hw: Use qdev gpio rather than qemu_allocate_irqs()
v2 cover hw: Use qdev gpio rather than qemu_allocate_irqs()
Use a coccinelle script to convert few qemu_allocate_irqs() calls to the qdev gpio API.
One memory leak removed in hw/openrisc/pic_cpu.c
Since v1:
- Referrenced Coverity CID (Stafford)
- Reword AHCI description (Zoltan)
Philippe Mathieu-Daudé (3):
hw/ide/ahci: Use qdev gpio rather than qemu_allocate_irqs() hw/mips/mips_int: Use qdev gpio rather than qemu_allocate_irqs() hw/openrisc/pic_cpu: Use qdev gpio rather than qemu_allocate_irqs()
hw/ide/ahci.c | 6 ++---- hw/mips/mips_int.c | 6 ++---- hw/openrisc/pic_cpu.c | 5 ++--- 3 files changed, 6 insertions(+), 11 deletions(-)
Signature · 1 line
2.21.3
PATCH v2 1/3 hw/ide/ahci: Use qdev gpio rather than qemu_allocate_irqs()
When plugging/unplugging devices on a AHCI bus, we might leak the memory returned by qemu_allocate_irqs(). We can avoid this leak by switching to using qdev_init_gpio_in(); the base class finalize will free the irqs that this allocates under the hood.
Patch created mechanically using spatch with this script inspired from commit d6ef883d9d7:
@@
typedef qemu_irq;
identifier irqs, handler;
expression opaque, count, i;
@@
- qemu_irq *irqs;
...
- irqs = qemu_allocate_irqs(handler, opaque, count);
+ qdev_init_gpio_in(DEVICE(opaque), handler, count);
<+...
- irqs[i]
+ qdev_get_gpio_in(DEVICE(opaque), i)
...+> ?- g_free(irqs);
--- hw/ide/ahci.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
hw/ide/ahci.c +2 -4
@@ -1534,19 +1534,18 @@ void ahci_init(AHCIState *s, DeviceState *qdev)void ahci_realize (AHCIState *s,DeviceState *qdev,AddressSpace *as,int ports) { -qemu_irq *irqs;int i; s->as = as; s->ports = ports; s->dev =g_new0 (AHCIDevice, ports);ahci_reg_init (s); - irqs =qemu_allocate_irqs (ahci_irq_set, s, s->ports); +qdev_init_gpio_in (qdev, ahci_irq_set, s->ports);for (i =0 ; i < s->ports; i++) {AHCIDevice *ad = &s->dev[i];ide_bus_new (&ad->port,sizeof (ad->port), qdev, i,1 ); -ide_init2 (&ad->port, irqs[i]); +ide_init2 (&ad->port,qdev_get_gpio_in (qdev, i)); ad->hba = s; ad->port_no = i;
@@ -1554,7 +1553,6 @@ void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports) ad->port.dma->ops = &ahci_dma_ops;ide_register_restart_cb (&ad->port); } -g_free (irqs); }void ahci_uninit (AHCIState *s)
Signature · 1 line
2.21.3
PATCH v2 2/3 hw/mips/mips_int: Use qdev gpio rather than qemu_allocate_irqs()
In reply to Philippe Mathieu-DaudéSwitch to using the qdev gpio API which is preferred over qemu_allocate_irqs(). One step to eventually deprecate and remove qemu_allocate_irqs() one day.
Patch created mechanically using spatch with this script inspired from commit d6ef883d9d7:
@@
typedef qemu_irq;
identifier irqs, handler;
expression opaque, count, i;
@@
- qemu_irq *irqs;
...
- irqs = qemu_allocate_irqs(handler, opaque, count);
+ qdev_init_gpio_in(DEVICE(opaque), handler, count);
<+...
- irqs[i]
+ qdev_get_gpio_in(DEVICE(opaque), i)
...+> ?- g_free(irqs);
--- hw/mips/mips_int.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
hw/mips/mips_int.c +2 -4
@@ -74,14 +74,12 @@ static void cpu_mips_irq_request(void *opaque, int irq, int level)void cpu_mips_irq_init_cpu (MIPSCPU *cpu) {CPUMIPSState *env = &cpu->env; -qemu_irq *qi;int i; - qi =qemu_allocate_irqs (cpu_mips_irq_request, cpu,8 ); +qdev_init_gpio_in (DEVICE (cpu), cpu_mips_irq_request,8 );for (i =0 ; i <8 ; i++) { - env->irq[i] = qi[i]; + env->irq[i] =qdev_get_gpio_in (DEVICE (cpu), i); } -g_free (qi); }void cpu_mips_soft_irq (CPUMIPSState *env,int irq,int level)
Signature · 1 line
2.21.3
Re: [PATCH v2 2/3] hw/mips/mips_int: Use qdev gpio rather than qemu_allocate_irqs()
Quoted 14 lines · Philippe Mathieu-Daudé
Switch to using the qdev gpio API which is preferred over
qemu_allocate_irqs(). One step to eventually deprecate and removeqemu_allocate_irqs()one day.hw/mips/mips_int.c +0
-1@@ -74,14 +74,12 @@ static void cpu_mips_irq_request(void *opaque, int irq, int level)void cpu_mips_irq_init_cpu (MIPSCPU *cpu) {CPUMIPSState *env = &cpu->env; -qemu_irq *qi;
hw/mips/mips_int.c static void cpu_mips_irq_request(void *opaque, int irq, int level) · line 83
Quoted 10 lines
hw/mips/mips_int.c +2
-3int i; - qi =qemu_allocate_irqs (cpu_mips_irq_request, cpu,8 ); +qdev_init_gpio_in (DEVICE (cpu), cpu_mips_irq_request,8 );for (i =0 ; i <8 ; i++) { - env->irq[i] = qi[i]; + env->irq[i] =qdev_get_gpio_in (DEVICE (cpu), i); } -g_free (qi); }
Similar comments as with the openrisc patch apply here:
* ideally this code should be in target/mips/, not in hw/mips
* board code should call qdev_get_gpio_in() to get the IRQ line, rather than fishing env->irq[] out of the CPU object directly
This is a bit more complicated than with openrisc, because there's more than just a single board model, and not all MIPS boards call cpu_mips_irq_init_cpu() so figuring out whether MIPS CPUs should always provide inbound CPU lines, or only those with some particular feature, or something else, would need some investigation or MIPS knowledge. But this is an OK first step anyway, so
thanks
-- PMM
Re: [PATCH v2 2/3] hw/mips/mips_int: Use qdev gpio rather than qemu_allocate_irqs()
Quoted 29 lines · Peter Maydell
Quoted 14 lines · Philippe Mathieu-Daudé
Switch to using the qdev gpio API which is preferred over
qemu_allocate_irqs(). One step to eventually deprecate and removeqemu_allocate_irqs()one day.hw/mips/mips_int.c +0
-1@@ -74,14 +74,12 @@ static void cpu_mips_irq_request(void *opaque, int irq, int level)void cpu_mips_irq_init_cpu (MIPSCPU *cpu) {CPUMIPSState *env = &cpu->env; -qemu_irq *qi;hw/mips/mips_int.c static void cpu_mips_irq_request(void *opaque, int irq, int level) · line 83
Quoted 10 lines
hw/mips/mips_int.c +2
-3int i; - qi =qemu_allocate_irqs (cpu_mips_irq_request, cpu,8 ); +qdev_init_gpio_in (DEVICE (cpu), cpu_mips_irq_request,8 );for (i =0 ; i <8 ; i++) { - env->irq[i] = qi[i]; + env->irq[i] =qdev_get_gpio_in (DEVICE (cpu), i); } -g_free (qi); }Similar comments as with the openrisc patch apply here:
* ideally this code should be in target/mips/, not in hw/mips
* board code should callqdev_get_gpio_in()to get the IRQ
Quoted 8 lines
line, rather than fishing env->irq[] out of the CPU object directlyThis is a bit more complicated than with openrisc, because there's more than just a single board model, and not all MIPS boards call
cpu_mips_irq_init_cpu()so figuring out whether MIPS CPUs should always provide inbound CPU lines, or only those with some particular feature, or something else, would need some investigation or MIPS knowledge.
Yes, I'm aware of at least 3 different to map interrupts to a MIPS core. QEMU models at least 2.
As X86, MIPS code use old QEMU API, I don't see the codebase being upgraded anytime soon.
This is another borderline case between architecture and hardware, as the cache units, or the ARM NVIC. Ideally we should keep target/* free of references to hw/* code. In my experience it often give troubles.
Quoted 4 lines
But this is an OK first
step anyway, soReviewed-by Peter Maydell <[email protected]>
Thanks. The idea to keep qemu_allocate_irqs() as internal as possible, and have devices use the qdev GPIO API.
Quoted 4 lines
thanks
-- PMM
PATCH v2 3/3 hw/openrisc/pic_cpu: Use qdev gpio rather than qemu_allocate_irqs()
In reply to Philippe Mathieu-DaudéCoverity points out (CID 1421934) that we are leaking the memory returned by qemu_allocate_irqs(). We can avoid this leak by switching to using qdev_init_gpio_in(); the base class finalize will free the irqs that this allocates under the hood.
Patch created mechanically using spatch with this script inspired from commit d6ef883d9d7:
@@
typedef qemu_irq;
identifier irqs, handler;
expression opaque, count, i;
@@
- qemu_irq *irqs;
...
- irqs = qemu_allocate_irqs(handler, opaque, count);
+ qdev_init_gpio_in(DEVICE(opaque), handler, count);
<+...
- irqs[i]
+ qdev_get_gpio_in(DEVICE(opaque), i)
...+> ?- g_free(irqs);
--- hw/openrisc/pic_cpu.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
hw/openrisc/pic_cpu.c +2 -3
@@ -52,10 +52,9 @@ static void openrisc_pic_cpu_handler(void *opaque, int irq, int level)void cpu_openrisc_pic_init (OpenRISCCPU *cpu) {int i; -qemu_irq *qi; - qi =qemu_allocate_irqs (openrisc_pic_cpu_handler, cpu,NR_IRQS ); +qdev_init_gpio_in (DEVICE (cpu), openrisc_pic_cpu_handler,NR_IRQS );for (i =0 ; i <NR_IRQS ; i++) { - cpu->env.irq[i] = qi[i]; + cpu->env.irq[i] =qdev_get_gpio_in (DEVICE (cpu), i); } }
Signature · 1 line
2.21.3
Re: [PATCH v2 3/3] hw/openrisc/pic_cpu: Use qdev gpio rather than qemu_allocate_irqs()
Quoted 17 lines · Philippe Mathieu-Daudé
Coverity points out (CID 1421934) that we are leaking the memory returned by
qemu_allocate_irqs(). We can avoid this leak by switching to usingqdev_init_gpio_in(); the base class finalize will free the irqs that this allocates under the hood.hw/openrisc/pic_cpu.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)hw/openrisc/pic_cpu.c +0
-0@@ -52,10 +52,9 @@ static void openrisc_pic_cpu_handler(void *opaque, int irq, int level)void cpu_openrisc_pic_init (OpenRISCCPU *cpu) {
hw/openrisc/pic_cpu.c static void openrisc_pic_cpu_handler(void *opaque, int irq, int level) · line 60
Quoted 10 lines
hw/openrisc/pic_cpu.c +2
-3int i; -qemu_irq *qi; - qi =qemu_allocate_irqs (openrisc_pic_cpu_handler, cpu,NR_IRQS ); +qdev_init_gpio_in (DEVICE (cpu), openrisc_pic_cpu_handler,NR_IRQS );for (i =0 ; i <NR_IRQS ; i++) { - cpu->env.irq[i] = qi[i]; + cpu->env.irq[i] =qdev_get_gpio_in (DEVICE (cpu), i); } }
This isn't wrong as such, but it's a bit weird, because it's code outside of a device adding GPIO lines to that device, and the handler function openrisc_pic_cpu_handler() is basically doing nothing but reaching into the internals of the CPU device and changing it.
Ideally:
* all this code should be in target/openrisc/cpu.c, the same way the arm CPU creates its own inbound IRQs with qdev_init_gpio_in()
* cpu->env.irq[] should go away, and hw/openrisc/openrisc_sim.c should be calling qdev_get_gpio_in() to get each IRQ line it needs, rather than directly grabbing cpu->env.irq and then indexing into it
But this change is an OK first step and we can build the other cleanup on top of it, so
thanks
-- PMM