Skip to contentSkip to conversation

Implement reentrant rtas call

PATCH Applied Leonardo Bras 2 participants 4 messages May 18, 2020 – Jun 9, 2020 PowerPC

lore
Share & tools
lore
#0 lore raw

v6 cover Implement reentrant rtas call

Patch 2 implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive", according to LoPAPR Version 1.1 (March 24, 2016).

For that, it's necessary that every call uses a different rtas buffer (rtas_args). Paul Mackerras suggested using the PACA structure for creating a per-cpu buffer for these calls.

Patch 1 was necessary to make PACA have a 'struct rtas_args' member.

Reentrant rtas calls can be useful to avoid deadlocks in crashing, where rtas-calls are needed, but some other thread crashed holding the rtas.lock.

This is a backtrace of a deadlock from a kdump testing environment:

#0 arch_spin_lock

  #1  lock_rtas () 
  #2  rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
  #3  ics_rtas_mask_real_irq (hw_irq=4100) 
  #4  machine_kexec_mask_interrupts
  #5  default_machine_crash_shutdown
  #6  machine_crash_shutdown 
  #7  __crash_kexec
  #8  crash_kexec
  #9  oops_end

Special thanks to Nick Piggin, who have been helping me a lot with this series!

---
Changes since v5:
- Renames new paca member from reentrant_args to rtas_args_reentrant
- Compile out rtas_args_reentrant if CONFIG_PPC_RTAS=n
- new_rtas_args() is skipped (returns NULL) if CPU_FTR_HVMODE

Changes since v4:
- Insted of having the full buffer on PACA, adds only a pointer and allocate it during allocate_paca(), making sure it's in a memory range available for RTAS (32-bit). (Thanks Nick Piggin!)

Changes since v3:
- Adds protection from preemption and interruption

Changes since v2:
- Fixed build failure from ppc64e, by including spinlock_types.h on rtas-types.h
- Improved commit messages

Changes since v1:
- Moved buffer from stack to PACA (as suggested by Paul Mackerras)
- Added missing output bits
- Improve documentation following kernel-doc format (as suggested by Nathan Lynch)

Leonardo Bras (2):
powerpc/rtas: Move type/struct definitions from rtas.h into
rtas-types.h
powerpc/rtas: Implement reentrant rtas call

 arch/powerpc/include/asm/paca.h       |   2 +
 arch/powerpc/include/asm/rtas-types.h | 126 ++++++++++++++++++++++++++
 arch/powerpc/include/asm/rtas.h       | 119 +-----------------------
 arch/powerpc/kernel/rtas.c            |  42 +++++++++
 arch/powerpc/sysdev/xics/ics-rtas.c   |  22 ++---
 5 files changed, 183 insertions(+), 128 deletions(-)
 create mode 100644 arch/powerpc/include/asm/rtas-types.h
Signature · 1 line
2.25.4
#1 lore raw

PATCH v6 1/2 powerpc/rtas: Move type/struct definitions from rtas.h into rtas-types.h

In order to get any rtas* struct into other headers, including rtas.h may cause a lot of errors, regarding include dependency needed for inline functions.

Create rtas-types.h and move there all type/struct definitions from rtas.h, then include rtas-types.h into rtas.h.

Also, as suggested by checkpath.pl, replace uint8_t for u8, and keep the same type pattern for the whole file, as they are the same according to powerpc/boot/types.h.

---
 arch/powerpc/include/asm/rtas-types.h | 126 ++++++++++++++++++++++++++
 arch/powerpc/include/asm/rtas.h       | 118 +-----------------------
 2 files changed, 127 insertions(+), 117 deletions(-)
 create mode 100644 arch/powerpc/include/asm/rtas-types.h
arch/powerpc/include/asm/rtas-types.h new file +126 -0
new file mode 100644
index 000000000000..87354e28f160
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _POWERPC_RTAS_TYPES_H
+#define _POWERPC_RTAS_TYPES_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock_types.h>
+
+typedef __be32 rtas_arg_t;
+
+struct rtas_args {
+	__be32 token;
+	__be32 nargs;
+	__be32 nret;
+	rtas_arg_t args[16];
+	rtas_arg_t *rets;     /* Pointer to return values in args[]. */
+};
+
+struct rtas_t {
+	unsigned long entry;		/* physical address pointer */
+	unsigned long base;		/* physical address pointer */
+	unsigned long size;
+	arch_spinlock_t lock;
+	struct rtas_args args;
+	struct device_node *dev;	/* virtual address pointer */
+};
+
+struct rtas_suspend_me_data {
+	atomic_t working; /* number of cpus accessing this struct */
+	atomic_t done;
+	int token; /* ibm,suspend-me */
+	atomic_t error;
+	struct completion *complete; /* wait on this until working == 0 */
+};
+
+struct rtas_error_log {
+	/* Byte 0 */
+	u8		byte0;			/* Architectural version */
+
+	/* Byte 1 */
+	u8		byte1;
+	/* XXXXXXXX
+	 * XXX		3: Severity level of error
+	 *    XX	2: Degree of recovery
+	 *      X	1: Extended log present?
+	 *       XX	2: Reserved
+	 */
+
+	/* Byte 2 */
+	u8		byte2;
+	/* XXXXXXXX
+	 * XXXX		4: Initiator of event
+	 *     XXXX	4: Target of failed operation
+	 */
+	u8		byte3;			/* General event or error*/
+	__be32		extended_log_length;	/* length in bytes */
+	unsigned char	buffer[1];		/* Start of extended log */
+						/* Variable length.      */
+};
+
+/* RTAS general extended event log, Version 6. The extended log starts
+ * from "buffer" field of struct rtas_error_log defined above.
+ */
+struct rtas_ext_event_log_v6 {
+	/* Byte 0 */
+	u8 byte0;
+	/* XXXXXXXX
+	 * X		1: Log valid
+	 *  X		1: Unrecoverable error
+	 *   X		1: Recoverable (correctable or successfully retried)
+	 *    X		1: Bypassed unrecoverable error (degraded operation)
+	 *     X	1: Predictive error
+	 *      X	1: "New" log (always 1 for data returned from RTAS)
+	 *       X	1: Big Endian
+	 *        X	1: Reserved
+	 */
+
+	/* Byte 1 */
+	u8 byte1;			/* reserved */
+
+	/* Byte 2 */
+	u8 byte2;
+	/* XXXXXXXX
+	 * X		1: Set to 1 (indicating log is in PowerPC format)
+	 *  XXX		3: Reserved
+	 *     XXXX	4: Log format used for bytes 12-2047
+	 */
+
+	/* Byte 3 */
+	u8 byte3;			/* reserved */
+	/* Byte 4-11 */
+	u8 reserved[8];			/* reserved */
+	/* Byte 12-15 */
+	__be32  company_id;		/* Company ID of the company	*/
+					/* that defines the format for	*/
+					/* the vendor specific log type	*/
+	/* Byte 16-end of log */
+	u8 vendor_log[1];		/* Start of vendor specific log	*/
+					/* Variable length.		*/
+};
+
+/* Vendor specific Platform Event Log Format, Version 6, section header */
+struct pseries_errorlog {
+	__be16 id;			/* 0x00 2-byte ASCII section ID	*/
+	__be16 length;			/* 0x02 Section length in bytes	*/
+	u8 version;			/* 0x04 Section version		*/
+	u8 subtype;			/* 0x05 Section subtype		*/
+	__be16 creator_component;	/* 0x06 Creator component ID	*/
+	u8 data[];			/* 0x08 Start of section data	*/
+};
+
+/* RTAS pseries hotplug errorlog section */
+struct pseries_hp_errorlog {
+	u8	resource;
+	u8	action;
+	u8	id_type;
+	u8	reserved;
+	union {
+		__be32	drc_index;
+		__be32	drc_count;
+		struct { __be32 count, index; } ic;
+		char	drc_name[1];
+	} _drc_u;
+};
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_RTAS_TYPES_H */
arch/powerpc/include/asm/rtas.h +1 -117

154 lines not on this page · raw message

Signature · 1 line
2.25.4
#2 lore raw

PATCH v6 2/2 powerpc/rtas: Implement reentrant rtas call

In reply to Leonardo Bras

Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive".

On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4, items 2 and 3 say:

2 - For the PowerPC External Interrupt option: The * call must be reentrant to the number of processors on the platform. 3 - For the PowerPC External Interrupt option: The * argument call buffer for each simultaneous call must be physically unique.

So, these rtas-calls can be called in a lockless way, if using a different buffer for each cpu doing such rtas call.

For this, it was suggested to add the buffer (struct rtas_args) in the PACA struct, so each cpu can have it's own buffer. The PACA struct received a pointer to rtas buffer, which is allocated in the memory range available to rtas 32-bit.

Reentrant rtas calls are useful to avoid deadlocks in crashing, where rtas-calls are needed, but some other thread crashed holding the rtas.lock.

This is a backtrace of a deadlock from a kdump testing environment:

#0 arch_spin_lock

  #1  lock_rtas ()
  #2  rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
  #3  ics_rtas_mask_real_irq (hw_irq=4100)
  #4  machine_kexec_mask_interrupts
  #5  default_machine_crash_shutdown
  #6  machine_crash_shutdown
  #7  __crash_kexec
  #8  crash_kexec
  #9  oops_end
---
 arch/powerpc/include/asm/paca.h     |  4 +++
 arch/powerpc/include/asm/rtas.h     |  1 +
 arch/powerpc/kernel/paca.c          | 34 +++++++++++++++++++
 arch/powerpc/kernel/rtas.c          | 52 +++++++++++++++++++++++++++++
 arch/powerpc/sysdev/xics/ics-rtas.c | 22 ++++++------
 5 files changed, 102 insertions(+), 11 deletions(-)
arch/powerpc/include/asm/paca.h +4 -0
index e3cc9eb9204d..1e2d45f3f84c 100644
@@ -29,6 +29,7 @@
 #include <asm/hmi.h>
 #include <asm/cpuidle.h>
 #include <asm/atomic.h>
+#include <asm/rtas-types.h>
 
 #include <asm-generic/mmiowb_types.h>
 
@@ -270,6 +271,9 @@ struct paca_struct {
 #ifdef CONFIG_MMIOWB
 	struct mmiowb_state mmiowb_state;
 #endif
+#ifdef CONFIG_PPC_RTAS
+	struct rtas_args *rtas_args_reentrant;
+#endif /* CONFIG_PPC_RTAS */
 } ____cacheline_aligned;
 
 extern void copy_mm_to_paca(struct mm_struct *mm);
arch/powerpc/include/asm/rtas.h +1 -0
index c35c5350b7e4..fa7509c85881 100644
@@ -236,6 +236,7 @@ extern struct rtas_t rtas;
 extern int rtas_token(const char *service);
 extern int rtas_service_present(const char *service);
 extern int rtas_call(int token, int, int, int *, ...);
+int rtas_call_reentrant(int token, int nargs, int nret, int *outputs, ...);
 void rtas_call_unlocked(struct rtas_args *args, int token, int nargs,
 			int nret, ...);
 extern void __noreturn rtas_restart(char *cmd);
arch/powerpc/kernel/paca.c +34 -0
index 3f91ccaa9c74..04855ad455c7 100644
@@ -16,6 +16,7 @@
 #include <asm/kexec.h>
 #include <asm/svm.h>
 #include <asm/ultravisor.h>
+#include <asm/rtas.h>
 
 #include "setup.h"
 
@@ -164,6 +165,32 @@ static struct slb_shadow * __init new_slb_shadow(int cpu, unsigned long limit)
 
 #endif /* CONFIG_PPC_BOOK3S_64 */
 
+#ifdef CONFIG_PPC_RTAS
+
+/**
+ * new_rtas_args() - Allocates rtas args
+ * @cpu:	CPU number
+ * @limit:	Memory limit for this allocation
+ *
+ * Allocates a struct rtas_args and return it's pointer,
+ * if not in Hypervisor mode
+ *
+ * Return:	Pointer to allocated rtas_args
+ *		NULL if CPU in Hypervisor Mode
+ */
+static struct rtas_args * __init new_rtas_args(int cpu, unsigned long limit)
+{
+	limit = min_t(unsigned long, limit, RTAS_INSTANTIATE_MAX);
+
+	if (early_cpu_has_feature(CPU_FTR_HVMODE))
+		return NULL;
+
+	return alloc_paca_data(sizeof(struct rtas_args), L1_CACHE_BYTES,
+			       limit, cpu);
+}
+
+#endif /*CONFIG_PPC_RTAS*/
+
 /* The Paca is an array with one entry per processor.  Each contains an
  * lppaca, which contains the information shared between the
  * hypervisor and Linux.
@@ -202,6 +229,10 @@ void __init __nostackprotector initialise_paca(struct paca_struct *new_paca, int
 	/* For now -- if we have threads this will be adjusted later */
 	new_paca->tcd_ptr = &new_paca->tcd;
 #endif
+
+#ifdef CONFIG_PPC_RTAS
+	new_paca->rtas_args_reentrant = NULL;
+#endif
 }
 
 /* Put the paca pointer into r13 and SPRG_PACA */
@@ -273,6 +304,9 @@ void __init allocate_paca(int cpu)
 #endif
 #ifdef CONFIG_PPC_BOOK3S_64
 	paca->slb_shadow_ptr = new_slb_shadow(cpu, limit);
+#endif
+#ifdef CONFIG_PPC_RTAS
+	paca->rtas_args_reentrant = new_rtas_args(cpu, limit);
 #endif
 	paca_struct_size += sizeof(struct paca_struct);
 }
arch/powerpc/kernel/rtas.c +52 -0

64 lines not on this page · raw message

arch/powerpc/sysdev/xics/ics-rtas.c +11 -11
index 6aabc74688a6..4cf18000f07c 100644
@@ -50,8 +50,8 @@ static void ics_rtas_unmask_irq(struct irq_data *d)
 
 	server = xics_get_irq_server(d->irq, irq_data_get_affinity_mask(d), 0);
 
-	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hw_irq, server,
-				DEFAULT_PRIORITY);
+	call_status = rtas_call_reentrant(ibm_set_xive, 3, 1, NULL, hw_irq,
+					  server, DEFAULT_PRIORITY);
 	if (call_status != 0) {
 		printk(KERN_ERR
 			"%s: ibm_set_xive irq %u server %x returned %d\n",
@@ -60,7 +60,7 @@ static void ics_rtas_unmask_irq(struct irq_data *d)
 	}
 
 	/* Now unmask the interrupt (often a no-op) */
-	call_status = rtas_call(ibm_int_on, 1, 1, NULL, hw_irq);
+	call_status = rtas_call_reentrant(ibm_int_on, 1, 1, NULL, hw_irq);
 	if (call_status != 0) {
 		printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
 			__func__, hw_irq, call_status);
@@ -91,7 +91,7 @@ static void ics_rtas_mask_real_irq(unsigned int hw_irq)
 	if (hw_irq == XICS_IPI)
 		return;
 
-	call_status = rtas_call(ibm_int_off, 1, 1, NULL, hw_irq);
+	call_status = rtas_call_reentrant(ibm_int_off, 1, 1, NULL, hw_irq);
 	if (call_status != 0) {
 		printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
 			__func__, hw_irq, call_status);
@@ -99,8 +99,8 @@ static void ics_rtas_mask_real_irq(unsigned int hw_irq)
 	}
 
 	/* Have to set XIVE to 0xff to be able to remove a slot */
-	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hw_irq,
-				xics_default_server, 0xff);
+	call_status = rtas_call_reentrant(ibm_set_xive, 3, 1, NULL, hw_irq,
+					  xics_default_server, 0xff);
 	if (call_status != 0) {
 		printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
 			__func__, hw_irq, call_status);
@@ -131,7 +131,7 @@ static int ics_rtas_set_affinity(struct irq_data *d,
 	if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
 		return -1;
 
-	status = rtas_call(ibm_get_xive, 1, 3, xics_status, hw_irq);
+	status = rtas_call_reentrant(ibm_get_xive, 1, 3, xics_status, hw_irq);
 
 	if (status) {
 		printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
@@ -146,8 +146,8 @@ static int ics_rtas_set_affinity(struct irq_data *d,
 		return -1;
 	}
 
-	status = rtas_call(ibm_set_xive, 3, 1, NULL,
-			   hw_irq, irq_server, xics_status[1]);
+	status = rtas_call_reentrant(ibm_set_xive, 3, 1, NULL,
+				     hw_irq, irq_server, xics_status[1]);
 
 	if (status) {
 		printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
@@ -179,7 +179,7 @@ static int ics_rtas_map(struct ics *ics, unsigned int virq)
 		return -EINVAL;
 
 	/* Check if RTAS knows about this interrupt */
-	rc = rtas_call(ibm_get_xive, 1, 3, status, hw_irq);
+	rc = rtas_call_reentrant(ibm_get_xive, 1, 3, status, hw_irq);
 	if (rc)
 		return -ENXIO;
 
@@ -198,7 +198,7 @@ static long ics_rtas_get_server(struct ics *ics, unsigned long vec)
 {
 	int rc, status[2];
 
-	rc = rtas_call(ibm_get_xive, 1, 3, status, vec);
+	rc = rtas_call_reentrant(ibm_get_xive, 1, 3, status, vec);
 	if (rc)
 		return -1;
 	return status[0];
Signature · 1 line
2.25.4
#3 lore raw
In reply to Leonardo Bras
Quoted 9 lines · Leonardo Bras

Patch 2 implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive", according to LoPAPR Version 1.1 (March 24, 2016).

For that, it's necessary that every call uses a different rtas buffer (rtas_args). Paul Mackerras suggested using the PACA structure for creating a per-cpu buffer for these calls.

[...]

Applied to powerpc/next.

[1/2] powerpc/rtas: Move type/struct definitions from rtas.h into rtas-types.h

      https://git.kernel.org/powerpc/c/783a015b747f606e803b798eb8b50c73c548691d
[2/2] powerpc/rtas: Implement reentrant rtas call
      https://git.kernel.org/powerpc/c/b664db8e3f976d9233cc9ea5e3f8a8c0bcabeb48

cheers