Skip to contentSkip to conversation

Limit to raw Ethernet QPs for raw ETH profile

PATCH Applied Leon Romanovsky 2 participants 4 messages May 6, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover Limit to raw Ethernet QPs for raw ETH profile

From: Leon Romanovsky <[email protected]>

Hi,

This is a fix to restrict opening any other QP types except RAW_PACKET if we are using raw ETH profile.

Thanks

Mark Bloch (2):
RDMA/mlx5: Assign profile before calling stages RDMA/mlx5: Allow only raw Ethernet QPs when RoCE isn't enabled

 drivers/infiniband/hw/mlx5/ib_rep.h |  2 +-
 drivers/infiniband/hw/mlx5/main.c   |  3 ++-
 drivers/infiniband/hw/mlx5/qp.c     | 12 +++++++++---
 3 files changed, 12 insertions(+), 5 deletions(-)

--
2.26.2

#1 lore raw

PATCH 1/2 RDMA/mlx5: Assign profile before calling stages

From: Mark Bloch <[email protected]>

Assign the profile to the IB device before executing stages. This will allow to check which profile is being used from within a stage.

---
 drivers/infiniband/hw/mlx5/ib_rep.h | 2 +-
 drivers/infiniband/hw/mlx5/main.c   | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)
drivers/infiniband/hw/mlx5/ib_rep.h +1 -1
index 3b6750cba796..5b30d3fa8f8d 100644
@@ -9,9 +9,9 @@
 #include <linux/mlx5/eswitch.h>
 #include "mlx5_ib.h"
 
-#ifdef CONFIG_MLX5_ESWITCH
 extern const struct mlx5_ib_profile raw_eth_profile;
 
+#ifdef CONFIG_MLX5_ESWITCH
 u8 mlx5_ib_eswitch_mode(struct mlx5_eswitch *esw);
 struct mlx5_ib_dev *mlx5_ib_get_rep_ibdev(struct mlx5_eswitch *esw,
 					  u16 vport_num);
drivers/infiniband/hw/mlx5/main.c +2 -1
index c5f5aeea82b0..65790e2b442c 100644
@@ -7131,6 +7131,8 @@ void *__mlx5_ib_add(struct mlx5_ib_dev *dev,
 	int err;
 	int i;
 
+	dev->profile = profile;
+
 	for (i = 0; i < MLX5_IB_STAGE_MAX; i++) {
 		if (profile->stage[i].init) {
 			err = profile->stage[i].init(dev);
@@ -7139,7 +7141,6 @@ void *__mlx5_ib_add(struct mlx5_ib_dev *dev,
 		}
 	}
 
-	dev->profile = profile;
 	dev->ib_active = true;
 
 	return dev;
Signature · 1 line
2.26.2
#2 lore raw

PATCH 2/2 RDMA/mlx5: Allow only raw Ethernet QPs when RoCE isn't enabled

In reply to Leon Romanovsky

From: Mark Bloch <[email protected]>

When operating in switchdev mode or using devlink to disable RoCE only raw Ethernet QPs are allowed to be created.

When in switchdev mode this can lead to passing an invalid port number as part of the modify qp firmware cmd and will lead to a syndrome reported back to the user, such as:

* mlx5_cmd_check:803:(pid 50148): RST2INIT_QP(0x502) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x177405).

Internal UD QP might be used to test for write combining support (even if externally we report RoCE as disabled) check for that specific flag and allow is specifically.

Fixes b5ca15ad7e61 ("IB/mlx5: Add proper representors support")
---
 drivers/infiniband/hw/mlx5/qp.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/infiniband/hw/mlx5/qp.c +9 -3
index fb2ea3bf9be4..40150595fdbb 100644
@@ -2436,15 +2436,17 @@ static int check_qp_type(struct mlx5_ib_dev *dev, struct ib_qp_init_attr *attr,
 		if (!MLX5_CAP_GEN(dev->mdev, xrc))
 			goto out;
 		fallthrough;
-	case IB_QPT_RAW_PACKET:
 	case IB_QPT_RC:
 	case IB_QPT_UC:
-	case IB_QPT_UD:
 	case IB_QPT_SMI:
 	case MLX5_IB_QPT_HW_GSI:
-	case MLX5_IB_QPT_REG_UMR:
 	case IB_QPT_DRIVER:
 	case IB_QPT_GSI:
+		if (dev->profile == &raw_eth_profile)
+			goto out;
+	case IB_QPT_RAW_PACKET:
+	case IB_QPT_UD:
+	case MLX5_IB_QPT_REG_UMR:
 		break;
 	default:
 		goto out;
@@ -2641,6 +2643,10 @@ static int process_create_flags(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
 	int create_flags = attr->create_flags;
 	bool cond;
 
+	if (qp->type == IB_QPT_UD && dev->profile == &raw_eth_profile)
+		if (create_flags & ~MLX5_IB_QP_CREATE_WC_TEST)
+			return -EINVAL;
+
 	if (qp_type == MLX5_IB_QPT_DCT)
 		return (create_flags) ? -EINVAL : 0;
 

--
2.26.2

#3 lore raw
In reply to Leon Romanovsky
Quoted 9 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Hi,

This is a fix to restrict opening any other QP types except RAW_PACKET if we are using raw ETH profile.

Thanks

Quoted 8 lines

Mark Bloch (2):
RDMA/mlx5: Assign profile before calling stages RDMA/mlx5: Allow only raw Ethernet QPs when RoCE isn't enabled

 drivers/infiniband/hw/mlx5/ib_rep.h |  2 +-
 drivers/infiniband/hw/mlx5/main.c   |  3 ++-
 drivers/infiniband/hw/mlx5/qp.c     | 12 +++++++++---
 3 files changed, 12 insertions(+), 5 deletions(-)

Applied to for-next, thanks

Jason