Skip to contentSkip to conversation

spi: dw: add reset control

PATCH Superseded Dinh Nguyen 2 participants 3 messages May 26, 2020

Subsystems (2)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 spi: dw: add reset control

Add mechanism to get the reset control and deassert it in order to bring the IP out of reset.

---
v2: use _get_optional_exclusive
put IP back into reset if there was an error in probe function

---
 drivers/spi/spi-dw-mmio.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
drivers/spi/spi-dw-mmio.c +13 -0
index 384a3ab6dc2d..07e015b6d03d 100644
@@ -20,6 +20,7 @@
 #include <linux/acpi.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
+#include <linux/reset.h>
 
 #include "spi-dw.h"
 
@@ -30,6 +31,7 @@ struct dw_spi_mmio {
 	struct clk     *clk;
 	struct clk     *pclk;
 	void           *priv;
+	struct reset_control	*rstc;
 };
 
 #define MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL	0x24
@@ -175,6 +177,14 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_clk;
 
+	/* find an optional reset controller */
+	dwsmmio->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, "spi");
+	if (IS_ERR(dwsmmio->rstc)) {
+		if (PTR_ERR(dwsmmio->rstc) == -EPROBE_DEFER)
+			return PTR_ERR(dwsmmio->rstc);
+	}
+	reset_control_deassert(dwsmmio->rstc);
+
 	dws->bus_num = pdev->id;
 
 	dws->max_freq = clk_get_rate(dwsmmio->clk);
@@ -208,6 +218,8 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 	clk_disable_unprepare(dwsmmio->pclk);
 out_clk:
 	clk_disable_unprepare(dwsmmio->clk);
+	reset_control_assert(dwsmmio->rstc);
+
 	return ret;
 }
 
@@ -219,6 +231,7 @@ static int dw_spi_mmio_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	clk_disable_unprepare(dwsmmio->pclk);
 	clk_disable_unprepare(dwsmmio->clk);
+	reset_control_assert(dwsmmio->rstc);
 
 	return 0;
 }
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 2/2 dt-bindings: snps,dw-apb-ssi: add optional reset property

Add optional reset property.

---
v2: actually document the "resets" and "reset-names" optional properties

---
 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt | 5 +++++
 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +5 -0
index 3ed08ee9feba..c679778612f3 100644
@@ -22,6 +22,9 @@ Optional properties:
 - num-cs : The number of chipselects. If omitted, this will default to 4.
 - reg-io-width : The I/O register width (in bytes) implemented by this
   device.  Supported values are 2 or 4 (the default).
+- resets : contains an entry for each entry in reset-names.
+	   See ../reset/reset.txt for details.
+- reset-names : must contain "spi"
 
 Child nodes as per the generic SPI binding.
 
@@ -37,5 +40,7 @@ Example:
 		num-cs = <2>;
 		cs-gpios = <&gpio0 13 0>,
 			   <&gpio0 14 0>;
+		resets = <&rst SPIM0_RST>;
+		reset-names = "spi";
 	};
 
Signature · 1 line
2.17.1
#2 lore raw
In reply to Dinh Nguyen
Quoted 2 lines · Dinh Nguyen

Add mechanism to get the reset control and deassert it in order to bring the IP out of reset.

...

drivers/spi/spi-dw-mmio.c struct dw_spi_mmio { · line 34

Quoted 4 lines
drivers/spi/spi-dw-mmio.c +1 -0
 	struct clk     *clk;
 	struct clk     *pclk;
 	void           *priv;
+	struct reset_control	*rstc;

I think either you make it one space or you align all the rest members accordingly. I would rather go with former.

...

drivers/spi/spi-dw-mmio.c static int dw_spi_mmio_probe(struct platform_device *pdev)

Quoted 6 lines
drivers/spi/spi-dw-mmio.c +5 -0
+	/* find an optional reset controller */
+	dwsmmio->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, "spi");
+	if (IS_ERR(dwsmmio->rstc)) {
 
+		if (PTR_ERR(dwsmmio->rstc) == -EPROBE_DEFER)
+			return PTR_ERR(dwsmmio->rstc);

If it's other type of errors when reset control, we ignore them...

Why?!

Quoted 1 line
drivers/spi/spi-dw-mmio.c +1 -0
+	}
Signature · 2 lines
With Best Regards,
Andy Shevchenko