Skip to contentSkip to conversation

arm64: dts: qcom: sdm845-mtp: enable IPA

PATCH Superseded Alex Elder 2 participants 3 messages May 18, 2020 – May 19, 2020

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Alex Elder

author
#0 lore raw

PATCH 1/1 arm64: dts: qcom: sdm845-mtp: enable IPA

Enable IPA on the SDM845 MTP.

---
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/qcom/sdm845-mtp.dts +5 -0
index 1372fe8601f5..2f942daeb9d1 100644
@@ -448,6 +448,11 @@
 	clock-frequency = <400000>;
 };
 
+&ipa {
+	status = "okay";
+	modem-init;
+};
+
 &mdss {
 	status = "okay";
 };
Signature · 1 line
2.20.1
#1 lore raw
Quoted 12 lines · Alex Elder

Enable IPA on the SDM845 MTP.

---
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/qcom/sdm845-mtp.dts +0 -0
index 1372fe8601f5..2f942daeb9d1 100644

arch/arm64/boot/dts/qcom/sdm845-mtp.dts line 453

Quoted 6 lines
arch/arm64/boot/dts/qcom/sdm845-mtp.dts +3 -0
@@ -448,6 +448,11 @@
 	clock-frequency = <400000>;
 };
 
+&ipa {
+	status = "okay";
+	modem-init;

modem-init tells the IPA driver that the modem will load the ipa_fws firmware, but the MTP is assumed to run "LA" firmware where it's the Linux-side's job to do this.

Regards,
Bjorn

Quoted 8 lines
arch/arm64/boot/dts/qcom/sdm845-mtp.dts +2 -0
+};
+
 &mdss {
 	status = "okay";
 };
Signature · 1 line
2.20.1
author
#2 lore raw
Quoted 3 lines · Bjorn Andersson

modem-init tells the IPA driver that the modem will load the ipa_fws firmware, but the MTP is assumed to run "LA" firmware where it's the Linux-side's job to do this.

I didn't see this message until just now, but I remembered that last night. I just build my version 2 and will send it shortly. Sorry about that.

-Alex