5.6.12-rc1 review

This is the start of the stable review cycle for the 5.6.12 release. There are 49 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun, 10 May 2020 12:29:44 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.12-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.6.12-rc1

Will Deacon <[email protected]>
mm/mremap: Add comment explaining the untagging behaviour of mremap()

Jiri Slaby <[email protected]>
cgroup, netclassid: remove double cond_resched

Thomas Pedersen <[email protected]>

    mac80211: add ieee80211_is_any_nullfunc()

Rafael J. Wysocki <[email protected]>
ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()

Hans de Goede <[email protected]>
platform/x86: GPD pocket fan: Fix error message when temp-limits are out of range

Qian Cai <[email protected]>
x86/kvm: fix a missing-prototypes "vmread_error"

Takashi Iwai <[email protected]>
ALSA: hda: Match both PCI ID and SSID for driver blacklist

Aaron Ma <[email protected]>
drm/amdgpu: Fix oops when pp_funcs is unset in ACPI event

Jere Leppänen <[email protected]>
sctp: Fix SHUTDOWN CTSN Ack in the peer restart case

Andrii Nakryiko <[email protected]>
tools/runqslower: Ensure own vmlinux.h is picked up first

Doug Berger <[email protected]>
net: systemport: suppress warnings on failed Rx SKB allocations

Doug Berger <[email protected]>
net: bcmgenet: suppress warnings on failed Rx SKB allocations

Madhuparna Bhowmik <[email protected]>
mac80211: sta_info: Add lockdep condition for RCU list usage

Nathan Chancellor <[email protected]>
lib/mpi: Fix building for powerpc with clang

Russell King <[email protected]>
net: phy: bcm84881: clear settings on link down

Steven Rostedt (VMware) <[email protected]>
ftrace: Fix memory leak caused by not freeing entry in unregister_ftrace_direct()

Vamshi K Sthambamkadi <[email protected]>
tracing: Fix memory leaks in trace_events_hist.c

Paulo Alcantara <[email protected]>
cifs: do not share tcons with DFS

Jeremie Francois (on alpha) <[email protected]>
scripts/config: allow colons in option strings for sed

Ronnie Sahlberg <[email protected]>

    cifs: protect updating server->dstaddr with a spinlock

Matthias Blankertz <[email protected]>
ASoC: rsnd: Fix "status check failed" spam for multi-SSI

Matthias Blankertz <[email protected]>
ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent

Julien Beraud <[email protected]>
net: stmmac: Fix sub-second increment

Julien Beraud <[email protected]>
net: stmmac: fix enabling socfpga's ptp_ref_clock

Xiyu Yang <[email protected]>
wimax/i2400m: Fix potential urb refcnt leak

Sandeep Raghuraman <[email protected]>
drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii)

Prike Liang <[email protected]>
drm/amd/powerplay: fix resume failed as smu table initialize early exit

Alex Elder <[email protected]>
remoteproc: qcom_q6v5_mss: fix a bug in q6v5_probe()

Amadeusz Sławiński <[email protected]>
ASoC: codecs: hdac_hdmi: Fix incorrect use of list_for_each_entry

Matthias Blankertz <[email protected]>
ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode

Matthias Blankertz <[email protected]>
ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode

Thinh Nguyen <[email protected]>
usb: dwc3: gadget: Properly set maxpacket limit

Amadeusz Sławiński <[email protected]>
ASoC: topology: Fix endianness issue

Sebastian Reichel <[email protected]>
ASoC: sgtl5000: Fix VAG power-on handling

Wu Bo <[email protected]>
scsi: sg: add sg_remove_request in sg_write

Vasily Khoruzhick <[email protected]>
drm/bridge: anx6345: set correct BPC for display_info of connector

Tyler Hicks <[email protected]>
selftests/ipc: Fix test failure seen after initial test run

Jarkko Sakkinen <[email protected]>
Revert "Kernel selftests: tpm2: check for tpm support"

Sandipan Das <[email protected]>
selftests: vm: Fix 64-bit test builds for powerpc64le

Sandipan Das <[email protected]>
selftests: vm: Do not override definition of ARCH

Yihao Wu <[email protected]>
SUNRPC/cache: Fix unsafe traverse caused double-free in cache_purge

Amadeusz Sławiński <[email protected]>
ASoC: topology: Check return value of soc_tplg_dai_config

Amadeusz Sławiński <[email protected]>
ASoC: topology: Check return value of pcm_new_ver

Amadeusz Sławiński <[email protected]>
ASoC: topology: Check soc_tplg_add_route return value

Amadeusz Sławiński <[email protected]>
ASoC: topology: Check return value of soc_tplg_*_create

Amadeusz Sławiński <[email protected]>
ASoC: topology: Check return value of soc_tplg_create_tlv

Amadeusz Sławiński <[email protected]>
ASoC: topology: Add missing memory checks

Marek Szyprowski <[email protected]>
drm/bridge: analogix_dp: Split bind() into probe() and real bind()

Jia He <[email protected]>
vhost: vsock: kick send_pkt worker once device is started

-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/x86/kvm/vmx/ops.h                             |   1 +
 drivers/acpi/sleep.c                               |   5 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c             |   3 +-
 .../gpu/drm/amd/powerplay/hwmgr/processpptables.c  |  26 +++++
 drivers/gpu/drm/amd/powerplay/renoir_ppt.c         |   7 +-
 drivers/gpu/drm/bridge/analogix/analogix-anx6345.c |   3 +
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c |  33 ++++--
 drivers/gpu/drm/exynos/exynos_dp.c                 |  29 +++---
 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    |  36 ++++---
 drivers/net/ethernet/broadcom/bcmsysport.c         |   3 +-
 drivers/net/ethernet/broadcom/genet/bcmgenet.c     |   3 +-
 .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    |   9 +-
 .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c  |  12 ++-
 drivers/net/phy/bcm84881.c                         |   6 +-
 drivers/net/wimax/i2400m/usb-fw.c                  |   1 +
 drivers/platform/x86/gpd-pocket-fan.c              |   2 +-
 drivers/remoteproc/qcom_q6v5_mss.c                 |   2 +-
 drivers/scsi/sg.c                                  |   4 +-
 drivers/usb/dwc3/core.h                            |   4 +
 drivers/usb/dwc3/gadget.c                          |  52 ++++++++--
 drivers/vhost/vsock.c                              |   5 +
 fs/cifs/connect.c                                  |   6 ++
 include/drm/bridge/analogix_dp.h                   |   5 +-
 include/linux/ieee80211.h                          |   9 ++
 kernel/trace/ftrace.c                              |   1 +
 kernel/trace/trace_events_hist.c                   |   7 ++
 lib/mpi/longlong.h                                 |  34 +++---
 mm/mremap.c                                        |  10 ++
 net/core/netclassid_cgroup.c                       |   4 +-
 net/mac80211/mlme.c                                |   2 +-
 net/mac80211/rx.c                                  |   8 +-
 net/mac80211/sta_info.c                            |   3 +-
 net/mac80211/status.c                              |   5 +-
 net/mac80211/tx.c                                  |   2 +-
 net/sctp/sm_make_chunk.c                           |   6 +-
 net/sunrpc/cache.c                                 |   5 +-
 scripts/config                                     |   5 +-
 sound/pci/hda/hda_intel.c                          |   9 +-
 sound/soc/codecs/hdac_hdmi.c                       |   6 +-
 sound/soc/codecs/sgtl5000.c                        |  34 ++++++
 sound/soc/codecs/sgtl5000.h                        |   1 +
 sound/soc/sh/rcar/ssi.c                            |  11 +-
 sound/soc/sh/rcar/ssiu.c                           |   2 +-
 sound/soc/soc-topology.c                           | 115 ++++++++++++++++-----
 tools/bpf/runqslower/Makefile                      |   2 +-
 tools/testing/selftests/ipc/msgque.c               |   2 +-
 tools/testing/selftests/tpm2/test_smoke.sh         |  13 +--
 tools/testing/selftests/tpm2/test_space.sh         |   9 +-
 tools/testing/selftests/vm/Makefile                |   4 +-
 tools/testing/selftests/vm/run_vmtests             |   2 +-
 51 files changed, 402 insertions(+), 170 deletions(-)

From: Jia He <[email protected]>

commit 0b841030625cde5f784dd62aec72d6a766faae70 upstream.

Ning Bo reported an abnormal 2-second gap when booting Kata container [1]. The unconditional timeout was caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of connecting from the client side. The vhost vsock client tries to connect an initializing virtio vsock server.

The abnormal flow looks like:

host-userspace           vhost vsock                       guest vsock
==============           ===========                       ============
connect()     -------->  vhost_transport_send_pkt_work()   initializing
   |                     vq->private_data==NULL
   |                     will not be queued
   V
schedule_timeout(2s)
                         vhost_vsock_start()  <---------   device ready
                         set vq->private_data

wait for 2s and failed
connect() again vq->private_data!=NULL recv connecting pkt

Details:
1. Host userspace sends a connect pkt, at that time, guest vsock is under initializing, hence the vhost_vsock_start has not been called. So vq->private_data==NULL, and the pkt is not been queued to send to guest
2. Then it sleeps for 2s
3. After guest vsock finishes initializing, vq->private_data is set
4. When host userspace wakes up after 2s, send connecting pkt again, everything is fine.

As suggested by Stefano Garzarella, this fixes it by additional kicking the send_pkt worker in vhost_vsock_start once the virtio device is started. This makes the pending pkt sent again.

After this patch, kata-runtime (with vsock enabled) boot time is reduced from 3s to 1s on a ThunderX2 arm64 server.

[1] https://github.com/kata-containers/runtime/issues/1917

---
 drivers/vhost/vsock.c |    5 +++++
 1 file changed, 5 insertions(+)

@@ -543,6 +543,11 @@ static int vhost_vsock_start(struct vhos
 		mutex_unlock(&vq->mutex);
 	}
 
+	/* Some packets may have been queued before the device was started,
+	 * let's kick the send worker to send them.
+	 */
+	vhost_work_queue(&vsock->dev, &vsock->send_pkt_work);
+
 	mutex_unlock(&vsock->dev.mutex);
 	return 0;
 

From: Marek Szyprowski <[email protected]>

[ Upstream commit 83a196773b8bc6702f49df1eddc848180e350340 ]

Analogix_dp driver acquires all its resources in the ->bind() callback, what is a bit against the component driver based approach, where the driver initialization is split into a probe(), where all resources are gathered, and a bind(), where all objects are created and a compound driver is initialized.

Extract all the resource related operations to analogix_dp_probe() and analogix_dp_remove(), then call them before/after registration of the device components from the main Exynos DP and Rockchip DP drivers. Also move the plat_data initialization to the probe() to make it available for the analogix_dp_probe() function.

This fixes the multiple calls to the bind() of the DRM compound driver when the DP PHY driver is not yet loaded/probed:

[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm]) exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm]) exynos-dp 145b0000.dp-controller: no DP phy configured
exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517 exynos-drm exynos-drm: master bind failed: -517
...
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Console: switching to colour frame buffer device 170x48
exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
...

---
 .../drm/bridge/analogix/analogix_dp_core.c    | 33 +++++++++++------
 drivers/gpu/drm/exynos/exynos_dp.c            | 29 ++++++++-------
 .../gpu/drm/rockchip/analogix_dp-rockchip.c   | 36 ++++++++++---------
 include/drm/bridge/analogix_dp.h              |  5 +--
 4 files changed, 61 insertions(+), 42 deletions(-)

index 6effe532f8200..461eff94d2767 100644
@@ -1636,8 +1636,7 @@ static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux,
 }
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data)
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct analogix_dp_device *dp;

@@ -1740,22 +1739,30 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 					irq_flags, "analogix-dp", dp);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to request irq\n");
-		goto err_disable_pm_runtime;
+		return ERR_PTR(ret);
 	}
 	disable_irq(dp->irq);
 
+	return dp;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_probe);
+
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
+{
+	int ret;
+
 	dp->drm_dev = drm_dev;
 	dp->encoder = dp->plat_data->encoder;
 
 	dp->aux.name = "DP-AUX";
 	dp->aux.transfer = analogix_dpaux_transfer;
-	dp->aux.dev = &pdev->dev;
+	dp->aux.dev = dp->dev;
 
 	ret = drm_dp_aux_register(&dp->aux);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
-	pm_runtime_enable(dev);
+	pm_runtime_enable(dp->dev);
 
 	ret = analogix_dp_create_bridge(drm_dev, dp);
 	if (ret) {

@@ -1763,13 +1770,12 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 		goto err_disable_pm_runtime;
 	}
 
-	return dp;
+	return 0;
 
 err_disable_pm_runtime:
+	pm_runtime_disable(dp->dev);
 
-	pm_runtime_disable(dev);
-
-	return ERR_PTR(ret);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(analogix_dp_bind);
 

@@ -1786,10 +1792,15 @@ void analogix_dp_unbind(struct analogix_dp_device *dp)
 
 	drm_dp_aux_unregister(&dp->aux);
 	pm_runtime_disable(dp->dev);
-	clk_disable_unprepare(dp->clock);
 }
 EXPORT_SYMBOL_GPL(analogix_dp_unbind);
 
+void analogix_dp_remove(struct analogix_dp_device *dp)
+{
+	clk_disable_unprepare(dp->clock);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_remove);
+
 #ifdef CONFIG_PM
 int analogix_dp_suspend(struct analogix_dp_device *dp)
 {

index 4785885c0f4f9..065a1cb2a5444 100644
@@ -158,15 +158,8 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp->dev = dev;
 	dp->drm_dev = drm_dev;
 
-	dp->plat_data.dev_type = EXYNOS_DP;
-	dp->plat_data.power_on_start = exynos_dp_poweron;
-	dp->plat_data.power_off = exynos_dp_poweroff;
-	dp->plat_data.attach = exynos_dp_bridge_attach;
-	dp->plat_data.get_modes = exynos_dp_get_modes;
-
 	if (!dp->plat_data.panel && !dp->ptn_bridge) {
 		ret = exynos_dp_dt_parse_panel(dp);
 		if (ret)

@@ -184,13 +177,11 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 
 	dp->plat_data.encoder = encoder;
 
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
+	ret = analogix_dp_bind(dp->adp, dp->drm_dev);
+	if (ret)
 		dp->encoder.funcs->destroy(&dp->encoder);
-		return PTR_ERR(dp->adp);
-	}
 
-	return 0;
+	return ret;
 }
 
 static void exynos_dp_unbind(struct device *dev, struct device *master,

@@ -221,6 +212,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	if (!dp)
 		return -ENOMEM;
 
+	dp->dev = dev;
 	/*
 	 * We just use the drvdata until driver run into component
 	 * add function, and then we would set drvdata to null, so

@@ -246,16 +238,29 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	/* The remote port can be either a panel or a bridge */
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = EXYNOS_DP;
+	dp->plat_data.power_on_start = exynos_dp_poweron;
+	dp->plat_data.power_off = exynos_dp_poweroff;
+	dp->plat_data.attach = exynos_dp_bridge_attach;
+	dp->plat_data.get_modes = exynos_dp_get_modes;
 	dp->plat_data.skip_connector = !!bridge;
+
 	dp->ptn_bridge = bridge;
 
 out:
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(&pdev->dev, &exynos_dp_ops);
 }
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
+	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &exynos_dp_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }

index f38f5e113c6b3..ce98c08aa8b44 100644
@@ -325,15 +325,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 			    void *data)
 {
 	struct rockchip_dp_device *dp = dev_get_drvdata(dev);
-	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp_data = of_device_get_match_data(dev);
-	if (!dp_data)
-		return -ENODEV;
-
-	dp->data = dp_data;
 	dp->drm_dev = drm_dev;
 
 	ret = rockchip_dp_drm_create_encoder(dp);

@@ -344,16 +338,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 
 	dp->plat_data.encoder = &dp->encoder;
 
-	dp->plat_data.dev_type = dp->data->chip_type;
-	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
-	dp->plat_data.power_off = rockchip_dp_powerdown;
-	dp->plat_data.get_modes = rockchip_dp_get_modes;
-
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
-		ret = PTR_ERR(dp->adp);
+	ret = analogix_dp_bind(dp->adp, drm_dev);
+	if (ret)
 		goto err_cleanup_encoder;
-	}
 
 	return 0;
 err_cleanup_encoder:

@@ -368,8 +355,6 @@ static void rockchip_dp_unbind(struct device *dev, struct device *master,
 
 	analogix_dp_unbind(dp->adp);
 	dp->encoder.funcs->destroy(&dp->encoder);
-
-	dp->adp = ERR_PTR(-ENODEV);
 }
 
 static const struct component_ops rockchip_dp_component_ops = {

@@ -380,10 +365,15 @@ static const struct component_ops rockchip_dp_component_ops = {
 static int rockchip_dp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_panel *panel = NULL;
 	struct rockchip_dp_device *dp;
 	int ret;
 
+	dp_data = of_device_get_match_data(dev);
+	if (!dp_data)
+		return -ENODEV;
+
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
 	if (ret < 0)
 		return ret;

@@ -394,7 +384,12 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	dp->dev = dev;
 	dp->adp = ERR_PTR(-ENODEV);
+	dp->data = dp_data;
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = dp->data->chip_type;
+	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
+	dp->plat_data.power_off = rockchip_dp_powerdown;
+	dp->plat_data.get_modes = rockchip_dp_get_modes;
 
 	ret = rockchip_dp_of_probe(dp);
 	if (ret < 0)

@@ -402,12 +397,19 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dp);
 
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(dev, &rockchip_dp_component_ops);
 }
 
 static int rockchip_dp_remove(struct platform_device *pdev)
 {
+	struct rockchip_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &rockchip_dp_component_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }

index 7aa2f93da49ca..b0dcc07334a1e 100644
@@ -42,9 +42,10 @@ int analogix_dp_resume(struct analogix_dp_device *dp);
 int analogix_dp_suspend(struct analogix_dp_device *dp);
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data);
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data);
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev);
 void analogix_dp_unbind(struct analogix_dp_device *dp);
+void analogix_dp_remove(struct analogix_dp_device *dp);
 
 int analogix_dp_start_crc(struct drm_connector *connector);
 int analogix_dp_stop_crc(struct drm_connector *connector);

2.20.1

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit abc3caac24501008465fdb55c5e89e16d58d5a3d ]

kstrdup is an allocation function and it can fail, so its return value should be checked and handled appropriately.

In order to check all cases, we need to modify set_stream_info to return a value, so check that everything went correctly when doing kstrdup(). Later add proper checks and error handlers.

---
 sound/soc/soc-topology.c | 62 +++++++++++++++++++++++++++++++---------
 1 file changed, 49 insertions(+), 13 deletions(-)

index a152409e8746e..7a7c427de95d6 100644
@@ -1766,10 +1766,13 @@ static int soc_tplg_dapm_complete(struct soc_tplg *tplg)
 	return 0;
 }
 
-static void set_stream_info(struct snd_soc_pcm_stream *stream,
+static int set_stream_info(struct snd_soc_pcm_stream *stream,
 	struct snd_soc_tplg_stream_caps *caps)
 {
 	stream->stream_name = kstrdup(caps->name, GFP_KERNEL);
+	if (!stream->stream_name)
+		return -ENOMEM;
+
 	stream->channels_min = le32_to_cpu(caps->channels_min);
 	stream->channels_max = le32_to_cpu(caps->channels_max);
 	stream->rates = le32_to_cpu(caps->rates);

@@ -1777,6 +1780,8 @@ static void set_stream_info(struct snd_soc_pcm_stream *stream,
 	stream->rate_max = le32_to_cpu(caps->rate_max);
 	stream->formats = le64_to_cpu(caps->formats);
 	stream->sig_bits = le32_to_cpu(caps->sig_bits);
+
+	return 0;
 }
 
 static void set_dai_flags(struct snd_soc_dai_driver *dai_drv,

@@ -1812,20 +1817,29 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg,
 	if (dai_drv == NULL)
 		return -ENOMEM;
 
-	if (strlen(pcm->dai_name))
+	if (strlen(pcm->dai_name)) {
 		dai_drv->name = kstrdup(pcm->dai_name, GFP_KERNEL);
+		if (!dai_drv->name) {
+			ret = -ENOMEM;
+			goto err;
+		}
+	}
 	dai_drv->id = le32_to_cpu(pcm->dai_id);
 
 	if (pcm->playback) {
 		stream = &dai_drv->playback;
 		caps = &pcm->caps[SND_SOC_TPLG_STREAM_PLAYBACK];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (pcm->capture) {
 		stream = &dai_drv->capture;
 		caps = &pcm->caps[SND_SOC_TPLG_STREAM_CAPTURE];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (pcm->compress)

@@ -1835,11 +1849,7 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg,
 	ret = soc_tplg_dai_load(tplg, dai_drv, pcm, NULL);
 	if (ret < 0) {
 		dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n");
-		kfree(dai_drv->playback.stream_name);
-		kfree(dai_drv->capture.stream_name);
-		kfree(dai_drv->name);
-		kfree(dai_drv);
-		return ret;
+		goto err;
 	}
 
 	dai_drv->dobj.index = tplg->index;

@@ -1860,6 +1870,14 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg,
 		return ret;
 	}
 
+	return 0;
+
+err:
+	kfree(dai_drv->playback.stream_name);
+	kfree(dai_drv->capture.stream_name);
+	kfree(dai_drv->name);
+	kfree(dai_drv);
+
 	return ret;
 }
 

@@ -1916,11 +1934,20 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg,
 	if (strlen(pcm->pcm_name)) {
 		link->name = kstrdup(pcm->pcm_name, GFP_KERNEL);
 		link->stream_name = kstrdup(pcm->pcm_name, GFP_KERNEL);
+		if (!link->name || !link->stream_name) {
+			ret = -ENOMEM;
+			goto err;
+		}
 	}
 	link->id = le32_to_cpu(pcm->pcm_id);
 
-	if (strlen(pcm->dai_name))
+	if (strlen(pcm->dai_name)) {
 		link->cpus->dai_name = kstrdup(pcm->dai_name, GFP_KERNEL);
+		if (!link->cpus->dai_name) {
+			ret = -ENOMEM;
+			goto err;
+		}
+	}
 
 	link->codecs->name = "snd-soc-dummy";
 	link->codecs->dai_name = "snd-soc-dummy-dai";

@@ -2436,13 +2463,17 @@ static int soc_tplg_dai_config(struct soc_tplg *tplg,
 	if (d->playback) {
 		stream = &dai_drv->playback;
 		caps = &d->caps[SND_SOC_TPLG_STREAM_PLAYBACK];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (d->capture) {
 		stream = &dai_drv->capture;
 		caps = &d->caps[SND_SOC_TPLG_STREAM_CAPTURE];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (d->flag_mask)

@@ -2454,10 +2485,15 @@ static int soc_tplg_dai_config(struct soc_tplg *tplg,
 	ret = soc_tplg_dai_load(tplg, dai_drv, NULL, dai);
 	if (ret < 0) {
 		dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n");
-		return ret;
+		goto err;
 	}
 
 	return 0;
+
+err:
+	kfree(dai_drv->playback.stream_name);
+	kfree(dai_drv->capture.stream_name);
+	return ret;
 }
 
 /* load physical DAI elements */

2.20.1

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit 482db55ae87f3749db05810a38b1d618dfd4407c ]

Function soc_tplg_create_tlv can fail, so we should check if it succeded or not and proceed appropriately.

---
 sound/soc/soc-topology.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

index 7a7c427de95d6..5d974a36cdc92 100644
@@ -894,7 +894,13 @@ static int soc_tplg_dmixer_create(struct soc_tplg *tplg, unsigned int count,
 		}
 
 		/* create any TLV data */
-		soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+		err = soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+		if (err < 0) {
+			dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+				mc->hdr.name);
+			kfree(sm);
+			continue;
+		}
 
 		/* pass control to driver for optional further init */
 		err = soc_tplg_init_kcontrol(tplg, &kc,

@@ -1355,7 +1361,13 @@ static struct snd_kcontrol_new *soc_tplg_dapm_widget_dmixer_create(
 		}
 
 		/* create any TLV data */
-		soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+		err = soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+		if (err < 0) {
+			dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+				mc->hdr.name);
+			kfree(sm);
+			continue;
+		}
 
 		/* pass control to driver for optional further init */
 		err = soc_tplg_init_kcontrol(tplg, &kc[i],

2.20.1

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit 2ae548f30d7f6973388fc3769bb3c2f6fd13652b ]

Functions soc_tplg_denum_create, soc_tplg_dmixer_create, soc_tplg_dbytes_create can fail, so their return values should be checked and error should be propagated.

---
 sound/soc/soc-topology.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

index 5d974a36cdc92..c86c3ea533f68 100644
@@ -1124,6 +1124,7 @@ static int soc_tplg_kcontrol_elems_load(struct soc_tplg *tplg,
 	struct snd_soc_tplg_hdr *hdr)
 {
 	struct snd_soc_tplg_ctl_hdr *control_hdr;
+	int ret;
 	int i;
 
 	if (tplg->pass != SOC_TPLG_PASS_MIXER) {

@@ -1152,25 +1153,30 @@ static int soc_tplg_kcontrol_elems_load(struct soc_tplg *tplg,
 		case SND_SOC_TPLG_CTL_RANGE:
 		case SND_SOC_TPLG_DAPM_CTL_VOLSW:
 		case SND_SOC_TPLG_DAPM_CTL_PIN:
-			soc_tplg_dmixer_create(tplg, 1,
-					       le32_to_cpu(hdr->payload_size));
+			ret = soc_tplg_dmixer_create(tplg, 1,
+					le32_to_cpu(hdr->payload_size));
 			break;
 		case SND_SOC_TPLG_CTL_ENUM:
 		case SND_SOC_TPLG_CTL_ENUM_VALUE:
 		case SND_SOC_TPLG_DAPM_CTL_ENUM_DOUBLE:
 		case SND_SOC_TPLG_DAPM_CTL_ENUM_VIRT:
 		case SND_SOC_TPLG_DAPM_CTL_ENUM_VALUE:
-			soc_tplg_denum_create(tplg, 1,
-					      le32_to_cpu(hdr->payload_size));
+			ret = soc_tplg_denum_create(tplg, 1,
+					le32_to_cpu(hdr->payload_size));
 			break;
 		case SND_SOC_TPLG_CTL_BYTES:
-			soc_tplg_dbytes_create(tplg, 1,
-					       le32_to_cpu(hdr->payload_size));
+			ret = soc_tplg_dbytes_create(tplg, 1,
+					le32_to_cpu(hdr->payload_size));
 			break;
 		default:
 			soc_bind_err(tplg, control_hdr, i);
 			return -EINVAL;
 		}
+		if (ret < 0) {
+			dev_err(tplg->dev, "ASoC: invalid control\n");
+			return ret;
+		}
+
 	}
 
 	return 0;

2.20.1

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit 6856e887eae3efc0fe56899cb3f969fe063171c5 ]

Function soc_tplg_add_route can propagate error code from callback, we should check its return value and handle fail in correct way.

---
 sound/soc/soc-topology.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index c86c3ea533f68..aa7714f2b78fd 100644
@@ -1284,7 +1284,9 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg,
 		routes[i]->dobj.index = tplg->index;
 		list_add(&routes[i]->dobj.list, &tplg->comp->dobj_list);
 
-		soc_tplg_add_route(tplg, routes[i]);
+		ret = soc_tplg_add_route(tplg, routes[i]);
+		if (ret < 0)
+			break;
 
 		/* add route, but keep going if some fail */
 		snd_soc_dapm_add_routes(dapm, routes[i], 1);

2.20.1

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit b3677fc3d68dd942c92de52f0bd9dd8b472a40e6 ]

Function pcm_new_ver can fail, so we should check it's return value and handle possible error.

---
 sound/soc/soc-topology.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index aa7714f2b78fd..ca0ac5372b293 100644
@@ -2135,7 +2135,9 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 			_pcm = pcm;
 		} else {
 			abi_match = false;
-			pcm_new_ver(tplg, pcm, &_pcm);
+			ret = pcm_new_ver(tplg, pcm, &_pcm);
+			if (ret < 0)
+				return ret;
 		}
 
 		/* create the FE DAIs and DAI links */

2.20.1

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit dd8e871d4e560eeb8d22af82dde91457ad835a63 ]

Function soc_tplg_dai_config can fail, check for and handle possible failure.

---
 sound/soc/soc-topology.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

index ca0ac5372b293..e6a17ab433eea 100644
@@ -2524,7 +2524,7 @@ static int soc_tplg_dai_elems_load(struct soc_tplg *tplg,
 {
 	struct snd_soc_tplg_dai *dai;
 	int count;
-	int i;
+	int i, ret;
 
 	count = le32_to_cpu(hdr->count);
 

@@ -2539,7 +2539,12 @@ static int soc_tplg_dai_elems_load(struct soc_tplg *tplg,
 			return -EINVAL;
 		}
 
-		soc_tplg_dai_config(tplg, dai);
+		ret = soc_tplg_dai_config(tplg, dai);
+		if (ret < 0) {
+			dev_err(tplg->dev, "ASoC: failed to configure DAI\n");
+			return ret;
+		}
+
 		tplg->pos += (sizeof(*dai) + le32_to_cpu(dai->priv.size));
 	}
 

2.20.1

From: Yihao Wu <[email protected]>

[ Upstream commit 43e33924c38e8faeb0c12035481cb150e602e39d ]

Deleting list entry within hlist_for_each_entry_safe is not safe unless next pointer (tmp) is protected too. It's not, because once hash_lock is released, cache_clean may delete the entry that tmp points to. Then cache_purge can walk to a deleted entry and tries to double free it.

Fix this bug by holding only the deleted entry's reference.

---
 net/sunrpc/cache.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

index bd843a81afa0b..d36cea4e270de 100644
@@ -521,7 +521,6 @@ void cache_purge(struct cache_detail *detail)
 {
 	struct cache_head *ch = NULL;
 	struct hlist_head *head = NULL;
-	struct hlist_node *tmp = NULL;
 	int i = 0;
 
 	spin_lock(&detail->hash_lock);

@@ -533,7 +532,9 @@ void cache_purge(struct cache_detail *detail)
 	dprintk("RPC: %d entries in %s cache\n", detail->entries, detail->name);
 	for (i = 0; i < detail->hash_size; i++) {
 		head = &detail->hash_table[i];
-		hlist_for_each_entry_safe(ch, tmp, head, cache_list) {
+		while (!hlist_empty(head)) {
+			ch = hlist_entry(head->first, struct cache_head,
+					 cache_list);
 			sunrpc_begin_cache_remove_entry(ch, detail);
 			spin_unlock(&detail->hash_lock);
 			sunrpc_end_cache_remove_entry(ch, detail);

2.20.1

From: Sandipan Das <[email protected]>

[ Upstream commit 24c3f063c57b2a8ae21b259bcfa7690e2eb56dd9 ]

Independent builds of the vm selftests is currently broken because commit 7549b3364201 ("selftests: vm: Build/Run 64bit tests only on 64bit arch") overrides the value of ARCH with the machine name from uname. This does not always match the architecture names used for tasks like header installation.

E.g. for building tests on powerpc64, we need ARCH=powerpc and not ARCH=ppc64 or ARCH=ppc64le. Otherwise, the build fails as shown below.

  $ uname -m
  ppc64le

  $ make -C tools/testing/selftests/vm
  make: Entering directory '/home/sandipan/linux/tools/testing/selftests/vm'
  make --no-builtin-rules ARCH=ppc64le -C ../../../.. headers_install
  make[1]: Entering directory '/home/sandipan/linux'
  Makefile:653: arch/ppc64le/Makefile: No such file or directory
  make[1]: *** No rule to make target 'arch/ppc64le/Makefile'.  Stop.
  make[1]: Leaving directory '/home/sandipan/linux'
  ../lib.mk:50: recipe for target 'khdr' failed
  make: *** [khdr] Error 2
  make: Leaving directory '/home/sandipan/linux/tools/testing/selftests/vm'

---
 tools/testing/selftests/vm/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 7f9a8a8c31da9..3f2e2f0ccbc9a 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for vm selftests
 uname_M := $(shell uname -m 2>/dev/null || echo not)
-ARCH ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/')
+MACHINE ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/')
 
 CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
 LDLIBS = -lrt

@@ -19,7 +19,7 @@ TEST_GEN_FILES += thuge-gen
 TEST_GEN_FILES += transhuge-stress
 TEST_GEN_FILES += userfaultfd
 
-ifneq (,$(filter $(ARCH),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64))
+ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64))
 TEST_GEN_FILES += va_128TBswitch
 TEST_GEN_FILES += virtual_address_range
 endif

2.20.1

From: Sandipan Das <[email protected]>

[ Upstream commit 963e3e9c9a127013eb4d3c82eb997068b1adbb89 ]

Some tests are built only for 64-bit systems. This makes sure that these tests are built for both big and little endian variants of powerpc64.

---
 tools/testing/selftests/vm/Makefile    | 2 +-
 tools/testing/selftests/vm/run_vmtests | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

index 3f2e2f0ccbc9a..8074340c6b3ab 100644
@@ -19,7 +19,7 @@ TEST_GEN_FILES += thuge-gen
 TEST_GEN_FILES += transhuge-stress
 TEST_GEN_FILES += userfaultfd
 
-ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64))
+ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64))
 TEST_GEN_FILES += va_128TBswitch
 TEST_GEN_FILES += virtual_address_range
 endif

index f337148431980..6e137c9baa1e0 100755
@@ -59,7 +59,7 @@ else
 fi
 
 #filter 64bit architectures
-ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64"
+ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64"
 if [ -z $ARCH ]; then
   ARCH=`uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/'`
 fi

2.20.1

From: Jarkko Sakkinen <[email protected]>

[ Upstream commit aaa2d92efe1f972567f1691b423ab8dc606ab3a9 ]

This reverts commit b32694cd0724d4ceca2c62cc7c3d3a8d1ffa11fc.

The original comment was neither reviewed nor tested. Thus, this the *only* possible action to take.

---
 tools/testing/selftests/tpm2/test_smoke.sh | 13 ++-----------
 tools/testing/selftests/tpm2/test_space.sh |  9 +--------
 2 files changed, 3 insertions(+), 19 deletions(-)

index b630c7b5950a9..8155c2ea7ccbb 100755
@@ -1,17 +1,8 @@
 #!/bin/bash
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
-self.flags = flags
 
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
-
-if [ -f /dev/tpm0 ] ; then
-	python -m unittest -v tpm2_tests.SmokeTest
-	python -m unittest -v tpm2_tests.AsyncTest
-else
-	exit $ksft_skip
-fi
+python -m unittest -v tpm2_tests.SmokeTest
+python -m unittest -v tpm2_tests.AsyncTest
 
 CLEAR_CMD=$(which tpm2_clear)
 if [ -n $CLEAR_CMD ]; then

index 180b469c53b47..a6f5e346635e5 100755
@@ -1,11 +1,4 @@
 #!/bin/bash
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
-if [ -f /dev/tpmrm0 ] ; then
-	python -m unittest -v tpm2_tests.SpaceTest
-else
-	exit $ksft_skip
-fi
+python -m unittest -v tpm2_tests.SpaceTest

2.20.1

From: Tyler Hicks <[email protected]>

[ Upstream commit b87080eab4c1377706c113fc9c0157f19ea8fed1 ]

After successfully running the IPC msgque test once, subsequent runs result in a test failure:

  $ sudo ./run_kselftest.sh
  TAP version 13
  1..1
  # selftests: ipc: msgque
  # Failed to get stats for IPC queue with id 0
  # Failed to dump queue: -22
  # Bail out!
  # # Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
  not ok 1 selftests: ipc: msgque # exit=1

The dump_queue() function loops through the possible message queue index values using calls to msgctl(kern_id, MSG_STAT, ...) where kern_id represents the index value. The first time the test is ran, the initial index value of 0 is valid and the test is able to complete. The index value of 0 is not valid in subsequent test runs and the loop attempts to try index values of 1, 2, 3, and so on until a valid index value is found that corresponds to the message queue created earlier in the test.

The msgctl() syscall returns -1 and sets errno to EINVAL when invalid index values are used. The test failure is caused by incorrectly comparing errno to -EINVAL when cycling through possible index values.

Fix invalid test failures on subsequent runs of the msgque test by correctly comparing errno values to a non-negated EINVAL.

---
 tools/testing/selftests/ipc/msgque.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 4c156aeab6b80..5ec4d9e18806c 100644
@@ -137,7 +137,7 @@ int dump_queue(struct msgque_data *msgque)
 	for (kern_id = 0; kern_id < 256; kern_id++) {
 		ret = msgctl(kern_id, MSG_STAT, &ds);
 		if (ret < 0) {
-			if (errno == -EINVAL)
+			if (errno == EINVAL)
 				continue;
 			printf("Failed to get stats for IPC queue with id %d\n",
 					kern_id);

2.20.1

From: Vasily Khoruzhick <[email protected]>

[ Upstream commit 1e8a6ce9186dbf342eebc07cf14cae5e82164e03 ]

Some drivers (e.g. sun4i-drm) need this info to decide whether they need to enable dithering. Currently driver reports what panel supports and if panel supports 8 we don't get dithering enabled.

Hardcode BPC to 6 for now since that's the only BPC that driver supports.

---
 drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 3 +++
 1 file changed, 3 insertions(+)

index 526507102c1ea..8d32fea84c75e 100644
@@ -485,6 +485,9 @@ static int anx6345_get_modes(struct drm_connector *connector)
 
 	num_modes += drm_add_edid_modes(connector, anx6345->edid);
 
+	/* Driver currently supports only 6bpc */
+	connector->display_info.bpc = 6;
+
 unlock:
 	if (power_off)
 		anx6345_poweroff(anx6345);

2.20.1

From: Wu Bo <[email protected]>

[ Upstream commit 83c6f2390040f188cc25b270b4befeb5628c1aee ]

If the __copy_from_user function failed we need to call sg_remove_request in sg_write.

---
 drivers/scsi/sg.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 9c0ee192f0f9c..20472aaaf630a 100644
@@ -685,8 +685,10 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
 	hp->flags = input_size;	/* structure abuse ... */
 	hp->pack_id = old_hdr.pack_id;
 	hp->usr_ptr = NULL;
-	if (copy_from_user(cmnd, buf, cmd_size))
+	if (copy_from_user(cmnd, buf, cmd_size)) {
+		sg_remove_request(sfp, srp);
 		return -EFAULT;
+	}
 	/*
 	 * SG_DXFER_TO_FROM_DEV is functionally equivalent to SG_DXFER_FROM_DEV,
 	 * but is is possible that the app intended SG_DXFER_TO_DEV, because there

2.20.1

From: Sebastian Reichel <[email protected]>

[ Upstream commit aa7812737f2877e192d57626cbe8825cc7cf6de9 ]

As mentioned slightly out of patch context in the code, there is no reset routine for the chip. On boards where the chip is supplied by a fixed regulator, it might not even be resetted during (e.g. watchdog) reboot and can be in any state.

If the device is probed with VAG enabled, the driver's probe routine will generate a loud pop sound when ANA_POWER is being programmed. Avoid this by properly disabling just the VAG bit and waiting the required power down time.

---
 sound/soc/codecs/sgtl5000.c | 34 ++++++++++++++++++++++++++++++++++
 sound/soc/codecs/sgtl5000.h |  1 +
 2 files changed, 35 insertions(+)

index d5130193b4a2f..e8a8bf7b4ffed 100644
@@ -1653,6 +1653,40 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
 		dev_err(&client->dev,
 			"Error %d initializing CHIP_CLK_CTRL\n", ret);
 
+	/* Mute everything to avoid pop from the following power-up */
+	ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_CTRL,
+			   SGTL5000_CHIP_ANA_CTRL_DEFAULT);
+	if (ret) {
+		dev_err(&client->dev,
+			"Error %d muting outputs via CHIP_ANA_CTRL\n", ret);
+		goto disable_clk;
+	}
+
+	/*
+	 * If VAG is powered-on (e.g. from previous boot), it would be disabled
+	 * by the write to ANA_POWER in later steps of the probe code. This
+	 * may create a loud pop even with all outputs muted. The proper way
+	 * to circumvent this is disabling the bit first and waiting the proper
+	 * cool-down time.
+	 */
+	ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, &value);
+	if (ret) {
+		dev_err(&client->dev, "Failed to read ANA_POWER: %d\n", ret);
+		goto disable_clk;
+	}
+	if (value & SGTL5000_VAG_POWERUP) {
+		ret = regmap_update_bits(sgtl5000->regmap,
+					 SGTL5000_CHIP_ANA_POWER,
+					 SGTL5000_VAG_POWERUP,
+					 0);
+		if (ret) {
+			dev_err(&client->dev, "Error %d disabling VAG\n", ret);
+			goto disable_clk;
+		}
+
+		msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+	}
+
 	/* Follow section 2.2.1.1 of AN3663 */
 	ana_pwr = SGTL5000_ANA_POWER_DEFAULT;
 	if (sgtl5000->num_supplies <= VDDD) {

index a4bf4bca95bf7..56ec5863f2507 100644
@@ -233,6 +233,7 @@
 /*
  * SGTL5000_CHIP_ANA_CTRL
  */
+#define SGTL5000_CHIP_ANA_CTRL_DEFAULT		0x0133
 #define SGTL5000_LINE_OUT_MUTE			0x0100
 #define SGTL5000_HP_SEL_MASK			0x0040
 #define SGTL5000_HP_SEL_SHIFT			6

2.20.1

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit 26d87881590fd55ccdd8f829498d7b3033f81990 ]

As done in already existing cases, we should use le32_to_cpu macro while accessing hdr->magic. Found with sparse.

---
 sound/soc/soc-topology.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index e6a17ab433eea..009d65a6fb43a 100644
@@ -2652,7 +2652,7 @@ static int soc_valid_header(struct soc_tplg *tplg,
 	}
 
 	/* big endian firmware objects not supported atm */
-	if (hdr->magic == SOC_TPLG_MAGIC_BIG_ENDIAN) {
+	if (le32_to_cpu(hdr->magic) == SOC_TPLG_MAGIC_BIG_ENDIAN) {
 		dev_err(tplg->dev,
 			"ASoC: pass %d big endian not supported header got %x at offset 0x%lx size 0x%zx.\n",
 			tplg->pass, hdr->magic,

2.20.1

From: Thinh Nguyen <[email protected]>

[ Upstream commit d94ea5319813658ad5861d161ae16a194c2abf88 ]

Currently the calculation of max packet size limit for IN endpoints is too restrictive. This prevents a matching of a capable hardware endpoint during configuration. Below is the minimum recommended HW configuration to support a particular endpoint setup from the databook:

For OUT endpoints, the databook recommended the minimum RxFIFO size to be at least 3x MaxPacketSize + 3x setup packets size (8 bytes each) + clock crossing margin (16 bytes).

For IN endpoints, the databook recommended the minimum TxFIFO size to be at least 3x MaxPacketSize for endpoints that support burst. If the endpoint doesn't support burst or when the device is operating in USB 2.0 mode, a minimum TxFIFO size of 2x MaxPacketSize is recommended.

Base on these recommendations, we can calculate the MaxPacketSize limit of each endpoint. This patch revises the IN endpoint MaxPacketSize limit and also sets the MaxPacketSize limit for OUT endpoints.

Reference: Databook 3.30a section 3.2.2 and 3.2.3

---
 drivers/usb/dwc3/core.h   |  4 +++
 drivers/usb/dwc3/gadget.c | 52 ++++++++++++++++++++++++++++++---------
 2 files changed, 45 insertions(+), 11 deletions(-)

index 3ecc69c5b150f..ce4acbf7fef90 100644
@@ -310,6 +310,10 @@
 #define DWC3_GTXFIFOSIZ_TXFDEF(n)	((n) & 0xffff)
 #define DWC3_GTXFIFOSIZ_TXFSTADDR(n)	((n) & 0xffff0000)
 
+/* Global RX Fifo Size Register */
+#define DWC31_GRXFIFOSIZ_RXFDEP(n)	((n) & 0x7fff)	/* DWC_usb31 only */
+#define DWC3_GRXFIFOSIZ_RXFDEP(n)	((n) & 0xffff)
+
 /* Global Event Size Registers */
 #define DWC3_GEVNTSIZ_INTMASK		BIT(31)
 #define DWC3_GEVNTSIZ_SIZE(n)		((n) & 0xffff)

2.20.1

From: Matthias Blankertz <[email protected]>

[ Upstream commit a09fb3f28a60ba3e928a1fa94b0456780800299d ]

The parent SSI of a multi-SSI setup must be fully setup, started and stopped since it is also part of the playback/capture setup. So only skip the SSI (as per commit 203cdf51f288 ("ASoC: rsnd: SSI parent cares SWSP bit") and commit 597b046f0d99 ("ASoC: rsnd: control SSICR::EN correctly")) if the SSI is parent outside of a multi-SSI setup.

---
 sound/soc/sh/rcar/ssi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

index fc5d089868dfc..d51fb3a394486 100644
@@ -407,7 +407,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod,
 	 * We shouldn't exchange SWSP after running.
 	 * This means, parent needs to care it.
 	 */
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		goto init_end;
 
 	if (rsnd_io_is_play(io))

@@ -559,7 +559,7 @@ static int rsnd_ssi_start(struct rsnd_mod *mod,
 	 * EN is for data output.
 	 * SSI parent EN is not needed.
 	 */
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		return 0;
 
 	ssi->cr_en = EN;

@@ -582,7 +582,7 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
 	if (!rsnd_ssi_is_run_mods(mod, io))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		return 0;
 
 	cr  =	ssi->cr_own	|

@@ -620,7 +620,7 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod,
 	if (rsnd_is_gen1(priv))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		return 0;
 
 	if (!rsnd_ssi_is_run_mods(mod, io))

2.20.1

From: Matthias Blankertz <[email protected]>

[ Upstream commit b94e164759b82d0c1c80d4b1c8f12c9bee83f11d ]

The HDMI?_SEL register maps up to four stereo SSI data lanes onto the sdata[0..3] inputs of the HDMI output block. The upper half of the register contains four blocks of 4 bits, with the most significant controlling the sdata3 line and the least significant the sdata0 line.

The shift calculation has an off-by-one error, causing the parent SSI to be mapped to sdata3, the first multi-SSI child to sdata0 and so forth. As the parent SSI transmits the stereo L/R channels, and the HDMI core expects it on the sdata0 line, this causes no audio to be output when playing stereo audio on a multichannel capable HDMI out, and multichannel audio has permutated channels.

Fix the shift calculation to map the parent SSI to sdata0, the first child to sdata1 etc.

---
 sound/soc/sh/rcar/ssiu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index f35d882118874..9c7c3e7539c93 100644
@@ -221,7 +221,7 @@ static int rsnd_ssiu_init_gen2(struct rsnd_mod *mod,
 			i;
 
 		for_each_rsnd_mod_array(i, pos, io, rsnd_ssi_array) {
-			shift	= (i * 4) + 16;
+			shift	= (i * 4) + 20;
 			val	= (val & ~(0xF << shift)) |
 				rsnd_mod_id(pos) << shift;
 		}

2.20.1

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit 326b509238171d37402dbe308e154cc234ed1960 ]

If we don't find any pcm, pcm will point at address at an offset from the the list head and not a meaningful structure. Fix this by returning correct pcm if found and NULL if not. Found with coccinelle.

---
 sound/soc/codecs/hdac_hdmi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index e6558475e006d..f0f689ddbefe8 100644
@@ -142,14 +142,14 @@ static struct hdac_hdmi_pcm *
 hdac_hdmi_get_pcm_from_cvt(struct hdac_hdmi_priv *hdmi,
 			   struct hdac_hdmi_cvt *cvt)
 {
-	struct hdac_hdmi_pcm *pcm = NULL;
+	struct hdac_hdmi_pcm *pcm;
 
 	list_for_each_entry(pcm, &hdmi->pcm_list, head) {
 		if (pcm->cvt == cvt)
-			break;
+			return pcm;
 	}
 
-	return pcm;
+	return NULL;
 }
 
 static void hdac_hdmi_jack_report(struct hdac_hdmi_pcm *pcm,

2.20.1

From: Alex Elder <[email protected]>

[ Upstream commit 13c060b50a341dd60303e5264d12108b5747f200 ]

If looking up the DT "firmware-name" property fails in q6v6_probe(), the function returns without freeing the remoteproc structure that has been allocated. Fix this by jumping to the free_rproc label, which takes care of this.

---
 drivers/remoteproc/qcom_q6v5_mss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 0b1d737b0e97d..8844fc56c5f6d 100644
@@ -1607,7 +1607,7 @@ static int q6v5_probe(struct platform_device *pdev)
 	ret = of_property_read_string_index(pdev->dev.of_node, "firmware-name",
 					    1, &qproc->hexagon_mdt_image);
 	if (ret < 0 && ret != -EINVAL)
-		return ret;
+		goto free_rproc;
 
 	platform_set_drvdata(pdev, qproc);
 

2.20.1

From: Prike Liang <[email protected]>

[ Upstream commit 45a5e639548c459a5accebad340078e4e6e0e512 ]

When the amdgpu in the suspend/resume loop need notify the dpm disabled, otherwise the smu table will be uninitialize and result in resume failed.

---
 drivers/gpu/drm/amd/powerplay/renoir_ppt.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

index f7a1ce37227cd..4a52c310058d1 100644
@@ -889,12 +889,17 @@ static int renoir_read_sensor(struct smu_context *smu,
 
 static bool renoir_is_dpm_running(struct smu_context *smu)
 {
+	struct amdgpu_device *adev = smu->adev;
+
 	/*
 	 * Util now, the pmfw hasn't exported the interface of SMU
 	 * feature mask to APU SKU so just force on all the feature
 	 * at early initial stage.
 	 */
-	return true;
+	if (adev->in_suspend)
+		return false;
+	else
+		return true;
 
 }
 

2.20.1

From: Sandeep Raghuraman <[email protected]>

[ Upstream commit bbc25dadc7ed19f9d6b2e30980f0eb4c741bb8bf ]

Initialize thermal controller fields in the PowerPlay table for Hawaii GPUs, so that fan speeds are reported.

---
 .../drm/amd/powerplay/hwmgr/processpptables.c | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

index 77c14671866c0..719597c5d27d9 100644
@@ -984,6 +984,32 @@ static int init_thermal_controller(
 			struct pp_hwmgr *hwmgr,
 			const ATOM_PPLIB_POWERPLAYTABLE *powerplay_table)
 {
+	hwmgr->thermal_controller.ucType =
+			powerplay_table->sThermalController.ucType;
+	hwmgr->thermal_controller.ucI2cLine =
+			powerplay_table->sThermalController.ucI2cLine;
+	hwmgr->thermal_controller.ucI2cAddress =
+			powerplay_table->sThermalController.ucI2cAddress;
+
+	hwmgr->thermal_controller.fanInfo.bNoFan =
+		(0 != (powerplay_table->sThermalController.ucFanParameters &
+			ATOM_PP_FANPARAMETERS_NOFAN));
+
+	hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution =
+		powerplay_table->sThermalController.ucFanParameters &
+		ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK;
+
+	hwmgr->thermal_controller.fanInfo.ulMinRPM
+		= powerplay_table->sThermalController.ucFanMinRPM * 100UL;
+	hwmgr->thermal_controller.fanInfo.ulMaxRPM
+		= powerplay_table->sThermalController.ucFanMaxRPM * 100UL;
+
+	set_hw_cap(hwmgr,
+		   ATOM_PP_THERMALCONTROLLER_NONE != hwmgr->thermal_controller.ucType,
+		   PHM_PlatformCaps_ThermalController);
+
+	hwmgr->thermal_controller.use_hw_fan_control = 1;
+
 	return 0;
 }
 

2.20.1

From: Xiyu Yang <[email protected]>

[ Upstream commit 7717cbec172c3554d470023b4020d5781961187e ]

i2400mu_bus_bm_wait_for_ack() invokes usb_get_urb(), which increases the refcount of the "notif_urb".

When i2400mu_bus_bm_wait_for_ack() returns, local variable "notif_urb" becomes invalid, so the refcount should be decreased to keep refcount balanced.

The issue happens in all paths of i2400mu_bus_bm_wait_for_ack(), which forget to decrease the refcnt increased by usb_get_urb(), causing a refcnt leak.

Fix this issue by calling usb_put_urb() before the i2400mu_bus_bm_wait_for_ack() returns.

---
 drivers/net/wimax/i2400m/usb-fw.c | 1 +
 1 file changed, 1 insertion(+)

index 529ebca1e9e13..1f7709d24f352 100644
@@ -354,6 +354,7 @@ ssize_t i2400mu_bus_bm_wait_for_ack(struct i2400m *i2400m,
 		usb_autopm_put_interface(i2400mu->usb_iface);
 	d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %ld\n",
 		i2400m, ack, ack_size, (long) result);
+	usb_put_urb(&notif_urb);
 	return result;
 
 error_exceeded:

2.20.1

From: Julien Beraud <[email protected]>

[ Upstream commit 15ce30609d1e88d42fb1cd948f453e6d5f188249 ]

There are 2 registers to write to enable a ptp ref clock coming from the fpga.
One that enables the usage of the clock from the fpga for emac0 and emac1 as a ptp ref clock, and the other to allow signals from the fpga to reach emac0 and emac1.
Currently, if the dwmac-socfpga has phymode set to PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, or PHY_INTERFACE_MODE_SGMII, both registers will be written and the ptp ref clock will be set as coming from the fpga. Separate the 2 register writes to only enable signals from the fpga to reach emac0 or emac1 when ptp ref clock is not coming from the fpga.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

index fa32cd5b418ef..70d41783329dd 100644
@@ -291,16 +291,19 @@ static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac)
 	    phymode == PHY_INTERFACE_MODE_MII ||
 	    phymode == PHY_INTERFACE_MODE_GMII ||
 	    phymode == PHY_INTERFACE_MODE_SGMII) {
-		ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
 		regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
 			    &module);
 		module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2));
 		regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
 			     module);
-	} else {
-		ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2));
 	}
 
+	if (dwmac->f2h_ptp_ref_clk)
+		ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
+	else
+		ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK <<
+			  (reg_shift / 2));
+
 	regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
 
 	/* Deassert reset for the phy configuration to be sampled by

2.20.1

From: Julien Beraud <[email protected]>

[ Upstream commit 91a2559c1dc5b0f7e1256d42b1508935e8eabfbf ]

In fine adjustement mode, which is the current default, the sub-second
increment register is the number of nanoseconds that will be added to the clock when the accumulator overflows. At each clock cycle, the value of the addend register is added to the accumulator. Currently, we use 20ns = 1e09ns / 50MHz as this value whatever the frequency of the ptp clock actually is.
The adjustment is then done on the addend register, only incrementing every X clock cycles X being the ratio between 50MHz and ptp_clock_rate (addend = 2^32 * 50MHz/ptp_clock_rate).
This causes the following issues :
- In case the frequency of the ptp clock is inferior or equal to 50MHz, the addend value calculation will overflow and the default addend value will be set to 0, causing the clock to not work at all. (For instance, for ptp_clock_rate = 50MHz, addend = 2^32).
- The resolution of the timestamping clock is limited to 20ns while it is not needed, thus limiting the accuracy of the timestamping to 20ns.

Fix this by setting sub-second increment to 2e09ns / ptp_clock_rate. It will allow to reach the minimum possible frequency for ptp_clk_ref, which is 5MHz for GMII 1000Mps Full-Duplex by setting the sub-second-increment to a higher value. For instance, for 25MHz, it gives ssinc = 80ns and default_addend = 2^31.
It will also allow to use a lower value for sub-second-increment, thus improving the timestamping accuracy with frequencies higher than 100MHz, for instance, for 200MHz, ssinc = 10ns and default_addend = 2^31.

v1->v2:
- Remove modifications to the calculation of default addend, which broke compatibility with clock frequencies for which 2000000000 / ptp_clk_freq is not an integer.
- Modify description according to discussions.

---
 .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c    | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

index 0201596225592..e5d9007c8090b 100644
@@ -26,12 +26,16 @@ static void config_sub_second_increment(void __iomem *ioaddr,
 	unsigned long data;
 	u32 reg_value;
 
-	/* For GMAC3.x, 4.x versions, convert the ptp_clock to nano second
-	 *	formula = (1/ptp_clock) * 1000000000
-	 * where ptp_clock is 50MHz if fine method is used to update system
+	/* For GMAC3.x, 4.x versions, in "fine adjustement mode" set sub-second
+	 * increment to twice the number of nanoseconds of a clock cycle.
+	 * The calculation of the default_addend value by the caller will set it
+	 * to mid-range = 2^31 when the remainder of this division is zero,
+	 * which will make the accumulator overflow once every 2 ptp_clock
+	 * cycles, adding twice the number of nanoseconds of a clock cycle :
+	 * 2000000000ULL / ptp_clock.
 	 */
 	if (value & PTP_TCR_TSCFUPDT)
-		data = (1000000000ULL / 50000000);
+		data = (2000000000ULL / ptp_clock);
 	else
 		data = (1000000000ULL / ptp_clock);
 

2.20.1

From: Matthias Blankertz <[email protected]>

[ Upstream commit 0c258657ddfe81b4fc0183378d800c97ba0b7cdd ]

The master SSI of a multi-SSI setup was attached both to the RSND_MOD_SSI slot and the RSND_MOD_SSIP slot of the rsnd_dai_stream. This is not correct wrt. the meaning of being "parent" in the rest of the SSI code, where it seems to indicate an SSI that provides clock and word sync but is not transmitting/receiving audio data.

Not treating the multi-SSI master as parent allows removal of various special cases to the rsnd_ssi_is_parent conditions introduced in commit a09fb3f28a60 ("ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode"). It also fixes the issue that operations performed via rsnd_dai_call() were performed twice for the master SSI. This caused some "status check failed" spam when stopping a multi-SSI stream as the driver attempted to stop the master SSI twice.

---
 sound/soc/sh/rcar/ssi.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

index d51fb3a394486..9900a4f6f4e53 100644
@@ -407,7 +407,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod,
 	 * We shouldn't exchange SWSP after running.
 	 * This means, parent needs to care it.
 	 */
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		goto init_end;
 
 	if (rsnd_io_is_play(io))

@@ -559,7 +559,7 @@ static int rsnd_ssi_start(struct rsnd_mod *mod,
 	 * EN is for data output.
 	 * SSI parent EN is not needed.
 	 */
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		return 0;
 
 	ssi->cr_en = EN;

@@ -582,7 +582,7 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
 	if (!rsnd_ssi_is_run_mods(mod, io))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		return 0;
 
 	cr  =	ssi->cr_own	|

@@ -620,7 +620,7 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod,
 	if (rsnd_is_gen1(priv))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		return 0;
 
 	if (!rsnd_ssi_is_run_mods(mod, io))

@@ -737,6 +737,9 @@ static void rsnd_ssi_parent_attach(struct rsnd_mod *mod,
 	if (!rsnd_rdai_is_clk_master(rdai))
 		return;
 
+	if (rsnd_ssi_is_multi_slave(mod, io))
+		return;
+
 	switch (rsnd_mod_id(mod)) {
 	case 1:
 	case 2:

2.20.1

From: Matthias Blankertz <[email protected]>

[ Upstream commit 54cb6221688660670a2e430892d7f4e6370263b8 ]

Fix the rsnd_ssi_stop function to skip disabling the individual SSIs of a multi-SSI setup, as the actual stop is performed by rsnd_ssiu_stop_gen2
- the same logic as in rsnd_ssi_start. The attempt to disable these SSIs was harmless, but caused a "status check failed" message to be printed for every SSI in the multi-SSI setup.
The disabling of interrupts is still performed, as they are enabled for all SSIs in rsnd_ssi_init, but care is taken to not accidentally set the EN bit for an SSI where it was not set by rsnd_ssi_start.

---
 sound/soc/sh/rcar/ssi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

index 9900a4f6f4e53..4a7d3413917fc 100644
@@ -594,10 +594,16 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
 	 * Capture:  It might not receave data. Do nothing
 	 */
 	if (rsnd_io_is_play(io)) {
-		rsnd_mod_write(mod, SSICR, cr | EN);
+		rsnd_mod_write(mod, SSICR, cr | ssi->cr_en);
 		rsnd_ssi_status_check(mod, DIRQ);
 	}
 
+	/* In multi-SSI mode, stop is performed by setting ssi0129 in
+	 * SSI_CONTROL to 0 (in rsnd_ssio_stop_gen2). Do nothing here.
+	 */
+	if (rsnd_ssi_multi_slaves_runtime(io))
+		return 0;
+
 	/*
 	 * disable SSI,
 	 * and, wait idle state

2.20.1

From: Ronnie Sahlberg <[email protected]>

[ Upstream commit fada37f6f62995cc449b36ebba1220594bfe55fe ]

We use a spinlock while we are reading and accessing the destination address for a server. We need to also use this spinlock to protect when we are modifying this address from reconn_set_ipaddr().

---
 fs/cifs/connect.c | 2 ++
 1 file changed, 2 insertions(+)

index 4804d1df8c1cf..d4a23b48e24d8 100644
@@ -375,8 +375,10 @@ static int reconn_set_ipaddr(struct TCP_Server_Info *server)
 		return rc;
 	}
 
+	spin_lock(&cifs_tcp_ses_lock);
 	rc = cifs_convert_address((struct sockaddr *)&server->dstaddr, ipaddr,
 				  strlen(ipaddr));
+	spin_unlock(&cifs_tcp_ses_lock);
 	kfree(ipaddr);
 
 	return !rc ? -1 : 0;

2.20.1

From: Jeremie Francois (on alpha) <[email protected]>

[ Upstream commit e461bc9f9ab105637b86065d24b0b83f182d477c ]

Sed broke on some strings as it used colon as a separator. I made it more robust by using \001, which is legit POSIX AFAIK.

E.g. ./config --set-str CONFIG_USBNET_DEVADDR "de:ad:be:ef:00:01" failed with: sed: -e expression #1, char 55: unknown option to `s'

---
 scripts/config | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

index e0e39826dae90..eee5b7f3a092a 100755
@@ -7,6 +7,9 @@ myname=${0##*/}
 # If no prefix forced, use the default CONFIG_
 CONFIG_="${CONFIG_-CONFIG_}"
 
+# We use an uncommon delimiter for sed substitutions
+SED_DELIM=$(echo -en "\001")
+
 usage() {
 	cat >&2 <<EOL
 Manipulate options in a .config file from the command line.

@@ -83,7 +86,7 @@ txt_subst() {
 	local infile="$3"
 	local tmpfile="$infile.swp"
 
-	sed -e "s:$before:$after:" "$infile" >"$tmpfile"
+	sed -e "s$SED_DELIM$before$SED_DELIM$after$SED_DELIM" "$infile" >"$tmpfile"
 	# replace original file with the edited one
 	mv "$tmpfile" "$infile"
 }

2.20.1

From: Paulo Alcantara <[email protected]>

[ Upstream commit 65303de829dd6d291a4947c1a31de31896f8a060 ]

This disables tcon re-use for DFS shares.

tcon->dfs_path stores the path that the tcon should connect to when doing failing over.

If that tcon is used multiple times e.g. 2 mounts using it with different prefixpath, each will need a different dfs_path but there is only one tcon. The other solution would be to split the tcon in 2 tcons during failover but that is much harder.

tcons could not be shared with DFS in cifs.ko because in a DFS namespace like:

          //domain/dfsroot -> /serverA/dfsroot, /serverB/dfsroot

          //serverA/dfsroot/link -> /serverA/target1/aa/bb

          //serverA/dfsroot/link2 -> /serverA/target1/cc/dd

you can see that link and link2 are two DFS links that both resolve to the same target share (/serverA/target1), so cifs.ko will only contain a single tcon for both link and link2.

The problem with that is, if we (auto)mount "link" and "link2", cifs.ko will only contain a single tcon for both DFS links so we couldn't perform failover or refresh the DFS cache for both links because tcon->dfs_path was set to either "link" or "link2", but not both -- which is wrong.

---
 fs/cifs/connect.c | 4 ++++
 1 file changed, 4 insertions(+)

index d4a23b48e24d8..9c614d6916c2d 100644
@@ -3419,6 +3419,10 @@ cifs_find_tcon(struct cifs_ses *ses, struct smb_vol *volume_info)
 	spin_lock(&cifs_tcp_ses_lock);
 	list_for_each(tmp, &ses->tcon_list) {
 		tcon = list_entry(tmp, struct cifs_tcon, tcon_list);
+#ifdef CONFIG_CIFS_DFS_UPCALL
+		if (tcon->dfs_path)
+			continue;
+#endif
 		if (!match_tcon(tcon, volume_info))
 			continue;
 		++tcon->tc_count;

2.20.1

From: Vamshi K Sthambamkadi <[email protected]>

[ Upstream commit 9da73974eb9c965dd9989befb593b8c8da9e4bdc ]

kmemleak report 1:

    [<9092c50b>] kmem_cache_alloc_trace+0x138/0x270
    [<05a2c9ed>] create_field_var+0xcf/0x180
    [<528a2d68>] action_create+0xe2/0xc80
    [<63f50b61>] event_hist_trigger_func+0x15b5/0x1920
    [<28ea5d3d>] trigger_process_regex+0x7b/0xc0
    [<3138e86f>] event_trigger_write+0x4d/0xb0
    [<ffd66c19>] __vfs_write+0x30/0x200
    [<4f424a0d>] vfs_write+0x96/0x1b0
    [<da59a290>] ksys_write+0x53/0xc0
    [<3717101a>] __ia32_sys_write+0x15/0x20
    [<c5f23497>] do_fast_syscall_32+0x70/0x250
    [<46e2629c>] entry_SYSENTER_32+0xaf/0x102

This is because save_vars[] of struct hist_trigger_data are not destroyed

kmemleak report 2:

    [<9092c50b>] kmem_cache_alloc_trace+0x138/0x270
    [<6e5e97c5>] create_var+0x3c/0x110
    [<de82f1b9>] create_field_var+0xaf/0x180
    [<528a2d68>] action_create+0xe2/0xc80
    [<63f50b61>] event_hist_trigger_func+0x15b5/0x1920
    [<28ea5d3d>] trigger_process_regex+0x7b/0xc0
    [<3138e86f>] event_trigger_write+0x4d/0xb0
    [<ffd66c19>] __vfs_write+0x30/0x200
    [<4f424a0d>] vfs_write+0x96/0x1b0
    [<da59a290>] ksys_write+0x53/0xc0
    [<3717101a>] __ia32_sys_write+0x15/0x20
    [<c5f23497>] do_fast_syscall_32+0x70/0x250
    [<46e2629c>] entry_SYSENTER_32+0xaf/0x102

struct hist_field allocated through create_var() do not initialize "ref" field to 1. The code in __destroy_hist_field() does not destroy object if "ref" is initialized to zero, the condition
if (--hist_field->ref > 1) always passes since unsigned int wraps.

kmemleak report 3:

    [<f8666fcc>] __kmalloc_track_caller+0x139/0x2b0
    [<bb7f80a5>] kstrdup+0x27/0x50
    [<39d70006>] init_var_ref+0x58/0xd0
    [<8ca76370>] create_var_ref+0x89/0xe0
    [<f045fc39>] action_create+0x38f/0xc80
    [<7c146821>] event_hist_trigger_func+0x15b5/0x1920
    [<07de3f61>] trigger_process_regex+0x7b/0xc0
    [<e87daf8f>] event_trigger_write+0x4d/0xb0
    [<19bf1512>] __vfs_write+0x30/0x200
    [<64ce4d27>] vfs_write+0x96/0x1b0
    [<a6f34170>] ksys_write+0x53/0xc0
    [<7d4230cd>] __ia32_sys_write+0x15/0x20
    [<8eadca00>] do_fast_syscall_32+0x70/0x250
    [<235cf985>] entry_SYSENTER_32+0xaf/0x102

hist_fields (system & event_name) are not freed

---
 kernel/trace/trace_events_hist.c | 7 +++++++
 1 file changed, 7 insertions(+)

index 5f6834a2bf411..fcab11cc6833b 100644
@@ -3320,6 +3320,9 @@ static void __destroy_hist_field(struct hist_field *hist_field)
 	kfree(hist_field->name);
 	kfree(hist_field->type);
 
+	kfree(hist_field->system);
+	kfree(hist_field->event_name);
+
 	kfree(hist_field);
 }
 

@@ -4382,6 +4385,7 @@ static struct hist_field *create_var(struct hist_trigger_data *hist_data,
 		goto out;
 	}
 
+	var->ref = 1;
 	var->flags = HIST_FIELD_FL_VAR;
 	var->var.idx = idx;
 	var->var.hist_data = var->hist_data = hist_data;

@@ -5011,6 +5015,9 @@ static void destroy_field_vars(struct hist_trigger_data *hist_data)
 
 	for (i = 0; i < hist_data->n_field_vars; i++)
 		destroy_field_var(hist_data->field_vars[i]);
+
+	for (i = 0; i < hist_data->n_save_vars; i++)
+		destroy_field_var(hist_data->save_vars[i]);
 }
 
 static void save_field_var(struct hist_trigger_data *hist_data,

2.20.1

From: Steven Rostedt (VMware) <[email protected]>

[ Upstream commit 353da87921a5ec654e7e9024e083f099f1b33c97 ]

kmemleak reported the following:

unreferenced object 0xffff90d47127a920 (size 32):
comm "modprobe", pid 1766, jiffies 4294792031 (age 162.568s) hex dump (first 32 bytes):

    00 00 00 00 00 00 00 00 22 01 00 00 00 00 ad de  ........".......
    00 78 12 a7 ff ff ff ff 00 00 b6 c0 ff ff ff ff  .x..............
  backtrace:
    [<00000000bb79e72e>] register_ftrace_direct+0xcb/0x3a0
    [<00000000295e4f79>] do_one_initcall+0x72/0x340
    [<00000000873ead18>] do_init_module+0x5a/0x220
    [<00000000974d9de5>] load_module+0x2235/0x2550
    [<0000000059c3d6ce>] __do_sys_finit_module+0xc0/0x120
    [<000000005a8611b4>] do_syscall_64+0x60/0x230
    [<00000000a0cdc49e>] entry_SYSCALL_64_after_hwframe+0x49/0xb3

The entry used to save the direct descriptor needs to be freed when unregistering.

---
 kernel/trace/ftrace.c | 1 +
 1 file changed, 1 insertion(+)

index fd81c7de77a70..63089c70adbb6 100644
@@ -5155,6 +5155,7 @@ int unregister_ftrace_direct(unsigned long ip, unsigned long addr)
 			list_del_rcu(&direct->next);
 			synchronize_rcu_tasks();
 			kfree(direct);
+			kfree(entry);
 			ftrace_direct_func_count--;
 		}
 	}

2.20.1

From: Russell King <[email protected]>

[ Upstream commit 796a8fa28980050bf1995617f0876484f3dc1026 ]

Clear the link partner advertisement, speed, duplex and pause when the link goes down, as other phylib drivers do. This avoids the stale link partner, speed and duplex settings being reported via ethtool.

---
 drivers/net/phy/bcm84881.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

index 14d55a77eb28a..1260115829283 100644
@@ -174,9 +174,6 @@ static int bcm84881_read_status(struct phy_device *phydev)
 	if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete)
 		phydev->link = false;
 
-	if (!phydev->link)
-		return 0;
-
 	linkmode_zero(phydev->lp_advertising);
 	phydev->speed = SPEED_UNKNOWN;
 	phydev->duplex = DUPLEX_UNKNOWN;

@@ -184,6 +181,9 @@ static int bcm84881_read_status(struct phy_device *phydev)
 	phydev->asym_pause = 0;
 	phydev->mdix = 0;
 
+	if (!phydev->link)
+		return 0;
+
 	if (phydev->autoneg_complete) {
 		val = genphy_c45_read_lpa(phydev);
 		if (val < 0)

2.20.1

From: Nathan Chancellor <[email protected]>

[ Upstream commit 5990cdee689c6885b27c6d969a3d58b09002b0bc ]

0day reports over and over on an powerpc randconfig with clang:

lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions

Remove the superfluous casts, which have been done previously for x86 and arm32 in commit dea632cadd12 ("lib/mpi: fix build with clang") and commit 7b7c1df2883d ("lib/mpi/longlong.h: fix building with 32-bit x86").

---
 lib/mpi/longlong.h | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

index 2dceaca27489c..891e1c3549c46 100644
@@ -722,22 +722,22 @@ do {									\
 do { \
 	if (__builtin_constant_p(bh) && (bh) == 0) \
 		__asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "%r" ((USItype)(ah)), \
 		"%r" ((USItype)(al)), \
 		"rI" ((USItype)(bl))); \
 	else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \
 		__asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "%r" ((USItype)(ah)), \
 		"%r" ((USItype)(al)), \
 		"rI" ((USItype)(bl))); \
 	else \
 		__asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "%r" ((USItype)(ah)), \
 		"r" ((USItype)(bh)), \
 		"%r" ((USItype)(al)), \

@@ -747,36 +747,36 @@ do { \
 do { \
 	if (__builtin_constant_p(ah) && (ah) == 0) \
 		__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "r" ((USItype)(bh)), \
 		"rI" ((USItype)(al)), \
 		"r" ((USItype)(bl))); \
 	else if (__builtin_constant_p(ah) && (ah) == ~(USItype) 0) \
 		__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "r" ((USItype)(bh)), \
 		"rI" ((USItype)(al)), \
 		"r" ((USItype)(bl))); \
 	else if (__builtin_constant_p(bh) && (bh) == 0) \
 		__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "r" ((USItype)(ah)), \
 		"rI" ((USItype)(al)), \
 		"r" ((USItype)(bl))); \
 	else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \
 		__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "r" ((USItype)(ah)), \
 		"rI" ((USItype)(al)), \
 		"r" ((USItype)(bl))); \
 	else \
 		__asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "r" ((USItype)(ah)), \
 		"r" ((USItype)(bh)), \
 		"rI" ((USItype)(al)), \

@@ -787,7 +787,7 @@ do { \
 do { \
 	USItype __m0 = (m0), __m1 = (m1); \
 	__asm__ ("mulhwu %0,%1,%2" \
-	: "=r" ((USItype) ph) \
+	: "=r" (ph) \
 	: "%r" (__m0), \
 	"r" (__m1)); \
 	(pl) = __m0 * __m1; \

2.20.1

From: Madhuparna Bhowmik <[email protected]>

[ Upstream commit 8ca47eb9f9e4e10e7e7fa695731a88941732c38d ]

The function sta_info_get_by_idx() uses RCU list primitive. It is called with local->sta_mtx held from mac80211/cfg.c. Add lockdep expression to avoid any false positive RCU list warnings.

---
 net/mac80211/sta_info.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index e3572be307d6c..149ed0510778d 100644
@@ -231,7 +231,8 @@ struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata,
 	struct sta_info *sta;
 	int i = 0;
 
-	list_for_each_entry_rcu(sta, &local->sta_list, list) {
+	list_for_each_entry_rcu(sta, &local->sta_list, list,
+				lockdep_is_held(&local->sta_mtx)) {
 		if (sdata != sta->sdata)
 			continue;
 		if (i < idx) {

2.20.1

From: Doug Berger <[email protected]>

[ Upstream commit ecaeceb8a8a145d93c7e136f170238229165348f ]

The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign.

However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing.

This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface.

---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index b7c0c20e13258..5fd1a9dfcfff3 100644
@@ -1625,7 +1625,8 @@ static struct sk_buff *bcmgenet_rx_refill(struct bcmgenet_priv *priv,
 	dma_addr_t mapping;
 
 	/* Allocate a new Rx skb */
-	skb = netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT);
+	skb = __netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT,
+				 GFP_ATOMIC | __GFP_NOWARN);
 	if (!skb) {
 		priv->mib.alloc_rx_buff_failed++;
 		netif_err(priv, rx_err, priv->dev,

2.20.1

From: Doug Berger <[email protected]>

[ Upstream commit 3554e54a46125030c534820c297ed7f6c3907e24 ]

The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign.

However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing.

This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface.

---
 drivers/net/ethernet/broadcom/bcmsysport.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index 15b31cddc054b..2e4b4188659a9 100644
@@ -666,7 +666,8 @@ static struct sk_buff *bcm_sysport_rx_refill(struct bcm_sysport_priv *priv,
 	dma_addr_t mapping;
 
 	/* Allocate a new SKB for a new packet */
-	skb = netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH);
+	skb = __netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH,
+				 GFP_ATOMIC | __GFP_NOWARN);
 	if (!skb) {
 		priv->mib.alloc_rx_buff_failed++;
 		netif_err(priv, rx_err, ndev, "SKB alloc failed\n");

2.20.1

From: Andrii Nakryiko <[email protected]>

[ Upstream commit dfc55ace9939e1e8703ad37ddbba41aaa31cc0cb ]

Reorder include paths to ensure that runqslower sources are picking up vmlinux.h, generated by runqslower's own Makefile. When runqslower is built from selftests/bpf, due to current -I$(BPF_INCLUDE) -I$(OUTPUT) ordering, it might pick up not-yet-complete vmlinux.h, generated by selftests Makefile, which could lead to compilation errors like [0]. So ensure that -I$(OUTPUT) goes first and rely on runqslower's Makefile own dependency chain to ensure vmlinux.h is properly completed before source code relying on it is compiled.

[0] https://travis-ci.org/github/libbpf/libbpf/jobs/677905925

---
 tools/bpf/runqslower/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 39edd68afa8e0..8a6f82e56a249 100644
@@ -8,7 +8,7 @@ BPFTOOL ?= $(DEFAULT_BPFTOOL)
 LIBBPF_SRC := $(abspath ../../lib/bpf)
 BPFOBJ := $(OUTPUT)/libbpf.a
 BPF_INCLUDE := $(OUTPUT)
-INCLUDES := -I$(BPF_INCLUDE) -I$(OUTPUT) -I$(abspath ../../lib)
+INCLUDES := -I$(OUTPUT) -I$(BPF_INCLUDE) -I$(abspath ../../lib)
 CFLAGS := -g -Wall
 
 # Try to detect best kernel BTF source

2.20.1

From: Jere Leppänen <[email protected]>

commit 12dfd78e3a74825e6f0bc8df7ef9f938fbc6bfe3 upstream.

When starting shutdown in sctp_sf_do_dupcook_a(), get the value for SHUTDOWN Cumulative TSN Ack from the new association, which is reconstructed from the cookie, instead of the old association, which the peer doesn't have anymore.

Otherwise the SHUTDOWN is either ignored or replied to with an ABORT by the peer because CTSN Ack doesn't match the peer's Initial TSN.

---
 net/sctp/sm_make_chunk.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

@@ -858,7 +858,11 @@ struct sctp_chunk *sctp_make_shutdown(co
 	struct sctp_chunk *retval;
 	__u32 ctsn;
 
-	ctsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map);
+	if (chunk && chunk->asoc)
+		ctsn = sctp_tsnmap_get_ctsn(&chunk->asoc->peer.tsn_map);
+	else
+		ctsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map);
+
 	shut.cum_tsn_ack = htonl(ctsn);
 
 	retval = sctp_make_control(asoc, SCTP_CID_SHUTDOWN, 0,

From: Aaron Ma <[email protected]>

commit 5932d260a8d85a103bd6c504fbb85ff58b156bf9 upstream.

On ARCTURUS and RENOIR, powerplay is not supported yet. When plug in or unplug power jack, ACPI event will issue. Then kernel NULL pointer BUG will be triggered. Check for NULL pointers before calling.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -91,7 +91,8 @@ void amdgpu_pm_acpi_event_handler(struct
 			adev->pm.ac_power = true;
 		else
 			adev->pm.ac_power = false;
-		if (adev->powerplay.pp_funcs->enable_bapm)
+		if (adev->powerplay.pp_funcs &&
+		    adev->powerplay.pp_funcs->enable_bapm)
 			amdgpu_dpm_enable_bapm(adev, adev->pm.ac_power);
 		mutex_unlock(&adev->pm.mutex);
 	}

From: Takashi Iwai <[email protected]>

commit 977dfef40c8996b69afe23a9094d184049efb7bb upstream.

The commit 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist") added a new blacklist for the devices that are known to have empty codecs, and one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f). However, it turned out that the very same PCI SSID is used for the previous model that does have the valid HD-audio codecs and the change broke the sound on it.

Since the empty codec problem appear on the certain AMD platform (PCI ID 1022:1487), this patch changes the blacklist matching to both PCI ID and SSID using pci_match_id(). Also, the entry that was removed by the previous fix for ASUS ROG Zenigh II is re-added.

---
 sound/pci/hda/hda_intel.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

@@ -2075,9 +2075,10 @@ static void pcm_mmap_prepare(struct snd_
  * some HD-audio PCI entries are exposed without any codecs, and such devices
  * should be ignored from the beginning.
  */
-static const struct snd_pci_quirk driver_blacklist[] = {
-	SND_PCI_QUIRK(0x1462, 0xcb59, "MSI TRX40 Creator", 0),
-	SND_PCI_QUIRK(0x1462, 0xcb60, "MSI TRX40", 0),
+static const struct pci_device_id driver_blacklist[] = {
+	{ PCI_DEVICE_SUB(0x1022, 0x1487, 0x1043, 0x874f) }, /* ASUS ROG Zenith II / Strix */
+	{ PCI_DEVICE_SUB(0x1022, 0x1487, 0x1462, 0xcb59) }, /* MSI TRX40 Creator */
+	{ PCI_DEVICE_SUB(0x1022, 0x1487, 0x1462, 0xcb60) }, /* MSI TRX40 */
 	{}
 };
 

@@ -2097,7 +2098,7 @@ static int azx_probe(struct pci_dev *pci
 	bool schedule_probe;
 	int err;
 
-	if (snd_pci_quirk_lookup(pci, driver_blacklist)) {
+	if (pci_match_id(driver_blacklist, pci)) {
 		dev_info(&pci->dev, "Skipping the blacklisted device\n");
 		return -ENODEV;
 	}

From: Qian Cai <[email protected]>

commit 514ccc194971d0649e4e7ec8a9b3a6e33561d7bf upstream.

The commit 842f4be95899 ("KVM: VMX: Add a trampoline to fix VMREAD error handling") removed the declaration of vmread_error() causes a W=1 build failure with KVM_WERROR=y. Fix it by adding it back.

arch/x86/kvm/vmx/vmx.c:359:17: error: no previous prototype for 'vmread_error' [-Werror=missing-prototypes]
asmlinkage void vmread_error(unsigned long field, bool fault)

                 ^~~~~~~~~~~~

Message-Id: <[email protected]>

---
 arch/x86/kvm/vmx/ops.h |    1 +
 1 file changed, 1 insertion(+)

@@ -12,6 +12,7 @@
 
 #define __ex(x) __kvm_handle_fault_on_reboot(x)
 
+asmlinkage void vmread_error(unsigned long field, bool fault);
 __attribute__((regparm(0))) void vmread_error_trampoline(unsigned long field,
 							 bool fault);
 void vmwrite_error(unsigned long field, unsigned long value);

From: Hans de Goede <[email protected]>

commit 1d6f8c5bac93cceb2d4ac8e6331050652004d802 upstream.

Commit 1f27dbd8265d ("platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits") changed the module-param sanity check to accept temperature limits between 20 and 90 degrees celcius.

But the error message printed when the module params are outside this range was not updated. This commit updates the error message to match the new min and max value for the temp-limits.

---
 drivers/platform/x86/gpd-pocket-fan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -128,7 +128,7 @@ static int gpd_pocket_fan_probe(struct p
 
 	for (i = 0; i < ARRAY_SIZE(temp_limits); i++) {
 		if (temp_limits[i] < 20000 || temp_limits[i] > 90000) {
-			dev_err(&pdev->dev, "Invalid temp-limit %d (must be between 40000 and 70000)\n",
+			dev_err(&pdev->dev, "Invalid temp-limit %d (must be between 20000 and 90000)\n",
 				temp_limits[i]);
 			temp_limits[0] = TEMP_LIMIT0_DEFAULT;
 			temp_limits[1] = TEMP_LIMIT1_DEFAULT;

From: Rafael J. Wysocki <[email protected]>

commit 243a98894dc525ad2fbeb608722fcb682be3186d upstream.

Fix a comment in acpi_s2idle_prepare_late() that has become outdated after commit f0ac20c3f613 ("ACPI: EC: Fix flushing of pending work").

---
 drivers/acpi/sleep.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

@@ -982,10 +982,7 @@ static int acpi_s2idle_prepare_late(void
 
 static void acpi_s2idle_sync(void)
 {
-	/*
-	 * The EC driver uses the system workqueue and an additional special
-	 * one, so those need to be flushed too.
-	 */
+	/* The EC driver uses special workqueues that need to be flushed. */
 	acpi_ec_flush_work();
 	acpi_os_wait_events_complete(); /* synchronize Notify handling */
 }

From: Thomas Pedersen <[email protected]>

commit 30b2f0be23fb40e58d0ad2caf8702c2a44cda2e1 upstream.

commit 08a5bdde3812 ("mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED") Fixed a bug where we failed to take into account a
nullfunc frame can be either non-QoS or QoS. It turns out
there is at least one more bug in
ieee80211_sta_tx_notify(), introduced in
commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing"),
where we forgot to check for the QoS variant and so
assumed the QoS nullfunc frame never went out

Fix this by adding a helper ieee80211_is_any_nullfunc() which consolidates the check for non-QoS and QoS nullfunc frames. Replace existing compound conditionals and add a couple more missing checks for QoS variant.

---
 include/linux/ieee80211.h |    9 +++++++++
 net/mac80211/mlme.c       |    2 +-
 net/mac80211/rx.c         |    8 +++-----
 net/mac80211/status.c     |    5 ++---
 net/mac80211/tx.c         |    2 +-
 5 files changed, 16 insertions(+), 10 deletions(-)

@@ -620,6 +620,15 @@ static inline bool ieee80211_is_qos_null
 }
 
 /**
+ * ieee80211_is_any_nullfunc - check if frame is regular or QoS nullfunc frame
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_any_nullfunc(__le16 fc)
+{
+	return (ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc));
+}
+
+/**
  * ieee80211_is_bufferable_mmpdu - check if frame is bufferable MMPDU
  * @fc: frame control field in little-endian byteorder
  */

@@ -2460,7 +2460,7 @@ void ieee80211_sta_tx_notify(struct ieee
 	if (!ieee80211_is_data(hdr->frame_control))
 	    return;
 
-	if (ieee80211_is_nullfunc(hdr->frame_control) &&
+	if (ieee80211_is_any_nullfunc(hdr->frame_control) &&
 	    sdata->u.mgd.probe_send_count > 0) {
 		if (ack)
 			ieee80211_sta_reset_conn_monitor(sdata);

@@ -1450,8 +1450,7 @@ ieee80211_rx_h_check_dup(struct ieee8021
 		return RX_CONTINUE;
 
 	if (ieee80211_is_ctl(hdr->frame_control) ||
-	    ieee80211_is_nullfunc(hdr->frame_control) ||
-	    ieee80211_is_qos_nullfunc(hdr->frame_control) ||
+	    ieee80211_is_any_nullfunc(hdr->frame_control) ||
 	    is_multicast_ether_addr(hdr->addr1))
 		return RX_CONTINUE;
 

@@ -1838,8 +1837,7 @@ ieee80211_rx_h_sta_process(struct ieee80
 	 * Drop (qos-)data::nullfunc frames silently, since they
 	 * are used only to control station power saving mode.
 	 */
-	if (ieee80211_is_nullfunc(hdr->frame_control) ||
-	    ieee80211_is_qos_nullfunc(hdr->frame_control)) {
+	if (ieee80211_is_any_nullfunc(hdr->frame_control)) {
 		I802_DEBUG_INC(rx->local->rx_handlers_drop_nullfunc);
 
 		/*

@@ -2319,7 +2317,7 @@ static int ieee80211_drop_unencrypted(st
 
 	/* Drop unencrypted frames if key is set. */
 	if (unlikely(!ieee80211_has_protected(fc) &&
-		     !ieee80211_is_nullfunc(fc) &&
+		     !ieee80211_is_any_nullfunc(fc) &&
 		     ieee80211_is_data(fc) && rx->key))
 		return -EACCES;
 

@@ -643,8 +643,7 @@ static void ieee80211_report_ack_skb(str
 		rcu_read_lock();
 		sdata = ieee80211_sdata_from_skb(local, skb);
 		if (sdata) {
-			if (ieee80211_is_nullfunc(hdr->frame_control) ||
-			    ieee80211_is_qos_nullfunc(hdr->frame_control))
+			if (ieee80211_is_any_nullfunc(hdr->frame_control))
 				cfg80211_probe_status(sdata->dev, hdr->addr1,
 						      cookie, acked,
 						      info->status.ack_signal,

@@ -1056,7 +1055,7 @@ static void __ieee80211_tx_status(struct
 			I802_DEBUG_INC(local->dot11FailedCount);
 	}
 
-	if ((ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc)) &&
+	if (ieee80211_is_any_nullfunc(fc) &&
 	    ieee80211_has_pm(fc) &&
 	    ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
 	    !(info->flags & IEEE80211_TX_CTL_INJECTED) &&

@@ -297,7 +297,7 @@ ieee80211_tx_h_check_assoc(struct ieee80
 	if (unlikely(test_bit(SCAN_SW_SCANNING, &tx->local->scanning)) &&
 	    test_bit(SDATA_STATE_OFFCHANNEL, &tx->sdata->state) &&
 	    !ieee80211_is_probe_req(hdr->frame_control) &&
-	    !ieee80211_is_nullfunc(hdr->frame_control))
+	    !ieee80211_is_any_nullfunc(hdr->frame_control))
 		/*
 		 * When software scanning only nullfunc frames (to notify
 		 * the sleep state to the AP) and probe requests (for the

From: Jiri Slaby <[email protected]>

commit 526f3d96b8f83b1b13d73bd0b5c79cc2c487ec8e upstream.

Commit 018d26fcd12a ("cgroup, netclassid: periodically release file_lock on classid") added a second cond_resched to write_classid indirectly by update_classid_task. Remove the one in write_classid.

---
 net/core/netclassid_cgroup.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

@@ -127,10 +127,8 @@ static int write_classid(struct cgroup_s
 	cs->classid = (u32)value;
 
 	css_task_iter_start(css, 0, &it);
-	while ((p = css_task_iter_next(&it))) {
+	while ((p = css_task_iter_next(&it)))
 		update_classid_task(p, cs->classid);
-		cond_resched();
-	}
 	css_task_iter_end(&it);
 
 	return 0;

From: Will Deacon <[email protected]>

commit b2a84de2a2deb76a6a51609845341f508c518c03 upstream.

Commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()") changed mremap() so that only the 'old' address is untagged, leaving the 'new' address in the form it was passed from userspace. This prevents the unexpected creation of aliasing virtual mappings in userspace, but looks a bit odd when you read the code.

Add a comment justifying the untagging behaviour in mremap().

---
 mm/mremap.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

@@ -606,6 +606,16 @@ SYSCALL_DEFINE5(mremap, unsigned long, a
 	LIST_HEAD(uf_unmap_early);
 	LIST_HEAD(uf_unmap);
 
+	/*
+	 * There is a deliberate asymmetry here: we strip the pointer tag
+	 * from the old address but leave the new address alone. This is
+	 * for consistency with mmap(), where we prevent the creation of
+	 * aliasing mappings in userspace by leaving the tag bits of the
+	 * mapping address intact. A non-zero tag will cause the subsequent
+	 * range checks to reject the address as invalid.
+	 *
+	 * See Documentation/arm64/tagged-address-abi.rst for more information.
+	 */
 	addr = untagged_addr(addr);
 
 	if (flags & ~(MREMAP_FIXED | MREMAP_MAYMOVE))

Build results:

	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 430 pass: 430 fail: 0

Guenter

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.6.12-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.6.y
git commit: 27749cf494a88f40047cf4c13a13536a41b454ed
git describe: v5.6.11-50-g27749cf494a8
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.6-oe/build/v5.6.11-50-g27749cf494a8

No regressions (compared to build v5.6.11)

No fixes (compared to build v5.6.11)

Ran 30848 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kselftest/drivers
* kselftest/filesystems
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-commands-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-syscalls-tests
* perf
* v4l2-compliance
* ltp-containers-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* kselftest/net
* kselftest/networking
* ltp-cap_bounds-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-fs-tests
* ltp-open-posix-tests
* ltp-sched-tests
* network-basic-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-native/networking
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* kselftest-vsyscall-mode-none/networking

Linaro LKFT
https://lkft.linaro.org

Thanks for testing all of these and letting me know.

greg k-h