Skip to contentSkip to conversation

HID: i2c-hid: add Schneider SCL142ALM to descriptor override

PATCH Applied Julian Sax 3 participants 3 messages May 5, 2020 – May 6, 2020

Subsystems (2)
lore
Share & tools
lore

Julian Sax

author
#0 lore raw

PATCH 1/1 HID: i2c-hid: add Schneider SCL142ALM to descriptor override

This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list.

---
 drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c +8 -0
index a66f08041a1a..ec142bc8c1da 100644
@@ -389,6 +389,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = {
 		},
 		.driver_data = (void *)&sipodev_desc
 	},
+	{
+		.ident = "Schneider SCL142ALM",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SCHNEIDER"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "SCL142ALM"),
+		},
+		.driver_data = (void *)&sipodev_desc
+	},
 	{ }	/* Terminate list */
 };
 

--
2.26.2

maintainer Applied
#1 lore raw
Quoted 2 lines · Julian Sax

This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list.

Applied, thanks.

Signature · 2 lines
Jiri Kosina
SUSE Labs
maintainer
#2 lore raw
In reply to Julian Sax

Hi

[This is an automated email]

This commit has been processed because it contains a -stable tag. The stable tag indicates that it's relevant for the following trees: all

The bot has tested the following trees: v5.6.10, v5.4.38, v4.19.120, v4.14.178, v4.9.221, v4.4.221.

v5.6.10: Build OK!
v5.4.38: Build OK!
v4.19.120: Failed to apply! Possible dependencies:
eb6964fa6509 ("HID: i2c-hid: add iBall Aer3 to descriptor override")

v4.14.178: Failed to apply! Possible dependencies:
eb6964fa6509 ("HID: i2c-hid: add iBall Aer3 to descriptor override")

v4.9.221: Failed to apply! Possible dependencies:
eb6964fa6509 ("HID: i2c-hid: add iBall Aer3 to descriptor override")

v4.4.221: Failed to apply! Possible dependencies:
00f7fea5da49 ("HID: i2c-hid: force the IRQ level trigger only when not set") 01714a6f5fa5 ("HID: i2c-hid: Fix suspend/resume when already runtime suspended") 070b9637dd8f ("HID: i2c-hid: Add RESEND_REPORT_DESCR quirk for Toshiba Click Mini L9W-B") 2dcc8197fefc ("HID: i2c-hid: Silently fail probe for CHPN0001 touchscreen") 3e83eda46705 ("HID: i2c-hid: Fix resume issue on Raydium touchscreen device") 402946a8ef71 ("HID: i2c-hid: Add no-irq-after-reset quirk for 0911:5288 device") 572d3c644497 ("HID: i2c-hid: support regulator power on/off")
71af01a8c85a ("HID: i2c-hid: add a simple quirk to fix device defects") 85ae91133152 ("HID: i2c-hid: remove custom locking from i2c_hid_open/close") 8cd16166b000 ("HID: fix missing irq field")
91b9ae48aadd ("HID: i2c-hid: move header file out of I2C realm") 94116f8126de ("ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()") 9a327405014f ("HID: i2c-hid: Prevent sending reports from racing with device reset") 9ee3e06610fd ("HID: i2c-hid: override HID descriptors for certain devices") b59dfdaef173 ("i2c-hid: properly terminate i2c_hid_dmi_desc_override_table[] array") b7fe92999a98 ("ACPI / extlog: Switch to use new generic UUID API") ba1660f1791f ("HID: i2c-hid: fix build")
ba18a9314a94 ("Revert "HID: i2c-hid: Add support for ACPI GPIO interrupts"") d46ddc593f4d ("HID: i2c-hid: Disable IRQ before freeing buffers") eb6964fa6509 ("HID: i2c-hid: add iBall Aer3 to descriptor override") f8f807441eef ("HID: i2c-hid: Add Odys Winbook 13 to descriptor override") fc2237a724a9 ("HID: introduce hid_is_using_ll_driver")

NOTE: The patch will not be queued to stable trees until it is upstream.

How should we proceed with this patch?

Signature · 2 lines
Thanks
Sasha