Skip to contentSkip to conversation

bus: mhi: core: Handle syserr during power_up

PATCH In review Jeffrey Hugo 3 participants 3 messages May 7, 2020 – May 14, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 bus: mhi: core: Handle syserr during power_up

The MHI device may be in the syserr state when we attempt to init it in power_up(). Since we have no local state, the handling is simple - reset the device and wait for it to transition out of the reset state.

---

v4:
-Implemented Hemant's suggested solution from v2. The spec will be amended to indicate the intvec interrupt will be triggered for the reset state change which matches the current implementations and enables Hemant's solution to be used, which is cleaner.

 drivers/bus/mhi/core/pm.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
drivers/bus/mhi/core/pm.c +27 -0
index dc83d65..ddef693 100644
@@ -760,6 +760,7 @@ static void mhi_deassert_dev_wake(struct mhi_controller *mhi_cntrl,
 
 int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 {
+	enum mhi_state state;
 	enum mhi_ee_type current_ee;
 	enum dev_st_transition next_state;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
@@ -829,6 +830,32 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 		goto error_bhi_offset;
 	}
 
+	state = mhi_get_mhi_state(mhi_cntrl);
+	if (state == MHI_STATE_SYS_ERR) {
+		mhi_set_mhi_state(mhi_cntrl, MHI_STATE_RESET);
+		ret = wait_event_timeout(mhi_cntrl->state_event,
+				MHI_PM_IN_FATAL_STATE(mhi_cntrl->pm_state) ||
+					mhi_read_reg_field(mhi_cntrl,
+							   mhi_cntrl->regs,
+							   MHICTRL,
+							   MHICTRL_RESET_MASK,
+							   MHICTRL_RESET_SHIFT,
+							   &val) ||
+					!val,
+				msecs_to_jiffies(mhi_cntrl->timeout_ms));
+		if (ret) {
+			ret = -EIO;
+			dev_info(dev, "Failed to reset MHI due to syserr state\n");
+			goto error_bhi_offset;
+		}
+
+		/*
+		 * device cleares INTVEC as part of RESET processing,
+		 * re-program it
+		 */
+		mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
+	}
+
 	/* Transition to next state */
 	next_state = MHI_IN_PBL(current_ee) ?
 		DEV_ST_TRANSITION_PBL : DEV_ST_TRANSITION_READY;
Signature · 2 lines
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
Reviewed-by on v4 1/1
#2 lore raw
In reply to Jeffrey Hugo
Quoted 5 lines · Jeffrey Hugo

The MHI device may be in the syserr state when we attempt to init it in power_up(). Since we have no local state, the handling is simple - reset the device and wait for it to transition out of the reset state.

Will apply this patch to mhi-next and include in the 5.8 series.

Thanks,
Mani

Quoted 59 lines

---

v4:
-Implemented Hemant's suggested solution from v2. The spec will be amended to indicate the intvec interrupt will be triggered for the reset state change which matches the current implementations and enables Hemant's solution to be used, which is cleaner.

 drivers/bus/mhi/core/pm.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
drivers/bus/mhi/core/pm.c +27 -0
index dc83d65..ddef693 100644
@@ -760,6 +760,7 @@ static void mhi_deassert_dev_wake(struct mhi_controller *mhi_cntrl,
 
 int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 {
+	enum mhi_state state;
 	enum mhi_ee_type current_ee;
 	enum dev_st_transition next_state;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
@@ -829,6 +830,32 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 		goto error_bhi_offset;
 	}
 
+	state = mhi_get_mhi_state(mhi_cntrl);
+	if (state == MHI_STATE_SYS_ERR) {
+		mhi_set_mhi_state(mhi_cntrl, MHI_STATE_RESET);
+		ret = wait_event_timeout(mhi_cntrl->state_event,
+				MHI_PM_IN_FATAL_STATE(mhi_cntrl->pm_state) ||
+					mhi_read_reg_field(mhi_cntrl,
+							   mhi_cntrl->regs,
+							   MHICTRL,
+							   MHICTRL_RESET_MASK,
+							   MHICTRL_RESET_SHIFT,
+							   &val) ||
+					!val,
+				msecs_to_jiffies(mhi_cntrl->timeout_ms));
+		if (ret) {
+			ret = -EIO;
+			dev_info(dev, "Failed to reset MHI due to syserr state\n");
+			goto error_bhi_offset;
+		}
+
+		/*
+		 * device cleares INTVEC as part of RESET processing,
+		 * re-program it
+		 */
+		mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
+	}
+
 	/* Transition to next state */
 	next_state = MHI_IN_PBL(current_ee) ?
 		DEV_ST_TRANSITION_PBL : DEV_ST_TRANSITION_READY;
Signature · 2 lines
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.