add I2C device and compatible ID
Subsystems (3)
PATCH 1/1 add I2C device and compatible ID
The nau8810 driver can also compatible with nau8812 and nau8814.
Signed-off-by Seven Lee <[email protected]>
--- .../devicetree/bindings/sound/nau8812.txt | 16 ++++++++++++++++ .../devicetree/bindings/sound/nau8814.txt | 16 ++++++++++++++++ sound/soc/codecs/nau8810.c | 4 ++++ 3 files changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nau8812.txt create mode 100644 Documentation/devicetree/bindings/sound/nau8814.txt
Documentation/devicetree/bindings/sound/nau8812.txt new file +16 -0
@@ -0,0 +1,16 @@ +NAU8812 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "nuvoton,nau8812" + + - reg : the I2C address of the device. + +Example: + +codec: nau8812@1a { + compatible = "nuvoton,nau8812"; + reg = <0x1a>; +};
Documentation/devicetree/bindings/sound/nau8814.txt new file +16 -0
@@ -0,0 +1,16 @@ +NAU8814 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "nuvoton,nau8814" + + - reg : the I2C address of the device. + +Example: + +codec: nau8814@1a { + compatible = "nuvoton,nau8814"; + reg = <0x1a>; +};
sound/soc/codecs/nau8810.c +4 -0
@@ -895,6 +895,8 @@ static int nau8810_i2c_probe(struct i2c_client *i2c,static const struct i2c_device_id nau8810_i2c_id[] = { {"nau8810" ,0 }, + {"nau8812" ,0 }, + {"nau8814" ,0 }, { } };MODULE_DEVICE_TABLE (i2c, nau8810_i2c_id);
@@ -902,6 +904,8 @@ MODULE_DEVICE_TABLE(i2c, nau8810_i2c_id);#ifdef CONFIG_OF static const struct of_device_id nau8810_of_match[] = { { .compatible ="nuvoton,nau8810" , }, + { .compatible ="nuvoton,nau8812" , }, + { .compatible ="nuvoton,nau8814" , }, { } };MODULE_DEVICE_TABLE (of, nau8810_of_match);
Signature · 1 line
2.26.2
PATCH 1/1 add I2C device and compatible ID
The nau8810 driver can also compatible with nau8812 and nau8814.
Signed-off-by Seven Lee <[email protected]>
--- .../devicetree/bindings/sound/nau8812.txt | 16 ++++++++++++++++ .../devicetree/bindings/sound/nau8814.txt | 16 ++++++++++++++++ sound/soc/codecs/nau8810.c | 4 ++++ 3 files changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nau8812.txt create mode 100644 Documentation/devicetree/bindings/sound/nau8814.txt
Documentation/devicetree/bindings/sound/nau8812.txt new file +16 -0
@@ -0,0 +1,16 @@ +NAU8812 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "nuvoton,nau8812" + + - reg : the I2C address of the device. + +Example: + +codec: nau8812@1a { + compatible = "nuvoton,nau8812"; + reg = <0x1a>; +};
Documentation/devicetree/bindings/sound/nau8814.txt new file +16 -0
@@ -0,0 +1,16 @@ +NAU8814 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "nuvoton,nau8814" + + - reg : the I2C address of the device. + +Example: + +codec: nau8814@1a { + compatible = "nuvoton,nau8814"; + reg = <0x1a>; +};
sound/soc/codecs/nau8810.c +4 -0
@@ -895,6 +895,8 @@ static int nau8810_i2c_probe(struct i2c_client *i2c,static const struct i2c_device_id nau8810_i2c_id[] = { {"nau8810" ,0 }, + {"nau8812" ,0 }, + {"nau8814" ,0 }, { } };MODULE_DEVICE_TABLE (i2c, nau8810_i2c_id);
@@ -902,6 +904,8 @@ MODULE_DEVICE_TABLE(i2c, nau8810_i2c_id);#ifdef CONFIG_OF static const struct of_device_id nau8810_of_match[] = { { .compatible ="nuvoton,nau8810" , }, + { .compatible ="nuvoton,nau8812" , }, + { .compatible ="nuvoton,nau8814" , }, { } };MODULE_DEVICE_TABLE (of, nau8810_of_match);
Signature · 1 line
2.26.2
Mark Brown
maintainerQuoted 7 lines · Seven Lee
The nau8810 driver can also compatible with nau8812 and nau8814.
Signed-off-by Seven Lee <[email protected]>--- .../devicetree/bindings/sound/nau8812.txt | 16 ++++++++++++++++ .../devicetree/bindings/sound/nau8814.txt | 16 ++++++++++++++++ sound/soc/codecs/nau8810.c | 4 ++++
If they're compatible you should add the additional IDs to the same binding document rather than adding additional binding documents.