testing and plugin updates
cover testing and plugin updates
Hi,
Here is the current status of various testing and plugin related patches. Most of the patches should be uncontroversial although I would draw attention to the cpu and linux-user QOM object lifetime patches. I think properly de-referencing the vCPU object associated with the linux-user thread is the cleaner solution but it does involve also changing some assumptions about the cpu indexing.
The following patches need review:
- plugins: new lockstep plugin for debugging TCG changes
- linux-user: properly "unrealize" vCPU object
- cpus-common: ensure auto-assigned cpu_indexes don't clash
- tests/docker: use a gcc-10 based image for arm64 tests
- tests/docker: add debian11 base image
- tests/docker: bump fedora to 32
- tests/tcg: better detect confused gdb which can't connect
- tests/fp: split and audit the conversion tests
- tests/fp: enable extf80_le_quite tests
- configure: add alternate binary for genisoimage
Alex Bennée (13):
configure: add alternate binary for genisoimage tests/vm: pass --genisoimage to basevm script tests/tcg: fix invocation of the memory record/replay tests tests/fp: enable extf80_le_quite tests
tests/fp: split and audit the conversion tests tests/tcg: better detect confused gdb which can't connect tests/docker: bump fedora to 32
tests/docker: add debian11 base image tests/docker: use a gcc-10 based image for arm64 tests
cpus-common: ensure auto-assigned cpu_indexes don't clash
linux-user: properly "unrealize" vCPU object tests/tcg: add new threadcount test
plugins: new lockstep plugin for debugging TCG changes
Richard Henderson (1):
tests/tcg/aarch64: Add bti smoke test
Thomas Huth (1):
travis.yml: Use clang++ in the Clang tests
configure | 2 +- cpus-common.c | 10 +- linux-user/syscall.c | 19 +- tests/plugin/lockstep.c | 340 ++++++++++++++++++ tests/tcg/aarch64/bti-1.c | 62 ++++ tests/tcg/aarch64/bti-crt.inc.c | 51 +++ tests/tcg/multiarch/threadcount.c | 64 ++++ .travis.yml | 8 +- tests/Makefile.include | 44 ++- tests/docker/Makefile.include | 4 +- .../debian-arm64-test-cross.docker | 13 + tests/docker/dockerfiles/debian11.docker | 18 + tests/docker/dockerfiles/fedora.docker | 2 +- tests/plugin/Makefile | 1 + tests/tcg/Makefile.target | 2 +- tests/tcg/aarch64/Makefile.softmmu-target | 2 +- tests/tcg/aarch64/Makefile.target | 9 + tests/tcg/configure.sh | 8 +- tests/tcg/multiarch/Makefile.target | 2 + tests/tcg/multiarch/gdbstub/sha1.py | 4 + tests/vm/Makefile.include | 1 + tests/vm/basevm.py | 16 +- 22 files changed, 641 insertions(+), 41 deletions(-) create mode 100644 tests/plugin/lockstep.c create mode 100644 tests/tcg/aarch64/bti-1.c create mode 100644 tests/tcg/aarch64/bti-crt.inc.c create mode 100644 tests/tcg/multiarch/threadcount.c create mode 100644 tests/docker/dockerfiles/debian-arm64-test-cross.docker create mode 100644 tests/docker/dockerfiles/debian11.docker
Signature · 1 line
2.20.1
PATCH 1/15 configure: add alternate binary for genisoimage
Not all distros ship genisoimage which is a Debian fork from the original cdrtools. As the options are pretty much the same support it as a fallback binary.
--- configure | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
configure +1 -1
@@ -941,7 +941,7 @@ done # Check for ancillary tools used in testing genisoimage= -for binary in genisoimage +for binary in genisoimage mkisofs do if has $binary then
Signature · 1 line
2.20.1
PATCH 2/15 tests/vm: pass --genisoimage to basevm script
In reply to Alex BennéeIf we have an alternative to genisoimage we really need to tell the script about it as well so it can use it. It will still default to genisoimage in case it is run outside our build machinery.
--- tests/vm/Makefile.include | 1 + tests/vm/basevm.py | 16 ++++++++++------ 2 files changed, 11 insertions(+), 6 deletions(-)
tests/vm/Makefile.include +1 -0
@@ -56,6 +56,7 @@ $(IMAGES_DIR)/%.img: $(SRC_PATH)/tests/vm/% \ $(call quiet-command, \ $(PYTHON) $< \ $(if $(V)$(DEBUG), --debug) \ + $(if $(GENISOIMAGE),--genisoimage $(GENISOIMAGE)) \ --image "$@" \ --force \ --build-image $@, \
tests/vm/basevm.py +10 -6
@@ -61,8 +61,9 @@ class BaseVM(object): # 4 is arbitrary, but greater than 2, # since we found we need to wait more than twice as long. tcg_ssh_timeout_multiplier = 4 - def __init__(self, debug=False, vcpus=None): + def __init__(self, debug=False, vcpus=None, genisoimage=None): self._guest = None + self._genisoimage = genisoimage self._tmpdir = os.path.realpath(tempfile.mkdtemp(prefix="vm-test-", suffix=".tmp", dir="."))
@@ -381,12 +382,12 @@ class BaseVM(object): udata.writelines(["apt:\n", " proxy: %s" % proxy]) udata.close() - subprocess.check_call(["genisoimage", "-output", "cloud-init.iso", + subprocess.check_call([self._genisoimage, "-output", "cloud-init.iso", "-volid", "cidata", "-joliet", "-rock", "user-data", "meta-data"], - cwd=cidir, - stdin=self._devnull, stdout=self._stdout, - stderr=self._stdout) + cwd=cidir, + stdin=self._devnull, stdout=self._stdout, + stderr=self._stdout) return os.path.join(cidir, "cloud-init.iso")
@@ -424,6 +425,8 @@ def parse_args(vmcls): help="Interactively run command") parser.add_option("--snapshot", "-s", action="store_true", help="run tests with a snapshot") + parser.add_option("--genisoimage", default="genisoimage", + help="iso imaging tool") parser.disable_interspersed_args() return parser.parse_args()
@@ -435,7 +438,8 @@ def main(vmcls): return 1 logging.basicConfig(level=(logging.DEBUG if args.debug else logging.WARN)) - vm = vmcls(debug=args.debug, vcpus=args.jobs) + vm = vmcls(debug=args.debug, vcpus=args.jobs, + genisoimage=args.genisoimage) if args.build_image: if os.path.exists(args.image) and not args.force: sys.stderr.writelines(["Image file exists: %s\n" % args.image,
Signature · 1 line
2.20.1
PATCH 3/15 travis.yml: Use clang++ in the Clang tests
In reply to Alex BennéeFrom: Thomas Huth <[email protected]>
Our configure script does not look for clang++ automatically, so we should use --cxx=clang++ to make sure that we test our C++ code with Clang, too. And while we're at it, also use --host-cc=clang here to avoid that we use the normal "cc" as host C compiler.
Message-Id: <[email protected]>
--- .travis.yml | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
.travis.yml +5 -3
@@ -205,14 +205,15 @@ jobs: # Test with Clang for compile portability (Travis uses clang-5.0) - name: "Clang (user)" env: - - CONFIG="--disable-system" + - CONFIG="--disable-system --host-cc=clang --cxx=clang++" - CACHE_NAME="${TRAVIS_BRANCH}-linux-clang-default" compiler: clang - name: "Clang (main-softmmu)" env: - - CONFIG="--target-list=${MAIN_SOFTMMU_TARGETS} " + - CONFIG="--target-list=${MAIN_SOFTMMU_TARGETS} + --host-cc=clang --cxx=clang++" - CACHE_NAME="${TRAVIS_BRANCH}-linux-clang-sanitize" compiler: clang before_script:
@@ -222,7 +223,8 @@ jobs: - name: "Clang (other-softmmu)" env: - - CONFIG="--disable-user --target-list-exclude=${MAIN_SOFTMMU_TARGETS}" + - CONFIG="--disable-user --target-list-exclude=${MAIN_SOFTMMU_TARGETS} + --host-cc=clang --cxx=clang++" - CACHE_NAME="${TRAVIS_BRANCH}-linux-clang-default" compiler: clang
Signature · 1 line
2.20.1
PATCH 4/15 tests/tcg: fix invocation of the memory record/replay tests
In reply to Alex BennéeI'm not sure when this broke but we should use EXTRA_RUNS for "virtual" tests which are not generated from the binary names.
---
v2
- keep the PHONY's for the benefit of output
--- tests/tcg/aarch64/Makefile.softmmu-target | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tests/tcg/aarch64/Makefile.softmmu-target +1 -1
@@ -61,7 +61,7 @@ run-memory-replay: memory-replay run-memory-record $(QEMU_OPTS) memory, \ "$< on $(TARGET_NAME)") -EXTRA_TESTS+=memory-record memory-replay +EXTRA_RUNS+=run-memory-replay ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_3),) pauth-3: CFLAGS += -march=armv8.3-a
Signature · 1 line
2.20.1
PATCH 5/15 tests/fp: enable extf80_le_quite tests
In reply to Alex BennéeThese have been fixed now so we no longer need a special version of the le_quiet rule to skip the test.
--- tests/Makefile.include | 7 ------- 1 file changed, 7 deletions(-)
tests/Makefile.include +0 -7
@@ -741,13 +741,6 @@ check-softfloat-%: $(FP_TEST_BIN) SF_COMPARE_OPS=eq eq_signaling le le_quiet lt_quiet SF_COMPARE_RULES=$(patsubst %,check-softfloat-%, $(SF_COMPARE_OPS)) -# FIXME: extF80_le_quiet (broken) -check-softfloat-le_quiet: $(FP_TEST_BIN) - $(call test-softfloat, \ - f16_le_quiet f32_le_quiet f64_le_quiet \ - f128_le_quiet, \ - le_quiet) - # FIXME: extF80_lt_quiet (broken) check-softfloat-lt_quiet: $(FP_TEST_BIN) $(call test-softfloat, \
Signature · 1 line
2.20.1
Re: [PATCH v1 05/15] tests/fp: enable extf80_le_quite tests
Quoted 7 lines · Alex Bennée
These have been fixed now so we no longer need a special version of the
le_quietrule to skip the test.Signed-off-by Alex Bennée <[email protected]>--- tests/Makefile.include | 7 ------- 1 file changed, 7 deletions(-)
r~
PATCH 6/15 tests/fp: split and audit the conversion tests
In reply to Alex BennéeSplit the float conversion tests into separate groups and audit the tests to check what is still broken. I was able to enable a bunch of tests that had been missed before:
all the float to float conversions
ui32_to_extF80
ui64_to_extF80
extF80_to_ui32
extF80_to_ui32_r_minMag
extF80_to_ui64
extF80_to_ui64_r_minMag
--- tests/Makefile.include | 37 ++++++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-)
tests/Makefile.include +32 -5
@@ -687,11 +687,26 @@ test-softfloat = $(call quiet-command, \ (cat $2.out && exit 1;), \ "FLOAT TEST", $2) -# Conversion Routines: +# Conversion Routines: Float to Float +# FIXME: f32_to_f128 (broken), f64_to_f128 (broken) +# FIXME: f128_to_f32(broken), f128_to_f64 (broken) +# FIXME: f128_to_extF80 (broken) +check-softfloat-conv-f2f: $(FP_TEST_BIN) + $(call test-softfloat, \ + f16_to_f32 f16_to_f64 \ + f16_to_extF80 f16_to_f128 \ + f32_to_f16 f32_to_f64 \ + f32_to_extF80 \ + f64_to_f16 f64_to_f32 \ + extF80_to_f16 extF80_to_f32 \ + extF80_to_f64 extF80_to_f128 \ + f128_to_f16, \ + float-to-float) + +# Conversion Routines: Int and Uint to Float # FIXME: i32_to_extF80 (broken), i64_to_extF80 (broken) -# ui32_to_f128 (not implemented), extF80_roundToInt (broken) -# -check-softfloat-conv: $(FP_TEST_BIN) +# ui32_to_f128 (not implemented) +check-softfloat-conv-to-float: $(FP_TEST_BIN) $(call test-softfloat, \ i32_to_f16 i64_to_f16 \ i32_to_f32 i64_to_f32 \
@@ -701,7 +716,12 @@ check-softfloat-conv: $(FP_TEST_BIN) ui32_to_f16 ui64_to_f16 \ ui32_to_f32 ui64_to_f32 \ ui32_to_f64 ui64_to_f64 \ + ui32_to_extF80 ui64_to_extF80 \ ui64_to_f128, uint-to-float) + +# Conversion Routines: Float to integers +# FIXME: extF80_roundToInt (broken) +check-softfloat-conv-to-int: $(FP_TEST_BIN) $(call test-softfloat, \ f16_to_i32 f16_to_i32_r_minMag \ f32_to_i32 f32_to_i32_r_minMag \
@@ -718,10 +738,12 @@ check-softfloat-conv: $(FP_TEST_BIN) f16_to_ui32 f16_to_ui32_r_minMag \ f32_to_ui32 f32_to_ui32_r_minMag \ f64_to_ui32 f64_to_ui32_r_minMag \ + extF80_to_ui32 extF80_to_ui32_r_minMag \ f128_to_ui32 f128_to_ui32_r_minMag \ f16_to_ui64 f16_to_ui64_r_minMag \ f32_to_ui64 f32_to_ui64_r_minMag \ f64_to_ui64 f64_to_ui64_r_minMag \ + extF80_to_ui64 extF80_to_ui64_r_minMag \ f128_to_ui64 f128_to_ui64_r_minMag, \ float-to-uint) $(call test-softfloat, \
@@ -729,9 +751,14 @@ check-softfloat-conv: $(FP_TEST_BIN) f64_roundToInt f128_roundToInt, \ round-to-integer) +.PHONY: check-softfloat-conv +check-softfloat-conv: check-softfloat-conv-f2f +check-softfloat-conv: check-softfloat-conv-to-float +check-softfloat-conv: check-softfloat-conv-to-int + # Generic rule for all float operations # -# Some patterns are overidden due to broken or missing tests. +# Some patterns are overridden due to broken or missing tests. # Hopefully these can be removed over time. check-softfloat-%: $(FP_TEST_BIN)
Signature · 1 line
2.20.1
Re: [PATCH v1 06/15] tests/fp: split and audit the conversion tests
Quoted 12 lines · Alex Bennée
Split the float conversion tests into separate groups and audit the tests to check what is still broken. I was able to enable a bunch of tests that had been missed before:
all the float to float conversions
ui32_to_extF80
ui64_to_extF80
extF80_to_ui32
extF80_to_ui32_r_minMag
extF80_to_ui64
extF80_to_ui64_r_minMag
Quoted 4 lines
Signed-off-by Alex Bennée <[email protected]>--- tests/Makefile.include | 37 ++++++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-)
r~
PATCH 7/15 tests/tcg: better detect confused gdb which can't connect
In reply to Alex BennéeWhile we may gamely give the right information it can still confuse the wide range of GDBs out there. For example ppc64abi32-linux-user reports:
warning: Selected architecture powerpc:common is not compatible with reported target architecture powerpc:common64
warning: Architecture rejected target-supplied description
but still connects. Add a test for a 0 pc and exit early if that is the case. This may actually be a bug we need to fix?
--- tests/tcg/multiarch/gdbstub/sha1.py | 4 ++++ 1 file changed, 4 insertions(+)
tests/tcg/multiarch/gdbstub/sha1.py +4 -0
@@ -65,6 +65,10 @@ except (gdb.error, AttributeError): print("SKIPPING (not connected)", file=sys.stderr) exit(0) +if gdb.parse_and_eval('$pc') == 0: + print("SKIP: PC not set") + exit(0) + try: # These are not very useful in scripts gdb.execute("set pagination off")
Signature · 1 line
2.20.1
Re: [PATCH v1 07/15] tests/tcg: better detect confused gdb which can't connect
Quoted 7 lines · Alex Bennée
While we may gamely give the right information it can still confuse the wide range of GDBs out there. For example ppc64abi32-linux-user reports:
warning: Selected architecture powerpc:common is not compatible with reported target architecture powerpc:common64
warning: Architecture rejected target-supplied description
Quoted 8 lines
but still connects. Add a test for a 0 pc and exit early if that is the case. This may actually be a bug we need to fix?
Signed-off-by Alex Bennée <[email protected]>Cc Richard Henderson <[email protected]>--- tests/tcg/multiarch/gdbstub/sha1.py | 4 ++++ 1 file changed, 4 insertions(+)
r~
PATCH 8/15 tests/docker: bump fedora to 32
In reply to Alex BennéeWe should be keeping this up to date as Fedora goes out of support quite quickly.
--- tests/docker/dockerfiles/fedora.docker | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tests/docker/dockerfiles/fedora.docker +1 -1
@@ -1,4 +1,4 @@ -FROM fedora:30 +FROM fedora:32 # Please keep this list sorted alphabetically ENV PACKAGES \
Signature · 1 line
2.20.1
Re: [PATCH v1 08/15] tests/docker: bump fedora to 32
Quoted 7 lines · Alex Bennée
We should be keeping this up to date as Fedora goes out of support quite quickly.
Signed-off-by Alex Bennée <[email protected]>--- tests/docker/dockerfiles/fedora.docker | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
r~
PATCH 9/15 tests/docker: add debian11 base image
In reply to Alex BennéeWe won't use this for building QEMU but we do need newer GCC's and binutils for building some of our test cases.
--- tests/docker/Makefile.include | 2 +- tests/docker/dockerfiles/debian11.docker | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-) create mode 100644 tests/docker/dockerfiles/debian11.docker
tests/docker/Makefile.include +1 -1
@@ -7,7 +7,7 @@ HOST_ARCH = $(if $(ARCH),$(ARCH),$(shell uname -m)) DOCKER_SUFFIX := .docker DOCKER_FILES_DIR := $(SRC_PATH)/tests/docker/dockerfiles # we don't run tests on intermediate images (used as base by another image) -DOCKER_PARTIAL_IMAGES := debian9 debian10 +DOCKER_PARTIAL_IMAGES := debian9 debian10 debian11 DOCKER_PARTIAL_IMAGES += debian9-mxe debian-bootstrap DOCKER_IMAGES := $(sort $(notdir $(basename $(wildcard $(DOCKER_FILES_DIR)/*.docker)))) DOCKER_TARGETS := $(patsubst %,docker-image-%,$(DOCKER_IMAGES))
tests/docker/dockerfiles/debian11.docker new file +18 -0
@@ -0,0 +1,18 @@ +# +# Docker multiarch cross-compiler target +# +# This docker target uses the current development version of Debian as +# a base for cross compilers for building test binaries. We won't +# attempt to build QEMU on it yet given it is still in development. +# +# On its own you can't build much but the docker-foo-cross targets +# build on top of the base debian image. +# +FROM debian:bullseye-slim + +# Duplicate deb line as deb-src +RUN cat /etc/apt/sources.list | sed "s/^deb\ /deb-src /" >> /etc/apt/sources.list + +# Install common build utilities +RUN apt update && \ + DEBIAN_FRONTEND=noninteractive apt install -yy eatmydata
Signature · 1 line
2.20.1
Re: [PATCH v1 09/15] tests/docker: add debian11 base image
Quoted 9 lines · Alex Bennée
We won't use this for building QEMU but we do need newer GCC's and binutils for building some of our test cases.
Signed-off-by Alex Bennée <[email protected]>--- tests/docker/Makefile.include | 2 +- tests/docker/dockerfiles/debian11.docker | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-) create mode 100644 tests/docker/dockerfiles/debian11.docker
r~
PATCH 10/15 tests/docker: use a gcc-10 based image for arm64 tests
In reply to Alex BennéeAs we enable newer features that we want to test on arm64 targets we need newer compilers. Split off a new debian-arm64-test-cross image which we can use to build these new tests.
--- tests/docker/Makefile.include | 2 ++ .../dockerfiles/debian-arm64-test-cross.docker | 13 +++++++++++++ tests/tcg/configure.sh | 4 ++-- 3 files changed, 17 insertions(+), 2 deletions(-) create mode 100644 tests/docker/dockerfiles/debian-arm64-test-cross.docker
tests/docker/Makefile.include +2 -0
@@ -131,9 +131,11 @@ docker-image-travis: NOUSER=1 # Specialist build images, sometimes very limited tools docker-image-tricore-cross: docker-image-debian9 +docker-image-debian-arm64-test-cross: docker-image-debian11 # These images may be good enough for building tests but not for test builds DOCKER_PARTIAL_IMAGES += debian-alpha-cross +DOCKER_PARTIAL_IMAGES += debian-arm64-test-cross DOCKER_PARTIAL_IMAGES += debian-hppa-cross DOCKER_PARTIAL_IMAGES += debian-m68k-cross debian-mips64-cross DOCKER_PARTIAL_IMAGES += debian-powerpc-cross debian-ppc64-cross
tests/docker/dockerfiles/debian-arm64-test-cross.docker new file +13 -0
@@ -0,0 +1,13 @@ +# +# Docker arm64 cross-compiler target (tests only) +# +# This docker target builds on the debian Bullseye base image. +# +FROM qemu:debian11 + +# Add the foreign architecture we want and install dependencies +RUN dpkg --add-architecture arm64 +RUN apt update && \ + DEBIAN_FRONTEND=noninteractive eatmydata \ + apt install -y --no-install-recommends \ + crossbuild-essential-arm64 gcc-10-aarch64-linux-gnu
tests/tcg/configure.sh +2 -2
@@ -97,8 +97,8 @@ for target in $target_list; do case $target in aarch64-*) # We don't have any bigendian build tools so we only use this for AArch64 - container_image=debian-arm64-cross - container_cross_cc=aarch64-linux-gnu-gcc + container_image=debian-arm64-test-cross + container_cross_cc=aarch64-linux-gnu-gcc-10 ;; alpha-*) container_image=debian-alpha-cross
Signature · 1 line
2.20.1
Re: [PATCH v1 10/15] tests/docker: use a gcc-10 based image for arm64 tests
Quoted 11 lines · Alex Bennée
As we enable newer features that we want to test on arm64 targets we need newer compilers. Split off a new debian-arm64-test-cross image which we can use to build these new tests.
Signed-off-by Alex Bennée <[email protected]>--- tests/docker/Makefile.include | 2 ++ .../dockerfiles/debian-arm64-test-cross.docker | 13 +++++++++++++ tests/tcg/configure.sh | 4 ++-- 3 files changed, 17 insertions(+), 2 deletions(-) create mode 100644 tests/docker/dockerfiles/debian-arm64-test-cross.docker
r~
PATCH 11/15 tests/tcg/aarch64: Add bti smoke test
In reply to Alex BennéeFrom: Richard Henderson <[email protected]>
Requires gcc 10 for -mbranch-protection=standard.
Message-Id: <[email protected]>
--- tests/tcg/aarch64/bti-1.c | 62 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/bti-crt.inc.c | 51 +++++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 9 +++++ tests/tcg/configure.sh | 4 ++ 4 files changed, 126 insertions(+) create mode 100644 tests/tcg/aarch64/bti-1.c create mode 100644 tests/tcg/aarch64/bti-crt.inc.c
tests/tcg/aarch64/bti-1.c new file +62 -0
@@ -0,0 +1,62 @@ +/* +* Branch target identification, basic notskip cases. +*/ + +#include "bti-crt.inc.c" + +static void skip2_sigill (int sig,siginfo_t *info,ucontext_t *uc) +{ + uc->uc_mcontext.pc +=8 ; + uc->uc_mcontext.pstate =1 ; +} + +#define NOP "nop" +#define BTI_N "hint #32" +#define BTI_C "hint #34" +#define BTI_J "hint #36" +#define BTI_JC "hint #38" + +#define BTYPE_1 (DEST ) \ + asm("mov %0,#1; adr x16, 1f; br x16; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x16") + +#define BTYPE_2 (DEST ) \ + asm("mov %0,#1; adr x16, 1f; blr x16; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x16", "x30") + +#define BTYPE_3 (DEST ) \ + asm("mov %0,#1; adr x15, 1f; br x15; 1: " DEST "; mov %0,#0" \ + : "=r"(skipped) : : "x15") + +#define TEST (WHICH ,DEST ,EXPECT ) \ + do { WHICH(DEST); fail += skipped ^ EXPECT; } while (0) + + +int main () +{ +int fail =0 ; +int skipped; + +/* Signal-like with SA_SIGINFO. */ +signal_info (SIGILL , skip2_sigill); + +TEST (BTYPE_1 ,NOP ,1 ); +TEST (BTYPE_1 ,BTI_N ,1 ); +TEST (BTYPE_1 ,BTI_C ,0 ); +TEST (BTYPE_1 ,BTI_J ,0 ); +TEST (BTYPE_1 ,BTI_JC ,0 ); + +TEST (BTYPE_2 ,NOP ,1 ); +TEST (BTYPE_2 ,BTI_N ,1 ); +TEST (BTYPE_2 ,BTI_C ,0 ); +TEST (BTYPE_2 ,BTI_J ,1 ); +TEST (BTYPE_2 ,BTI_JC ,0 ); + +TEST (BTYPE_3 ,NOP ,1 ); +TEST (BTYPE_3 ,BTI_N ,1 ); +TEST (BTYPE_3 ,BTI_C ,1 ); +TEST (BTYPE_3 ,BTI_J ,0 ); +TEST (BTYPE_3 ,BTI_JC ,0 ); + +return fail; +}
tests/tcg/aarch64/bti-crt.inc.c new file +51 -0
51 lines not on this page · raw message
tests/tcg/aarch64/Makefile.target +9 -0
@@ -24,6 +24,15 @@ run-pauth-%: QEMU_OPTS += -cpu max pauth-%: CFLAGS += -march=armv8.3-a endif +# We need binutils-2.32 to link this test case without warnings. +# And if we know that we have 2.32, we also don't need the linker script. +# In the meantime, disable the test by default. +ifneq ($(DOCKER_IMAGE)$(CROSS_CC_HAS_ARMV8_BTI),) +AARCH64_TESTS += bti-1 +bti-%: CFLAGS += -mbranch-protection=standard +bti-1: LDFLAGS += -nostdlib +endif + # Semihosting smoke test for linux-user AARCH64_TESTS += semihosting run-semihosting: semihosting
tests/tcg/configure.sh +4 -0
@@ -231,6 +231,10 @@ for target in $target_list; do -march=armv8.3-a -o $TMPE $TMPC; then echo "CROSS_CC_HAS_ARMV8_3=y" >> $config_target_mak fi + if do_compiler "$target_compiler" $target_compiler_cflags \ + -mbranch-protection=standard -o $TMPE $TMPC; then + echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak + fi ;; esac
Signature · 1 line
2.20.1
Re: [PATCH v1 11/15] tests/tcg/aarch64: Add bti smoke test
Quoted 8 lines · Alex Bennée
From: Richard Henderson <[email protected]>
Requires gcc 10 for -mbranch-protection=standard.
Signed-off-by Richard Henderson <[email protected]>Message-Id: <[email protected]>
[AJB: add CROSS_CC_HAS_ARMV8_BTI check]Signed-off-by Alex Bennée <[email protected]>
Quoted 8 lines
--- tests/tcg/aarch64/bti-1.c | 62 +++++++++++++++++++++++++++++++ tests/tcg/aarch64/bti-crt.inc.c | 51 +++++++++++++++++++++++++ tests/tcg/aarch64/Makefile.target | 9 +++++ tests/tcg/configure.sh | 4 ++ 4 files changed, 126 insertions(+) create mode 100644 tests/tcg/aarch64/bti-1.c create mode 100644 tests/tcg/aarch64/bti-crt.inc.c
This should be dropped from this patch set. I have adjusted it and it and posted as
https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg05891.html
r~
PATCH 12/15 cpus-common: ensure auto-assigned cpu_indexes don't clash
In reply to Alex BennéeBasing the cpu_index on the number of currently allocated vCPUs fails when vCPUs aren't removed in a LIFO manner. This is especially true when we are allocating a cpu_index for each guest thread in linux-user where there is no ordering constraint on their allocation and de-allocation.
[I've dropped the assert which is there to guard against out-of-order removal as this should probably be caught higher up the stack. Maybe we could just ifdef CONFIG_SOFTTMU it?]
---
v2
- slightly tweak the index algorithm to preserve cpu_index = 0
--- cpus-common.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
cpus-common.c +5 -5
@@ -61,13 +61,15 @@ static bool cpu_index_auto_assigned;static int cpu_get_free_index (void ) {CPUState *some_cpu; -int cpu_index =0 ; +int max_cpu_index =0 ; cpu_index_auto_assigned = true;CPU_FOREACH (some_cpu) { - cpu_index++; +if (some_cpu->cpu_index >= max_cpu_index) { + max_cpu_index = some_cpu->cpu_index +1 ; + } } -return cpu_index; +return max_cpu_index; }void cpu_list_add (CPUState *cpu)
@@ -90,8 +92,6 @@ void cpu_list_remove(CPUState *cpu)return ; } -assert (!(cpu_index_auto_assigned && cpu !=QTAILQ_LAST (&cpus))); -QTAILQ_REMOVE_RCU (&cpus, cpu, node); cpu->cpu_index =UNASSIGNED_CPU_INDEX ; }
Signature · 1 line
2.20.1
Re: [PATCH v1 12/15] cpus-common: ensure auto-assigned cpu_indexes don't clash
Quoted 16 lines · Alex Bennée
Basing the
cpu_indexon the number of currently allocated vCPUs fails when vCPUs aren't removed in a LIFO manner. This is especially true when we are allocating acpu_indexfor each guest thread in linux-user where there is no ordering constraint on their allocation and de-allocation.[I've dropped the assert which is there to guard against out-of-order removal as this should probably be caught higher up the stack. Maybe we could just ifdef
CONFIG_SOFTTMUit?]Signed-off-by Alex Bennée <[email protected]>Cc Nikolay Igotti <[email protected]>Cc Paolo Bonzini <[email protected]>Cc Igor Mammedov <[email protected]>Cc Eduardo Habkost <[email protected]>
Quoted 6 lines
---
v2
- slightly tweak the index algorithm to preservecpu_index= 0--- cpus-common.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
r~
PATCH 13/15 linux-user: properly "unrealize" vCPU object
In reply to Alex BennéeWe shouldn't be messing around with the CPU list in linux-user save for the very special case of do_fork(). When threads end we need to properly follow QOM object lifetime handling and allow the eventual cpu_common_unrealizefn to both remove the CPU and ensure any clean-up actions are taken place, for example calling plugin exit hooks.
There is still a race condition to avoid so use the linux-user specific clone_lock instead of the cpu_list_lock to avoid it.
---
v2
- expand Cc list to QOM/QMP object lifetime experts
--- linux-user/syscall.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)
linux-user/syscall.c +11 -8
@@ -7635,30 +7635,33 @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1,return -TARGET_ERESTARTSYS ; } -cpu_list_lock (); +pthread_mutex_lock (&clone_lock);if (CPU_NEXT (first_cpu)) { -TaskState *ts; +TaskState *ts = cpu->opaque; -/* Remove the CPU from the list. */ -QTAILQ_REMOVE_RCU (&cpus, cpu, node); +object_property_set_bool (OBJECT (cpu), false,"realized" ,NULL ); +object_unref (OBJECT (cpu)); +/* +* At this point the CPU should be unrealized and removed +* from cpu lists. We can clean-up the rest of the thread +* data without the lock held. +*/ -cpu_list_unlock (); +pthread_mutex_unlock (&clone_lock); - ts = cpu->opaque;if (ts->child_tidptr) {put_user_u32 (0 , ts->child_tidptr);do_sys_futex (g2h (ts->child_tidptr),FUTEX_WAKE ,INT_MAX ,NULL ,NULL ,0 ); } thread_cpu =NULL ; -object_unref (OBJECT (cpu));g_free (ts);rcu_unregister_thread ();pthread_exit (NULL ); } -cpu_list_unlock (); +pthread_mutex_unlock (&clone_lock);preexit_cleanup (cpu_env, arg1);_exit (arg1);return 0 ;/* avoid warning */
Signature · 1 line
2.20.1
PATCH 14/15 tests/tcg: add new threadcount test
In reply to Alex BennéeBased on the original testcase by Nikolay Igotti.
Message-ID: <CAEme+7GLKg_dNsHizzTKDymX9HyD+Ph2iZ=WKhOw2XG+zhViXg@mail.gmail.com>
---
v2
- add Nikolay's s-o-b
- checkpatch fixes
--- tests/tcg/multiarch/threadcount.c | 64 +++++++++++++++++++++++++++++ tests/tcg/multiarch/Makefile.target | 2 + 2 files changed, 66 insertions(+) create mode 100644 tests/tcg/multiarch/threadcount.c
tests/tcg/multiarch/threadcount.c new file +64 -0
@@ -0,0 +1,64 @@ +/* +* Thread Exerciser +* +* Unlike testthread which is mainly concerned about testing thread +* semantics this test is used to exercise the thread creation and +* accounting. A version of this test found a problem with clashing +* cpu_indexes which caused a break in plugin handling. +* +* Based on the original test case by Nikolay Igotti. +* +* Copyright (c) 2020 Linaro Ltd +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <pthread.h> + +int max_threads =10 ; + +typedef struct { +int delay; +}ThreadArg ; + +static void *thread_fn (void * varg) +{ +ThreadArg *arg = varg; +usleep (arg->delay); +free (arg); +return NULL ; +} + +int main (int argc,char **argv) +{ +int i; +pthread_t *threads; + +if (argc >1 ) { + max_threads =atoi (argv[1 ]); + } + threads =calloc (sizeof (pthread_t), max_threads); + +for (i =0 ; i < max_threads; i++) { +ThreadArg *arg =calloc (sizeof (ThreadArg),1 ); + arg->delay = i *100 ; +pthread_create (threads + i,NULL , thread_fn, arg); + } + +printf ("Created %d threads\n" , max_threads); + +/* sleep until roughly half the threads have "finished" */ +usleep (max_threads *50 ); + +for (i =0 ; i < max_threads; i++) { +pthread_join (threads[i],NULL ); + } + +printf ("Done\n" ); + +return 0 ; +}
tests/tcg/multiarch/Makefile.target +2 -0
@@ -28,6 +28,8 @@ run-float_%: float_% testthread: LDFLAGS+=-lpthread +threadcount: LDFLAGS+=-lpthread + # We define the runner for test-mmap after the individual # architectures have defined their supported pages sizes. If no # additional page sizes are defined we only run the default test.
Signature · 1 line
2.20.1
PATCH 15/15 plugins: new lockstep plugin for debugging TCG changes
In reply to Alex BennéeWhen we make changes to the TCG we sometimes cause regressions that are deep into the execution cycle of the guest. Debugging this often requires comparing large volumes of trace information to figure out where behaviour has diverged.
The lockstep plugin utilises a shared socket so two QEMU's running with the plugin will write their current execution position and wait to receive the position of their partner process. When execution diverges the plugins output where they were and the previous few blocks before unloading themselves and letting execution continue.
Originally I planned for this to be most useful with -icount but it turns out you can get divergence pretty quickly due to asynchronous qemu_cpu_kick_rr_cpus() events causing one side to eventually run into a short block a few cycles before the other side. For this reason I've added a bit of tracking and I think the divergence reporting could be finessed to report only if we really start to diverge in execution.
An example run would be:
qemu-system-sparc -monitor none -parallel none -net none \
-M SS-20 -m 256 -kernel day11/zImage.elf \
-plugin ./tests/plugin/liblockstep.so,arg=lockstep-sparc.sock \
-d plugin,nochainwith an identical command in another window in the same working directory.
Message-Id: <[email protected]>
---
v3
- added verbose flag
- basic heuristics to detect "real" divergence
- checkpatch tweaks
--- tests/plugin/lockstep.c | 340 ++++++++++++++++++++++++++++++++++++++ tests/plugin/Makefile | 1 + tests/tcg/Makefile.target | 2 +- 3 files changed, 342 insertions(+), 1 deletion(-) create mode 100644 tests/plugin/lockstep.c
tests/plugin/lockstep.c new file +340 -0
@@ -0,0 +1,340 @@ +/* +* Lockstep Execution Plugin +* +* Allows you to execute two QEMU instances in lockstep and report +* when their execution diverges. This is mainly useful for developers +* who want to see where a change to TCG code generation has +* introduced a subtle and hard to find bug. +* +* Caveats: +* - single-threaded linux-user apps only with non-deterministic syscalls +* - no MTTCG enabled system emulation (icount may help) +* +* While icount makes things more deterministic it doesn't mean a +* particular run may execute the exact same sequence of blocks. An +* asynchronous event (for example X11 graphics update) may cause a +* block to end early and a new partial block to start. This means +* serial only test cases are a better bet. -d nochain may also help. +* +* This code is not thread safe! +* +* Copyright (c) 2020 Linaro Ltd +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include <glib.h> +#include <inttypes.h> +#include <unistd.h> +#include <sys/socket.h> +#include <sys/un.h> +#include <stdio.h> +#include <errno.h> + +#include <qemu-plugin.h> + +QEMU_PLUGIN_EXPORT int qemu_plugin_version = QEMU_PLUGIN_VERSION; + +/* saved so we can uninstall later */ +static qemu_plugin_id_t our_id; + +static unsigned long bb_count; +static unsigned long insn_count; + +/* Information about a translated block */ +typedef struct { +uint64_t pc; +uint64_t insns; +}BlockInfo ; + +/* Information about an execution state in the log */ +typedef struct { +BlockInfo *block; +unsigned long insn_count; +unsigned long block_count; +}ExecInfo ; + +/* The execution state we compare */ +typedef struct { +uint64_t pc; +unsigned long insn_count; +}ExecState ; + +typedef struct { +GSList *log_pos; +int distance; +}DivergeState ; + +/* list of translated block info */ +static GSList *blocks; + +/* execution log and points of divergence */ +static GSList *log, *divergence_log; + +static int socket_fd; +static char *path_to_unlink; + +static bool verbose; + +static void plugin_cleanup (qemu_plugin_id_t id) +{ +/* Free our block data */ +g_slist_free_full (blocks, &g_free); +g_slist_free_full (log, &g_free); +g_slist_free (divergence_log); + +close (socket_fd); +if (path_to_unlink) { +unlink (path_to_unlink); + } +} + +static void plugin_exit (qemu_plugin_id_t id,void *p) +{ +g_autoptr (GString) out =g_string_new ("No divergence :-)\n" ); +g_string_append_printf (out,"Executed %ld/%d blocks\n" , + bb_count,g_slist_length (log)); +g_string_append_printf (out,"Executed ~%ld instructions\n" , insn_count); +qemu_plugin_outs (out->str); + +plugin_cleanup (id); +} + +static void report_divergance (ExecState *us,ExecState *them) +{ +DivergeState divrec = { log,0 }; +g_autoptr (GString) out =g_string_new ("" ); +bool diverged = false; + +/* +* If we have diverged before did we get back on track or are we +* totally loosing it? +*/ +if (divergence_log) { +DivergeState *last = (DivergeState *) divergence_log->data; +GSList *entry; + +for (entry = log;g_slist_next (entry); entry =g_slist_next (entry)) { +if (entry == last->log_pos) { +break ; + } + divrec.distance++; + } + +/* +* If the last two records are so close it is likely we will +* not recover synchronisation with the other end. +*/ +if (divrec.distance ==1 && last->distance ==1 ) { + diverged = true; + } + } + divergence_log =g_slist_prepend (divergence_log, +g_memdup (&divrec,sizeof (divrec))); + +/* Output short log entry of going out of sync... */ +if (verbose || divrec.distance ==1 || diverged) { +g_string_printf (out,"@ %#016lx vs %#016lx (%d/%d since last)\n" , + us->pc, them->pc,g_slist_length (divergence_log), + divrec.distance); +qemu_plugin_outs (out->str); + } + +if (diverged) { +int i; +GSList *entry; + +g_string_printf (out,"Δ insn_count @ %#016lx (%ld) vs %#016lx (%ld)\n" , + us->pc, us->insn_count, them->pc, them->insn_count); + +for (entry = log, i =0 ; +g_slist_next (entry) && i <5 ; + entry =g_slist_next (entry), i++) { +ExecInfo *prev = (ExecInfo *) entry->data; +g_string_append_printf (out, +" previously @ %#016lx/%ld (%ld insns)\n" , + prev->block->pc, prev->block->insns, + prev->insn_count); + } +qemu_plugin_outs (out->str); +qemu_plugin_outs ("too much divergence... giving up." ); +qemu_plugin_uninstall (our_id, plugin_cleanup); + } +} + +static void vcpu_tb_exec (unsigned int cpu_index,void *udata) +{ +BlockInfo *bi = (BlockInfo *) udata; +ExecState us, them; +ssize_t bytes; +ExecInfo *exec; + + us.pc = bi->pc; + us.insn_count = insn_count; + +/* +* Write our current position to the other end. If we fail the +* other end has probably died and we should shut down gracefully. +*/ + bytes =write (socket_fd, &us,sizeof (ExecState)); +if (bytes <sizeof (ExecState)) { +qemu_plugin_outs (bytes <0 ? +"problem writing to socket" : +"wrote less than expected to socket" ); +qemu_plugin_uninstall (our_id, plugin_cleanup); +return ; + } + +/* +* Now read where our peer has reached. Again a failure probably +* indicates the other end died and we should close down cleanly. +*/ + bytes =read (socket_fd, &them,sizeof (ExecState)); +if (bytes <sizeof (ExecState)) { +qemu_plugin_outs (bytes <0 ? +"problem reading from socket" : +"read less than expected" ); +qemu_plugin_uninstall (our_id, plugin_cleanup); +return ; + } + +/* +* Compare and report if we have diverged. +*/ +if (us.pc != them.pc) { +report_divergance (&us, &them); + } + +/* +* Assume this block will execute fully and record it +* in the execution log. +*/ + insn_count += bi->insns; + bb_count++; + exec =g_new0 (ExecInfo,1 ); + exec->block = bi; + exec->insn_count = insn_count; + exec->block_count = bb_count; + log =g_slist_prepend (log, exec); +} + +static void vcpu_tb_trans (qemu_plugin_id_t id,struct qemu_plugin_tb *tb) +{ +BlockInfo *bi =g_new0 (BlockInfo,1 ); + bi->pc =qemu_plugin_tb_vaddr (tb); + bi->insns =qemu_plugin_tb_n_insns (tb); + +/* save a reference so we can free later */ + blocks =g_slist_prepend (blocks, bi); +qemu_plugin_register_vcpu_tb_exec_cb (tb, vcpu_tb_exec, +QEMU_PLUGIN_CB_NO_REGS , (void *)bi); +} + + +/* +* Instead of encoding master/slave status into what is essentially +* two peers we shall just take the simple approach of checking for +* the existence of the pipe and assuming if it's not there we are the +* first process. +*/ +static bool setup_socket (const char *path) +{ +struct sockaddr_un sockaddr; +int fd; + + fd =socket (AF_UNIX ,SOCK_STREAM ,0 ); +if (fd <0 ) { +perror ("create socket" ); +return false; + } + + sockaddr.sun_family =AF_UNIX ; +g_strlcpy (sockaddr.sun_path, path,sizeof (sockaddr.sun_path) -1 ); +if (bind (fd, (struct sockaddr *)&sockaddr,sizeof (sockaddr)) <0 ) { +perror ("bind socket" ); +close (fd); +return false; + } + +/* remember to clean-up */ + path_to_unlink =g_strdup (path); + +if (listen (fd,1 ) <0 ) { +perror ("listen socket" ); +close (fd); +return false; + } + + socket_fd =accept (fd,NULL ,NULL ); +if (socket_fd <0 && errno !=EINTR ) { +perror ("accept socket" ); +return false; + } + +qemu_plugin_outs ("setup_socket::ready\n" ); + +return true; +} + +static bool connect_socket (const char *path) +{ +int fd; +struct sockaddr_un sockaddr; + + fd =socket (AF_UNIX ,SOCK_STREAM ,0 ); +if (fd <0 ) { +perror ("create socket" ); +return false; + } + + sockaddr.sun_family =AF_UNIX ; +g_strlcpy (sockaddr.sun_path, path,sizeof (sockaddr.sun_path) -1 ); + +if (connect (fd, (struct sockaddr *)&sockaddr,sizeof (sockaddr)) <0 ) { +perror ("failed to connect" ); +return false; + } + +qemu_plugin_outs ("connect_socket::ready\n" ); + + socket_fd = fd; +return true; +} + +static bool setup_unix_socket (const char *path) +{ +if (g_file_test (path,G_FILE_TEST_EXISTS )) { +return connect_socket (path); + }else { +return setup_socket (path); + } +} + + +QEMU_PLUGIN_EXPORT int qemu_plugin_install(qemu_plugin_id_t id, +const qemu_info_t *info, +int argc,char **argv) +{ +int i; + +if (!argc || !argv[0 ]) { +qemu_plugin_outs ("Need a socket path to talk to other instance." ); +return -1 ; + } + +for (i =0 ; i < argc; i++) { +char *p = argv[i]; +if (strcmp (p,"verbose" ) ==0 ) { + verbose = true; + }else if (!setup_unix_socket (argv[0 ])) { +qemu_plugin_outs ("Failed to setup socket for communications." ); +return -1 ; + } + } + + our_id = id; + +qemu_plugin_register_vcpu_tb_trans_cb (id, vcpu_tb_trans); +qemu_plugin_register_atexit_cb (id, plugin_exit,NULL ); +return 0 ; +}
tests/plugin/Makefile +1 -0
@@ -13,6 +13,7 @@ NAMES += mem NAMES += hotblocks NAMES += howvec NAMES += hotpages +NAMES += lockstep SONAMES := $(addsuffix .so,$(addprefix lib,$(NAMES)))
tests/tcg/Makefile.target +1 -1
@@ -128,7 +128,7 @@ RUN_TESTS=$(patsubst %,run-%, $(TESTS)) ifeq ($(CONFIG_PLUGIN),y) PLUGIN_DIR=../../plugin VPATH+=$(PLUGIN_DIR) -PLUGINS=$(notdir $(wildcard $(PLUGIN_DIR)/*.so)) +PLUGINS=$(filter-out liblockstep.so,$(notdir $(wildcard $(PLUGIN_DIR)/*.so))) # We need to ensure expand the run-plugin-TEST-with-PLUGIN # pre-requistes manually here as we can't use stems to handle it. We
Signature · 1 line
2.20.1
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series failed the asan build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
export ARCH=x86_64
make docker-image-fedora V=1 NETWORK=1
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1 === TEST SCRIPT END ===
perl-Encode-devel x86_64 4:3.06-445.fc32 updates 42 k perl-Env noarch 1.04-440.fc32 fedora 19 k perl-Errno x86_64 1.30-452.fc32 fedora 24 k perl-Error noarch 1:0.17029-1.fc32 fedora 42 k perl-Exporter noarch 5.74-2.fc32 fedora 32 k perl-Exporter-Tiny noarch 1.002001-5.fc32 fedora 51 k perl-ExtUtils-CBuilder noarch 1:0.280234-2.fc32 fedora 47 k --- (497/699): perl-Env-1.04-440.fc32.noarch.rpm 198 kB/s | 19 kB 00:00 (498/699): perl-Digest-SHA-6.02-442.fc32.x86_64 325 kB/s | 64 kB 00:00 (499/699): perl-Errno-1.30-452.fc32.x86_64.rpm 245 kB/s | 24 kB 00:00 (500/699): perl-Error-0.17029-1.fc32.noarch.rpm 415 kB/s | 42 kB 00:00 (501/699): perl-Exporter-5.74-2.fc32.noarch.rpm 318 kB/s | 32 kB 00:00 (502/699): perl-Exporter-Tiny-1.002001-5.fc32.n 497 kB/s | 51 kB 00:00 (503/699): perl-ExtUtils-CBuilder-0.280234-2.fc 455 kB/s | 47 kB 00:00 --- Installing : perl-DB_File-1.853-2.fc32.x86_64 175/700 Installing : perl-Devel-Size-0.83-5.fc32.x86_64 176/700 Installing : perl-Env-1.04-440.fc32.noarch 177/700 Installing : perl-Error-1:0.17029-1.fc32.noarch 178/700 Installing : perl-ExtUtils-MM-Utils-2:7.44-2.fc32.noarch 179/700 Installing : perl-IPC-SysV-2.07-442.fc32.x86_64 180/700 Installing : perl-IPC-System-Simple-1.30-1.fc32.noarch 181/700 --- Verifying : perl-Encode-Locale-1.05-15.fc32.noarch 497/700 Verifying : perl-Env-1.04-440.fc32.noarch 498/700 Verifying : perl-Errno-1.30-452.fc32.x86_64 499/700 Verifying : perl-Error-1:0.17029-1.fc32.noarch 500/700 Verifying : perl-Exporter-5.74-2.fc32.noarch 501/700 Verifying : perl-Exporter-Tiny-1.002001-5.fc32.noarch 502/700 Verifying : perl-ExtUtils-CBuilder-1:0.280234-2.fc32.noarch 503/700
---
perl-Encode-devel-4:3.06-445.fc32.x86_64
perl-Env-1.04-440.fc32.noarch
perl-Errno-1.30-452.fc32.x86_64
perl-Error-1:0.17029-1.fc32.noarch
perl-Exporter-5.74-2.fc32.noarch
perl-Exporter-Tiny-1.002001-5.fc32.noarch
perl-ExtUtils-CBuilder-1:0.280234-2.fc32.noarch
---
CC backends/tpm.o
CC backends/hostmem.o
CC backends/hostmem-ram.o
/tmp/qemu-test/src/audio/mixeng.c:274:34: error: implicit conversion from 'unsigned int' to 'float' changes value from 4294967295 to 4294967296 [-Werror,-Wimplicit-int-float-conversion]
static const float float_scale = UINT_MAX / 2.f;
^~~~~~~~ ~
/usr/lib64/clang/10.0.0/include/limits.h:56:37: note: expanded from macro 'UINT_MAX'
#define UINT_MAX (__INT_MAX__ *2U +1U)
~~~~~~~~~~~~~~~~~^~~1 error generated.
make: *** [/tmp/qemu-test/src/rules.mak:69: audio/mixeng.o] Error 1
make: *** Waiting for unfinished jobs....
Traceback (most recent call last):
File "./tests/docker/docker.py", line 664, in <module>
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=07d8739029c2460480f2e8f49878e61e', '-u', '1003', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=x86_64-softmmu', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew2/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-juuwuycm/src/docker-src.2020-05-20-12.32.55.601:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-debug']' returned non-zero exit status 2. filter=--filter=label=com.qemu.instance.uuid=07d8739029c2460480f2e8f49878e61e
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-juuwuycm/src'
make: *** [docker-run-test-debug@fedora] Error 2
real 4m16.571s
user 0m9.425s
The full log is available at
http://patchew.org/logs/[email protected]/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series seems to have some coding style problems. See output below for more information:
Message-id: [email protected]
Subject: [PATCH v1 00/15] testing and plugin updates
Type: series
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Switched to a new branch 'test'
a1f3009 plugins: new lockstep plugin for debugging TCG changes f8ab9f1 tests/tcg: add new threadcount test
bbaf5c2 linux-user: properly "unrealize" vCPU object 8d602ed cpus-common: ensure auto-assigned cpu_indexes don't clash a31d8dd tests/tcg/aarch64: Add bti smoke test
46efafc tests/docker: use a gcc-10 based image for arm64 tests c62d664 tests/docker: add debian11 base image
c5590fe tests/docker: bump fedora to 32
5eea6f1 tests/tcg: better detect confused gdb which can't connect 63db898 tests/fp: split and audit the conversion tests d484715 tests/fp: enable extf80_le_quite tests
da123f1 tests/tcg: fix invocation of the memory record/replay tests 0667cc3 travis.yml: Use clang++ in the Clang tests 03334db tests/vm: pass --genisoimage to basevm script f49c9ff configure: add alternate binary for genisoimage
=== OUTPUT BEGIN ===
1/15 Checking commit f49c9ff28400 (configure: add alternate binary for genisoimage) 2/15 Checking commit 03334db3deeb (tests/vm: pass --genisoimage to basevm script) 3/15 Checking commit 0667cc3737a6 (travis.yml: Use clang++ in the Clang tests) 4/15 Checking commit da123f1fc347 (tests/tcg: fix invocation of the memory record/replay tests) 5/15 Checking commit d484715faabe (tests/fp: enable extf80_le_quite tests)
6/15 Checking commit 63db8983c952 (tests/fp: split and audit the conversion tests) 7/15 Checking commit 5eea6f17d0e4 (tests/tcg: better detect confused gdb which can't connect) 8/15 Checking commit c5590fe1a910 (tests/docker: bump fedora to 32)
9/15 Checking commit c62d664e2b07 (tests/docker: add debian11 base image)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#27:
new file mode 100644
total: 0 errors, 1 warnings, 26 lines checked
Patch 9/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
10/15 Checking commit 46efafc4e520 (tests/docker: use a gcc-10 based image for arm64 tests)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #31:
new file mode 100644
total: 0 errors, 1 warnings, 34 lines checked
Patch 10/15 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
11/15 Checking commit a31d8ddc748b (tests/tcg/aarch64: Add bti smoke test)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #36:
new file mode 100644
ERROR: externs should be avoided in .c files
#121: FILE: tests/tcg/aarch64/bti-crt.inc.c:13:
+int main(void);
total: 1 errors, 1 warnings, 138 lines checked
Patch 11/15 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
12/15 Checking commit 8d602ed77a25 (cpus-common: ensure auto-assigned cpu_indexes don't clash) 13/15 Checking commit bbaf5c2f62be (linux-user: properly "unrealize" vCPU object) 14/15 Checking commit f8ab9f1fcc96 (tests/tcg: add new threadcount test)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#29:
new file mode 100644
total: 0 errors, 1 warnings, 72 lines checked
Patch 14/15 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
15/15 Checking commit a1f3009ce1f2 (plugins: new lockstep plugin for debugging TCG changes)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #55:
new file mode 100644
total: 0 errors, 1 warnings, 355 lines checked
Patch 15/15 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]