ARM: dts: at91: Configure SCL gpio of i2c2 node as open drain
Subsystems (3)
PATCH 1/1 ARM: dts: at91: Configure SCL gpio of i2c2 node as open drain
The SCL gpio pin of i2c2 node used for recovery needs to be configured as open drain.
Fixes 455fec938bbb ("ARM: dts: at91: sama5d2: add i2c gpio pinctrl")
Signed-off-by Codrin Ciubotariu <[email protected]>
--- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/at91-sama5d2_xplained.dts +1 -1
@@ -344,7 +344,7 @@ i2c2: i2c@600 { pinctrl-0 = <&pinctrl_flx0_default>; pinctrl-1 = <&pinctrl_i2c2_gpio>; sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-sda-hold-time-ns = <350>; i2c-analog-filter; i2c-digital-filter;
Signature · 1 line
2.25.1
Alexandre Belloni
maintainerQuoted 9 lines · Codrin Ciubotariu
The SCL gpio pin of i2c2 node used for recovery needs to be configured as open drain.
Fixes 455fec938bbb ("ARM: dts: at91: sama5d2: add i2c gpio pinctrl")Signed-off-by Codrin Ciubotariu <[email protected]>--- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Squashed in the previous one, thanks.
Quoted 16 lines
arch/arm/boot/dts/at91-sama5d2_xplained.dts +1
-1@@ -344,7 +344,7 @@ i2c2: i2c@600 { pinctrl-0 = <&pinctrl_flx0_default>; pinctrl-1 = <&pinctrl_i2c2_gpio>; sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; - scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-sda-hold-time-ns = <350>; i2c-analog-filter; i2c-digital-filter;Signature · 1 line
2.25.1
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com