doc: update for ice
PATCH 1/1 doc: update for ice
Update the description and limitation about ice PMD according to the product release strategy.
--- doc/guides/nics/ice.rst | 29 +++++------------------------ 1 file changed, 5 insertions(+), 24 deletions(-)
doc/guides/nics/ice.rst +5 -24
@@ -12,33 +12,14 @@ the Intel Ethernet Controller E810. Prerequisites ------------- -- Identifying your adapter using `Intel Support - <http://www.intel.com/support>`_ and get the latest NVM/FW images. +- The E810 B0 is currently in sampling state only. To obtain early samples and/or get further information + about kernel drivers, firmware and DDP support, please speak to your Intel representative. - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. - To get better performance on Intel platforms, please follow the "How to get best performance with NICs on Intel platforms" section of the :ref:`Getting Started Guide for Linux <linux_gsg>`. -Recommended Matching List -------------------------- - -It is highly recommended to upgrade the ice kernel driver and firmware and -DDP packages to avoid the compatibility issues with ice PMD. Here is the -suggested matching list. - - +----------------------+-----------------------+------------------+----------------+-------------------+ - | DPDK version | Kernel driver version | Firmware version | DDP OS Package | DDP COMMS Package | - +======================+=======================+==================+================+===================+ - | 20.02 | 0.12.25 | 1.1.16.39 | 1.3.4 | 1.3.10 | - +----------------------+-----------------------+------------------+----------------+-------------------+ - | 19.11 | 0.12.25 | 1.1.16.39 | 1.3.4 | 1.3.10 | - +----------------------+-----------------------+------------------+----------------+-------------------+ - | 19.08 (experimental) | 0.10.1 | 1.1.12.7 | 1.2.0 | N/A | - +----------------------+-----------------------+------------------+----------------+-------------------+ - | 19.05 (experimental) | 0.9.4 | 1.1.10.16 | 1.1.0 | N/A | - +----------------------+-----------------------+------------------+----------------+-------------------+ - Pre-Installation Configuration ------------------------------
@@ -330,7 +311,7 @@ is stored in ``ice_adapter->active_pkg_type``. A symbolic link to the DDP package file is also ok. The same package file is used by both the kernel driver and the DPDK PMD. -19.02 limitation -~~~~~~~~~~~~~~~~ +limitation +~~~~~~~~~~ -Ice code released in 19.02 is for evaluation only. +Ice code released is for evaluation only before E810 C0 is released.
Signature · 1 line
2.17.1
Quoted 83 lines
-----Original Message-----
From: Ye, Xiaolong <[email protected]>
Sent: Wednesday, May 20, 2020 14:00
To: Yang, Qiming <[email protected]>; Zhang, Qi Z <[email protected]>; Mcnamara, John <[email protected]>; Kovacevic, Marko <[email protected]>
Cc: [email protected]; Ye, Xiaolong <[email protected]>
Subject: [PATCH] doc: update for iceUpdate the description and limitation about ice PMD according to the product release strategy.
Signed-off-by Xiaolong Ye <[email protected]>--- doc/guides/nics/ice.rst | 29 +++++------------------------ 1 file changed, 5 insertions(+), 24 deletions(-)doc/guides/nics/ice.rst index renamed from doc/guides/nics/ice.rst +0
-0
c5278fc757..b698790440100644doc/guides/nics/ice.rst +3
-2@@ -12,33 +12,14 @@ the Intel Ethernet Controller E810. Prerequisites ------------- -- Identifying your adapter using `Intel Support - <http://www.intel.com/support>`_ and get the latest NVM/FW images. +- The E810 B0 is currently in sampling state only. To obtain early +samples and/or get further information + about kernel drivers, firmware and DDP support, please speak to your Intelrepresentative.
- Follow the DPDK :ref:
Getting Started Guide for Linux <linux_gsg>to setup
the basic DPDK environment.- To get better performance on Intel platforms, please follow the "How to
get best performance with NICs on Intel platforms"
section of the :ref:Getting Started Guide for Linux <linux_gsg>.doc/guides/nics/ice.rst +0
-5-Recommended Matching List -------------------------- - -It is highly recommended to upgrade the ice kernel driver and firmware and -DDP packages to avoid the compatibility issues with ice PMD. Here is the -suggested matching list.
doc/guides/nics/ice.rst +0
-4- - +----------------------+-----------------------+------------------+----------------+---- ---------------+ - | DPDK version | Kernel driver version | Firmware version | DDP OSPackage | DDP COMMS Package |
-
+======================+=======================+==========
========+================+===================+doc/guides/nics/ice.rst +0
-7- | 20.02 | 0.12.25 | 1.1.16.39 | 1.3.4 | 1.3.10 | - +----------------------+-----------------------+------------------+----------------+---- ---------------+ - | 19.11 | 0.12.25 | 1.1.16.39 | 1.3.4 | 1.3.10 | - +----------------------+-----------------------+------------------+----------------+---- ---------------+ - | 19.08 (experimental) | 0.10.1 | 1.1.12.7 | 1.2.0 | N/A|
doc/guides/nics/ice.rst +0
-3- +----------------------+-----------------------+------------------+----------------+---- ---------------+ - | 19.05 (experimental) | 0.9.4 | 1.1.10.16 | 1.1.0 | N/A|
doc/guides/nics/ice.rst +0
-3- +----------------------+-----------------------+------------------+----------------+---- ---------------+ - Pre-Installation Configuration ------------------------------@@ -330,7 +311,7 @@ is stored in ``ice_adapter->active_pkg_type``. A symbolic link to the DDP package file is also ok. The same package file isused by both the kernel driver and the DPDK PMD.
-19.02 limitation
-~~~~~~~~~~~~~~~~doc/guides/nics/ice.rst +3
-2+limitation +~~~~~~~~~~ -Ice code released in 19.02 is for evaluation only. +Ice code released is for evaluation only before E810 C0 is released. --
Quoted 1 line
2.17.1
Ye Xiaolong
AppliedQuoted 62 lines · Xiaolong Ye
Update the description and limitation about ice PMD according to the product release strategy.
Signed-off-by Xiaolong Ye <[email protected]>---
doc/guides/nics/ice.rst| 29 +++++------------------------1 file changed, 5 insertions(+), 24 deletions(-)doc/guides/nics/ice.rst +0
-0@@ -12,33 +12,14 @@ the Intel Ethernet Controller E810.Prerequisites
--------------- Identifying your adapter using `Intel Support
doc/guides/nics/ice.rst +2
-22- <http://www.intel.com/support>`_ and get the latest NVM/FW images. +- The E810 B0 is currently in sampling state only. To obtain early samples and/or get further information + about kernel drivers, firmware and DDP support, please speak to your Intel representative. - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. - To get better performance on Intel platforms, please follow the "How to get best performance with NICs on Intel platforms" section of the :ref:`Getting Started Guide for Linux <linux_gsg>`. -Recommended Matching List -------------------------- - -It is highly recommended to upgrade the ice kernel driver and firmware and -DDP packages to avoid the compatibility issues with ice PMD. Here is the -suggested matching list. - - +----------------------+-----------------------+------------------+----------------+-------------------+ - | DPDK version | Kernel driver version | Firmware version | DDP OS Package | DDP COMMS Package | - +======================+=======================+==================+================+===================+ - | 20.02 | 0.12.25 | 1.1.16.39 | 1.3.4 | 1.3.10 | - +----------------------+-----------------------+------------------+----------------+-------------------+ - | 19.11 | 0.12.25 | 1.1.16.39 | 1.3.4 | 1.3.10 | - +----------------------+-----------------------+------------------+----------------+-------------------+ - | 19.08 (experimental) | 0.10.1 | 1.1.12.7 | 1.2.0 | N/A | - +----------------------+-----------------------+------------------+----------------+-------------------+ - | 19.05 (experimental) | 0.9.4 | 1.1.10.16 | 1.1.0 | N/A | - +----------------------+-----------------------+------------------+----------------+-------------------+ -Pre-Installation Configuration
------------------------------doc/guides/nics/ice.rst +0
-0@@ -330,7 +311,7 @@ is stored in ``ice_adapter->active_pkg_type``.A symbolic link to the DDP package file is also ok. The same package file is used by both the kernel driver and the DPDK PMD.
-19.02 limitation
-~~~~~~~~~~~~~~~~doc/guides/nics/ice.rst +3
-1+limitation +~~~~~~~~~~ -Ice code released in 19.02 is for evaluation only. +Ice code released is for evaluation only before E810 C0 is released.Signature · 1 line
2.17.1
Applied to dpdk-next-net-intel with qiming's ack, Thanks.
PATCH v2 1/1 doc: update for ice
In reply to Xiaolong YeUpdate the description and limitation about ice PMD according to the product release strategy.
--- doc/guides/nics/ice.rst | 29 +++++------------------------ 1 file changed, 5 insertions(+), 24 deletions(-)
doc/guides/nics/ice.rst +5 -24
@@ -12,33 +12,14 @@ the Intel Ethernet Controller E810. Prerequisites ------------- -- Identifying your adapter using `Intel Support - <http://www.intel.com/support>`_ and get the latest NVM/FW images. +- The E810 is currently in sampling state only. To obtain early samples and/or get further information + about kernel drivers, firmware and DDP support, please speak to your Intel representative. - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment. - To get better performance on Intel platforms, please follow the "How to get best performance with NICs on Intel platforms" section of the :ref:`Getting Started Guide for Linux <linux_gsg>`. -Recommended Matching List -------------------------- - -It is highly recommended to upgrade the ice kernel driver and firmware and -DDP packages to avoid the compatibility issues with ice PMD. Here is the -suggested matching list. - - +----------------------+-----------------------+------------------+----------------+-------------------+ - | DPDK version | Kernel driver version | Firmware version | DDP OS Package | DDP COMMS Package | - +======================+=======================+==================+================+===================+ - | 20.02 | 0.12.25 | 1.1.16.39 | 1.3.4 | 1.3.10 | - +----------------------+-----------------------+------------------+----------------+-------------------+ - | 19.11 | 0.12.25 | 1.1.16.39 | 1.3.4 | 1.3.10 | - +----------------------+-----------------------+------------------+----------------+-------------------+ - | 19.08 (experimental) | 0.10.1 | 1.1.12.7 | 1.2.0 | N/A | - +----------------------+-----------------------+------------------+----------------+-------------------+ - | 19.05 (experimental) | 0.9.4 | 1.1.10.16 | 1.1.0 | N/A | - +----------------------+-----------------------+------------------+----------------+-------------------+ - Pre-Installation Configuration ------------------------------
@@ -330,7 +311,7 @@ is stored in ``ice_adapter->active_pkg_type``. A symbolic link to the DDP package file is also ok. The same package file is used by both the kernel driver and the DPDK PMD. -19.02 limitation -~~~~~~~~~~~~~~~~ +limitation +~~~~~~~~~~ -Ice code released in 19.02 is for evaluation only. +Ice code released is for evaluation only currently.
Signature · 1 line
2.17.1
Ferruh Yigit
AppliedQuoted 5 lines · Xiaolong Ye
Update the description and limitation about ice PMD according to the product release strategy.
Signed-off-by Xiaolong Ye <[email protected]>Acked-by Qiming Yang <[email protected]>
Applied to dpdk-next-net/master, thanks.