drm/amd/powerplay: report correct AC/DC event based on ctxid V2
Subsystems (2)
PATCH 1/1 drm/amd/powerplay: report correct AC/DC event based on ctxid V2
'ctxid' is used to distinguish different events raised from SMC. 0x3 and 0x4 are for AC and DC power mode.
V2: update the way to retrieve the ctxid and change the log level
to debug
Change-Id I7dbcb053fe9cea7c70e0a33afc2115b3745f6186
Signed-off-by Evan Quan <[email protected]>
Reviewed-by Alex Deucher <[email protected]>
--- drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/powerplay/smu_v11_0.c +17 -2
@@ -1522,6 +1522,11 @@ static int smu_v11_0_irq_process(struct amdgpu_device *adev, {uint32_t client_id = entry->client_id;uint32_t src_id = entry->src_id; +/* +* ctxid is used to distinguish different +* events for SMCToHost interrupt. +*/ +uint32_t ctxid = entry->src_data[0 ];if (client_id ==SOC15_IH_CLIENTID_THM ) {switch (src_id) {
@@ -1547,8 +1552,18 @@ static int smu_v11_0_irq_process(struct amdgpu_device *adev, } }else if (client_id ==SOC15_IH_CLIENTID_MP1 ) { -if (src_id ==0xfe ) -smu_v11_0_ack_ac_dc_interrupt (&adev->smu); +if (src_id ==0xfe ) { +switch (ctxid) { +case 0x3 : +dev_dbg (adev->dev,"Switched to AC mode!\n" ); +smu_v11_0_ack_ac_dc_interrupt (&adev->smu); +break ; +case 0x4 : +dev_dbg (adev->dev,"Switched to DC mode!\n" ); +smu_v11_0_ack_ac_dc_interrupt (&adev->smu); +break ; + } + } }return 0 ;
Signature · 6 lines
2.26.2 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx