Skip to contentSkip to conversation

lib: rsa: avoid overriding the object name when already specified

PATCH New Bastian Krause 3 participants 3 messages May 13, 2020 – May 15, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 lib: rsa: avoid overriding the object name when already specified

From: Jan Luebbe <[email protected]>

If "object=" is specified in "keydir" when using the pkcs11 engine do not append another "object=<key-name-hint>". This makes it possible to use object names other than the key name hint. These two string identifiers are not necessarily equal.

---
Note: we could also check if keydir starts with "pkcs11:" and append ";type=public|private". That would allow passing complete PKCS#11 URIs which is somewhat nicer.

---
 doc/uImage.FIT/signature.txt |  8 +++++---
 lib/rsa/rsa-sign.c           | 22 ++++++++++++++++------
 2 files changed, 21 insertions(+), 9 deletions(-)
doc/uImage.FIT/signature.txt +5 -3
index 3591225a6e..d4afd755e9 100644
@@ -481,12 +481,14 @@ openssl. This may require setting up LD_LIBRARY_PATH if engine is not installed
 to openssl's default search paths.
 
 PKCS11 engine support forms "key id" based on "keydir" and with
-"key-name-hint". "key-name-hint" is used as "object" name and "keydir" if
-defined is used to define (prefix for) which PKCS11 source is being used for
-lookup up for the key.
+"key-name-hint". "key-name-hint" is used as "object" name (if not defined in
+keydir). "keydir" (if defined) is used to define (prefix for) which PKCS11 source
+is being used for lookup up for the key.
 
 PKCS11 engine key ids:
    "pkcs11:<keydir>;object=<key-name-hint>;type=<public|private>"
+or, if keydir contains "object="
+   "pkcs11:<keydir>;type=<public|private>"
 or
    "pkcs11:object=<key-name-hint>;type=<public|private>",
 
lib/rsa/rsa-sign.c +16 -6
index 580c744709..1914b96413 100644
@@ -135,9 +135,14 @@ static int rsa_engine_get_pub_key(const char *keydir, const char *name,
 
 	if (engine_id && !strcmp(engine_id, "pkcs11")) {
 		if (keydir)
-			snprintf(key_id, sizeof(key_id),
-				 "pkcs11:%s;object=%s;type=public",
-				 keydir, name);
+			if (strstr(keydir, "object="))
+				snprintf(key_id, sizeof(key_id),
+					 "pkcs11:%s;type=public",
+					 keydir);
+			else
+				snprintf(key_id, sizeof(key_id),
+					 "pkcs11:%s;object=%s;type=public",
+					 keydir, name);
 		else
 			snprintf(key_id, sizeof(key_id),
 				 "pkcs11:object=%s;type=public",
@@ -255,9 +260,14 @@ static int rsa_engine_get_priv_key(const char *keydir, const char *name,
 
 	if (engine_id && !strcmp(engine_id, "pkcs11")) {
 		if (keydir)
-			snprintf(key_id, sizeof(key_id),
-				 "pkcs11:%s;object=%s;type=private",
-				 keydir, name);
+			if (strstr(keydir, "object="))
+				snprintf(key_id, sizeof(key_id),
+					 "pkcs11:%s;type=private",
+					 keydir);
+			else
+				snprintf(key_id, sizeof(key_id),
+					 "pkcs11:%s;object=%s;type=private",
+					 keydir, name);
 		else
 			snprintf(key_id, sizeof(key_id),
 				 "pkcs11:object=%s;type=private",
Signature · 1 line
2.26.2
#1 lore raw

PATCH 1/1 lib: rsa: avoid overriding the object name when already specified

Quoted 10 lines · Bastian Krause

From: Jan Luebbe <[email protected]>

If "object=" is specified in "keydir" when using the pkcs11 engine do not append another "object=<key-name-hint>". This makes it possible to use object names other than the key name hint. These two string identifiers are not necessarily equal.

Looks good to me.

Quoted 74 lines

---
Note: we could also check if keydir starts with "pkcs11:" and append ";type=public|private". That would allow passing complete PKCS#11 URIs which is somewhat nicer.

---
 doc/uImage.FIT/signature.txt |  8 +++++---
 lib/rsa/rsa-sign.c           | 22 ++++++++++++++++------
 2 files changed, 21 insertions(+), 9 deletions(-)
doc/uImage.FIT/signature.txt +5 -3
index 3591225a6e..d4afd755e9 100644
@@ -481,12 +481,14 @@ openssl. This may require setting up LD_LIBRARY_PATH if engine is not installed
 to openssl's default search paths.
 
 PKCS11 engine support forms "key id" based on "keydir" and with
-"key-name-hint". "key-name-hint" is used as "object" name and "keydir" if
-defined is used to define (prefix for) which PKCS11 source is being used for
-lookup up for the key.
+"key-name-hint". "key-name-hint" is used as "object" name (if not defined in
+keydir). "keydir" (if defined) is used to define (prefix for) which PKCS11 source
+is being used for lookup up for the key.
 
 PKCS11 engine key ids:
    "pkcs11:<keydir>;object=<key-name-hint>;type=<public|private>"
+or, if keydir contains "object="
+   "pkcs11:<keydir>;type=<public|private>"
 or
    "pkcs11:object=<key-name-hint>;type=<public|private>",
 
lib/rsa/rsa-sign.c +16 -7
index 580c744709..1914b96413 100644
@@ -135,9 +135,14 @@ static int rsa_engine_get_pub_key(const char *keydir, const char *name,
 
        if (engine_id && !strcmp(engine_id, "pkcs11")) {
                if (keydir)
-                       snprintf(key_id, sizeof(key_id),
-                                "pkcs11:%s;object=%s;type=public",
-                                keydir, name);
+                       if (strstr(keydir, "object="))
+                               snprintf(key_id, sizeof(key_id),
+                                        "pkcs11:%s;type=public",
+                                        keydir);
+                       else
+                               snprintf(key_id, sizeof(key_id),
+                                        "pkcs11:%s;object=%s;type=public",
+                                        keydir, name);
                else
                        snprintf(key_id, sizeof(key_id),
                                 "pkcs11:object=%s;type=public",
@@ -255,9 +260,14 @@ static int rsa_engine_get_priv_key(const char *keydir, const char *name,
 
        if (engine_id && !strcmp(engine_id, "pkcs11")) {
                if (keydir)
-                       snprintf(key_id, sizeof(key_id),
-                                "pkcs11:%s;object=%s;type=private",
-                                keydir, name);
+                       if (strstr(keydir, "object="))
+                               snprintf(key_id, sizeof(key_id),
+                                        "pkcs11:%s;type=private",
+                                        keydir);
+                       else
+                               snprintf(key_id, sizeof(key_id),
+                                        "pkcs11:%s;object=%s;type=private",
+                                        keydir, name);
                else
                        snprintf(key_id, sizeof(key_id),
                                 "pkcs11:object=%s;type=private",
--

2.26.2

#2 lore raw

PATCH 1/1 lib: rsa: avoid overriding the object name when already specified

In reply to Bastian Krause
Quoted 10 lines · Bastian Krause

From: Jan Luebbe <[email protected]>

If "object=" is specified in "keydir" when using the pkcs11 engine do not append another "object=<key-name-hint>". This makes it possible to use object names other than the key name hint. These two string identifiers are not necessarily equal.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200515/f2ac7af7/attachment.sig>