doc: libxt_MARK: OUTPUT chain is fine, too
Phil Sutter
reviewerPATCH 1/1 doc: libxt_MARK: OUTPUT chain is fine, too
In order to route packets originating from the host itself based on fwmark, mangle table's OUTPUT chain must be used. Mention this chain as alternative to PREROUTING.
--- extensions/libxt_MARK.man | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
extensions/libxt_MARK.man +2 -2
@@ -1,7 +1,7 @@ This target is used to set the Netfilter mark value associated with the packet. It can, for example, be used in conjunction with routing based on fwmark (needs -iproute2). If you plan on doing so, note that the mark needs to be set in the -PREROUTING chain of the mangle table to affect routing. +iproute2). If you plan on doing so, note that the mark needs to be set in +either the PREROUTING or the OUTPUT chain of the mangle table to affect routing. The mark field is 32 bits wide. .TP \fB\-\-set\-xmark\fP \fIvalue\fP[\fB/\fP\fImask\fP]
Signature · 1 line
2.26.2
Pablo Neira Ayuso
maintainerQuoted 15 lines · Phil Sutter
In order to route packets originating from the host itself based on fwmark, mangle table's OUTPUT chain must be used. Mention this chain as alternative to PREROUTING.
Fixes c9be7f153f7bf ("doc: libxt_MARK: no longer restricted to mangle table")Signed-off-by Phil Sutter <[email protected]>--- extensions/libxt_MARK.man | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)extensions/libxt_MARK.man +0
-0
extensions/libxt_MARK.man line 4
Quoted 6 lines
extensions/libxt_MARK.man +2
-2@@ -1,7 +1,7 @@ This target is used to set the Netfilter mark value associated with the packet. It can, for example, be used in conjunction with routing based on fwmark (needs -iproute2). If you plan on doing so, note that the mark needs to be set in the -PREROUTING chain of the mangle table to affect routing. +iproute2). If you plan on doing so, note that the mark needs to be set in +either the PREROUTING or the OUTPUT chain of the mangle table to affect routing.
You have two choices:
* Set the mark in filter OUTPUT chain => it does not affect routing.
* Set the mark in the mangle OUTPUT chain => it _does_ affect routing.
Are we on the same page?
Pablo Neira Ayuso
maintainerQuoted 25 lines · Pablo Neira Ayuso
Quoted 15 lines · Phil Sutter
In order to route packets originating from the host itself based on fwmark, mangle table's OUTPUT chain must be used. Mention this chain as alternative to PREROUTING.
Fixes c9be7f153f7bf ("doc: libxt_MARK: no longer restricted to mangle table")Signed-off-by Phil Sutter <[email protected]>--- extensions/libxt_MARK.man | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)extensions/libxt_MARK.man +0
-0extensions/libxt_MARK.man line 4
Quoted 6 lines
extensions/libxt_MARK.man +2
-2@@ -1,7 +1,7 @@ This target is used to set the Netfilter mark value associated with the packet. It can, for example, be used in conjunction with routing based on fwmark (needs -iproute2). If you plan on doing so, note that the mark needs to be set in the -PREROUTING chain of the mangle table to affect routing. +iproute2). If you plan on doing so, note that the mark needs to be set in +either the PREROUTING or the OUTPUT chain of the mangle table to affect routing.You have two choices:
Quoted 4 lines
* Set the mark in filter OUTPUT chain => it does not affect routing.
* Set the mark in the mangle OUTPUT chain => it _does_ affect routing.Are we on the same page?
Ah, I right I just re-read and it looks fine.
Phil Sutter
reviewerQuoted 26 lines · Pablo Neira Ayuso
Quoted 25 lines · Pablo Neira Ayuso
Quoted 15 lines · Phil Sutter
In order to route packets originating from the host itself based on fwmark, mangle table's OUTPUT chain must be used. Mention this chain as alternative to PREROUTING.
Fixes c9be7f153f7bf ("doc: libxt_MARK: no longer restricted to mangle table")Signed-off-by Phil Sutter <[email protected]>--- extensions/libxt_MARK.man | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)extensions/libxt_MARK.man +0
-0extensions/libxt_MARK.man line 4
Quoted 6 lines
extensions/libxt_MARK.man +2
-2@@ -1,7 +1,7 @@ This target is used to set the Netfilter mark value associated with the packet. It can, for example, be used in conjunction with routing based on fwmark (needs -iproute2). If you plan on doing so, note that the mark needs to be set in the -PREROUTING chain of the mangle table to affect routing. +iproute2). If you plan on doing so, note that the mark needs to be set in +either the PREROUTING or the OUTPUT chain of the mangle table to affect routing.You have two choices:
Quoted 6 lines
Quoted 4 lines
* Set the mark in filter OUTPUT chain => it does not affect routing.
* Set the mark in the mangle OUTPUT chain => it _does_ affect routing.Are we on the same page?
Ah, I right I just re-read and it looks fine.
OK. :)
Thanks, Phil