amlogic: Remove ARCH= references from documentation
Subsystems (3)
PATCH 1/7 amlogic: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline.
---
As an aside, these files should be converted rST and moved to doc/board/ and the MAINTAINERS file updated to include the new documentation file too. Thanks!
--- board/amlogic/p200/README.nanopi-k2 | 1 - board/amlogic/p200/README.odroid-c2 | 1 - board/amlogic/p200/README.p200 | 1 - board/amlogic/p201/README.p201 | 1 - board/amlogic/p212/README.khadas-vim | 1 - board/amlogic/p212/README.libretech-ac | 1 - board/amlogic/p212/README.libretech-cc | 1 - board/amlogic/p212/README.p212 | 1 - board/amlogic/q200/README.khadas-vim2 | 1 - board/amlogic/q200/README.q200 | 1 - board/amlogic/s400/README | 1 - board/amlogic/sei510/README | 1 - board/amlogic/sei610/README | 1 - board/amlogic/u200/README | 1 - board/amlogic/w400/README.khadas-vim3 | 1 - board/amlogic/w400/README.khadas-vim3l | 1 - board/amlogic/w400/README.odroid-n2 | 1 - board/amlogic/w400/README.w400 | 1 - 18 files changed, 18 deletions(-)
board/amlogic/p200/README.nanopi-k2 +0 -1
@@ -24,7 +24,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make nanopi-k2_defconfig > make
board/amlogic/p200/README.odroid-c2 +0 -1
@@ -29,7 +29,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make odroid-c2_defconfig > make
board/amlogic/p200/README.p200 +0 -1
@@ -31,7 +31,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make p200_defconfig > make
board/amlogic/p201/README.p201 +0 -1
@@ -31,7 +31,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make p201_defconfig > make
board/amlogic/p212/README.khadas-vim +0 -1
@@ -30,7 +30,6 @@ Currently the u-boot port supports the following devices: U-Boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make khadas-vim_defconfig > make
board/amlogic/p212/README.libretech-ac +0 -1
@@ -25,7 +25,6 @@ Currently the U-Boot port supports the following devices: U-Boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make libretech-ac_defconfig > make
board/amlogic/p212/README.libretech-cc +0 -1
@@ -30,7 +30,6 @@ Currently the U-Boot port supports the following devices: U-Boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make libretech-cc_defconfig > make
board/amlogic/p212/README.p212 +0 -1
@@ -31,7 +31,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make p212_defconfig > make
board/amlogic/q200/README.khadas-vim2 +0 -1
@@ -31,7 +31,6 @@ Currently the u-boot port supports the following devices: U-Boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make khadas-vim2_defconfig > make
board/amlogic/q200/README.q200 +0 -1
@@ -30,7 +30,6 @@ Currently the u-boot port supports the following devices: U-Boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make khadas-vim2_defconfig > make
board/amlogic/s400/README +0 -1
@@ -31,7 +31,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make s400_defconfig > make
board/amlogic/sei510/README +0 -1
@@ -22,7 +22,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make sei510_defconfig > make
board/amlogic/sei610/README +0 -1
@@ -18,7 +18,6 @@ specifications: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make sei610_defconfig > make
board/amlogic/u200/README +0 -1
@@ -27,7 +27,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make u200_defconfig > make
board/amlogic/w400/README.khadas-vim3 +0 -1
@@ -29,7 +29,6 @@ Currently the U-Boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make khadas-vim3_defconfig > make
board/amlogic/w400/README.khadas-vim3l +0 -1
@@ -29,7 +29,6 @@ Currently the U-Boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make khadas-vim3l_defconfig > make
board/amlogic/w400/README.odroid-n2 +0 -1
@@ -28,7 +28,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make odroid-n2_defconfig > make
board/amlogic/w400/README.w400 +0 -1
@@ -27,7 +27,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make w400_defconfig > make
Signature · 1 line
2.17.1
PATCH 2/7 imx: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline.
---
As an aside, the README files that haven't already been converted to rST should be converted rST and moved to doc/board/ and the MAINTAINERS file updated to include the new documentation file too. Thanks!
--- board/beacon/imx8mm/README | 2 +- board/logicpd/imx6/README | 2 +- board/technexion/pico-imx7d/README.pico-imx7d_BL33 | 2 +- doc/board/actions/cubieboard7.rst | 2 +- doc/board/toradex/colibri_imx7.rst | 1 - 5 files changed, 4 insertions(+), 5 deletions(-)
board/beacon/imx8mm/README +1 -1
@@ -26,7 +26,7 @@ $ cp firmware-imx-8.5/firmware/ddr/synopsys/lpddr4*.bin $(srctree) Build U-Boot ============ $ make imx8mm_beacon_defconfig -$ make flash.bin ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000 +$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000 Burn U-Boot to microSD Card ===========================
board/logicpd/imx6/README +1 -1
@@ -17,7 +17,7 @@ Building U-Boot for Logic PD Development Kit To build U-Boot for the Dual and Quad variants: make imx6q_logic_defconfig - make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux- + make u-boot.imx CROSS_COMPILE=arm-linux- Flashing U-Boot into the SD card
board/technexion/pico-imx7d/README.pico-imx7d_BL33 +1 -1
@@ -4,7 +4,7 @@ The boot sequence is ATF -> OPTEE -> U-Boot -> Linux. U-Boot is in non-secure world in this case. - Build u-boot - Set environment variable of CROSS_COMPILE for your toolchain and ARCH=arm + Set environment variable of CROSS_COMPILE for your toolchain $ make pico-imx7d_bl33_defconfig $ make all
doc/board/actions/cubieboard7.rst +1 -1
@@ -102,7 +102,7 @@ Building U-BOOT proper image $ make clean $ export CROSS_COMPILE=aarch64-linux-gnu- - $ make ARCH=arm cubieboard7_defconfig + $ make cubieboard7_defconfig $ make u-boot-dtb.img -j16 u-boot-dtb.img can now be flashed to debian image partition mounted on host machine.
doc/board/toradex/colibri_imx7.rst +0 -1
@@ -18,7 +18,6 @@ Build U-Boot .. code-block:: bash $ export CROSS_COMPILE=arm-linux-gnueabi- - $ export ARCH=arm $ make colibri_imx7_emmc_defconfig # For NAND: colibri_imx7_defconfig $ make
Signature · 1 line
2.17.1
PATCH 2/7 imx: Remove ARCH= references from documentation
Hi
Quoted 15 lines · Tom Rini
When building U-Boot we select the architecture via
Kconfigand not ARCH being passed in via the environment or make cmdline.Cc Adam Ford <[email protected]>Cc Vanessa Maegima <[email protected]>Cc Otavio Salvador <[email protected]>Cc Igor Opaniuk <[email protected]>Cc Amit Singh Tomar <[email protected]>Cc Manivannan Sadhasivam <[email protected]>Signed-off-by Tom Rini <[email protected]>---
As an aside, the README files that haven't already been converted to rST should be converted rST and moved to doc/board/ and theMAINTAINERSfile updated to include the new documentation file too. Thanks!
Quoted 5 lines
--- board/beacon/imx8mm/README | 2 +- board/logicpd/imx6/README | 2 +- board/technexion/pico-imx7d/README.pico-imx7d_BL33 | 2 +- doc/board/actions/cubieboard7.rst | 2 +-
It is clubbed with imx platform but cubieboard7.rst is for Actions platform which is completely different from imx.
Thanks
-Amit
PATCH 2/7 imx: Remove ARCH= references from documentation
Quoted 24 lines · Amit Tomer
Hi
Quoted 15 lines · Tom Rini
When building U-Boot we select the architecture via
Kconfigand not ARCH being passed in via the environment or make cmdline.Cc Adam Ford <[email protected]>Cc Vanessa Maegima <[email protected]>Cc Otavio Salvador <[email protected]>Cc Igor Opaniuk <[email protected]>Cc Amit Singh Tomar <[email protected]>Cc Manivannan Sadhasivam <[email protected]>Signed-off-by Tom Rini <[email protected]>---
As an aside, the README files that haven't already been converted to rST should be converted rST and moved to doc/board/ and theMAINTAINERSfile updated to include the new documentation file too. Thanks!Quoted 5 lines
--- board/beacon/imx8mm/README | 2 +- board/logicpd/imx6/README | 2 +- board/technexion/pico-imx7d/README.pico-imx7d_BL33 | 2 +- doc/board/actions/cubieboard7.rst | 2 +-
Quoted 2 lines
It is clubbed with imx platform but
cubieboard7.rstis for Actions platform which is completely different from imx.
Whoops, gotta update my mental mapping, sorry.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200519/41f25577/attachment.sig>
PATCH 3/7 powerpc: Remove ARCH= references from documentation
In reply to Tom RiniWhen building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline.
---
As an aside, these files should be converted rST and moved to doc/board/ and the MAINTAINERS file updated to include the new documentation file too. Thanks!
--- board/freescale/c29xpcie/README | 1 - board/freescale/p1010rdb/README.P1010RDB-PA | 1 - board/freescale/p1010rdb/README.P1010RDB-PB | 1 - 3 files changed, 3 deletions(-)
board/freescale/c29xpcie/README +0 -1
@@ -56,7 +56,6 @@ Note: 1 stands for 'off', 0 stands for 'on' Build and program U-Boot to NOR flash ================================== 1. Build u-boot.bin image example: - export ARCH=powerpc export CROSS_COMPILE=/your_path/powerpc-linux-gnu- make C293PCIE
board/freescale/p1010rdb/README.P1010RDB-PA +0 -1
@@ -98,7 +98,6 @@ instead of to CAN/UART1. Build and burn U-Boot to NOR flash ================================== 1. Build u-boot.bin image - export ARCH=powerpc export CROSS_COMPILE=/your_path/powerpc-linux-gnu- make P1010RDB_NOR
board/freescale/p1010rdb/README.P1010RDB-PB +0 -1
@@ -128,7 +128,6 @@ To enable IFC in case of SD boot Build images for different boot mode ==================================== First setup cross compile environment on build host - $ export ARCH=powerpc $ export CROSS_COMPILE=<your-compiler-path>/powerpc-linux-gnu- 1. For NOR boot
Signature · 1 line
2.17.1
PATCH 4/7 rockchip: Remove ARCH= references from documentation
In reply to Tom RiniWhen building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline.
---
As an aside, these files should be converted rST and moved to doc/board/ and the MAINTAINERS file updated to include the new documentation file too. Thanks!
--- board/rockchip/evb_rk3229/README | 1 - board/rockchip/evb_rk3399/README | 1 - board/theobroma-systems/lion_rk3368/README | 4 ++-- board/vamrs/rock960_rk3399/README | 1 - 4 files changed, 2 insertions(+), 5 deletions(-)
board/rockchip/evb_rk3229/README +0 -1
@@ -22,7 +22,6 @@ Compile the U-Boot > cd ../u-boot > export CROSS_COMPILE=arm-linux-gnueabihf- - > export ARCH=arm > make evb-rk3229_defconfig > make > make u-boot.itb
board/rockchip/evb_rk3399/README +0 -1
@@ -54,7 +54,6 @@ Compile U-Boot ============== > cd ../u-boot - > export ARCH=arm64 > export CROSS_COMPILE=aarch64-linux-gnu- > make evb-rk3399_defconfig for firefly-rk3399, use below instead:
board/theobroma-systems/lion_rk3368/README +2 -2
@@ -17,12 +17,12 @@ Configure U-Boot Build the TPL/SPL stage ======================= - > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm + > make CROSS_COMPILE=aarch64-unknown-elf- Build the full U-Boot and a FIT image including the ATF ======================================================= - > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm u-boot.itb + > make CROSS_COMPILE=aarch64-unknown-elf- u-boot.itb Flash the image ===============
board/vamrs/rock960_rk3399/README +0 -1
@@ -57,7 +57,6 @@ Compile the U-Boot > cd ../u-boot > cp ../rkbin/rk33/rk3399_bl31_v1.00.elf ./bl31.elf - > export ARCH=arm64 > export CROSS_COMPILE=aarch64-linux-gnu- > make rock960-rk3399_defconfig > make
Signature · 1 line
2.17.1
PATCH 4/7 rockchip: Remove ARCH= references from documentation
Quoted 74 lines · Tom Rini
When building U-Boot we select the architecture via
Kconfigand not ARCH
being passed in via the environment or make cmdline.Cc Kever Yang <[email protected]>Cc Simon Glass <[email protected]>Cc Philipp Tomsich <[email protected]>Cc Klaus Goger <[email protected]>Cc Jagan Teki <[email protected]>Signed-off-by Tom Rini <[email protected]>---
As an aside, these files should be converted rST and moved to doc/board/
and theMAINTAINERSfile updated to include the new documentation file too. Thanks!--- board/rockchip/evb_rk3229/README | 1 - board/rockchip/evb_rk3399/README | 1 - board/theobroma-systems/lion_rk3368/README | 4 ++-- board/vamrs/rock960_rk3399/README | 1 - 4 files changed, 2 insertions(+), 5 deletions(-)board/rockchip/evb_rk3229/README +0
-1@@ -22,7 +22,6 @@ Compile the U-Boot > cd ../u-boot > export CROSS_COMPILE=arm-linux-gnueabihf- - > export ARCH=arm > make evb-rk3229_defconfig > make > make u-boot.itbboard/rockchip/evb_rk3399/README +0
-1@@ -54,7 +54,6 @@ Compile U-Boot ============== > cd ../u-boot - > export ARCH=arm64 > export CROSS_COMPILE=aarch64-linux-gnu- > make evb-rk3399_defconfig for firefly-rk3399, use below instead:board/theobroma-systems/lion_rk3368/README +2
-2@@ -17,12 +17,12 @@ Configure U-Boot Build the TPL/SPL stage ======================= - > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm + > make CROSS_COMPILE=aarch64-unknown-elf- Build the full U-Boot and a FIT image including the ATF ======================================================= - > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm u-boot.itb + > make CROSS_COMPILE=aarch64-unknown-elf- u-boot.itb Flash the image ===============board/vamrs/rock960_rk3399/README +0
-0
board/vamrs/rock960_rk3399/README Compile the U-Boot · line 62
Quoted 7 lines
board/vamrs/rock960_rk3399/README +0
-1@@ -57,7 +57,6 @@ Compile the U-Boot > cd ../u-boot > cp ../rkbin/rk33/rk3399_bl31_v1.00.elf ./bl31.elf - > export ARCH=arm64 > export CROSS_COMPILE=aarch64-linux-gnu- > make rock960-rk3399_defconfig > make
Thanks for the hint about converting to rST. Will send patches for at least the boards that list me as maintainer.
Best,
Klaus
Re: [PATCH 4/7] rockchip: Remove ARCH= references from documentation【请注意,邮件由[email protected]代发】
In reply to Tom RiniQuoted 9 lines · Tom Rini
When building U-Boot we select the architecture via
Kconfigand not ARCH being passed in via the environment or make cmdline.Cc Kever Yang <[email protected]>Cc Simon Glass <[email protected]>Cc Philipp Tomsich <[email protected]>Cc Klaus Goger <[email protected]>Cc Jagan Teki <[email protected]>Signed-off-by Tom Rini <[email protected]>
Thanks,
- Kever
Quoted 66 lines
---
As an aside, these files should be converted rST and moved to doc/board/ and theMAINTAINERSfile updated to include the new documentation file too. Thanks!--- board/rockchip/evb_rk3229/README | 1 - board/rockchip/evb_rk3399/README | 1 - board/theobroma-systems/lion_rk3368/README | 4 ++-- board/vamrs/rock960_rk3399/README | 1 - 4 files changed, 2 insertions(+), 5 deletions(-)board/rockchip/evb_rk3229/README +0
-1@@ -22,7 +22,6 @@ Compile the U-Boot > cd ../u-boot > export CROSS_COMPILE=arm-linux-gnueabihf- - > export ARCH=arm > make evb-rk3229_defconfig > make > make u-boot.itbboard/rockchip/evb_rk3399/README +0
-1@@ -54,7 +54,6 @@ Compile U-Boot ============== > cd ../u-boot - > export ARCH=arm64 > export CROSS_COMPILE=aarch64-linux-gnu- > make evb-rk3399_defconfig for firefly-rk3399, use below instead:board/theobroma-systems/lion_rk3368/README +2
-2@@ -17,12 +17,12 @@ Configure U-Boot Build the TPL/SPL stage ======================= - > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm + > make CROSS_COMPILE=aarch64-unknown-elf- Build the full U-Boot and a FIT image including the ATF ======================================================= - > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm u-boot.itb + > make CROSS_COMPILE=aarch64-unknown-elf- u-boot.itb Flash the image ===============board/vamrs/rock960_rk3399/README +0
-1@@ -57,7 +57,6 @@ Compile the U-Boot > cd ../u-boot > cp ../rkbin/rk33/rk3399_bl31_v1.00.elf ./bl31.elf - > export ARCH=arm64 > export CROSS_COMPILE=aarch64-linux-gnu- > make rock960-rk3399_defconfig > make
PATCH 5/7 arm: ti: Remove ARCH= references from documentation
In reply to Tom RiniWhen building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline.
---
As an aside, these README files should be converted rST and moved to doc/board/ and the MAINTAINERS file updated to include the new documentation file too. Thanks!
--- board/ti/am65x/README | 8 ++++---- board/ti/j721e/README | 8 ++++---- board/ti/ks2_evm/README | 2 +- doc/uImage.FIT/beaglebone_vboot.txt | 1 - 4 files changed, 9 insertions(+), 10 deletions(-)
board/ti/am65x/README +4 -4
@@ -133,12 +133,12 @@ $ make PLATFORM=k3-am65x CFG_ARM64_core=y 4. U-Boot: 4.1. R5: -$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am65x_evm_r5_defconfig O=/tmp/r5 -$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5 +$ make CROSS_COMPILE=arm-linux-gnueabihf- am65x_evm_r5_defconfig O=/tmp/r5 +$ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5 4.2. A53: -$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- am65x_evm_a53_defconfig O=/tmp/a53 -$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin O=/tmp/a53 +$ make CROSS_COMPILE=aarch64-linux-gnu- am65x_evm_a53_defconfig O=/tmp/a53 +$ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin O=/tmp/a53 Target Images --------------
board/ti/j721e/README +4 -4
@@ -149,12 +149,12 @@ $ make PLATFORM=k3-j721e CFG_ARM64_core=y 4. U-Boot: 4.1. R5: -$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=/tmp/r5 -$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5 +$ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=/tmp/r5 +$ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5 4.2. A72: -$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=/tmp/a72 -$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin O=/tmp/a72 +$ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=/tmp/a72 +$ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin O=/tmp/a72 Target Images --------------
board/ti/ks2_evm/README +1 -1
@@ -74,7 +74,7 @@ Supported image formats: Build instructions: =================== Examples for k2hk, for k2e, k2l and k2g just replace k2hk prefix accordingly. -Don't forget to add ARCH=arm and CROSS_COMPILE. +Don't forget to add CROSS_COMPILE. To build u-boot.bin, u-boot-spi.gph, MLO: >make k2hk_evm_defconfig
doc/uImage.FIT/beaglebone_vboot.txt +0 -1
@@ -67,7 +67,6 @@ or if you just installed gcc-arm-linux-gnueabi then it might be b. Configure and build U-Boot with verified boot enabled: - export ARCH=arm export UBOOT=/path/to/u-boot cd $UBOOT # You can add -j10 if you have 10 CPUs to make it faster
Signature · 1 line
2.17.1
PATCH 6/7 m68k: Remove ARCH= references from documentation
In reply to Tom RiniWhen building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline.
While in here, add the doc file to the MAINTAINERS entry for coldfire.
--- MAINTAINERS | 1 + doc/arch/m68k.rst | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-)
MAINTAINERS +1 -0
@@ -590,6 +590,7 @@ M: Angelo Dureghello <[email protected]> S: Maintained T: git https://gitlab.denx.de/u-boot/custodians/u-boot-coldfire.git F: arch/m68k/ +F: doc/arch/m68k.rst DFU M: Lukasz Majewski <[email protected]>
doc/arch/m68k.rst +3 -3
@@ -35,7 +35,7 @@ development boards. Supported CPU families ---------------------- -Please "make menuconfig" with ARCH=m68k, or check arch/m68k/cpu to see the +Please "make menuconfig" and select "m68k" or check arch/m68k/cpu to see the currently supported processor and families.
@@ -75,8 +75,8 @@ A bash script similar to the one below may be used: board=M5475DFE make distclean - make ARCH=m68k ${board}_defconfig - make ARCH=m68k KBUILD_VERBOSE=1 + make ${board}_defconfig + make KBUILD_VERBOSE=1 Adopted toolchains
Signature · 1 line
2.17.1
PATCH 7/7 fu540: Remove ARCH= references from documentation
In reply to Tom RiniWhen building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline.
While in here, add the doc file to the MAINTAINERS entry for coldfire.
--- board/sifive/fu540/MAINTAINERS | 1 + doc/board/sifive/fu540.rst | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)
board/sifive/fu540/MAINTAINERS +1 -0
@@ -5,5 +5,6 @@ M: Anup Patel <[email protected]> M: Atish Patra <[email protected]> S: Maintained F: board/sifive/fu540/ +F: doc/board/sifive/fu540.rst F: include/configs/sifive-fu540.h F: configs/sifive_fu540_defconfig
doc/board/sifive/fu540.rst +0 -1
@@ -39,7 +39,6 @@ Building .. code-block:: none - export ARCH=riscv export CROSS_COMPILE=<riscv64 toolchain prefix> 3. make sifive_fu540_defconfig
Signature · 1 line
2.17.1
PATCH 7/7 fu540: Remove ARCH= references from documentation
Quoted 4 lines · Tom Rini
When building U-Boot we select the architecture via
Kconfigand not ARCH being passed in via the environment or make cmdline.While in here, add the doc file to the
MAINTAINERSentry for coldfire.
I've reworded this locally to just be:
While in here, add the doc file to the MAINTAINERS entry.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200519/738d2779/attachment.sig>
PATCH 1/7 amlogic: Remove ARCH= references from documentation
In reply to Tom RiniHi,
Le 19/05/2020 ? 16:51, Tom Rini a ?crit :
Quoted 11 lines
When building U-Boot we select the architecture via
Kconfigand not ARCH being passed in via the environment or make cmdline.Cc Beniamino Galvani <[email protected]>Cc Neil Armstrong <[email protected]>Cc u-boot-amlogic at groups.ioSigned-off-by Tom Rini <[email protected]>---
As an aside, these files should be converted rST and moved to doc/board/ and theMAINTAINERSfile updated to include the new documentation file too. Thanks!
Adding this to my TODO list !
Thanks,
Neil
Quoted 231 lines
--- board/amlogic/p200/README.nanopi-k2 | 1 - board/amlogic/p200/README.odroid-c2 | 1 - board/amlogic/p200/README.p200 | 1 - board/amlogic/p201/README.p201 | 1 - board/amlogic/p212/README.khadas-vim | 1 - board/amlogic/p212/README.libretech-ac | 1 - board/amlogic/p212/README.libretech-cc | 1 - board/amlogic/p212/README.p212 | 1 - board/amlogic/q200/README.khadas-vim2 | 1 - board/amlogic/q200/README.q200 | 1 - board/amlogic/s400/README | 1 - board/amlogic/sei510/README | 1 - board/amlogic/sei610/README | 1 - board/amlogic/u200/README | 1 - board/amlogic/w400/README.khadas-vim3 | 1 - board/amlogic/w400/README.khadas-vim3l | 1 - board/amlogic/w400/README.odroid-n2 | 1 - board/amlogic/w400/README.w400 | 1 - 18 files changed, 18 deletions(-)board/amlogic/p200/README.nanopi-k2 +0
-1@@ -24,7 +24,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make nanopi-k2_defconfig > makeboard/amlogic/p200/README.odroid-c2 +0
-1@@ -29,7 +29,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make odroid-c2_defconfig > makeboard/amlogic/p200/README.p200 +0
-1@@ -31,7 +31,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make p200_defconfig > makeboard/amlogic/p201/README.p201 +0
-1@@ -31,7 +31,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make p201_defconfig > makeboard/amlogic/p212/README.khadas-vim +0
-1@@ -30,7 +30,6 @@ Currently the u-boot port supports the following devices: U-Boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make khadas-vim_defconfig > makeboard/amlogic/p212/README.libretech-ac +0
-1@@ -25,7 +25,6 @@ Currently the U-Boot port supports the following devices: U-Boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make libretech-ac_defconfig > makeboard/amlogic/p212/README.libretech-cc +0
-1@@ -30,7 +30,6 @@ Currently the U-Boot port supports the following devices: U-Boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make libretech-cc_defconfig > makeboard/amlogic/p212/README.p212 +0
-1@@ -31,7 +31,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make p212_defconfig > makeboard/amlogic/q200/README.khadas-vim2 +0
-1@@ -31,7 +31,6 @@ Currently the u-boot port supports the following devices: U-Boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make khadas-vim2_defconfig > makeboard/amlogic/q200/README.q200 +0
-1@@ -30,7 +30,6 @@ Currently the u-boot port supports the following devices: U-Boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make khadas-vim2_defconfig > makeboard/amlogic/s400/README +0
-1@@ -31,7 +31,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make s400_defconfig > makeboard/amlogic/sei510/README +0
-1@@ -22,7 +22,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make sei510_defconfig > makeboard/amlogic/sei610/README +0
-1@@ -18,7 +18,6 @@ specifications: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make sei610_defconfig > makeboard/amlogic/u200/README +0
-1@@ -27,7 +27,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make u200_defconfig > makeboard/amlogic/w400/README.khadas-vim3 +0
-1@@ -29,7 +29,6 @@ Currently the U-Boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make khadas-vim3_defconfig > makeboard/amlogic/w400/README.khadas-vim3l +0
-1@@ -29,7 +29,6 @@ Currently the U-Boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make khadas-vim3l_defconfig > makeboard/amlogic/w400/README.odroid-n2 +0
-1@@ -28,7 +28,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make odroid-n2_defconfig > makeboard/amlogic/w400/README.w400 +0
-0
board/amlogic/w400/README.w400 Currently the u-boot port supports the following devices: · line 32
Quoted 7 lines
board/amlogic/w400/README.w400 +0
-1@@ -27,7 +27,6 @@ Currently the u-boot port supports the following devices: u-boot compilation ================== - > export ARCH=arm > export CROSS_COMPILE=aarch64-none-elf- > make w400_defconfig > make