl2/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-kbl1/igt@[email protected]
* igt@kms_flip_tiling@flip-changes-tiling-yf:
- shard-kbl: [PASS][17] -> [FAIL][18] ([i915#699] / [i915#93] / [i915#95])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-kbl6/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-kbl1/igt@[email protected]
- shard-apl: [PASS][19] -> [FAIL][20] ([i915#95])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-apl7/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-apl3/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-b-planes:
- shard-apl: [PASS][21] -> [DMESG-WARN][22] ([i915#180]) +3 similar issues
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-apl8/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-apl4/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-a-constant-alpha-min:
- shard-kbl: [PASS][23] -> [FAIL][24] ([fdo#108145] / [i915#265] / [i915#93] / [i915#95])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-kbl4/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-kbl4/igt@[email protected]
- shard-apl: [PASS][25] -> [FAIL][26] ([fdo#108145] / [i915#265] / [i915#95])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-apl2/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-apl8/igt@[email protected]
* igt@kms_psr@psr2_primary_mmap_cpu:
- shard-iclb: [PASS][27] -> [SKIP][28] ([fdo#109441]) +1 similar issue
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-iclb2/igt@kms_psr@psr2_primary_mmap_cpu.html
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-iclb5/igt@kms_psr@psr2_primary_mmap_cpu.html
* igt@kms_vblank@pipe-b-query-idle-hang:
- shard-kbl: [PASS][29] -> [INCOMPLETE][30] ([i915#95])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-kbl4/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-kbl4/igt@[email protected]
#### Possible fixes ####
* igt@gem_softpin@noreloc-s3:
- shard-kbl: [DMESG-WARN][31] ([i915#180]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-kbl4/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-kbl6/igt@[email protected]
* igt@kms_draw_crc@draw-method-xrgb8888-mmap-cpu-untiled:
- shard-kbl: [FAIL][33] ([i915#177] / [i915#52] / [i915#54] / [i915#93] / [i915#95]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-kbl7/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-kbl3/igt@[email protected]
- shard-apl: [FAIL][35] ([i915#52] / [i915#54] / [i915#95]) -> [PASS][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-apl6/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-apl3/igt@[email protected]
* {igt@kms_flip@flip-vs-suspend@b-vga1}:
- shard-snb: [DMESG-WARN][37] -> [PASS][38]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-snb6/igt@kms_flip@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-snb6/igt@kms_flip@[email protected]
* igt@kms_flip_tiling@flip-changes-tiling:
- shard-kbl: [FAIL][39] ([i915#699] / [i915#93] / [i915#95]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-kbl4/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-kbl3/igt@[email protected]
* igt@kms_hdmi_inject@inject-audio:
- shard-tglb: [SKIP][41] ([i915#433]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-tglb1/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-tglb6/igt@[email protected]
- shard-iclb: [SKIP][43] ([i915#433]) -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-iclb5/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-iclb4/igt@[email protected]
* igt@kms_plane_cursor@pipe-a-viewport-size-64:
- shard-kbl: [FAIL][45] ([i915#1559] / [i915#93] / [i915#95]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-kbl7/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-kbl2/igt@[email protected]
- shard-apl: [FAIL][47] ([i915#1559] / [i915#95]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-apl7/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-apl4/igt@[email protected]
* {igt@kms_prime@basic-crc@second-to-first}:
- shard-apl: [FAIL][49] ([i915#95]) -> [PASS][50] +1 similar issue
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-apl6/igt@kms_prime@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-apl2/igt@kms_prime@[email protected]
- shard-kbl: [FAIL][51] ([i915#93] / [i915#95]) -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-kbl7/igt@kms_prime@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-kbl7/igt@kms_prime@[email protected]
* igt@kms_psr@psr2_sprite_plane_move:
- shard-iclb: [SKIP][53] ([fdo#109441]) -> [PASS][54] +2 similar issues
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-iclb8/igt@kms_psr@psr2_sprite_plane_move.html
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html
* igt@kms_vblank@pipe-b-ts-continuation-suspend:
- shard-apl: [DMESG-WARN][55] ([i915#180]) -> [PASS][56]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-apl8/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-apl8/igt@[email protected]
* {igt@perf@polling-parameterized}:
- shard-hsw: [FAIL][57] ([i915#1542]) -> [PASS][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-hsw6/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-hsw1/igt@[email protected]
#### Warnings ####
* igt@kms_content_protection@atomic-dpms:
- shard-apl: [FAIL][59] ([fdo#110321] / [fdo#110336] / [i915#95]) -> [FAIL][60] ([fdo#110321] / [fdo#110336])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-apl8/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-apl7/igt@[email protected]
* igt@kms_sysfs_edid_timing:
- shard-apl: [FAIL][61] ([IGT#2]) -> [FAIL][62] ([IGT#2] / [i915#95])
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_5633/shard-apl7/igt@kms_sysfs_edid_timing.html
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/shard-apl8/igt@kms_sysfs_edid_timing.html
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[IGT#2]: https://gitlab.freedesktop.org/drm/igt-gpu-tools/issues/2
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109301]: https://bugs.freedesktop.org/show_bug.cgi?id=109301
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110321]: https://bugs.freedesktop.org/show_bug.cgi?id=110321
[fdo#110336]: https://bugs.freedesktop.org/show_bug.cgi?id=110336
[i915#1119]: https://gitlab.freedesktop.org/drm/intel/issues/1119
[i915#1531]: https://gitlab.freedesktop.org/drm/intel/issues/1531
[i915#1542]: https://gitlab.freedesktop.org/drm/intel/issues/1542
[i915#1559]: https://gitlab.freedesktop.org/drm/intel/issues/1559
[i915#177]: https://gitlab.freedesktop.org/drm/intel/issues/177
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
[i915#433]: https://gitlab.freedesktop.org/drm/intel/issues/433
[i915#52]: https://gitlab.freedesktop.org/drm/intel/issues/52
[i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
[i915#61]: https://gitlab.freedesktop.org/drm/intel/issues/61
[i915#699]: https://gitlab.freedesktop.org/drm/intel/issues/699
[i915#93]: https://gitlab.freedesktop.org/drm/intel/issues/93
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (8 -> 8)
------------------------------
No changes in participating hosts
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_5633 -> IGTPW_4534
CI-20190529: 20190529
CI_DRM_8430: 2daa6f8cad645f49a898158190a20a893b4aabe3 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_4534: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/index.html
IGT_5633: c8c2e5ed5cd8e4b7a69a903f3f1653612086abcc @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4534/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev