BBB with v5.7-rc5
Hi guys,
what's the trick to get BBB to boot recent kernels nowadays? :-p
I'm using omap2plus_defconfig without CPSW (doesn't link otherwise) with GCC 10.1.0 (I'll try an older version shortly). Cmdline is the usual root=/dev/mmcblk0p1 rootwait console=ttyS0,115200n8 (also tried ttyO0)
I get nothing on serial console. Has anyone tried a recent kernel on BBB?
Cheers
Signature · 1 line
balbi
Hi,
Quoted 4 lines · Felipe Balbi
what's the trick to get BBB to boot recent kernels nowadays? :-p
I'm using
omap2plus_defconfigwithout CPSW (doesn't link otherwise) with GCC 10.1.0 (I'll try an older version shortly). Cmdline is the usual
same result with 9.2. Nothing from low level debug either.
Signature · 1 line
balbi
Hi,
Quoted 9 lines · Felipe Balbi
Hi,
Quoted 4 lines · Felipe Balbi
what's the trick to get BBB to boot recent kernels nowadays? :-p
I'm using
omap2plus_defconfigwithout CPSW (doesn't link otherwise) with GCC 10.1.0 (I'll try an older version shortly). Cmdline is the usualsame result with 9.2. Nothing from low level debug either.
Maybe check you have a current dtb file? The older dtb files may not have all the needed data.
Also you probably want to add "earlycon" to your your kernel cmdline and then you have early output from CONFIG_SERIAL_EARLYCON=y as long as there's a chosen entry for the device uart. So no need to enable DEBUG_LL in most cases.
There's "[PATCH net v4] net: ethernet: ti: Remove TI_CPTS_MOD workaround" being discussed too for the cpsw regression.
Regards,
Tony
Felipe
Quoted 5 lines · Tony Lindgren
Hi,
Quoted 2 lines · Felipe Balbi
Hi,
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines · Felipe Balbi
what's the trick to get BBB to boot recent kernels nowadays? :-p
I'm using
omap2plus_defconfigwithout CPSW (doesn't link otherwise) with GCC 10.1.0 (I'll try an older version shortly). Cmdline is the usualsame result with 9.2. Nothing from low level debug either.
Maybe check you have a current dtb file? The older dtb files may not have all the needed data.
I have been using the latest uBoot, DTBs and kernel with no issue (except CPSW).
I have booted the BBB and a BBG. 9.2 gcc compiler
Quoted 7 lines
Also you probably want to add "earlycon" to your your kernel cmdline and then you have early output from
CONFIG_SERIAL_EARLYCON=yas long as there's a chosen entry for the device uart. So no need to enableDEBUG_LLin most cases.There's "[PATCH net v4] net: ethernet: ti: Remove
TI_CPTS_MODworkaround" being discussed too for the cpsw regression.
This is a build dependency issue.
Dan
Quoted 6 lines
Regards,
Tony
Hi Dan,
Quoted 5 lines · Dan Murphy
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines · Felipe Balbi
what's the trick to get BBB to boot recent kernels nowadays? :-p
I'm using
omap2plus_defconfigwithout CPSW (doesn't link otherwise) with GCC 10.1.0 (I'll try an older version shortly). Cmdline is the usual
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
same result with 9.2. Nothing from low level debug either.
Maybe check you have a current dtb file? The older dtb files may not have all the needed data.
I have been using the latest uBoot, DTBs and kernel with no issue (except CPSW).
I have booted the BBB and a BBG. 9.2 gcc compiler
I'll give it a shot. Maybe it's something silly I did along the way ;-)
It's been a few years since I touched ARM :-)
Signature · 1 line
balbi
Hi,
Quoted 10 lines · Tony Lindgren
Quoted 7 lines
Quoted 4 lines · Felipe Balbi
what's the trick to get BBB to boot recent kernels nowadays? :-p
I'm using
omap2plus_defconfigwithout CPSW (doesn't link otherwise) with GCC 10.1.0 (I'll try an older version shortly). Cmdline is the usualsame result with 9.2. Nothing from low level debug either.
Maybe check you have a current dtb file? The older dtb files may not have all the needed data.
yeah, loading all the data from sd card. I am, however, using the u-boot that came with the board.
Quoted 4 lines
Also you probably want to add "earlycon" to your your kernel cmdline and then you have early output from
CONFIG_SERIAL_EARLYCON=yas long as there's a chosen entry for the device uart. So no need to enableDEBUG_LLin most cases.
cool, I'll try earlycon, then.
Quoted 2 lines
There's "[PATCH net v4] net: ethernet: ti: Remove
TI_CPTS_MODworkaround" being discussed too for the cpsw regression.
Thanks
Signature · 1 line
balbi
Hi,
Quoted 7 lines · Felipe Balbi
Quoted 6 lines · Tony Lindgren
Quoted 6 lines
Quoted 4 lines · Felipe Balbi
what's the trick to get BBB to boot recent kernels nowadays? :-p
I'm using
omap2plus_defconfigwithout CPSW (doesn't link otherwise) with GCC 10.1.0 (I'll try an older version shortly). Cmdline is the usual
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
same result with 9.2. Nothing from low level debug either.
Maybe check you have a current dtb file? The older dtb files may not have all the needed data.
yeah, loading all the data from sd card. I am, however, using the u-boot that came with the board.
All sorted out, thanks for the tips ;-)
Signature · 1 line
balbi