Skip to contentSkip to conversation

arm64: dts: ls1028a: sl28: keep switch port names consistent

PATCH Applied Michael Walle 2 participants 2 messages May 19, 2020 – May 20, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: ls1028a: sl28: keep switch port names consistent

Keep the switch port labels consistent across the different board variants. If the user wants to rename them, it should be done in user-space.

Fixes ab43f0307449 ("arm64: dts: ls1028a: sl28: add support for variant 2")
---
 .../boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts      | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +2 -2
index 901b5b161def..dd764b720fb0 100644
@@ -53,14 +53,14 @@
 };
 
 &mscc_felix_port0 {
-	label = "gbe0";
+	label = "swp0";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	status = "okay";
 };
 
 &mscc_felix_port1 {
-	label = "gbe1";
+	label = "swp1";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
 	status = "okay";
Signature · 1 line
2.20.1
Applied
#1 lore raw
Quoted 6 lines · Michael Walle

Keep the switch port labels consistent across the different board variants. If the user wants to rename them, it should be done in user-space.

Fixes ab43f0307449 ("arm64: dts: ls1028a: sl28: add support for variant 2")

Applied, thanks.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel