Skip to contentSkip to conversation

dpaa_eth: fix usage as DSA master, try 3

PATCH In review Vladimir Oltean 5 participants 7 messages May 24, 2020 – Jun 16, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dpaa_eth: fix usage as DSA master, try 3

From: Vladimir Oltean <[email protected]>

The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver.

All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports.

It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion.

Actually there have already been at least 2 previous attempts to make this work:
- Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
- One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA":
https://patchwork.ozlabs.org/project/netdev/cover/[email protected]/
(I couldn't really figure out which one was supposed to solve the problem and how).

Point being, it looks like this is still pretty much a problem today. On T1040, the /sys/class/net/eth0 symlink currently points to

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpaa-ethernet.0/net/eth0

which pretty much illustrates the problem. The closest of_node we've got is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000, which is what we'd like to be able to reference from DSA as host port.

For of_find_net_device_by_node to find the eth0 port, we would need the parent of the eth0 net_device to not be the "dpaa-ethernet" platform device, but to point 1 level higher, aka the "fsl,fman-memac" node directly. The new sysfs path would look like this:

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net/eth0

And this is exactly what SET_NETDEV_DEV does. It sets the parent of the net_device. The new parent has an of_node associated with it, and of_dev_node_match already checks for the of_node of the device or of its parent.

Fixes a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
Fixes c6e26ea8c893 ("dpaa_eth: change device used")
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +1 -1
index 2cd1f8efdfa3..6bfa7575af94 100644
@@ -2914,7 +2914,7 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	}
 
 	/* Do this here, so we can be verbose early */
-	SET_NETDEV_DEV(net_dev, dev);
+	SET_NETDEV_DEV(net_dev, dev->parent);
 	dev_set_drvdata(dev, net_dev);
 
 	priv = netdev_priv(net_dev);
Signature · 1 line
2.25.1
#1 lore raw
Quoted 19 lines

-----Original Message-----
From: Vladimir Oltean <[email protected]>
Sent: Monday, May 25, 2020 12:23 AM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]; Madalin Bucur (OSS) <[email protected]>; [email protected]
Subject: [PATCH] dpaa_eth: fix usage as DSA master, try 3

From: Vladimir Oltean <[email protected]>

The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver.

All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports.

Quoted 4 lines

It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion.

Changing a netdevice parent to satisfy this DSA assumption can be regarded as being just as silly. How about changing the DSA assumption, not the generic of_find_net_device_by_node API?

ACPI support is in the making for these platforms, is DSA going to work with that?

Quoted 8 lines

Actually there have already been at least 2 previous attempts to make this work:
- Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
- One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA":
https://patchwork.ozlabs.org/project/netdev/cover/1508178970-28945-1-
[email protected]/
(I couldn't really figure out which one was supposed to solve the problem and how).

The prior changes were made without access to a DSA setup. Has this patch been tested working on such a setup?

Quoted 18 lines

Point being, it looks like this is still pretty much a problem today. On T1040, the /sys/class/net/eth0 symlink currently points to

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpa a-ethernet.0/net/eth0

which pretty much illustrates the problem. The closest of_node we've got is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000, which is what we'd like to be able to reference from DSA as host port.

For of_find_net_device_by_node to find the eth0 port, we would need the parent of the eth0 net_device to not be the "dpaa-ethernet" platform device, but to point 1 level higher, aka the "fsl,fman-memac" node directly. The new sysfs path would look like this:

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net /eth0

Quoted 7 lines

And this is exactly what SET_NETDEV_DEV does. It sets the parent of the net_device. The new parent has an of_node associated with it, and of_dev_node_match already checks for the of_node of the device or of its parent.

Fixes a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
Fixes c6e26ea8c893 ("dpaa_eth: change device used")

If this is picked up in stable trees, we may need to make sure some other changes are there to keep things working, i.e. this one may matter:

commit 060ad66f97954fa93ad495542c8a4f1b6c45aa34

Author: Madalin Bucur <[email protected]>
Date:   Wed Oct 23 12:08:44 2019 +0300

dpaa_eth: change DMA device

The DPAA Ethernet driver is using the FMan MAC as the device for DMA mapping. This is not actually correct, as the real DMA device is the FMan port (the FMan Rx port for reception and the FMan Tx port for transmission). Changing the device used for DMA mapping to the Fman Rx and Tx port devices.

On each target code base one needs to review the impact.
Speaking of impact, does this change keep the existing udev rules functional?

Quoted 22 lines
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +1 -1
index 2cd1f8efdfa3..6bfa7575af94 100644
@@ -2914,7 +2914,7 @@ static int dpaa_eth_probe(struct platform_device
 *pdev)
 	}
 
 	/* Do this here, so we can be verbose early */
-	SET_NETDEV_DEV(net_dev, dev);
+	SET_NETDEV_DEV(net_dev, dev->parent);
 	dev_set_drvdata(dev, net_dev);
 

priv = netdev_priv(net_dev);
--
2.25.1

#2 lore raw
Quoted 24 lines · Madalin Bucur (OSS)
Quoted 19 lines

-----Original Message-----
From: Vladimir Oltean <[email protected]>
Sent: Monday, May 25, 2020 12:23 AM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]; Madalin Bucur (OSS) <[email protected]>; [email protected]
Subject: [PATCH] dpaa_eth: fix usage as DSA master, try 3

From: Vladimir Oltean <[email protected]>

The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver.

All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports.

Quoted 4 lines

It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion.

Quoted 6 lines

Changing a netdevice parent to satisfy this DSA assumption can be regarded as being just as silly. How about changing the DSA assumption, not the generic of_find_net_device_by_node API?

ACPI support is in the making for these platforms, is DSA going to work with that?

Hi Madalin

If you listen to what the ACPI people say, ACPI is never going to work with DSA. ACPI is too primitive, you need to use an advanced configuration system like DT.

Andrew

#3 lore raw
In reply to Madalin Bucur (OSS)

Hi Madalin,

Quoted 20 lines · Madalin Bucur (OSS)
Quoted 20 lines

-----Original Message-----
From: Vladimir Oltean <[email protected]>
Sent: Monday, May 25, 2020 12:23 AM
To: [email protected]
Cc: [email protected]; [email protected]; [email protected]; Madalin Bucur (OSS) <[email protected]>; [email protected]
Subject: [PATCH] dpaa_eth: fix usage as DSA master, try 3

From: Vladimir Oltean <[email protected]>

The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver.

All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports.

Quoted 9 lines
Quoted 4 lines

It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion.

Changing a netdevice parent to satisfy this DSA assumption can be regarded as being just as silly. How about changing the DSA assumption, not the generic of_find_net_device_by_node API?

Changing of_find_net_device_by_node to do what, exactly? Actually the check for dev->parent is there for PCI device drivers which don't require OF to probe but may have OF bindings nonetheless, for things like phy-handle etc. We use that for LS1028A, and it works both ways:
the Ocelot/Felix switch (a PCI function) can find the host ENETC port (another PCI function) via DT, and a cascaded switch (a SPI device) can use the Ocelot/Felix switch again via DT.

If there is good enough justification to make of_find_net_device_by_node look at dev->parent->parent, then ok, we can do that, but I thought that changing the parent is clean and unintrusive enough. Users trying to follow the device hierarchy are probably wondering what's with that dpaa-ethernet.0 device anyway, what does it correspond to. I don't know all the ways in which people are using dpaa-eth, but I don't know what useful information can be gathered from having dpaa-ethernet.0 as parent for the net-device (information which this patch would be losing).

Quoted 3 lines

ACPI support is in the making for these platforms, is DSA going to work with that?

I don't know anything about ACPI.

Quoted 45 lines
Quoted 8 lines

Actually there have already been at least 2 previous attempts to make this work:
- Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
- One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA":
https://patchwork.ozlabs.org/project/netdev/cover/1508178970-28945-1-
[email protected]/
(I couldn't really figure out which one was supposed to solve the problem and how).

The prior changes were made without access to a DSA setup. Has this patch been tested working on such a setup?

Quoted 18 lines

Point being, it looks like this is still pretty much a problem today. On T1040, the /sys/class/net/eth0 symlink currently points to

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpa a-ethernet.0/net/eth0

which pretty much illustrates the problem. The closest of_node we've got is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000, which is what we'd like to be able to reference from DSA as host port.

For of_find_net_device_by_node to find the eth0 port, we would need the parent of the eth0 net_device to not be the "dpaa-ethernet" platform device, but to point 1 level higher, aka the "fsl,fman-memac" node directly. The new sysfs path would look like this:

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net /eth0

Quoted 7 lines

And this is exactly what SET_NETDEV_DEV does. It sets the parent of the net_device. The new parent has an of_node associated with it, and of_dev_node_match already checks for the of_node of the device or of its parent.

Fixes a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
Fixes c6e26ea8c893 ("dpaa_eth: change device used")

If this is picked up in stable trees, we may need to make sure some other changes are there to keep things working, i.e. this one may matter:

commit 060ad66f97954fa93ad495542c8a4f1b6c45aa34

Author: Madalin Bucur <[email protected]>
Date:   Wed Oct 23 12:08:44 2019 +0300
Quoted 8 lines

dpaa_eth: change DMA device

The DPAA Ethernet driver is using the FMan MAC as the device for DMA mapping. This is not actually correct, as the real DMA device is the FMan port (the FMan Rx port for reception and the FMan Tx port for transmission). Changing the device used for DMA mapping to the Fman Rx and Tx port devices.

The top-most Fixes: tag points to this commit precisely. No one will backport it beyond that.
That being said, it's pretty clear to me that no mainline user so far has been affected by this, so I'm also ok with targeting this patch for net-next

Quoted 3 lines

On each target code base one needs to review the impact.
Speaking of impact, does this change keep the existing udev rules functional?

Yup.
Responding to this, as well as to ''Has this patch been tested working on such a setup?":

[root@T1040 ~] # ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UNKNOWN mode DEFAULT group default qlen 1000
    link/ether e2:4f:d3:fb:ff:7a brd ff:ff:ff:ff:ff:ff
3: fm1-gb3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq
state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:03 brd ff:ff:ff:ff:ff:ff
4: fm1-gb4: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq
state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:04 brd ff:ff:ff:ff:ff:ff
5: fm1-gb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1532 qdisc mq state
UP mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:00 brd ff:ff:ff:ff:ff:ff
6: fm1-gb1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state
UP mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:01 brd ff:ff:ff:ff:ff:ff
7: fm1-gb2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state
UP mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:02 brd ff:ff:ff:ff:ff:ff
8: enP1p1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether 68:05:ca:12:88:d9 brd ff:ff:ff:ff:ff:ff
9: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT
group default qlen 1000
    link/ipip 0.0.0.0 brd 0.0.0.0
10: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT
group default qlen 1000
    link/sit 0.0.0.0 brd 0.0.0.0
11: swp0@fm1-gb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:00 brd ff:ff:ff:ff:ff:ff
12: swp1@fm1-gb0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:00 brd ff:ff:ff:ff:ff:ff
13: swp2@fm1-gb0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:00 brd ff:ff:ff:ff:ff:ff
14: swp3@fm1-gb0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:00 brd ff:ff:ff:ff:ff:ff
15: swp4@fm1-gb0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:00 brd ff:ff:ff:ff:ff:ff
16: swp5@fm1-gb0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:00 brd ff:ff:ff:ff:ff:ff
17: swp6@fm1-gb0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:00 brd ff:ff:ff:ff:ff:ff
18: swp7@fm1-gb0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:0c:00:82:00 brd ff:ff:ff:ff:ff:ff
[root@T1040 ~] # ip link set dev swp0 down
[  841.482839] mscc_seville ffe800000.ethernet-switch swp0: Link is Down
[root@T1040 ~] # ip link set dev swp0 up
[  853.245566] mscc_seville ffe800000.ethernet-switch swp0:
configuring for inband/qsgmii link mode
[  853.255228] 8021q: adding VLAN 0 to HW filter on device swp0
[  856.323253] mscc_seville ffe800000.ethernet-switch swp0: Link is Up
- Unknown/Unknown - flow control rx/tx
[  856.333001] IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready

fm1-gb0 is DSA master for the embeded Vitesse/Microsemi/Microchip Seville switch on NXP T1040. The "fm1-gb0" etc net device names are coming from the following rules which I haven't modified:

[root@T1040 ~] # cat /etc/udev/rules.d/71-fsl-dpaa-persistent-networking.rules # Rules for handling naming the DPAA FMan ethernet ports in a consistent way SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe4e0000", NAME="fm1-gb0"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe4e2000", NAME="fm1-gb1"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe4e4000", NAME="fm1-gb2"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe4e6000", NAME="fm1-gb3"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe4e8000", NAME="fm1-gb4"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe4f0000", NAME="fm1-10g"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe5e0000", NAME="fm2-gb0"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe5e2000", NAME="fm2-gb1"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe5e4000", NAME="fm2-gb2"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe5e6000", NAME="fm2-gb3"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe5e8000", NAME="fm2-gb4"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ffe5f0000", NAME="fm2-10g"

# P1023 has its Fman @ different offsets
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ff7e0000", NAME="fm1-gb0"
SUBSYSTEM=="net", DRIVERS=="fsl_dpa*", ATTR{device_addr}=="ff7e2000", NAME="fm1-gb1"

# Rename macless0 port to "macless0"
SUBSYSTEM=="net", ATTR{device_type}=="macless0", NAME="macless0"

and the net device names are coming from the "label" device tree properties of each individual seville port.

Quoted 14 lines
Quoted 14 lines
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +0 -0
index 2cd1f8efdfa3..6bfa7575af94 100644
@@ -2914,7 +2914,7 @@ static int dpaa_eth_probe(struct platform_device
 *pdev)
      }
 
Quoted 9 lines
Quoted 8 lines
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +1 -1
      /* Do this here, so we can be verbose early */
-     SET_NETDEV_DEV(net_dev, dev);
+     SET_NETDEV_DEV(net_dev, dev->parent);
      dev_set_drvdata(dev, net_dev);
 
      priv = netdev_priv(net_dev);

--
2.25.1

Regards,
-Vladimir

Reviewed-by on v1 1/1
#4 lore raw
In reply to Vladimir Oltean
Quoted 40 lines · Vladimir Oltean

From: Vladimir Oltean <[email protected]>

The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver.

All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports.

It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion.

Actually there have already been at least 2 previous attempts to make this work:
- Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
- One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA":
https://patchwork.ozlabs.org/project/netdev/cover/[email protected]/
(I couldn't really figure out which one was supposed to solve the problem and how).

Point being, it looks like this is still pretty much a problem today. On T1040, the /sys/class/net/eth0 symlink currently points to

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpaa-ethernet.0/net/eth0

which pretty much illustrates the problem. The closest of_node we've got is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000, which is what we'd like to be able to reference from DSA as host port.

For of_find_net_device_by_node to find the eth0 port, we would need the parent of the eth0 net_device to not be the "dpaa-ethernet" platform device, but to point 1 level higher, aka the "fsl,fman-memac" node directly. The new sysfs path would look like this:

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net/eth0

Quoted 8 lines

And this is exactly what SET_NETDEV_DEV does. It sets the parent of the net_device. The new parent has an of_node associated with it, and of_dev_node_match already checks for the of_node of the device or of its parent.

Fixes a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
Fixes c6e26ea8c893 ("dpaa_eth: change device used")

FWIW:

--
Florian

maintainer
#5 lore raw
In reply to Vladimir Oltean

From: Vladimir Oltean <[email protected]>
Date: Mon, 25 May 2020 00:22:51 +0300

Quoted 40 lines

From: Vladimir Oltean <[email protected]>

The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver.

All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports.

It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion.

Actually there have already been at least 2 previous attempts to make this work:
- Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
- One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA":
https://patchwork.ozlabs.org/project/netdev/cover/[email protected]/
(I couldn't really figure out which one was supposed to solve the problem and how).

Point being, it looks like this is still pretty much a problem today. On T1040, the /sys/class/net/eth0 symlink currently points to

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpaa-ethernet.0/net/eth0

which pretty much illustrates the problem. The closest of_node we've got is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000, which is what we'd like to be able to reference from DSA as host port.

For of_find_net_device_by_node to find the eth0 port, we would need the parent of the eth0 net_device to not be the "dpaa-ethernet" platform device, but to point 1 level higher, aka the "fsl,fman-memac" node directly. The new sysfs path would look like this:

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net/eth0

Quoted 8 lines

And this is exactly what SET_NETDEV_DEV does. It sets the parent of the net_device. The new parent has an of_node associated with it, and of_dev_node_match already checks for the of_node of the device or of its parent.

Fixes a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
Fixes c6e26ea8c893 ("dpaa_eth: change device used")

Applied and queued up for -stable, thanks.

#6 lore raw
Quoted 49 lines · David Miller

From: Vladimir Oltean <[email protected]>
Date: Mon, 25 May 2020 00:22:51 +0300

Quoted 45 lines

From: Vladimir Oltean <[email protected]>

The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver.

All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports.

It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion.

Actually there have already been at least 2 previous attempts to make this work:
- Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
- One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA":
https://patchwork.ozlabs.org/project/netdev/cover/[email protected]/
(I couldn't really figure out which one was supposed to solve the problem and how).

Point being, it looks like this is still pretty much a problem today. On T1040, the /sys/class/net/eth0 symlink currently points to

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpaa-ethernet.0/net/eth0

which pretty much illustrates the problem. The closest of_node we've got is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000, which is what we'd like to be able to reference from DSA as host port.

For of_find_net_device_by_node to find the eth0 port, we would need the parent of the eth0 net_device to not be the "dpaa-ethernet" platform device, but to point 1 level higher, aka the "fsl,fman-memac" node directly. The new sysfs path would look like this:

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net/eth0

And this is exactly what SET_NETDEV_DEV does. It sets the parent of the net_device. The new parent has an of_node associated with it, and of_dev_node_match already checks for the of_node of the device or of its parent.

Quoted 5 lines
Quoted 3 lines
Fixes a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
Fixes c6e26ea8c893 ("dpaa_eth: change device used")

Applied and queued up for -stable, thanks.

Joakim notified me that this breaks stable trees.
It turns out that my assessment about who-broke-who was wrong. The real Fixes: tag should have been:

Fixes 060ad66f9795 ("dpaa_eth: change DMA device")

which changes the device on which SET_NETDEV_DEV is made.

git describe --tags 060ad66f97954
v5.4-rc3-783-g060ad66f9795

Which means that it shouldn't have been backported to 4.19 and below.

What is the procedure to revert it from those stable trees? Would I need to revert this patch in "net" and apply another one with the correct Fixes: tag?

Thanks,
-Vladimir