Skip to contentSkip to conversation

mtd: lpddr: fix excessive stack usage with clang

PATCH Applied Arnd Bergmann 3 participants 4 messages May 5, 2020 – Sep 7, 2020 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mtd: lpddr: fix excessive stack usage with clang

Building lpddr2_nvm with clang can result in a giant stack usage in one function:

drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=]

The problem is that clang decides to build a copy of the mtd_info structure on the stack and then do a memcpy() into the actual version. It shouldn't really do it that way, but it's not strictly a bug either.

As a workaround, use a static const version of the structure to assign most of the members upfront and then only set the few members that require runtime knowledge at probe time.

Fixes 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")
---
 drivers/mtd/lpddr/lpddr2_nvm.c | 35 ++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)
drivers/mtd/lpddr/lpddr2_nvm.c +19 -16
index 0f1547f09d08..72f5c7b30079 100644
@@ -393,6 +393,17 @@ static int lpddr2_nvm_lock(struct mtd_info *mtd, loff_t start_add,
 	return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_LOCK);
 }
 
+static const struct mtd_info lpddr2_nvm_mtd_info = {
+	.type		= MTD_RAM,
+	.writesize	= 1,
+	.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
+	._read		= lpddr2_nvm_read,
+	._write		= lpddr2_nvm_write,
+	._erase		= lpddr2_nvm_erase,
+	._unlock	= lpddr2_nvm_unlock,
+	._lock		= lpddr2_nvm_lock,
+};
+
 /*
  * lpddr2_nvm driver probe method
  */
@@ -433,6 +444,7 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		.pfow_base	= OW_BASE_ADDRESS,
 		.fldrv_priv	= pcm_data,
 	};
+
 	if (IS_ERR(map->virt))
 		return PTR_ERR(map->virt);
 
@@ -444,22 +456,13 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		return PTR_ERR(pcm_data->ctl_regs);
 
 	/* Populate mtd_info data structure */
-	*mtd = (struct mtd_info) {
-		.dev		= { .parent = &pdev->dev },
-		.name		= pdev->dev.init_name,
-		.type		= MTD_RAM,
-		.priv		= map,
-		.size		= resource_size(add_range),
-		.erasesize	= ERASE_BLOCKSIZE * pcm_data->bus_width,
-		.writesize	= 1,
-		.writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width,
-		.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
-		._read		= lpddr2_nvm_read,
-		._write		= lpddr2_nvm_write,
-		._erase		= lpddr2_nvm_erase,
-		._unlock	= lpddr2_nvm_unlock,
-		._lock		= lpddr2_nvm_lock,
-	};
+	*mtd = lpddr2_nvm_mtd_info;
+	mtd->dev.parent		= &pdev->dev;
+	mtd->name		= pdev->dev.init_name;
+	mtd->priv		= map;
+	mtd->size		= resource_size(add_range);
+	mtd->erasesize		= ERASE_BLOCKSIZE * pcm_data->bus_width;
+	mtd->writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width;
 
 	/* Verify the presence of the device looking for PFOW string */
 	if (!lpddr2_nvm_pfow_present(map)) {
Signature · 1 line
2.26.0
Reviewed-by on v1 1/1
#1 lore raw
Quoted 9 lines · Arnd Bergmann

Building lpddr2_nvm with clang can result in a giant stack usage in one function:

drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=]

The problem is that clang decides to build a copy of the mtd_info structure on the stack and then do a memcpy() into the actual version. It shouldn't really do it that way, but it's not strictly a bug either.

Quoted 6 lines

As a workaround, use a static const version of the structure to assign most of the members upfront and then only set the few members that require runtime knowledge at probe time.

Fixes 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")
Quoted 67 lines
---
 drivers/mtd/lpddr/lpddr2_nvm.c | 35 ++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)
drivers/mtd/lpddr/lpddr2_nvm.c +19 -16
index 0f1547f09d08..72f5c7b30079 100644
@@ -393,6 +393,17 @@ static int lpddr2_nvm_lock(struct mtd_info *mtd, loff_t start_add,
 	return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_LOCK);
 }
 
+static const struct mtd_info lpddr2_nvm_mtd_info = {
+	.type		= MTD_RAM,
+	.writesize	= 1,
+	.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
+	._read		= lpddr2_nvm_read,
+	._write		= lpddr2_nvm_write,
+	._erase		= lpddr2_nvm_erase,
+	._unlock	= lpddr2_nvm_unlock,
+	._lock		= lpddr2_nvm_lock,
+};
+
 /*
  * lpddr2_nvm driver probe method
  */
@@ -433,6 +444,7 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		.pfow_base	= OW_BASE_ADDRESS,
 		.fldrv_priv	= pcm_data,
 	};
+
 	if (IS_ERR(map->virt))
 		return PTR_ERR(map->virt);
 
@@ -444,22 +456,13 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		return PTR_ERR(pcm_data->ctl_regs);
 
 	/* Populate mtd_info data structure */
-	*mtd = (struct mtd_info) {
-		.dev		= { .parent = &pdev->dev },
-		.name		= pdev->dev.init_name,
-		.type		= MTD_RAM,
-		.priv		= map,
-		.size		= resource_size(add_range),
-		.erasesize	= ERASE_BLOCKSIZE * pcm_data->bus_width,
-		.writesize	= 1,
-		.writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width,
-		.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
-		._read		= lpddr2_nvm_read,
-		._write		= lpddr2_nvm_write,
-		._erase		= lpddr2_nvm_erase,
-		._unlock	= lpddr2_nvm_unlock,
-		._lock		= lpddr2_nvm_lock,
-	};
+	*mtd = lpddr2_nvm_mtd_info;
+	mtd->dev.parent		= &pdev->dev;
+	mtd->name		= pdev->dev.init_name;
+	mtd->priv		= map;
+	mtd->size		= resource_size(add_range);
+	mtd->erasesize		= ERASE_BLOCKSIZE * pcm_data->bus_width;
+	mtd->writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width;
 
 	/* Verify the presence of the device looking for PFOW string */
 	if (!lpddr2_nvm_pfow_present(map)) {
Signature · 1 line
2.26.0
maintainer Acked-by
#2 lore raw

Nathan Chancellor <[email protected]> wrote on Tue, 5 May 2020 19:38:28 -0700:

Quoted 10 lines · Arnd Bergmann
Quoted 9 lines

Building lpddr2_nvm with clang can result in a giant stack usage in one function:

drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=]

The problem is that clang decides to build a copy of the mtd_info structure on the stack and then do a memcpy() into the actual version. It shouldn't really do it that way, but it's not strictly a bug either.

Quoted 8 lines
Quoted 6 lines

As a workaround, use a static const version of the structure to assign most of the members upfront and then only set the few members that require runtime knowledge at probe time.

Fixes 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")
Quoted 68 lines
Quoted 68 lines
---
 drivers/mtd/lpddr/lpddr2_nvm.c | 35 ++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)
drivers/mtd/lpddr/lpddr2_nvm.c +19 -16
index 0f1547f09d08..72f5c7b30079 100644
@@ -393,6 +393,17 @@ static int lpddr2_nvm_lock(struct mtd_info *mtd, loff_t start_add,
 	return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_LOCK);
 }
 
+static const struct mtd_info lpddr2_nvm_mtd_info = {
+	.type		= MTD_RAM,
+	.writesize	= 1,
+	.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
+	._read		= lpddr2_nvm_read,
+	._write		= lpddr2_nvm_write,
+	._erase		= lpddr2_nvm_erase,
+	._unlock	= lpddr2_nvm_unlock,
+	._lock		= lpddr2_nvm_lock,
+};
+
 /*
  * lpddr2_nvm driver probe method
  */
@@ -433,6 +444,7 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		.pfow_base	= OW_BASE_ADDRESS,
 		.fldrv_priv	= pcm_data,
 	};
+
 	if (IS_ERR(map->virt))
 		return PTR_ERR(map->virt);
 
@@ -444,22 +456,13 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		return PTR_ERR(pcm_data->ctl_regs);
 
 	/* Populate mtd_info data structure */
-	*mtd = (struct mtd_info) {
-		.dev		= { .parent = &pdev->dev },
-		.name		= pdev->dev.init_name,
-		.type		= MTD_RAM,
-		.priv		= map,
-		.size		= resource_size(add_range),
-		.erasesize	= ERASE_BLOCKSIZE * pcm_data->bus_width,
-		.writesize	= 1,
-		.writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width,
-		.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
-		._read		= lpddr2_nvm_read,
-		._write		= lpddr2_nvm_write,
-		._erase		= lpddr2_nvm_erase,
-		._unlock	= lpddr2_nvm_unlock,
-		._lock		= lpddr2_nvm_lock,
-	};
+	*mtd = lpddr2_nvm_mtd_info;
+	mtd->dev.parent		= &pdev->dev;
+	mtd->name		= pdev->dev.init_name;
+	mtd->priv		= map;
+	mtd->size		= resource_size(add_range);
+	mtd->erasesize		= ERASE_BLOCKSIZE * pcm_data->bus_width;
+	mtd->writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width;
 
 	/* Verify the presence of the device looking for PFOW string */
 	if (!lpddr2_nvm_pfow_present(map)) {
Signature · 1 line
2.26.0
maintainer Applied
#3 lore raw
In reply to Arnd Bergmann
Quoted 9 lines · Arnd Bergmann

Building lpddr2_nvm with clang can result in a giant stack usage in one function:

drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=]

The problem is that clang decides to build a copy of the mtd_info structure on the stack and then do a memcpy() into the actual version. It shouldn't really do it that way, but it's not strictly a bug either.

Quoted 8 lines

As a workaround, use a static const version of the structure to assign most of the members upfront and then only set the few members that require runtime knowledge at probe time.

Fixes 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Miquel