drm/i915/hdcp: Avoid duplicate HDCP enables
PATCH 1/1 drm/i915/hdcp: Avoid duplicate HDCP enables
From: Sean Paul <[email protected]>
If userspace sets the CP property to DESIRED while it's already ENABLED, the driver will try to re-enable HDCP. On some displays, this will result in R0' mismatches. I'm guessing this is because the display is still sending back Ri instead of re-authenticating.
At any rate, we can fix this inefficiency easily enough by just nooping the DESIRED property set if HDCP is already ENABLED.
---
I suspect this is the actual root cause I was chasing with "drm/i915/hdcp: Add additional R0' wait". I was able to reproduce the R0` messages by marking HDCP desired while it was already enabled. This _should_ work, but it seems like some displays handle it more graciously than others.
drivers/gpu/drm/i915/display/intel_hdcp.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_hdcp.c +7 -3
@@ -2156,12 +2156,16 @@ void intel_hdcp_atomic_check(struct drm_connector *connector, }/* -* Nothing to do if the state didn't change, or HDCP was activated since -* the last commit. And also no change in hdcp content type. +* Nothing to do if content type is unchanged and one of: +* - state didn't change +* - HDCP was activated since the last commit +* - attempting to set to desired while already enabled */ if (old_cp == new_cp || (old_cp ==DRM_MODE_CONTENT_PROTECTION_DESIRED && - new_cp ==DRM_MODE_CONTENT_PROTECTION_ENABLED )) { + new_cp ==DRM_MODE_CONTENT_PROTECTION_ENABLED ) || + (old_cp ==DRM_MODE_CONTENT_PROTECTION_ENABLED && + new_cp ==DRM_MODE_CONTENT_PROTECTION_DESIRED )) {if (old_state->hdcp_content_type == new_state->hdcp_content_type)return ;
Signature · 6 lines
Sean Paul, Software Engineer, Google / Chromium OS _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/hdcp: Avoid duplicate HDCP enables
== Series Details ==
== Series Details ==
Series: drm/i915/hdcp: Avoid duplicate HDCP enables
URL : https://patchwork.freedesktop.org/series/77487/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8515 -> Patchwork_17734
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17734/index.html
Known issues
------------
Here are the changes found in Patchwork_17734 that come from known issues:
### IGT changes ###
#### Possible fixes ####
* igt@i915_selftest@live@execlists:
- {fi-tgl-dsi}: [INCOMPLETE][1] ([i915#1803]) -> [PASS][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8515/fi-tgl-dsi/igt@i915_selftest@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17734/fi-tgl-dsi/igt@i915_selftest@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[i915#1803]: https://gitlab.freedesktop.org/drm/intel/issues/1803
Participating hosts (49 -> 44)
------------------------------
Missing (5): fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-byt-clapper fi-bdw-samus
Build changes
-------------
* Linux: CI_DRM_8515 -> Patchwork_17734
CI-20190529: 20190529
CI_DRM_8515: 41f9bb782f3bb2f30be09683184bbeecb1fd31bb @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5665: c5e5b0ce26fc321591a6d0235c639a1e8ec3cdfa @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_17734: db5d2afbad0bfe5323ee6ec2751931912e80af74 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
db5d2afbad0b drm/i915/hdcp: Avoid duplicate HDCP enables
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17734/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 9 lines · Sean Paul
From: Sean Paul <[email protected]>
If userspace sets the CP property to DESIRED while it's already ENABLED, the driver will try to re-enable HDCP. On some displays, this will result in R0' mismatches. I'm guessing this is because the display is still sending back Ri instead of re-authenticating.
At any rate, we can fix this inefficiency easily enough by just nooping the DESIRED property set if HDCP is already ENABLED.
Sean,
This will skip the hdcp enable.
But at present too we will be getting below WARN_ON from intel_hdcp_enable, to indicate userspace is going wrong with request.
drm_WARN_ON(&dev_priv->drm,
hdcp->value == DRM_MODE_CONTENT_PROTECTION_ENABLED);And if we need to filter this out, could we validate the incoming hdcp request at drm_atomic_connector_set_property() itself? No point in going into the atomic commit without a valid request. something like
drivers/gpu/drm/drm_atomic_uapi.c +6 -0
@@ -746,6 +746,12 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,DRM_DEBUG_KMS ("only drivers can set CP Enabled\n" );return -EINVAL ; } +if (config->content_protection_property == +DRM_MODE_CONTENT_PROTECTION_ENABLED && + val ==DRM_MODE_CONTENT_PROTECTION_DESIRED ) { +DRM_DEBUG_KMS ("Redundant req for content protection\n" ); +return -EINVAL ; + } state->content_protection = val; }else if (property == config->hdcp_content_type_property) { state->hdcp_content_type = val;
-Ram
Quoted 41 lines
Signed-off-by Sean Paul <[email protected]>---
I suspect this is the actual root cause I was chasing with "drm/i915/hdcp: Add additional R0' wait". I was able to reproduce the R0` messages by marking HDCP desired while it was already enabled. This _should_ work, but it seems like some displays handle it more graciously than others.
drivers/gpu/drm/i915/display/intel_hdcp.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/display/intel_hdcp.c +7
-3@@ -2156,12 +2156,16 @@ void intel_hdcp_atomic_check(struct drm_connector *connector, }/* -* Nothing to do if the state didn't change, or HDCP was activated since -* the last commit. And also no change in hdcp content type. +* Nothing to do if content type is unchanged and one of: +* - state didn't change +* - HDCP was activated since the last commit +* - attempting to set to desired while already enabled */ if (old_cp == new_cp || (old_cp ==DRM_MODE_CONTENT_PROTECTION_DESIRED && - new_cp ==DRM_MODE_CONTENT_PROTECTION_ENABLED )) { + new_cp ==DRM_MODE_CONTENT_PROTECTION_ENABLED ) || + (old_cp ==DRM_MODE_CONTENT_PROTECTION_ENABLED && + new_cp ==DRM_MODE_CONTENT_PROTECTION_DESIRED )) {if (old_state->hdcp_content_type == new_state->hdcp_content_type)return ;Signature · 1 line
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 10 lines · Ramalingam C
Quoted 9 lines · Sean Paul
From: Sean Paul <[email protected]>
If userspace sets the CP property to DESIRED while it's already ENABLED, the driver will try to re-enable HDCP. On some displays, this will result in R0' mismatches. I'm guessing this is because the display is still sending back Ri instead of re-authenticating.
At any rate, we can fix this inefficiency easily enough by just nooping the DESIRED property set if HDCP is already ENABLED.
AFAIU may below patch also solves above issue implicitly.
https://patchwork.freedesktop.org/patch/365758/?series=72251&rev=4
Besides that +1 for below Ram comment, it would be better if such type of duplicate enable request should filter by drm_atomic_connector_set_property(). Thanks,
Anshuman Gupta.
Quoted 66 lines
Sean,
This will skip the hdcp enable.
But at present too we will be getting below
WARN_ONfromintel_hdcp_enable, to indicate userspace is going wrong with request.drm_WARN_ON(&dev_priv->drm, hdcp->value == DRM_MODE_CONTENT_PROTECTION_ENABLED);And if we need to filter this out, could we validate the incoming hdcp request at
drm_atomic_connector_set_property()itself? No point in going into the atomic commit without a valid request. something likedrivers/gpu/drm/drm_atomic_uapi.c +6
-1@@ -746,6 +746,12 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,DRM_DEBUG_KMS ("only drivers can set CP Enabled\n" );return -EINVAL ; } +if (config->content_protection_property == +DRM_MODE_CONTENT_PROTECTION_ENABLED && + val ==DRM_MODE_CONTENT_PROTECTION_DESIRED ) { +DRM_DEBUG_KMS ("Redundant req for content protection\n" ); +return -EINVAL ; + } state->content_protection = val; }else if (property == config->hdcp_content_type_property) { state->hdcp_content_type = val; -RamQuoted 34 lines
Signed-off-by Sean Paul <[email protected]>---
I suspect this is the actual root cause I was chasing with "drm/i915/hdcp: Add additional R0' wait". I was able to reproduce the R0` messages by marking HDCP desired while it was already enabled. This _should_ work, but it seems like some displays handle it more graciously than others.
drivers/gpu/drm/i915/display/intel_hdcp.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/display/intel_hdcp.c +5
-3@@ -2156,12 +2156,16 @@ void intel_hdcp_atomic_check(struct drm_connector *connector, }/* -* Nothing to do if the state didn't change, or HDCP was activated since -* the last commit. And also no change in hdcp content type. +* Nothing to do if content type is unchanged and one of: +* - state didn't change +* - HDCP was activated since the last commit +* - attempting to set to desired while already enabled */ if (old_cp == new_cp || (old_cp == DRM_MODE_CONTENT_PROTECTION_DESIRED && - new_cp ==DRM_MODE_CONTENT_PROTECTION_ENABLED )) { + new_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED) ||
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_hdcp.c +2
-0+ (old_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED && + new_cp == DRM_MODE_CONTENT_PROTECTION_DESIRED)) {if (old_state->hdcp_content_type == new_state->hdcp_content_type)return ;Signature · 1 line
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 10 lines · Anshuman Gupta
Quoted 8 lines · Ramalingam C
Quoted 7 lines · Sean Paul
From: Sean Paul <[email protected]>
If userspace sets the CP property to DESIRED while it's already ENABLED, the driver will try to re-enable HDCP. On some displays, this will result in R0' mismatches. I'm guessing this is because the display is still sending back Ri instead of re-authenticating.
Quoted 6 lines
Quoted 2 lines
Quoted 2 lines
At any rate, we can fix this inefficiency easily enough by just nooping the DESIRED property set if HDCP is already ENABLED.
AFAIU may below patch also solves above issue implicitly.
https://patchwork.freedesktop.org/patch/365758/?series=72251&rev=4
Besides that +1 for below Ram comment, it would be better if such type of duplicate enable request should filter bydrm_atomic_connector_set_property().
Thanks Anshuman, I didn't see that patch. Indeed that seems like it accomplishes the same thing.
Let's drop this.
Sean
Quoted 73 lines
Thanks,
Anshuman Gupta.Quoted 70 lines
Sean,
This will skip the hdcp enable.
But at present too we will be getting below
WARN_ONfromintel_hdcp_enable, to indicate userspace is going wrong with request.drm_WARN_ON(&dev_priv->drm, hdcp->value == DRM_MODE_CONTENT_PROTECTION_ENABLED);And if we need to filter this out, could we validate the incoming hdcp request at
drm_atomic_connector_set_property()itself? No point in going into the atomic commit without a valid request. something likedrivers/gpu/drm/drm_atomic_uapi.c +6
-1@@ -746,6 +746,12 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,DRM_DEBUG_KMS ("only drivers can set CP Enabled\n" );return -EINVAL ; } +if (config->content_protection_property == +DRM_MODE_CONTENT_PROTECTION_ENABLED && + val ==DRM_MODE_CONTENT_PROTECTION_DESIRED ) { +DRM_DEBUG_KMS ("Redundant req for content protection\n" ); +return -EINVAL ; + } state->content_protection = val; }else if (property == config->hdcp_content_type_property) { state->hdcp_content_type = val; -RamQuoted 38 lines
Signed-off-by Sean Paul <[email protected]>---
I suspect this is the actual root cause I was chasing with "drm/i915/hdcp: Add additional R0' wait". I was able to reproduce the R0` messages by marking HDCP desired while it was already enabled. This _should_ work, but it seems like some displays handle it more graciously than others.
drivers/gpu/drm/i915/display/intel_hdcp.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/display/intel_hdcp.c +7
-3@@ -2156,12 +2156,16 @@ void intel_hdcp_atomic_check(struct drm_connector *connector, }/* -* Nothing to do if the state didn't change, or HDCP was activated since -* the last commit. And also no change in hdcp content type. +* Nothing to do if content type is unchanged and one of: +* - state didn't change +* - HDCP was activated since the last commit +* - attempting to set to desired while already enabled */ if (old_cp == new_cp || (old_cp ==DRM_MODE_CONTENT_PROTECTION_DESIRED && - new_cp ==DRM_MODE_CONTENT_PROTECTION_ENABLED )) { + new_cp ==DRM_MODE_CONTENT_PROTECTION_ENABLED ) || + (old_cp ==DRM_MODE_CONTENT_PROTECTION_ENABLED && + new_cp ==DRM_MODE_CONTENT_PROTECTION_DESIRED )) {if (old_state->hdcp_content_type == new_state->hdcp_content_type)
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_hdcp.c +0
-1return ; --Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Patchwork
CI[Intel-gfx] ✗ Fi.CI.BUILD: failure for drm/i915/hdcp: Avoid duplicate HDCP enables (rev2)
In reply to Sean Paul== Series Details ==
== Series Details ==
Series: drm/i915/hdcp: Avoid duplicate HDCP enables (rev2)
URL : https://patchwork.freedesktop.org/series/77487/
State : failure
== Summary ==
Applying: drm/i915/hdcp: Avoid duplicate HDCP enables
error: patch failed: drivers/gpu/drm/drm_atomic_uapi.c:746
error: drivers/gpu/drm/drm_atomic_uapi.c: patch does not apply
error: Did you hand edit your patch?
It does not apply to blobs recorded in its index.
hint: Use 'git am --show-current-patch=diff' to see the failed patch Using index info to reconstruct a base tree...
Patch failed at 0001 drm/i915/hdcp: Avoid duplicate HDCP enables When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx