Skip to contentSkip to conversation

packages/systemd: fix double getty on console

PATCH New Jérémy Rosen 3 participants 3 messages May 22, 2020 – May 31, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 packages/systemd: fix double getty on console

When selecting "console" for the automatic getty, the buildroot logic would collide with systemd's internal console detection logic, resulting in two getty being started on the console.

This commit fixes that by doing nothing when "console" is selected and letting systemd-getty-generator deal with starting the proper getty.

Note that if something other than the console is selected
* Things will work properly, even if the selected terminal is also the console
* A getty will still be started on the console.
This is what systemd has been doing on buildroot since the beginning. it could be disabled but I left it for backward compatibility

Fixes #12361
---
 package/systemd/systemd.mk | 46 ++++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 19 deletions(-)
package/systemd/systemd.mk +27 -19
index 50398e747e..92de540725 100644
@@ -497,37 +497,42 @@ define SYSTEMD_USERS
 endef
 
 ifneq ($(call qstrip,$(BR2_TARGET_GENERIC_GETTY_PORT)),)
-# systemd needs getty.service for VTs and serial-getty.service for serial ttys
-# note that console-getty.service should be used on /dev/console as it should not have dependencies
-# also patch the file to use the correct baud-rate, the default baudrate is 115200 so look for that
+# systemd provides multiple units to autospawn getty as neede
+# * getty at .service to start a getty on normal TTY
+# * sertial-getty at .service to start a getty on serial lines
+# * console-getty.service for generic /dev/console
+# * container-getty at .service for a getty on /dev/pts/*
 #
-# systemd defaults to only have getty at tty.service enabled
-# * DefaultInstance=tty1 in getty at service
-# * no DefaultInstance in serial-getty at .service
-# * WantedBy=getty.target in console-getty.service
-# * console-getty is not enabled because of 90-systemd.preset
-# We want "systemctl preset-all" to do the right thing, even when run on the target after boot
-# * remove the default instance of getty at .service via a drop-in in /usr/lib
-# * set a new DefaultInstance for getty at .service instead, if needed
-# * set a new DefaultInstance for serial-getty at .service, if needed
-# * override the systemd-provided preset for console-getty.service if needed
+# the generator systemd-getty-generator will
+# * read the console= kernel command line parameter
+# * enable one of the above units depending on what it finds
+#
+# Systemd defaults to enablinb getty at tty1.service
+#
+# What we want to do
+# * Enable a getty on $BR2_TARGET_GENERIC_TTY_PATH
+# * Set the baudrate for all units according to BR2_TARGET_GENERIC_GETTY_BAUDRATE
+# * Always enable a getty on the console using systemd-getty-generator
+#   (backward compatibility with previous releases of buildroot)
+#
+# What we do
+# * disable getty at tty1 (enabled by upstream systemd)
+# * enable getty at xxx if  $BR2_TARGET_GENERIC_TTY_PATH is a tty
+# * enable serial-getty at xxx for other $BR2_TARGET_GENERIC_TTY_PATH
+# * rewrite baudrates if a baudrate is provided
 define SYSTEMD_INSTALL_SERVICE_TTY
 	mkdir $(TARGET_DIR)/usr/lib/systemd/system/getty at .service.d; \
 	printf '[Install]\nDefaultInstance=\n' \
 		>$(TARGET_DIR)/usr/lib/systemd/system/getty at .service.d/buildroot-console.conf; \
 	if [ $(BR2_TARGET_GENERIC_GETTY_PORT) = "console" ]; \
 	then \
-		TARGET="console-getty.service"; \
-		printf 'enable console-getty.service\n' \
-			>$(TARGET_DIR)/usr/lib/systemd/system-preset/81-buildroot-tty.preset; \
+		: ; \
 	elif echo $(BR2_TARGET_GENERIC_GETTY_PORT) | egrep -q 'tty[0-9]*$$'; \
 	then \
-		TARGET="getty at .service"; \
 		printf '[Install]\nDefaultInstance=%s\n' \
 			$(call qstrip,$(BR2_TARGET_GENERIC_GETTY_PORT)) \
 			>$(TARGET_DIR)/usr/lib/systemd/system/getty at .service.d/buildroot-console.conf; \
 	else \
-		TARGET="serial-getty at .service"; \
 		mkdir $(TARGET_DIR)/usr/lib/systemd/system/serial-getty at .service.d;\
 		printf '[Install]\nDefaultInstance=%s\n' \
 			$(call qstrip,$(BR2_TARGET_GENERIC_GETTY_PORT)) \
@@ -535,7 +540,10 @@ define SYSTEMD_INSTALL_SERVICE_TTY
 	fi; \
 	if [ $(call qstrip,$(BR2_TARGET_GENERIC_GETTY_BAUDRATE)) -gt 0 ] ; \
 	then \
-		$(SED) 's,115200,$(BR2_TARGET_GENERIC_GETTY_BAUDRATE),' $(TARGET_DIR)/lib/systemd/system/$${TARGET}; \
+		$(SED) 's/115200/$(BR2_TARGET_GENERIC_GETTY_BAUDRATE),115200/' $(TARGET_DIR)/lib/systemd/system/getty at .service; \
+		$(SED) 's/115200/$(BR2_TARGET_GENERIC_GETTY_BAUDRATE),115200/' $(TARGET_DIR)/lib/systemd/system/serial-getty at .service; \
+		$(SED) 's/115200/$(BR2_TARGET_GENERIC_GETTY_BAUDRATE),115200/' $(TARGET_DIR)/lib/systemd/system/console-getty at .service; \
+		$(SED) 's/115200/$(BR2_TARGET_GENERIC_GETTY_BAUDRATE),115200/' $(TARGET_DIR)/lib/systemd/system/container-getty at .service; \
 	fi
 endef
 endif
Signature · 1 line
2.26.2
#1 lore raw

PATCH 1/1 packages/systemd: fix double getty on console

J?r?my, All,

On 2020-05-22 18:59 +0200, J?r?my Rosen spake thusly:

Quoted 14 lines

When selecting "console" for the automatic getty, the buildroot logic would collide with systemd's internal console detection logic, resulting in two getty being started on the console.

This commit fixes that by doing nothing when "console" is selected and letting systemd-getty-generator deal with starting the proper getty.

Note that if something other than the console is selected
* Things will work properly, even if the selected terminal is also the console
* A getty will still be started on the console.
This is what systemd has been doing on buildroot since the beginning. it could be disabled but I left it for backward compatibility

Quoted 2 lines
Fixes #12361

Applied to master, thanks.

Comments below, however...

Quoted 70 lines
---
 package/systemd/systemd.mk | 46 ++++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 19 deletions(-)
package/systemd/systemd.mk +23 -18
index 50398e747e..92de540725 100644
@@ -497,37 +497,42 @@ define SYSTEMD_USERS
 endef
 
 ifneq ($(call qstrip,$(BR2_TARGET_GENERIC_GETTY_PORT)),)
-# systemd needs getty.service for VTs and serial-getty.service for serial ttys
-# note that console-getty.service should be used on /dev/console as it should not have dependencies
-# also patch the file to use the correct baud-rate, the default baudrate is 115200 so look for that
+# systemd provides multiple units to autospawn getty as neede
+# * getty at .service to start a getty on normal TTY
+# * sertial-getty at .service to start a getty on serial lines
+# * console-getty.service for generic /dev/console
+# * container-getty at .service for a getty on /dev/pts/*
 #
-# systemd defaults to only have getty at tty.service enabled
-# * DefaultInstance=tty1 in getty at service
-# * no DefaultInstance in serial-getty at .service
-# * WantedBy=getty.target in console-getty.service
-# * console-getty is not enabled because of 90-systemd.preset
-# We want "systemctl preset-all" to do the right thing, even when run on the target after boot
-# * remove the default instance of getty at .service via a drop-in in /usr/lib
-# * set a new DefaultInstance for getty at .service instead, if needed
-# * set a new DefaultInstance for serial-getty at .service, if needed
-# * override the systemd-provided preset for console-getty.service if needed
+# the generator systemd-getty-generator will
+# * read the console= kernel command line parameter
+# * enable one of the above units depending on what it finds
+#
+# Systemd defaults to enablinb getty at tty1.service
+#
+# What we want to do
+# * Enable a getty on $BR2_TARGET_GENERIC_TTY_PATH
+# * Set the baudrate for all units according to BR2_TARGET_GENERIC_GETTY_BAUDRATE
+# * Always enable a getty on the console using systemd-getty-generator
+#   (backward compatibility with previous releases of buildroot)
+#
+# What we do
+# * disable getty at tty1 (enabled by upstream systemd)
+# * enable getty at xxx if  $BR2_TARGET_GENERIC_TTY_PATH is a tty
+# * enable serial-getty at xxx for other $BR2_TARGET_GENERIC_TTY_PATH
+# * rewrite baudrates if a baudrate is provided
 define SYSTEMD_INSTALL_SERVICE_TTY
 	mkdir $(TARGET_DIR)/usr/lib/systemd/system/getty at .service.d; \
 	printf '[Install]\nDefaultInstance=\n' \
 		>$(TARGET_DIR)/usr/lib/systemd/system/getty at .service.d/buildroot-console.conf; \
 	if [ $(BR2_TARGET_GENERIC_GETTY_PORT) = "console" ]; \
 	then \
-		TARGET="console-getty.service"; \
-		printf 'enable console-getty.service\n' \
-			>$(TARGET_DIR)/usr/lib/systemd/system-preset/81-buildroot-tty.preset; \
+		: ; \
 	elif echo $(BR2_TARGET_GENERIC_GETTY_PORT) | egrep -q 'tty[0-9]*$$'; \
 	then \
-		TARGET="getty at .service"; \
 		printf '[Install]\nDefaultInstance=%s\n' \
 			$(call qstrip,$(BR2_TARGET_GENERIC_GETTY_PORT)) \
 			>$(TARGET_DIR)/usr/lib/systemd/system/getty at .service.d/buildroot-console.conf; \
 	else \
-		TARGET="serial-getty at .service"; \
 		mkdir $(TARGET_DIR)/usr/lib/systemd/system/serial-getty at .service.d;\
 		printf '[Install]\nDefaultInstance=%s\n' \
 			$(call qstrip,$(BR2_TARGET_GENERIC_GETTY_PORT)) \

package/systemd/systemd.mk define SYSTEMD_INSTALL_SERVICE_TTY · line 543

Quoted 5 lines
package/systemd/systemd.mk +1 -1
@@ -535,7 +540,10 @@ define SYSTEMD_INSTALL_SERVICE_TTY
 	fi; \
 	if [ $(call qstrip,$(BR2_TARGET_GENERIC_GETTY_BAUDRATE)) -gt 0 ] ; \
 	then \
-		$(SED) 's,115200,$(BR2_TARGET_GENERIC_GETTY_BAUDRATE),' $(TARGET_DIR)/lib/systemd/system/$${TARGET}; \
+		$(SED) 's/115200/$(BR2_TARGET_GENERIC_GETTY_BAUDRATE),115200/' $(TARGET_DIR)/lib/systemd/system/getty at .service; \

/lib/systemd/system/getty at .service does not actually contain 115200, and there are no toher speed specified either.

However, I kept it.

Applied to master, thanks.

Regards,
Yann E. MORIN.

Quoted 13 lines
package/systemd/systemd.mk +3 -0
+		$(SED) 's/115200/$(BR2_TARGET_GENERIC_GETTY_BAUDRATE),115200/' $(TARGET_DIR)/lib/systemd/system/serial-getty at .service; \
+		$(SED) 's/115200/$(BR2_TARGET_GENERIC_GETTY_BAUDRATE),115200/' $(TARGET_DIR)/lib/systemd/system/console-getty at .service; \
+		$(SED) 's/115200/$(BR2_TARGET_GENERIC_GETTY_BAUDRATE),115200/' $(TARGET_DIR)/lib/systemd/system/container-getty at .service; \
 	fi
 endef
 endif
Signature · 6 lines
2.26.2

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#2 lore raw

PATCH 1/1 packages/systemd: fix double getty on console

In reply to Jérémy Rosen
Quoted 16 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"J?r?my" == J?r?my Rosen <[email protected]> writes:

When selecting "console" for the automatic getty, the buildroot logic would collide with systemd's internal console detection logic, resulting in two getty being started on the console.

This commit fixes that by doing nothing when "console" is selected and letting systemd-getty-generator deal with starting the proper getty.

Note that if something other than the console is selected
* Things will work properly, even if the selected terminal is also the console
* A getty will still be started on the console.
This is what systemd has been doing on buildroot since the beginning. it could be disabled but I left it for backward compatibility

Quoted 2 lines
Fixes #12361

Committed to 2020.02.x, thanks.

Signature · 1 line
Bye, Peter Korsgaard