Skip to contentSkip to conversation

trying duplication and then rsa_en/decrypt

tpm2 ted.h.kim at oracle.com 2 participants 13 messages May 20, 2020 – May 21, 2020

lore
Share & tools
lore

ted.h.kim at oracle.com

#0 lore raw

Folks,

Sorry for what is probably an obvious question ...

I tried the examples in the tpm2_duplicate(1) and tpm2_policyduplicationselect(1) man pages. Afterwards, I just wanted to try out the duplicated keys. So I tried tpm2_rsaencrypt followed by tpm2_rsadecrypt. But when doing the latter, I got:

WARNING:esys:src/tss2-esys/api/Esys_RSA_Decrypt.c:305:Esys_RSA_Decrypt_Finish() Received TPM Error ERROR:esys:src/tss2-esys/api/Esys_RSA_Decrypt.c:102:Esys_RSA_Decrypt() Esys Finish ErrorCode (0x0000012f)
ERROR: Esys_RSA_Decrypt(0x12F) - tpm:error(2.0): authValue or authPolicy is not available for selected entity
ERROR: Unable to run tpm2_rsadecrypt

Which I guess means I didn't satisfy the policy for the object. But if I try to run tpm2_startauthsession like those man page examples show, I get this error:

WARNING:esys:src/tss2-esys/api/Esys_RSA_Decrypt.c:305:Esys_RSA_Decrypt_Finish() Received TPM Error ERROR:esys:src/tss2-esys/api/Esys_RSA_Decrypt.c:102:Esys_RSA_Decrypt() Esys Finish ErrorCode (0x000009a4)
ERROR: Esys_RSA_Decrypt(0x9A4) - tpm:session(1):the commandCode in the policy is not the commandCode of the command or the command code in a policy command references a command that is not implemented
ERROR: Unable to run tpm2_rsadecrypt

And so, I am confused now about what I need to do to get these duplicated keys to work with tpm2_rsadecrypt.

Thanks,
-ted

Signature · 3 lines
Ted H. Kim, PhD
ted.h.kim(a)oracle.com
+1 310-258-7515
#1 lore raw

+ Imran,

Can you help him out?
Also, can you add to the manpages so theirs examples of using the duplicated key?

Quoted 57 lines

-----Original Message-----
From: ted.h.kim(a)oracle.com [mailto:ted.h.kim(a)oracle.com]
Sent: Tuesday, May 19, 2020 8:10 PM
To: tpm2(a)lists.01.org
Subject: [tpm2] trying duplication and then rsa_en/decrypt

Folks,

Sorry for what is probably an obvious question ...

I tried the examples in the tpm2_duplicate(1) and tpm2_policyduplicationselect(1) man pages. Afterwards, I just wanted to try out the duplicated keys. So I tried tpm2_rsaencrypt followed by tpm2_rsadecrypt. But when doing the latter, I got:

WARNING:esys:src/tss2- esys/api/Esys_RSA_Decrypt.c:305:Esys_RSA_Decrypt_Finish()
Received TPM Error ERROR:esys:src/tss2-esys/api/Esys_RSA_Decrypt.c:102:Esys_RSA_Decrypt() Esys Finish ErrorCode (0x0000012f)
ERROR: Esys_RSA_Decrypt(0x12F) - tpm:error(2.0): authValue or authPolicy is not available for selected entity
ERROR: Unable to run tpm2_rsadecrypt

Which I guess means I didn't satisfy the policy for the object. But if I try to run tpm2_startauthsession like those man page examples show, I get this error:

WARNING:esys:src/tss2- esys/api/Esys_RSA_Decrypt.c:305:Esys_RSA_Decrypt_Finish() Received TPM Error ERROR:esys:src/tss2-esys/api/Esys_RSA_Decrypt.c:102:Esys_RSA_Decrypt() Esys Finish ErrorCode (0x000009a4)
ERROR: Esys_RSA_Decrypt(0x9A4) - tpm:session(1):the commandCode in the policy is not the commandCode of the command or the command code in a policy command references a command that is not implemented
ERROR: Unable to run tpm2_rsadecrypt

And so, I am confused now about what I need to do to get these duplicated keys to work with tpm2_rsadecrypt.

Thanks,
-ted

--
Ted H. Kim, PhD
ted.h.kim(a)oracle.com
+1 310-258-7515

_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org
To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

#2 lore raw

Hi Ted,

Based on what you said you want to accomplish and your above-mentioned references, I have a hunch that you have the keys set up incorrectly.
Can you please,
1. Try to create a key with "userwithauth" set in the step in your script that references policy_duplication man page as in here: "tpm2_create -C src_o.ctx -g sha256 -G rsa -r dupkey.priv -u dupkey.pub \
-L policydupselect.dat -a "sensitivedataorigin|sign|decrypt|userwithauth" -c dupkey.ctx -Q"
2. Share your exact steps/ script that you implemented.
3. Share the key properties of the parent and child object you created. You can use tpm2_readpublic command to dump the key properties.

Thanks

#3 lore raw

Hi Imran,

Thanks for your reply.

I had two cases, but for now, let's talk about the one in the tpm2_policyduplicationselect(1) man page. I did the exact steps listed there in the example. Then after the duplication, I did an import and load, as follows:

# tpm2_import -Q -C dst_n.ctx -i new_dupkey.priv -u dupkey.pub \
     -s dupseed.dat -r imported.priv -L policydupselect.dat
# tpm2_load -Q -C dst_n.ctx -r imported.priv -u dupkey.pub -c imported.ctx

I then tried to do tpm2_rsa_en/decrypt with imported.ctx. The decrypt is where the policy errors came up.

But as you point out below the "userwithauth" attribute is not part of the example in that man page. So let me try again with that attribute added. IIRC, the readpublic on the duplicated/imported key did reference a policy, which I could not figure out how to satisfy. Will get back to you shortly after trying again.

Thanks,
-ted

Quoted 14 lines · Imran Desai

Hi Ted,

Based on what you said you want to accomplish and your above-mentioned references, I have a hunch that you have the keys set up incorrectly.
Can you please,
1. Try to create a key with "userwithauth" set in the step in your script that references policy_duplication man page as in here: "tpm2_create -C src_o.ctx -g sha256 -G rsa -r dupkey.priv -u dupkey.pub \
-L policydupselect.dat -a "sensitivedataorigin|sign|decrypt|userwithauth" -c dupkey.ctx -Q"
2. Share your exact steps/ script that you implemented.
3. Share the key properties of the parent and child object you created. You can use tpm2_readpublic command to dump the key properties.

Thanks
_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org
To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

Signature · 3 lines
Ted H. Kim, PhD
ted.h.kim(a)oracle.com
+1 310-258-7515
#4 lore raw

Imran,

I tried this, but I noticed something that I think is odd.

I added the userwithauth:

# tpm2_create -C src_o.ctx -g sha256 -G rsa -r dupkey.priv -u dupkey.pub \
      -L policydupselect.dat  \
      -a "sensitivedataorigin|sign|decrypt|userwithauth" -c dupkey.ctx -Q

but it does not show up in the readpublic (which is below).

Is this a bug?

FWIW, I am on the 4.1.X branch (just before 4.1.2 came out). Do I need the 4.1.2 changes?

Thanks,
-ted

  # more dupkey.rp-txt
  key: dupkey.ctx
  name: 000b6894c94c68dd0d379b80c6417130e620e9da317b0033b1cddd1ab542c5a592e6
  qualified name: 
000bb9be4705c017f1bf8b238b5f53c87487b4a73c86b8345abfdc671014ab5567ff
  name-alg:
    value: sha256
    raw: 0xb
  attributes:
    value: sensitivedataorigin|decrypt|sign
    raw: 0x60020
  type:
    value: rsa
    raw: 0x1
  exponent: 0x0
  bits: 2048
  scheme:
    value: null
    raw: 0x10
  scheme-halg:
    value: (null)
    raw: 0x0
  sym-alg:
    value: null
    raw: 0x10
  sym-mode:
    value: (null)
    raw: 0x0
  sym-keybits: 0
  rsa: 
cf42bc7b2063618a8e74d9179f263d0b71be412780d09d5f2e876714f5597fe797c97226473
  d2f4b23e3ded77af61c6959ae708e3d59e965f928750a56db367fa6f687ab8a107ac7e89b76fb1aa
  1cb09008e1d239fe874937e292b447970ab464466ab293df3e473c839dbce360efe92c5bb20eac66
  0714e6a7f7f7ce0646eb9a16e2fe80ba148c4bdb591fec14aed763d70f59cfa4d91dbc1515cfe296
  4452a897cea0c958d8da3615003a6b1b08318a6ddf8f9181923ba6eb7fc127a6d9a9148bdd60f3b4
  663ae246f5216f15f3d5a78b6e69b06e9ce5fbd9d62cf461e088a35da3d41930179839e9984e8976
  de8f0a3ecda87812c53771603dca3ffabac01
  authorization policy: 
389e01e8e7605646e8586acc5270ff210125d040d152c348266c99c441
  84f4d2
Quoted 52 lines · ted.h.kim(a)oracle.com

Hi Imran,

Thanks for your reply.

I had two cases, but for now, let's talk about the one in the tpm2_policyduplicationselect(1) man page. I did the exact steps listed there in the example. Then after the duplication, I did an import and load, as follows:

# tpm2_import -Q -C dst_n.ctx -i new_dupkey.priv -u dupkey.pub \
    -s dupseed.dat -r imported.priv -L policydupselect.dat
# tpm2_load -Q -C dst_n.ctx -r imported.priv -u dupkey.pub -c 
imported.ctx

I then tried to do tpm2_rsa_en/decrypt with imported.ctx. The decrypt is where the policy errors came up.

But as you point out below the "userwithauth" attribute is not part of the example in that man page. So let me try again with that attribute added. IIRC, the readpublic on the duplicated/imported key did reference a policy, which I could not figure out how to satisfy. Will get back to you shortly after trying again.

Thanks,
-ted

Quoted 21 lines · Imran Desai

Hi Ted,

Based on what you said you want to accomplish and your above-mentioned references, I have a hunch that you have the keys set up incorrectly.
Can you please,
1. Try to create a key with "userwithauth" set in the step in your script that references policy_duplication man page as in here:
"tpm2_create -C src_o.ctx -g sha256 -G rsa -r dupkey.priv -u dupkey.pub \
-L policydupselect.dat  -a "sensitivedataorigin|sign|decrypt|userwithauth" -c dupkey.ctx -Q"
2. Share your exact steps/ script that you implemented.
3. Share the key properties of the parent and child object you created. You can use tpm2_readpublic command to dump the key properties.

Thanks
_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org
To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

Signature · 3 lines
Ted H. Kim, PhD
ted.h.kim(a)oracle.com
+1 310-258-7515
#8 lore raw

Imran,

Okay, I will try it out.

Also thanks for the pointer to the example on duplicating objects between TPMs.

Thanks,
-ted

Quoted 5 lines · Imran Desai

I have a PR fixing this issue. If you want to try your script with this branch, it is here: https://urldefense.com/v3/__https://github.com/tpm2-software/tpm2-tools/pull/2038__;!!GqivPVa7Brio!JgE6G26n2bbDPLYBuJ2jf-Buv9U53CDF_b_5y43EAj8Q9hiybuldt1D8ZH_RPlQ$
_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org
To unsubscribe send an email to tpm2-leave(a)lists.01.org
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

Signature · 3 lines
Ted H. Kim, PhD
ted.h.kim(a)oracle.com
+1 310-258-7515
#9 lore raw

Imran,

The fix worked -- Thank you.

One other suggestion would be to add "userwithauth" to the tpm2_create commands in the man page examples for tpm2_duplicate(1) and tpm2_policyduplicationselect(1). This would make the duplicated keys in those examples more useful.

Since I am on the 4.1.X branch, should I expect this fix to roll out with 4.1.3 ?

Thanks,
-ted

Quoted 19 lines · ted.h.kim(a)oracle.com

Imran,

Okay, I will try it out.

Also thanks for the pointer to the example on duplicating objects between TPMs.

Thanks,
-ted

Quoted 7 lines · Imran Desai

I have a PR fixing this issue. If you want to try your script with this branch, it is here:
https://urldefense.com/v3/__https://github.com/tpm2-software/tpm2-tools/pull/2038__;!!GqivPVa7Brio!JgE6G26n2bbDPLYBuJ2jf-Buv9U53CDF_b_5y43EAj8Q9hiybuldt1D8ZH_RPlQ$
_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org
To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

Signature · 3 lines
Ted H. Kim, PhD
ted.h.kim(a)oracle.com
+1 310-258-7515
#10 lore raw
Quoted 9 lines

-----Original Message-----
From: ted.h.kim(a)oracle.com [mailto:ted.h.kim(a)oracle.com]
Sent: Wednesday, May 20, 2020 7:38 PM
To: Desai, Imran <imran.desai(a)intel.com>
Cc: tpm2(a)lists.01.org
Subject: [tpm2] Re: trying duplication and then rsa_en/decrypt

Quoted 8 lines

Imran,

The fix worked -- Thank you.

One other suggestion would be to add "userwithauth" to the tpm2_create commands in the man page examples for tpm2_duplicate(1) and tpm2_policyduplicationselect(1). This would make the duplicated keys in those examples more useful.

That patch I had to revert, a similar fix will come out, but we must not turn down userwith when someone:
- doesn't provide attributes via -a
- doesn't provide a password
- does provide a policy

If someone specifies a policy and no password without explicitly providing the attributes, they likely want the authorization to the object to be controlled via policy, not policy and an empty password. So when the tool is choosing attributes that's how it needs to do it. So for your example, you'll have to specify userwithauth and then we will update the manpage to reflect this.

Note that your creating an object with no real auth value (empty password), so keep that in mind.

Quoted 2 lines

Since I am on the 4.1.X branch, should I expect this fix to roll out with 4.1.3 ?

Why not just bump versions? Everything on 4.X is backwards compat, nothing breaks. You may need to bump your tss version, but again, backwards compat, should just Work.

Quoted 35 lines

Thanks,
-ted

Quoted 4 lines · ted.h.kim(a)oracle.com

Imran,

Okay, I will try it out.

Quoted 17 lines

Also thanks for the pointer to the example on duplicating objects between TPMs.

Thanks,
-ted

Quoted 9 lines · Imran Desai

I have a PR fixing this issue. If you want to try your script with this branch, it is here:
https://urldefense.com/v3/__https://github.com/tpm2-software/tpm2-too
ls/pull/2038__;!!GqivPVa7Brio!JgE6G26n2bbDPLYBuJ2jf-Buv9U53CDF_b_5y43 EAj8Q9hiybuldt1D8ZH_RPlQ$
_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

--
Ted H. Kim, PhD
ted.h.kim(a)oracle.com
+1 310-258-7515

_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org
To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

#11 lore raw

William,

Thanks for your reply.

Quoted 21 lines · William C
Quoted 7 lines

-----Original Message-----
From: ted.h.kim(a)oracle.com [mailto:ted.h.kim(a)oracle.com]
Sent: Wednesday, May 20, 2020 7:38 PM
To: Desai, Imran <imran.desai(a)intel.com>
Cc: tpm2(a)lists.01.org
Subject: [tpm2] Re: trying duplication and then rsa_en/decrypt

Quoted 8 lines

Imran,

The fix worked -- Thank you.

One other suggestion would be to add "userwithauth" to the tpm2_create commands in the man page examples for tpm2_duplicate(1) and tpm2_policyduplicationselect(1). This would make the duplicated keys in those examples more useful.

That patch I had to revert, a similar fix will come out, but we must not turn down userwith when someone:
- doesn't provide attributes via -a
- doesn't provide a password
- does provide a policy

Quoted 8 lines

If someone specifies a policy and no password without explicitly providing the attributes, they likely want the authorization to the object to be controlled via policy, not policy and an empty password. So when the tool is choosing attributes that's how it needs to do it. So for your example, you'll have to specify userwithauth and then we will update the manpage to reflect this.

Note that your creating an object with no real auth value (empty password), so keep that in mind.

understand, looking forward to the final fix

Quoted 4 lines
Quoted 1 line

Since I am on the 4.1.X branch, should I expect this fix to roll out with 4.1.3 ?

Why not just bump versions? Everything on 4.X is backwards compat, nothing breaks. You may need to bump your tss version, but again, backwards compat, should just Work.

I will eventually do that.

But for the moment, I don't have the time. I know using tpm2-tools-4.2.X requires tpm2-tss-2.4.x which for my environment has some missing dependencies which I have yet to resolve.

Thanks,
-ted

Quoted 33 lines
Quoted 33 lines

Thanks,
-ted

Quoted 4 lines · ted.h.kim(a)oracle.com

Imran,

Okay, I will try it out.

Quoted 16 lines

Also thanks for the pointer to the example on duplicating objects between TPMs.

Thanks,
-ted

Quoted 9 lines · Imran Desai

I have a PR fixing this issue. If you want to try your script with this branch, it is here:
https://urldefense.com/v3/__https://github.com/tpm2-software/tpm2-too
ls/pull/2038__;!!GqivPVa7Brio!JgE6G26n2bbDPLYBuJ2jf-Buv9U53CDF_b_5y43 EAj8Q9hiybuldt1D8ZH_RPlQ$
_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

--
Ted H. Kim, PhD
ted.h.kim(a)oracle.com
+1 310-258-7515

_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org
To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

Signature · 3 lines
Ted H. Kim, PhD
ted.h.kim(a)oracle.com
+1 310-258-7515
#12 lore raw
Quoted 51 lines

-----Original Message-----
From: ted.h.kim(a)oracle.com [mailto:ted.h.kim(a)oracle.com]
Sent: Thursday, May 21, 2020 11:19 AM
To: Roberts, William C <william.c.roberts(a)intel.com>
Cc: Desai, Imran <imran.desai(a)intel.com>; tpm2(a)lists.01.org
Subject: Re: [tpm2] Re: trying duplication and then rsa_en/decrypt

William,

Thanks for your reply.

Quoted 21 lines · William C
Quoted 7 lines

-----Original Message-----
From: ted.h.kim(a)oracle.com [mailto:ted.h.kim(a)oracle.com]
Sent: Wednesday, May 20, 2020 7:38 PM
To: Desai, Imran <imran.desai(a)intel.com>
Cc: tpm2(a)lists.01.org
Subject: [tpm2] Re: trying duplication and then rsa_en/decrypt

Quoted 8 lines

Imran,

The fix worked -- Thank you.

One other suggestion would be to add "userwithauth" to the tpm2_create commands in the man page examples for tpm2_duplicate(1) and tpm2_policyduplicationselect(1). This would make the duplicated keys in those examples more useful.

That patch I had to revert, a similar fix will come out, but we must not turn down userwith when someone:
- doesn't provide attributes via -a
- doesn't provide a password
- does provide a policy

Quoted 3 lines

If someone specifies a policy and no password without explicitly providing the attributes, they likely want the authorization to the object to be controlled via policy, not policy and an empty password. So when

the tool is choosing attributes that's how it needs to do it.

Quoted 5 lines

So for your example, you'll have to specify userwithauth and then we will update the manpage to reflect this.

Note that your creating an object with no real auth value (empty password), so keep that in mind.

understand, looking forward to the final fix

Quoted 2 lines
Quoted 1 line

Since I am on the 4.1.X branch, should I expect this fix to roll out with 4.1.3 ?

Why not just bump versions? Everything on 4.X is backwards compat, nothing

breaks.

Quoted 8 lines
Quoted 2 lines

You may need to bump your tss version, but again, backwards compat, should just Work.

I will eventually do that.

But for the moment, I don't have the time. I know using tpm2-tools-4.2.X requires tpm2-tss-2.4.x which for my environment has some missing dependencies which I have yet to resolve.

No worries, we should be able to do a backport fix for you. We have a milestone here:
https://github.com/tpm2-software/tpm2-tools/milestone/20

Hopefully Monday we can cut RC0 and then a week form that have a full release.

Quoted 46 lines

Thanks,
-ted

Quoted 31 lines
Quoted 31 lines

Thanks,
-ted

Quoted 4 lines · ted.h.kim(a)oracle.com

Imran,

Okay, I will try it out.

Quoted 18 lines

Also thanks for the pointer to the example on duplicating objects between TPMs.

Thanks,
-ted

Quoted 11 lines · Imran Desai

I have a PR fixing this issue. If you want to try your script with this branch, it is here:
https://urldefense.com/v3/__https://github.com/tpm2-software/tpm2-t
oo ls/pull/2038__;!!GqivPVa7Brio!JgE6G26n2bbDPLYBuJ2jf-Buv9U53CDF_b_5y 43
EAj8Q9hiybuldt1D8ZH_RPlQ$
_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

--
Ted H. Kim, PhD
ted.h.kim(a)oracle.com
+1 310-258-7515

Quoted 4 lines
Quoted 4 lines

_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

--
Ted H. Kim, PhD
ted.h.kim(a)oracle.com
+1 310-258-7515