Skip to contentSkip to conversation

cmd: cache: Fix non-cached memory cachability

PATCH New Patrice Chotard 3 participants 3 messages Apr 28, 2020 – May 7, 2020 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 cmd: cache: Fix non-cached memory cachability

If dcache is switched OFF to ON state and if non-cached memory is used, this non-cached memory must be re-declared as uncached to mmu each time dcache is set ON.

Introduce noncached_set_region() to set this non-cached region's mmu settings. Let architecture override it by defining it as a weak function.

For ARM architecture, noncached_set_region() defines all noncached region as non-cacheable.

Issue found on STM32MP1 platform using dwc_eth_qos ethernet driver, when going from dcache OFF to dcache ON state, ethernet driver issued TX timeout errors when performing dhcp or ping.

It can be reproduced with the following sequence:

dhcp
while true ; do
ping 192.168.1.300 ;
dcache off ;
ping 192.168.1.300 ;
dcache on ;
done

Cc Marek Vasut <[email protected]>
Cc Joe Hershberger <[email protected]>
Cc Ramon Fried <[email protected]>
Cc Stephen Warren <[email protected]>

---

Changes in v2:
- make noncached_set_region a weak function

 arch/arm/lib/cache.c | 13 ++++++++++---
 cmd/cache.c          |  5 +++++
 2 files changed, 15 insertions(+), 3 deletions(-)
arch/arm/lib/cache.c +10 -3
index 44dde26065..224f2aef14 100644
@@ -75,6 +75,15 @@ static unsigned long noncached_start;
 static unsigned long noncached_end;
 static unsigned long noncached_next;
 
+void noncached_set_region(void)
+{
+#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
+	mmu_set_region_dcache_behaviour(noncached_start,
+					noncached_end - noncached_start,
+					DCACHE_OFF);
+#endif
+}
+
 void noncached_init(void)
 {
 	phys_addr_t start, end;
@@ -91,9 +100,7 @@ void noncached_init(void)
 	noncached_end = end;
 	noncached_next = start;
 
-#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
-	mmu_set_region_dcache_behaviour(noncached_start, size, DCACHE_OFF);
-#endif
+	noncached_set_region();
 }
 
 phys_addr_t noncached_alloc(size_t size, size_t align)
cmd/cache.c +5 -0
index 27dcec0931..7678615dd8 100644
@@ -20,6 +20,10 @@ void __weak invalidate_icache_all(void)
 	puts("No arch specific invalidate_icache_all available!\n");
 }
 
+__weak void noncached_set_region(void)
+{
+}
+
 static int do_icache(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	switch (argc) {
@@ -64,6 +68,7 @@ static int do_dcache(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			break;
 		case 1:
 			dcache_enable();
+			noncached_set_region();
 			break;
 		case 2:
 			flush_dcache_all();
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/1 cmd: cache: Fix non-cached memory cachability

Quoted 31 lines · Patrice Chotard

If dcache is switched OFF to ON state and if non-cached memory is used, this non-cached memory must be re-declared as uncached to mmu each time dcache is set ON.

Introduce noncached_set_region() to set this non-cached region's mmu settings. Let architecture override it by defining it as a weak function.

For ARM architecture, noncached_set_region() defines all noncached region as non-cacheable.

Issue found on STM32MP1 platform using dwc_eth_qos ethernet driver, when going from dcache OFF to dcache ON state, ethernet driver issued TX timeout errors when performing dhcp or ping.

It can be reproduced with the following sequence:

dhcp
while true ; do
ping 192.168.1.300 ;
dcache off ;
ping 192.168.1.300 ;
dcache on ;
done

Cc Marek Vasut <[email protected]>
Cc Joe Hershberger <[email protected]>
Cc Ramon Fried <[email protected]>
Cc Stephen Warren <[email protected]>
Quoted 8 lines

---

Changes in v2:
- make noncached_set_region a weak function

 arch/arm/lib/cache.c | 13 ++++++++++---
 cmd/cache.c          |  5 +++++
 2 files changed, 15 insertions(+), 3 deletions
#2 lore raw

PATCH v2 1/1 cmd: cache: Fix non-cached memory cachability

In reply to Patrice Chotard
Quoted 25 lines · Patrice Chotard

If dcache is switched OFF to ON state and if non-cached memory is used, this non-cached memory must be re-declared as uncached to mmu each time dcache is set ON.

Introduce noncached_set_region() to set this non-cached region's mmu settings. Let architecture override it by defining it as a weak function.

For ARM architecture, noncached_set_region() defines all noncached region as non-cacheable.

Issue found on STM32MP1 platform using dwc_eth_qos ethernet driver, when going from dcache OFF to dcache ON state, ethernet driver issued TX timeout errors when performing dhcp or ping.

It can be reproduced with the following sequence:

dhcp
while true ; do
ping 192.168.1.300 ;
dcache off ;
ping 192.168.1.300 ;
dcache on ;
done

Quoted 6 lines
Cc Marek Vasut <[email protected]>
Cc Joe Hershberger <[email protected]>
Cc Ramon Fried <[email protected]>
Cc Stephen Warren <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200507/3cb3219c/attachment.sig>