Skip to contentSkip to conversation

dt-bindings: auxdisplay: hd44780: Convert to json-schema

PATCH Applied Geert Uytterhoeven 3 participants 3 messages May 14, 2020 – May 28, 2020

Subsystems (2)
lore
Share & tools
lore

Geert Uytterhoeven

author reviewer
#0 lore raw

PATCH 1/1 dt-bindings: auxdisplay: hd44780: Convert to json-schema

Convert the Hitachi HD44780 Character LCD Controller Device Tree binding documentation to json-schema.

---
 .../bindings/auxdisplay/hit,hd44780.txt       | 45 ---------
 .../bindings/auxdisplay/hit,hd44780.yaml      | 96 +++++++++++++++++++
 2 files changed, 96 insertions(+), 45 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt
 create mode 100644 Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt deleted +0 -45
deleted file mode 100644
index 2aa24b8899236882..0000000000000000
@@ -1,45 +0,0 @@
-DT bindings for the Hitachi HD44780 Character LCD Controller
-
-The Hitachi HD44780 Character LCD Controller is commonly used on character LCDs
-that can display one or more lines of text. It exposes an M6800 bus interface,
-which can be used in either 4-bit or 8-bit mode.
-
-Required properties:
-  - compatible: Must contain "hit,hd44780",
-  - data-gpios: Must contain an array of either 4 or 8 GPIO specifiers,
-    referring to the GPIO pins connected to the data signal lines DB0-DB7
-    (8-bit mode) or DB4-DB7 (4-bit mode) of the LCD Controller's bus interface,
-  - enable-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    connected to the "E" (Enable) signal line of the LCD Controller's bus
-    interface,
-  - rs-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    connected to the "RS" (Register Select) signal line of the LCD Controller's
-    bus interface,
-  - display-height-chars: Height of the display, in character cells,
-  - display-width-chars: Width of the display, in character cells.
-
-Optional properties:
-  - rw-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    connected to the "RW" (Read/Write) signal line of the LCD Controller's bus
-    interface,
-  - backlight-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    used for enabling the LCD's backlight,
-  - internal-buffer-width: Internal buffer width (default is 40 for displays
-    with 1 or 2 lines, and display-width-chars for displays with more than 2
-    lines).
-
-Example:
-
-	auxdisplay {
-		compatible = "hit,hd44780";
-
-		data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
-			     <&hc595 1 GPIO_ACTIVE_HIGH>,
-			     <&hc595 2 GPIO_ACTIVE_HIGH>,
-			     <&hc595 3 GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-		rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-
-		display-height-chars = <2>;
-		display-width-chars = <16>;
-	};
Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml new file +96 -0

96 lines not on this page · raw message

Signature · 1 line
2.17.1
#1 lore raw

Hi Rob,

Quoted 3 lines · Geert Uytterhoeven

Convert the Hitachi HD44780 Character LCD Controller Device Tree binding documentation to json-schema.

Do you usually take these ones or should I?

Cheers,
Miguel

maintainer Applied
#2 lore raw
In reply to Geert Uytterhoeven
Quoted 11 lines · Geert Uytterhoeven

Convert the Hitachi HD44780 Character LCD Controller Device Tree binding documentation to json-schema.

---
 .../bindings/auxdisplay/hit,hd44780.txt       | 45 ---------
 .../bindings/auxdisplay/hit,hd44780.yaml      | 96 +++++++++++++++++++
 2 files changed, 96 insertions(+), 45 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt
 create mode 100644 Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml

Applied, thanks!