dt-bindings: nvmem: Convert i.MX OCOTP to json-schema
Subsystems (3)
PATCH v2 1/3 dt-bindings: nvmem: Convert i.MX OCOTP to json-schema
Convert the i.MX OCOTP binding to DT schema format using json-schema.
---
Changes since V1:
- improve compatible;
- drop clocks description.
--- .../devicetree/bindings/nvmem/imx-ocotp.txt | 50 ------------ .../devicetree/bindings/nvmem/imx-ocotp.yaml | 95 ++++++++++++++++++++++ 2 files changed, 95 insertions(+), 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/nvmem/imx-ocotp.txt create mode 100644 Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
Documentation/devicetree/bindings/nvmem/imx-ocotp.txt deleted +0 -50
@@ -1,50 +0,0 @@ -Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings - -This binding represents the on-chip eFuse OTP controller found on -i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, -i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs. - -Required properties: -- compatible: should be one of - "fsl,imx6q-ocotp" (i.MX6Q/D/DL/S), - "fsl,imx6sl-ocotp" (i.MX6SL), or - "fsl,imx6sx-ocotp" (i.MX6SX), - "fsl,imx6ul-ocotp" (i.MX6UL), - "fsl,imx6ull-ocotp" (i.MX6ULL/ULZ), - "fsl,imx7d-ocotp" (i.MX7D/S), - "fsl,imx6sll-ocotp" (i.MX6SLL), - "fsl,imx7ulp-ocotp" (i.MX7ULP), - "fsl,imx8mq-ocotp" (i.MX8MQ), - "fsl,imx8mm-ocotp" (i.MX8MM), - "fsl,imx8mn-ocotp" (i.MX8MN), - "fsl,imx8mp-ocotp" (i.MX8MP), - followed by "syscon". -- #address-cells : Should be 1 -- #size-cells : Should be 1 -- reg: Should contain the register base and length. -- clocks: Should contain a phandle pointing to the gated peripheral clock. - -Optional properties: -- read-only: disable write access - -Optional Child nodes: - -- Data cells of ocotp: - Detailed bindings are described in bindings/nvmem/nvmem.txt - -Example: - ocotp: ocotp@21bc000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,imx6sx-ocotp", "syscon"; - reg = <0x021bc000 0x4000>; - clocks = <&clks IMX6SX_CLK_OCOTP>; - - tempmon_calib: calib@38 { - reg = <0x38 4>; - }; - - tempmon_temp_grade: temp-grade@20 { - reg = <0x20 4>; - }; - };
Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml new file +95 -0
95 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v2 2/3 dt-bindings: nvmem: Convert i.MX IIM to json-schema
Convert the i.MX IIM binding to DT schema format using json-schema.
---
Changes since V1:
- drop clocks description.
--- .../devicetree/bindings/nvmem/imx-iim.txt | 22 --------- .../devicetree/bindings/nvmem/imx-iim.yaml | 57 ++++++++++++++++++++++ 2 files changed, 57 insertions(+), 22 deletions(-) delete mode 100644 Documentation/devicetree/bindings/nvmem/imx-iim.txt create mode 100644 Documentation/devicetree/bindings/nvmem/imx-iim.yaml
Documentation/devicetree/bindings/nvmem/imx-iim.txt deleted +0 -22
@@ -1,22 +0,0 @@ -Freescale i.MX IC Identification Module (IIM) device tree bindings - -This binding represents the IC Identification Module (IIM) found on -i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs. - -Required properties: -- compatible: should be one of - "fsl,imx25-iim", "fsl,imx27-iim", - "fsl,imx31-iim", "fsl,imx35-iim", - "fsl,imx51-iim", "fsl,imx53-iim", -- reg: Should contain the register base and length. -- interrupts: Should contain the interrupt for the IIM -- clocks: Should contain a phandle pointing to the gated peripheral clock. - -Example: - - iim: iim@63f98000 { - compatible = "fsl,imx53-iim", "fsl,imx27-iim"; - reg = <0x63f98000 0x4000>; - interrupts = <69>; - clocks = <&clks IMX5_CLK_IIM_GATE>; - };
Documentation/devicetree/bindings/nvmem/imx-iim.yaml new file +57 -0
57 lines not on this page · raw message
Signature · 1 line
2.7.4
Re: [PATCH V2 2/3] dt-bindings: nvmem: Convert i.MX IIM to json-schema
Quoted 6 lines · Anson Huang
Convert the i.MX IIM binding to DT schema format using json-schema.
Signed-off-by Anson Huang <[email protected]>---
Changes since V1:
- drop clocks description.
Quoted 7 lines
--- .../devicetree/bindings/nvmem/imx-iim.txt | 22 --------- .../devicetree/bindings/nvmem/imx-iim.yaml | 57 ++++++++++++++++++++++ 2 files changed, 57 insertions(+), 22 deletions(-) delete mode 100644 Documentation/devicetree/bindings/nvmem/imx-iim.txt create mode 100644 Documentation/devicetree/bindings/nvmem/imx-iim.yaml
Applied, thanks!
PATCH v2 3/3 dt-bindings: nvmem: Convert MXS OCOTP to json-schema
In reply to Anson HuangConvert the MXS OCOTP binding to DT schema format using json-schema.
---
Changes since V1:
- drop clocks description.
--- .../devicetree/bindings/nvmem/mxs-ocotp.txt | 24 ----------- .../devicetree/bindings/nvmem/mxs-ocotp.yaml | 50 ++++++++++++++++++++++ 2 files changed, 50 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt create mode 100644 Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt deleted +0 -24
@@ -1,24 +0,0 @@ -On-Chip OTP Memory for Freescale i.MX23/i.MX28 - -Required properties : -- compatible : - - "fsl,imx23-ocotp" for i.MX23 - - "fsl,imx28-ocotp" for i.MX28 -- #address-cells : Should be 1 -- #size-cells : Should be 1 -- reg : Address and length of OTP controller registers -- clocks : Should contain a reference to the hbus clock - -= Data cells = -Are child nodes of mxs-ocotp, bindings of which as described in -bindings/nvmem/nvmem.txt - -Example for i.MX28: - - ocotp: ocotp@8002c000 { - compatible = "fsl,imx28-ocotp", "fsl,ocotp"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x8002c000 0x2000>; - clocks = <&clks 25>; - };
Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml new file +50 -0
50 lines not on this page · raw message
Signature · 1 line
2.7.4
Re: [PATCH V2 3/3] dt-bindings: nvmem: Convert MXS OCOTP to json-schema
Quoted 6 lines · Anson Huang
Convert the MXS OCOTP binding to DT schema format using json-schema.
Signed-off-by Anson Huang <[email protected]>---
Changes since V1:
- drop clocks description.
Quoted 7 lines
--- .../devicetree/bindings/nvmem/mxs-ocotp.txt | 24 ----------- .../devicetree/bindings/nvmem/mxs-ocotp.yaml | 50 ++++++++++++++++++++++ 2 files changed, 50 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt create mode 100644 Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
Applied, thanks!
Quoted 7 lines · Anson Huang
Convert the i.MX OCOTP binding to DT schema format using json-schema.
Signed-off-by Anson Huang <[email protected]>---
Changes since V1:
- improve compatible;
- drop clocks description.
Quoted 7 lines
--- .../devicetree/bindings/nvmem/imx-ocotp.txt | 50 ------------ .../devicetree/bindings/nvmem/imx-ocotp.yaml | 95 ++++++++++++++++++++++ 2 files changed, 95 insertions(+), 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/nvmem/imx-ocotp.txt create mode 100644 Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
Applied, thanks!