doc: dfu: describe eMMC partition number parameter
PATCH 1/1 doc: dfu: describe eMMC partition number parameter
In dfu_alt_info for eMMC the eMMC partition number can be specified.
The separator in dfu_alt_info is a semicolon not a comma.
--- doc/README.dfu | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)
doc/README.dfu +15 -6
@@ -49,7 +49,7 @@ Configuration Options: Environment variables: the dfu command use 3 environments variables: - "dfu_alt_info" : the DFU setting for the USB download gadget with a comma + "dfu_alt_info" : the DFU setting for the USB download gadget with a semicolon separated string of information on each alternate: dfu_alt_info="<alt1>;<alt2>;....;<altN>"
@@ -87,12 +87,21 @@ Commands: "mmc" (for eMMC and SD card) cmd: dfu 0 mmc <dev> each element in "dfu_alt_info" = - <name> raw <offset> <size> raw access to mmc device - <name> part <dev> <part_id> raw acces to partition - <name> fat <dev> <part_id> file in FAT partition - <name> ext4 <dev> <part_id> file in EXT4 partition + <name> raw <offset> <size> [mmcpart <num>] raw access to mmc device + <name> part <dev> <part_id> [mmcpart <num>] raw access to partition + <name> fat <dev> <part_id> [mmcpart <num>] file in FAT partition + <name> ext4 <dev> <part_id> [mmcpart <num>] file in EXT4 partition + + with <partid> being the GPT or DOS partition index, + with <num> being the eMMC hardware partition number. + + A value of environment variable dfu_alt_info for eMMC could be: + + "u-boot raw 0x3e 0x800 mmcpart 1;bl2 raw 0x1e 0x1d mmcpart 1" + + A value of environment variable dfu_alt_info for SD card could be: - with <partid> is the GPT or DOS partition index + "u-boot raw 0x80 0x800;uImage ext4 0 2" "nand" (raw slc nand device) cmd: dfu 0 nand <dev>
--
2.26.2
PATCH 1/1 doc: dfu: describe eMMC partition number parameter
On Sat, 23 May 2020 11:36:49 +0200
Heinrich Schuchardt <[email protected]> wrote:
Thank you Heinrich for preparing those documentation improvement.
Quoted 55 lines
In
dfu_alt_infofor eMMC the eMMC partition number can be specified.The separator in
dfu_alt_infois a semicolon not a comma.Signed-off-by Heinrich Schuchardt <[email protected]>--- doc/README.dfu | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)doc/README.dfu +0
-1@@ -49,7 +49,7 @@ Configuration Options: Environment variables: the dfu command use 3 environments variables: - "dfu_alt_info" : the DFU setting for the USB download gadget witha comma
+ "dfu_alt_info" : the DFU setting for the USB download gadget with a semicolon separated string of information on each alternate:dfu_alt_info="<alt1>;<alt2>;....;<altN>"doc/README.dfu +1
-4@@ -87,12 +87,21 @@ Commands: "mmc" (for eMMC and SD card) cmd: dfu 0 mmc <dev> each element in "dfu_alt_info" = - <name> raw <offset> <size> raw access to mmc device - <name> part <dev> <part_id> raw acces to partition - <name> fat <dev> <part_id> file in FAT partition - <name> ext4 <dev> <part_id> file in EXT4 partition + <name> raw <offset> <size> [mmcpart <num>] raw access to mmcdevice
+ <name> part <dev> <part_id> [mmcpart <num>] raw access to
partition
+ <name> fat <dev> <part_id> [mmcpart <num>] file in FAT
partition
+ <name> ext4 <dev> <part_id> [mmcpart <num>] file in EXT4
partition +doc/README.dfu +8
-0+ with <partid> being the GPT or DOS partition index, + with <num> being the eMMC hardware partition number. + + A value of environment variable dfu_alt_info for eMMC could be: + + "u-boot raw 0x3e 0x800 mmcpart 1;bl2 raw 0x1e 0x1d mmcpart 1" + + A value of environment variable dfu_alt_info for SD card couldbe:
doc/README.dfu +1
-2- with <partid> is the GPT or DOS partition index + "u-boot raw 0x80 0x800;uImage ext4 0 2" "nand" (raw slc nand device) cmd: dfu 0 nand <dev> --
Quoted 2 lines
2.26.2
Tom, I will not be able to prepare any PR by the end of the incoming week. As those (this and following patches) are documentation upgrading patches, please pull them directly to -master.
Thanks in advance.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200524/0ab4ed65/attachment.sig>
PATCH 1/1 doc: dfu: describe eMMC partition number parameter
In reply to Heinrich SchuchardtQuoted 6 lines · Heinrich Schuchardt
In
dfu_alt_infofor eMMC the eMMC partition number can be specified.The separator in
dfu_alt_infois a semicolon not a comma.Signed-off-by Heinrich Schuchardt <[email protected]>Acked-by Lukasz Majewski <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200525/e3b53ab0/attachment.sig>