scsi: use xarray for devices and targets
Subsystems (2)
v3 cover scsi: use xarray for devices and targets
Hi all,
based on the ideas from Doug Gilbert here's now my take on using xarrays for devices and targets.
It revolves around two ideas:
- The scsi target 'channel' and 'id' numbers are never ever used to the full 32 bit range; channels are well below 10, and no driver is using more than 16 bits for the id. So we can reduce the type of 'channel' and 'id' to 16 bits, and use the 32 bit value 'channel << 16 | id' as the index into the target xarray.
- Most SCSI LUNs are below 256 (to ensure compability with older systems). So there we can use the LUN number as the index into the xarray; for larger LUN numbers we'll allocate a separate index.
With these changes we can implement an efficient lookup mechanism, devolving into direct lookup for most cases.
And iteration should be as efficient as the current, list-based, approach.
This patchset now survives basic testing, hence I've removed the 'RFC' tag from the initial patchset.
Changes to v1:
- Fixup __scsi_iterate_devices()
- Include reviews from Johannes
- Minor fixes
- Include comments from Doug
Changes to v2:
- Reshuffle hunks as per suggestion from Johannes
Hannes Reinecke (4):
scsi: convert target lookup to xarray
target_core_pscsi: use __scsi_device_lookup()
scsi: move target device list to xarray
scsi: remove direct device lookup per host
drivers/scsi/hosts.c | 3 +- drivers/scsi/scsi.c | 131 ++++++++++++++++++++++++++++--------- drivers/scsi/scsi_lib.c | 9 ++- drivers/scsi/scsi_scan.c | 66 ++++++++----------- drivers/scsi/scsi_sysfs.c | 42 ++++++++---- drivers/target/target_core_pscsi.c | 8 +-- include/scsi/scsi_device.h | 21 +++--- include/scsi/scsi_host.h | 5 +- 8 files changed, 179 insertions(+), 106 deletions(-)
Signature · 1 line
2.16.4
PATCH v3 1/4 scsi: convert target lookup to xarray
Use an xarray instead of lists for holding the scsi targets. I've also shortened the 'channel' and 'id' values to 16 bit as none of the drivers requires a full 32bit range for either of them, and by shortening them we can use them as the index into the xarray for storing the scsi_target pointer.
--- drivers/scsi/hosts.c | 2 +- drivers/scsi/scsi.c | 32 ++++++++++++++++++++------------ drivers/scsi/scsi_scan.c | 43 ++++++++++++++++--------------------------- drivers/scsi/scsi_sysfs.c | 15 +++++++++++---- include/scsi/scsi_device.h | 4 ++-- include/scsi/scsi_host.h | 2 +- 6 files changed, 51 insertions(+), 47 deletions(-)
drivers/scsi/hosts.c +1 -1
@@ -383,7 +383,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize)spin_lock_init (shost->host_lock); shost->shost_state =SHOST_CREATED ;INIT_LIST_HEAD (&shost->__devices); -INIT_LIST_HEAD (&shost->__targets); +xa_init (&shost->__targets);INIT_LIST_HEAD (&shost->eh_cmd_q);INIT_LIST_HEAD (&shost->starved_list);init_waitqueue_head (&shost->host_wait);
drivers/scsi/scsi.c +20 -12
@@ -575,6 +575,19 @@ struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *shost, }EXPORT_SYMBOL (__scsi_iterate_devices); +/** +* __scsi_target_lookup - find a target based on channel and target id +* @shost: SCSI host pointer +* @channel: channel number of the target +* @id: ID of the target +* +*/ +static struct scsi_target *__scsi_target_lookup (struct Scsi_Host *shost, +u16 channel,u16 id) +{ +return xa_load (&shost->__targets, (channel <<16 ) | id); +} +/** * starget_for_each_device - helper to walk all devices of a target * @starget: target whose devices we want to iterate over.
@@ -701,19 +714,14 @@ EXPORT_SYMBOL(scsi_device_lookup_by_target);* really want to use scsi_device_lookup instead. **/ struct scsi_device *__scsi_device_lookup (struct Scsi_Host *shost, -uint channel,uint id,u64 lun) +u16 channel,u16 id,u64 lun) { -struct scsi_device *sdev; +struct scsi_target *starget; -list_for_each_entry (sdev, &shost->__devices, siblings) { -if (sdev->sdev_state ==SDEV_DEL ) -continue ; -if (sdev->channel == channel && sdev->id == id && - sdev->lun ==lun) -return sdev; - } - -return NULL ; + starget =__scsi_target_lookup (shost, channel, id); +if (!starget) +return NULL ; +return __scsi_device_lookup_by_target (starget, lun); }EXPORT_SYMBOL (__scsi_device_lookup);
@@ -729,7 +737,7 @@ EXPORT_SYMBOL(__scsi_device_lookup);* needs to be released with scsi_device_put once you're done with it. **/ struct scsi_device *scsi_device_lookup (struct Scsi_Host *shost, -uint channel,uint id,u64 lun) +u16 channel,u16 id,u64 lun) {struct scsi_device *sdev;unsigned long flags;
drivers/scsi/scsi_scan.c +16 -27
86 lines not on this page · raw message
drivers/scsi/scsi_sysfs.c +11 -4
@@ -1512,15 +1512,19 @@ void scsi_remove_target(struct device *dev) {struct Scsi_Host *shost =dev_to_shost (dev->parent);struct scsi_target *starget; +unsigned long tid =0 ;unsigned long flags; -restart:spin_lock_irqsave (shost->host_lock, flags); -list_for_each_entry (starget, &shost->__targets, siblings) { + starget =xa_find (&shost->__targets, &tid,ULONG_MAX ,XA_PRESENT ); +while (starget) {if (starget->state ==STARGET_DEL || starget->state ==STARGET_REMOVE || - starget->state ==STARGET_CREATED_REMOVE ) + starget->state ==STARGET_CREATED_REMOVE ) { + starget =xa_find_after (&shost->__targets, &tid, +ULONG_MAX ,XA_PRESENT );continue ; + }if (starget->dev.parent == dev || &starget->dev == dev) {kref_get (&starget->reap_ref);if (starget->state ==STARGET_CREATED )
@@ -1530,7 +1534,10 @@ void scsi_remove_target(struct device *dev)spin_unlock_irqrestore (shost->host_lock, flags);__scsi_remove_target (starget);scsi_target_reap (starget); - goto restart; +spin_lock_irqsave (shost->host_lock, flags); + starget =xa_find_after (&shost->__targets, &tid, +ULONG_MAX ,XA_PRESENT ); +continue ; } }spin_unlock_irqrestore (shost->host_lock, flags);
include/scsi/scsi_device.h +2 -2
@@ -345,9 +345,9 @@ extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);extern int __must_check scsi_device_get (struct scsi_device *);extern void scsi_device_put (struct scsi_device *);extern struct scsi_device *scsi_device_lookup (struct Scsi_Host *, -uint ,uint ,u64 ); +u16 ,u16 ,u64 );extern struct scsi_device *__scsi_device_lookup (struct Scsi_Host *, -uint ,uint ,u64 ); +u16 ,u16 ,u64 );extern struct scsi_device *scsi_device_lookup_by_target (struct scsi_target *,u64 ); extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
include/scsi/scsi_host.h +1 -1
@@ -521,7 +521,7 @@ struct Scsi_Host {* access this list directly from a driver. */ struct list_head __devices; -struct list_head __targets; +struct xarray __targets;struct list_head starved_list;
Signature · 1 line
2.16.4
Re: [PATCH 1/4] scsi: convert target lookup to xarray
The following suggestions are based on trying to _run_ this code ... foolish, I know.
Quoted 21 lines · Hannes Reinecke
Use an xarray instead of lists for holding the scsi targets. I've also shortened the 'channel' and 'id' values to 16 bit as none of the drivers requires a full 32bit range for either of them, and by shortening them we can use them as the index into the xarray for storing the
scsi_targetpointer.Signed-off-by Hannes Reinecke <[email protected]>--- drivers/scsi/hosts.c | 2 +- drivers/scsi/scsi.c | 32 ++++++++++++++++++++------------ drivers/scsi/scsi_scan.c | 43 ++++++++++++++++--------------------------- drivers/scsi/scsi_sysfs.c | 15 +++++++++++---- include/scsi/scsi_device.h | 4 ++-- include/scsi/scsi_host.h | 2 +- 6 files changed, 51 insertions(+), 47 deletions(-)drivers/scsi/hosts.c +0
-0
drivers/scsi/hosts.c struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) · line 386
Quoted 5 lines
drivers/scsi/hosts.c +1
-1@@ -383,7 +383,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize)spin_lock_init (shost->host_lock); shost->shost_state =SHOST_CREATED ;INIT_LIST_HEAD (&shost->__devices); -INIT_LIST_HEAD (&shost->__targets); +xa_init (&shost->__targets);
Please use: xa_init_flags(&shost->__targets, XA_FLAGS_LOCK_IRQ);
If you ever touch (modify?) that array in interrupt context then I believe you need this. See the first 50 or so lines in lib/xarray.c to see that it is used for xarray internals (e.g. xas_lock_type() ).
The xarray interface (include/linux/xarray.h) also has *_irq() and *_bh() variants (e.g. xa_insert(), xa_insert_bh(), xa_insert_irq() ) but setting that flag in the xa_init_flags() call seems to be a safer approach. IOWs it is an alternative to using the *_irq() variants on all the _modifying_ xarray calls.
Quoted 129 lines
drivers/scsi/hosts.c +0
-0INIT_LIST_HEAD (&shost->eh_cmd_q);INIT_LIST_HEAD (&shost->starved_list);init_waitqueue_head (&shost->host_wait);drivers/scsi/scsi.c +20
-12@@ -575,6 +575,19 @@ struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *shost, }EXPORT_SYMBOL (__scsi_iterate_devices); +/** +* __scsi_target_lookup - find a target based on channel and target id +* @shost: SCSI host pointer +* @channel: channel number of the target +* @id: ID of the target +* +*/ +static struct scsi_target *__scsi_target_lookup (struct Scsi_Host *shost, +u16 channel,u16 id) +{ +return xa_load (&shost->__targets, (channel <<16 ) | id); +} +/** * starget_for_each_device - helper to walk all devices of a target * @starget: target whose devices we want to iterate over. @@ -701,19 +714,14 @@ EXPORT_SYMBOL(scsi_device_lookup_by_target);* really want to use scsi_device_lookup instead. **/ struct scsi_device *__scsi_device_lookup (struct Scsi_Host *shost, -uint channel,uint id,u64 lun) +u16 channel,u16 id,u64 lun) { -struct scsi_device *sdev; +struct scsi_target *starget; -list_for_each_entry (sdev, &shost->__devices, siblings) { -if (sdev->sdev_state ==SDEV_DEL ) -continue ; -if (sdev->channel == channel && sdev->id == id && - sdev->lun ==lun) -return sdev; - } - -return NULL ; + starget =__scsi_target_lookup (shost, channel, id); +if (!starget) +return NULL ; +return __scsi_device_lookup_by_target (starget, lun); }EXPORT_SYMBOL (__scsi_device_lookup);@@ -729,7 +737,7 @@ EXPORT_SYMBOL(__scsi_device_lookup);* needs to be released with scsi_device_put once you're done with it. **/ struct scsi_device *scsi_device_lookup (struct Scsi_Host *shost, -uint channel,uint id,u64 lun) +u16 channel,u16 id,u64 lun) {struct scsi_device *sdev;unsigned long flags;drivers/scsi/scsi_scan.c +6
-22@@ -304,11 +304,15 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,return NULL ; } +#define scsi_target_index (s) \ + ((((unsigned long)(s)->channel) << 16) | (s)->id) +static void scsi_target_destroy (struct scsi_target *starget) {struct device *dev = &starget->dev;struct Scsi_Host *shost =dev_to_shost (dev->parent);unsigned long flags; +unsigned long tid =scsi_target_index (starget);BUG_ON (starget->state ==STARGET_DEL ); starget->state =STARGET_DEL ;@@ -316,7 +320,7 @@ static void scsi_target_destroy(struct scsi_target *starget)spin_lock_irqsave (shost->host_lock, flags);if (shost->hostt->target_destroy) shost->hostt->target_destroy (starget); -list_del_init (&starget->siblings); +xa_erase (&shost->__targets, tid);spin_unlock_irqrestore (shost->host_lock, flags);put_device (dev); }@@ -341,27 +345,6 @@ int scsi_is_target_device(const struct device *dev) }EXPORT_SYMBOL (scsi_is_target_device); -static struct scsi_target *__scsi_find_target (struct device *parent, -int channel,uint id) -{ -struct scsi_target *starget, *found_starget =NULL ; -struct Scsi_Host *shost =dev_to_shost (parent); -/* -* Search for an existing target for this sdev. -*/ -list_for_each_entry (starget, &shost->__targets, siblings) { -if (starget->id == id && - starget->channel == channel) { - found_starget = starget; -break ; - } - } -if (found_starget) -get_device (&found_starget->dev); - -return found_starget; -} -/** * scsi_target_reap_ref_release - remove target from visibility * @kref: the reap_ref in the target being released @@ -417,6 +400,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,struct scsi_target *starget;struct scsi_target *found_target;int error, ref_got; +unsigned long tid; starget =kzalloc (size,GFP_KERNEL );if (!starget) {@@ -433,19 +417,24 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, starget->id = id;
drivers/scsi/scsi_scan.c static struct scsi_target *scsi_alloc_target(struct device *parent, · line 426
Quoted 10 lines
drivers/scsi/scsi_scan.c +1
-1starget->channel = channel; starget->can_queue =0 ; -INIT_LIST_HEAD (&starget->siblings);INIT_LIST_HEAD (&starget->devices); starget->state =STARGET_CREATED ; starget->scsi_level =SCSI_2 ; starget->max_target_blocked =SCSI_DEFAULT_TARGET_BLOCKED ; + tid =scsi_target_index (starget); retry:spin_lock_irqsave (shost->host_lock, flags);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Interrupts now masked on this CPU.
drivers/scsi/scsi_scan.c static struct scsi_target *scsi_alloc_target(struct device *parent, · line 433
Quoted 11 lines
drivers/scsi/scsi_scan.c +5
-4- found_target =__scsi_find_target (parent, channel, id); -if (found_target) + found_target =xa_load (&shost->__targets, tid); +if (found_target) { +get_device (&found_target->dev); goto found; - -list_add_tail (&starget->siblings, &shost->__targets); + } +if (xa_insert (&shost->__targets, tid, starget,GFP_KERNEL )) {
You have interrupts masked (on this CPU), you can't use GFP_KERNEL. If you run this code, you will be told :-)
In this case, you must use GFP_ATOMIC.
drivers/scsi/scsi_scan.c static struct scsi_target *scsi_alloc_target(struct device *parent, · line 438
Quoted 5 lines
drivers/scsi/scsi_scan.c +4
-0+dev_printk (KERN_ERR , dev,"target index busy\n" ); +kfree (starget); +return NULL ; + }spin_unlock_irqrestore (shost->host_lock, flags);
^^^^^^^^^^^^^^^^^^^^
Now you can use GFP_KERNEL, if you want.
Quoted 71 lines
drivers/scsi/scsi_scan.c +0
-0/* allocate and add */ transport_setup_device (dev);drivers/scsi/scsi_sysfs.c +11
-4@@ -1512,15 +1512,19 @@ void scsi_remove_target(struct device *dev) {struct Scsi_Host *shost =dev_to_shost (dev->parent);struct scsi_target *starget; +unsigned long tid =0 ;unsigned long flags; -restart:spin_lock_irqsave (shost->host_lock, flags); -list_for_each_entry (starget, &shost->__targets, siblings) { + starget =xa_find (&shost->__targets, &tid,ULONG_MAX ,XA_PRESENT ); +while (starget) {if (starget->state ==STARGET_DEL || starget->state ==STARGET_REMOVE || - starget->state ==STARGET_CREATED_REMOVE ) + starget->state ==STARGET_CREATED_REMOVE ) { + starget =xa_find_after (&shost->__targets, &tid, +ULONG_MAX ,XA_PRESENT );continue ; + }if (starget->dev.parent == dev || &starget->dev == dev) {kref_get (&starget->reap_ref);if (starget->state ==STARGET_CREATED )@@ -1530,7 +1534,10 @@ void scsi_remove_target(struct device *dev)spin_unlock_irqrestore (shost->host_lock, flags);__scsi_remove_target (starget);scsi_target_reap (starget); - goto restart; +spin_lock_irqsave (shost->host_lock, flags); + starget =xa_find_after (&shost->__targets, &tid, +ULONG_MAX ,XA_PRESENT ); +continue ; } }spin_unlock_irqrestore (shost->host_lock, flags);include/scsi/scsi_device.h +2
-2@@ -345,9 +345,9 @@ extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);extern int __must_check scsi_device_get (struct scsi_device *);extern void scsi_device_put (struct scsi_device *);extern struct scsi_device *scsi_device_lookup (struct Scsi_Host *, -uint ,uint ,u64 ); +u16 ,u16 ,u64 );extern struct scsi_device *__scsi_device_lookup (struct Scsi_Host *, -uint ,uint ,u64 ); +u16 ,u16 ,u64 );extern struct scsi_device *scsi_device_lookup_by_target (struct scsi_target *,u64 ); extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,include/scsi/scsi_host.h +1
-1@@ -521,7 +521,7 @@ struct Scsi_Host {* access this list directly from a driver. */ struct list_head __devices; -struct list_head __targets; +struct xarray __targets;struct list_head starved_list;
Re: [PATCH 1/4] scsi: convert target lookup to xarray
Quoted 2 lines · Douglas Gilbert
The following suggestions are based on trying to _run_ this code ... foolish, I know.
Now with the patches I've suggested it runs. So I ran my modprobe, rmmod test building gradually out to 6000 odd devices. It ran for a few minutes then got clobbered by the OOM killer.
Perhaps there are some misplaced xa_destroy()s, I thought. After grep-ing, "un-placed" would be a better description.
So Hannes, for each xa_init*() call made, there needs to be a xa_destroy() at the appropriate place and time, perferably before the OOM killer strikes :-)
Doug Gilbert
Quoted 274 lines · Hannes Reinecke
Quoted 21 lines
Use an xarray instead of lists for holding the scsi targets. I've also shortened the 'channel' and 'id' values to 16 bit as none of the drivers requires a full 32bit range for either of them, and by shortening them we can use them as the index into the xarray for storing the
scsi_targetpointer.Signed-off-by Hannes Reinecke <[email protected]>---
drivers/scsi/hosts.c | 2 +-
drivers/scsi/scsi.c | 32 ++++++++++++++++++++------------ drivers/scsi/scsi_scan.c | 43 ++++++++++++++++--------------------------- drivers/scsi/scsi_sysfs.c | 15 +++++++++++----include/scsi/scsi_device.h| 4 ++--
include/scsi/scsi_host.h | 2 +-6 files changed, 51 insertions(+), 47 deletions(-)drivers/scsi/hosts.c +0
-0drivers/scsi/hosts.c struct Scsi_Host *scsi_host_alloc(struct · line 387
Quoted 6 lines
drivers/scsi/hosts.c +1
-1@@ -383,7 +383,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) spin_lock_init(shost->host_lock); shost->shost_state = SHOST_CREATED; INIT_LIST_HEAD(&shost->__devices); - INIT_LIST_HEAD(&shost->__targets); + xa_init(&shost->__targets);Please use:
xa_init_flags(&shost->__targets, XA_FLAGS_LOCK_IRQ);If you ever touch (modify?) that array in interrupt context then I believe you need this. See the first 50 or so lines in
lib/xarray.cto see that it is used for xarray internals (e.g.xas_lock_type()).The xarray interface (
include/linux/xarray.h) also has*_irq()and*_bh()variants (e.g.xa_insert(),xa_insert_bh(),xa_insert_irq()) but setting that flag in thexa_init_flags()call seems to be a safer approach. IOWs it is an alternative to using the*_irq()variants on all the _modifying_ xarray calls.Quoted 134 lines
drivers/scsi/hosts.c +0
-0INIT_LIST_HEAD(&shost->eh_cmd_q); INIT_LIST_HEAD(&shost->starved_list);
init_waitqueue_head(&shost->host_wait);drivers/scsi/scsi.c +20
-12@@ -575,6 +575,19 @@ struct scsi_device *__scsi_iterate_devices(structScsi_Host *shost, } EXPORT_SYMBOL(__scsi_iterate_devices); +/** +* __scsi_target_lookup - find a target based on channel and target id +* @shost: SCSI host pointer +* @channel: channel number of the target +* @id: ID of the target +* +*/ +static struct scsi_target *__scsi_target_lookup (struct Scsi_Host *shost, + u16 channel, u16 id) +{ + return xa_load(&shost->__targets, (channel << 16) | id); +} + /*** starget_for_each_device - helper to walk all devices of a target * @starget: target whose devices we want to iterate over. @@ -701,19 +714,14 @@ EXPORT_SYMBOL(scsi_device_lookup_by_target);* really want to use scsi_device_lookup instead. **/ struct scsi_device *__scsi_device_lookup(struct Scsi_Host *shost, - uint channel, uint id, u64 lun) + u16 channel, u16 id, u64 lun) { - struct scsi_device *sdev; + struct scsi_target *starget; - list_for_each_entry(sdev, &shost->__devices, siblings) { - if (sdev->sdev_state == SDEV_DEL) - continue; - if (sdev->channel == channel && sdev->id == id && - sdev->lun ==lun) - return sdev; - } - - return NULL; + starget = __scsi_target_lookup(shost, channel, id); + if (!starget) + return NULL; + return __scsi_device_lookup_by_target(starget, lun); } EXPORT_SYMBOL(__scsi_device_lookup);@@ -729,7 +737,7 @@ EXPORT_SYMBOL(__scsi_device_lookup);* needs to be released with scsi_device_put once you're done with it. **/ struct scsi_device *scsi_device_lookup(struct Scsi_Host *shost, - uint channel, uint id, u64 lun) + u16 channel, u16 id, u64 lun) { struct scsi_device *sdev; unsigned long flags;drivers/scsi/scsi_scan.c +7
-23@@ -304,11 +304,15 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, return NULL; } +#define scsi_target_index (s) \ + ((((unsigned long)(s)->channel) << 16) | (s)->id) + static void scsi_target_destroy(struct scsi_target *starget) { struct device *dev = &starget->dev; struct Scsi_Host *shost = dev_to_shost(dev->parent); unsigned long flags; + unsigned long tid = scsi_target_index(starget); BUG_ON(starget->state == STARGET_DEL); starget->state = STARGET_DEL;@@ -316,7 +320,7 @@ static void scsi_target_destroy(struct scsi_target *starget) spin_lock_irqsave(shost->host_lock, flags); if (shost->hostt->target_destroy) shost->hostt->target_destroy(starget); - list_del_init(&starget->siblings); + xa_erase(&shost->__targets, tid); spin_unlock_irqrestore(shost->host_lock, flags); put_device(dev); }@@ -341,27 +345,6 @@ int scsi_is_target_device(const struct device *dev) } EXPORT_SYMBOL(scsi_is_target_device); -static struct scsi_target *__scsi_find_target (struct device *parent, - int channel, uint id) -{ - struct scsi_target *starget, *found_starget = NULL; - struct Scsi_Host *shost = dev_to_shost(parent); - /* - * Search for an existing target for this sdev. - */ - list_for_each_entry(starget, &shost->__targets, siblings) { - if (starget->id == id && - starget->channel == channel) { - found_starget = starget; - break; - } - } - if (found_starget) - get_device(&found_starget->dev); - - return found_starget; -} - /*** scsi_target_reap_ref_release - remove target from visibility * @kref: the reap_ref in the target being released @@ -417,6 +400,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, struct scsi_target *starget; struct scsi_target *found_target; int error, ref_got; + unsigned long tid; starget = kzalloc(size, GFP_KERNEL); if (!starget) {@@ -433,19 +417,24 @@ static struct scsi_target *scsi_alloc_target(structdevice *parent, starget->id = id; starget->channel = channel; starget->can_queue = 0; - INIT_LIST_HEAD(&starget->siblings); INIT_LIST_HEAD(&starget->devices); starget->state = STARGET_CREATED; starget->scsi_level = SCSI_2; starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED; + tid = scsi_target_index(starget);Quoted 2 lines
retry:
spin_lock_irqsave(shost->host_lock, flags);^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Interrupts now masked on this CPU.
Quoted 10 lines
-
found_target=__scsi_find_target(parent, channel, id); - if (found_target)
+found_target=xa_load(&shost->__targets, tid);
+ if (found_target) {
+get_device(&found_target->dev);
goto found;
-
-list_add_tail(&starget->siblings, &shost->__targets); + }
+ if (xa_insert(&shost->__targets, tid, starget, GFP_KERNEL)) {You have interrupts masked (on this CPU), you can't use
GFP_KERNEL. If you run this code, you will be told :-)
In this case, you must useGFP_ATOMIC.Quoted 5 lines
+
dev_printk(KERN_ERR, dev, "target index busy\n"); + kfree(starget);
+ return NULL;
+ }
spin_unlock_irqrestore(shost->host_lock, flags);^^^^^^^^^^^^^^^^^^^^
Now you can useGFP_KERNEL, if you want.Quoted 70 lines
/* allocate and add */
transport_setup_device(dev);drivers/scsi/scsi_sysfs.c +3
-2@@ -1512,15 +1512,19 @@ void scsi_remove_target(struct device *dev) { struct Scsi_Host *shost = dev_to_shost(dev->parent); struct scsi_target *starget; + unsigned long tid = 0; unsigned long flags; -restart: spin_lock_irqsave(shost->host_lock, flags); - list_for_each_entry(starget, &shost->__targets, siblings) { + starget = xa_find(&shost->__targets, &tid, ULONG_MAX, XA_PRESENT); + while (starget) {if (
starget->state==STARGET_DEL||starget->state==STARGET_REMOVE||
-starget->state==STARGET_CREATED_REMOVE)
+starget->state==STARGET_CREATED_REMOVE) { + starget =xa_find_after(&shost->__targets, &tid, + ULONG_MAX, XA_PRESENT); continue;
+ }
if (starget->dev.parent== dev ||&starget->dev== dev) {kref_get(&starget->reap_ref);
if (starget->state==STARGET_CREATED)drivers/scsi/scsi_sysfs.c +4
-1@@ -1530,7 +1534,10 @@ void scsi_remove_target(struct device *dev) spin_unlock_irqrestore(shost->host_lock, flags); __scsi_remove_target(starget); scsi_target_reap(starget); - goto restart; + spin_lock_irqsave(shost->host_lock, flags); + starget = xa_find_after(&shost->__targets, &tid, + ULONG_MAX, XA_PRESENT); + continue; } } spin_unlock_irqrestore(shost->host_lock, flags);include/scsi/scsi_device.h +2
-2@@ -345,9 +345,9 @@ extern struct scsi_device *scsi_device_from_queue(struct request_queue *q); extern int __must_check scsi_device_get(struct scsi_device *); extern void scsi_device_put(struct scsi_device *); extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *, - uint, uint, u64); + u16, u16, u64); extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *, - uint, uint, u64); + u16, u16, u64); extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *, u64);extern struct
scsi_device*__scsi_device_lookup_by_target(structscsi_target*,include/scsi/scsi_host.h +1
-1@@ -521,7 +521,7 @@ struct Scsi_Host {* access this list directly from a driver. */ struct list_head __devices; - struct list_head __targets; + struct xarray __targets; struct list_head starved_list;
Re: [PATCH 1/4] scsi: convert target lookup to xarray
In reply to Hannes Reineckedrivers/scsi/scsi_scan.c static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, · line 308
Quoted 2 lines · Hannes Reinecke
drivers/scsi/scsi_scan.c +2
-0+#define scsi_target_index (s) \ + ((((unsigned long)(s)->channel) << 16) | (s)->id)
Please define scsi_target_index() as an inline function instead of a macro.
drivers/scsi/scsi_scan.c static struct scsi_target *scsi_alloc_target(struct device *parent, · line 437
Quoted 5 lines
drivers/scsi/scsi_scan.c +5
-0+if (xa_insert (&shost->__targets, tid, starget,GFP_KERNEL )) { +dev_printk (KERN_ERR , dev,"target index busy\n" ); +kfree (starget); +return NULL ; + }
So the above code passes GFP_KERNEL to xa_insert() while holding a spinlock? That doesn't seem correct to me. Since xa_insert() provides locking itself, can the spin_lock_irqsave(shost->host_lock, flags) / spin_unlock_irqrestore(shost->host_lock, flags) pair be removed and can the xa_load() and xa_insert() calls be combined into a single xa_insert() call? I think xa_insert() returns -EBUSY if an entry already exists.
Quoted 17 lines
drivers/scsi/scsi_sysfs.c +6
-3-restart:spin_lock_irqsave (shost->host_lock, flags); -list_for_each_entry (starget, &shost->__targets, siblings) { + starget =xa_find (&shost->__targets, &tid,ULONG_MAX ,XA_PRESENT ); +while (starget) {if (starget->state ==STARGET_DEL || starget->state ==STARGET_REMOVE || - starget->state ==STARGET_CREATED_REMOVE ) + starget->state ==STARGET_CREATED_REMOVE ) { + starget =xa_find_after (&shost->__targets, &tid, +ULONG_MAX ,XA_PRESENT );continue ; + }if (starget->dev.parent == dev || &starget->dev == dev) {kref_get (&starget->reap_ref);if (starget->state ==STARGET_CREATED )
drivers/scsi/scsi_sysfs.c void scsi_remove_target(struct device *dev) · line 1542
Quoted 10 lines
drivers/scsi/scsi_sysfs.c +4
-1@@ -1530,7 +1534,10 @@ void scsi_remove_target(struct device *dev)spin_unlock_irqrestore (shost->host_lock, flags);__scsi_remove_target (starget);scsi_target_reap (starget); - goto restart; +spin_lock_irqsave (shost->host_lock, flags); + starget =xa_find_after (&shost->__targets, &tid, +ULONG_MAX ,XA_PRESENT ); +continue ; } }
How about using a for loop instead of a while loop such that the xa_find_after() statement does not have to be duplicated?
Thanks,
Bart.
Re: [PATCH 1/4] scsi: convert target lookup to xarray
Quoted 42 lines · Bart Van Assche
drivers/scsi/scsi_scan.c static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, · line 308
Quoted 2 lines · Hannes Reinecke
drivers/scsi/scsi_scan.c +2
-0+#define scsi_target_index (s) \ + ((((unsigned long)(s)->channel) << 16) | (s)->id)Please define
scsi_target_index()as an inline function instead of a macro.drivers/scsi/scsi_scan.c static struct scsi_target *scsi_alloc_target(struct device *parent, · line 437
Quoted 5 lines
drivers/scsi/scsi_scan.c +5
-0+if (xa_insert (&shost->__targets, tid, starget,GFP_KERNEL )) { +dev_printk (KERN_ERR , dev,"target index busy\n" ); +kfree (starget); +return NULL ; + }So the above code passes
GFP_KERNELtoxa_insert()while holding a spinlock? That doesn't seem correct to me. Sincexa_insert()provides locking itself, can thespin_lock_irqsave(shost->host_lock, flags)/spin_unlock_irqrestore(shost->host_lock, flags)pair be removed and can thexa_load()andxa_insert()calls be combined into a singlexa_insert()call? I thinkxa_insert()returns-EBUSYif an entry already exists.Quoted 22 lines
drivers/scsi/scsi_sysfs.c +7
-4-restart:spin_lock_irqsave (shost->host_lock, flags); -list_for_each_entry (starget, &shost->__targets, siblings) { + starget =xa_find (&shost->__targets, &tid,ULONG_MAX ,XA_PRESENT ); +while (starget) {if (starget->state ==STARGET_DEL || starget->state ==STARGET_REMOVE || - starget->state ==STARGET_CREATED_REMOVE ) + starget->state ==STARGET_CREATED_REMOVE ) { + starget =xa_find_after (&shost->__targets, &tid, +ULONG_MAX ,XA_PRESENT );continue ; + }if (starget->dev.parent == dev || &starget->dev == dev) {kref_get (&starget->reap_ref);if (starget->state ==STARGET_CREATED )@@ -1530,7 +1534,10 @@ void scsi_remove_target(struct device *dev)spin_unlock_irqrestore (shost->host_lock, flags);__scsi_remove_target (starget);scsi_target_reap (starget); - goto restart; +spin_lock_irqsave (shost->host_lock, flags);
Quoted 9 lines
drivers/scsi/scsi_sysfs.c void scsi_remove_target(struct device *dev) · line 1542
Quoted 5 lines
drivers/scsi/scsi_sysfs.c +3
-0+ starget =xa_find_after (&shost->__targets, &tid, +ULONG_MAX ,XA_PRESENT ); +continue ; } }How about using a for loop instead of a while loop such that the
xa_find_after()statement does not have to be duplicated?
Ok, will do for the next round.
Cheers,
Hannes
PATCH v3 2/4 target_core_pscsi: use __scsi_device_lookup()
In reply to Hannes ReineckeInstead of walking the list of devices manually use the helper function to return the device directly.
--- drivers/target/target_core_pscsi.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/target/target_core_pscsi.c +3 -5
@@ -496,11 +496,9 @@ static int pscsi_configure_device(struct se_device *dev) }spin_lock_irq (sh->host_lock); -list_for_each_entry (sd, &sh->__devices, siblings) { -if ((pdv->pdv_channel_id != sd->channel) || - (pdv->pdv_target_id != sd->id) || - (pdv->pdv_lun_id != sd->lun)) -continue ; + sd =__scsi_device_lookup (sh, pdv->pdv_channel_id, + pdv->pdv_target_id, pdv->pdv_lun_id); +if (sd) {/* * Functions will release the held struct scsi_host->host_lock * before calling calling pscsi_add_device_to_list() to register
Signature · 1 line
2.16.4
Re: [PATCH 2/4] target_core_pscsi: use __scsi_device_lookup()
Quoted 2 lines · Hannes Reinecke
Instead of walking the list of devices manually use the helper function to return the device directly.
Re: [PATCH 2/4] target_core_pscsi: use __scsi_device_lookup()
In reply to Hannes ReineckeQuoted 5 lines · Hannes Reinecke
Instead of walking the list of devices manually use the helper function to return the device directly.
Signed-off-by Hannes Reinecke <[email protected]>Reviewed-by Johannes Thumshirn <[email protected]>
PATCH v3 3/4 scsi: move target device list to xarray
In reply to Hannes ReineckeUse xarray for device lookup by target. LUNs below 256 are linear, and can be used directly as the index into the xarray. LUNs above 256 have a distinct LUN format, and are not necessarily linear. They'll be stored in indices above 256 in the xarray, with the next free index in the xarray.
--- drivers/scsi/scsi.c | 32 +++++++++++++++++++------------- drivers/scsi/scsi_lib.c | 9 ++++----- drivers/scsi/scsi_scan.c | 3 +-- drivers/scsi/scsi_sysfs.c | 17 +++++++++++++++-- include/scsi/scsi_device.h | 4 ++-- 5 files changed, 41 insertions(+), 24 deletions(-)
drivers/scsi/scsi.c +19 -13
@@ -601,13 +601,14 @@ static struct scsi_target *__scsi_target_lookup(struct Scsi_Host *shost,void starget_for_each_device (struct scsi_target *starget,void *data,void (*fn)(struct scsi_device *,void *)) { -struct Scsi_Host *shost =dev_to_shost (starget->dev.parent);struct scsi_device *sdev; +unsigned long lun_id =0 ; -shost_for_each_device (sdev, shost) { -if ((sdev->channel == starget->channel) && - (sdev->id == starget->id)) -fn (sdev, data); +xa_for_each (&starget->devices, lun_id, sdev) { +if (scsi_device_get (sdev)) +continue ; +fn (sdev, data); +scsi_device_put (sdev); } }EXPORT_SYMBOL (starget_for_each_device);
@@ -629,14 +630,11 @@ EXPORT_SYMBOL(starget_for_each_device);void __starget_for_each_device (struct scsi_target *starget,void *data,void (*fn)(struct scsi_device *,void *)) { -struct Scsi_Host *shost =dev_to_shost (starget->dev.parent);struct scsi_device *sdev; +unsigned long lun_id =0 ; -__shost_for_each_device (sdev, shost) { -if ((sdev->channel == starget->channel) && - (sdev->id == starget->id)) -fn (sdev, data); - } +xa_for_each (&starget->devices, lun_id, sdev) +fn (sdev, data); }EXPORT_SYMBOL (__starget_for_each_device);
@@ -659,11 +657,19 @@ struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *starget, u64 lun) {struct scsi_device *sdev; +unsigned long lun_idx =256 ; + +if (lun < lun_idx) { + sdev =xa_load (&starget->devices, lun); +if (sdev && sdev->sdev_state ==SDEV_DEL ) + sdev =NULL ; +return sdev; + } -list_for_each_entry (sdev, &starget->devices, same_target_siblings) { +xa_for_each (&starget->devices, lun_idx, sdev) {if (sdev->sdev_state ==SDEV_DEL )continue ; -if (sdev->lun ==lun) +if (sdev->lun == lun)return sdev; }
drivers/scsi/scsi_lib.c +4 -5
@@ -361,9 +361,9 @@ static void scsi_kick_queue(struct request_queue *q)static void scsi_single_lun_run (struct scsi_device *current_sdev) {struct Scsi_Host *shost = current_sdev->host; -struct scsi_device *sdev, *tmp; +struct scsi_device *sdev;struct scsi_target *starget =scsi_target (current_sdev); -unsigned long flags; +unsigned long flags, lun_id =0 ;spin_lock_irqsave (shost->host_lock, flags); starget->starget_sdev_user =NULL ;
@@ -380,8 +380,7 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev)spin_lock_irqsave (shost->host_lock, flags);if (starget->starget_sdev_user) goto out; -list_for_each_entry_safe (sdev, tmp, &starget->devices, - same_target_siblings) { +xa_for_each (&starget->devices, lun_id, sdev) {if (sdev == current_sdev)continue ;if (scsi_device_get (sdev))
@@ -390,7 +389,7 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev)spin_unlock_irqrestore (shost->host_lock, flags);scsi_kick_queue (sdev->request_queue);spin_lock_irqsave (shost->host_lock, flags); - +scsi_device_put (sdev); } out:
drivers/scsi/scsi_scan.c +1 -2
@@ -235,7 +235,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,mutex_init (&sdev->state_mutex); sdev->sdev_state =SDEV_CREATED ;INIT_LIST_HEAD (&sdev->siblings); -INIT_LIST_HEAD (&sdev->same_target_siblings);INIT_LIST_HEAD (&sdev->starved_entry);INIT_LIST_HEAD (&sdev->event_list);spin_lock_init (&sdev->list_lock);
@@ -417,7 +416,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, starget->id = id; starget->channel = channel; starget->can_queue =0 ; -INIT_LIST_HEAD (&starget->devices); +xa_init (&starget->devices); starget->state =STARGET_CREATED ; starget->scsi_level =SCSI_2 ; starget->max_target_blocked =SCSI_DEFAULT_TARGET_BLOCKED ;
drivers/scsi/scsi_sysfs.c +15 -2
@@ -434,6 +434,7 @@ static void scsi_device_cls_release(struct device *class_dev)static void scsi_device_dev_release_usercontext (struct work_struct *work) {struct scsi_device *sdev; +struct scsi_target *starget;struct device *parent;struct list_head *this, *tmp;struct scsi_vpd *vpd_pg80 =NULL , *vpd_pg83 =NULL ;
@@ -441,6 +442,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)unsigned long flags; sdev = container_of(work, struct scsi_device, ew.work); + starget = sdev->sdev_target;scsi_dh_release_device (sdev);
@@ -448,7 +450,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)spin_lock_irqsave (sdev->host->host_lock, flags);list_del (&sdev->siblings); -list_del (&sdev->same_target_siblings); +xa_erase (&starget->devices, sdev->lun_idx);list_del (&sdev->starved_entry);spin_unlock_irqrestore (sdev->host->host_lock, flags);
@@ -1621,7 +1623,18 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev)transport_setup_device (&sdev->sdev_gendev);spin_lock_irqsave (shost->host_lock, flags); -list_add_tail (&sdev->same_target_siblings, &starget->devices); +if (sdev->lun <256 ) { + sdev->lun_idx = sdev->lun; +WARN_ON (xa_insert (&starget->devices, sdev->lun_idx, + sdev,GFP_KERNEL ) <0 ); + }else { +struct xa_limit scsi_lun_limit = { + .min =256 , + .max =UINT_MAX , + }; +WARN_ON (xa_alloc (&starget->devices, &sdev->lun_idx, + sdev, scsi_lun_limit,GFP_KERNEL ) <0 ); + }list_add_tail (&sdev->siblings, &shost->__devices);spin_unlock_irqrestore (shost->host_lock, flags);/*
include/scsi/scsi_device.h +2 -2
@@ -104,7 +104,6 @@ struct scsi_device {/* the next two are protected by the host->host_lock */ struct list_head siblings;/* list of all devices on this host */ -struct list_head same_target_siblings;/* just the devices sharing same target id */ atomic_t device_busy;/* commands actually active on LLDD */ atomic_t device_blocked;/* Device returned QUEUE_FULL. */
@@ -123,6 +122,7 @@ struct scsi_device {unsigned int id, channel;u64 lun; +unsigned int lun_idx;/* Index into target device xarray */ unsigned int manufacturer;/* Manufacturer of device, for using * vendor-specific cmd's */ unsigned sector_size;/* size in bytes */
@@ -285,7 +285,7 @@ enum scsi_target_state {struct scsi_target {struct scsi_device *starget_sdev_user;struct list_head siblings; -struct list_head devices; +struct xarray devices;struct device dev;struct kref reap_ref;/* last put renders target invisible */ unsigned int channel;
Signature · 1 line
2.16.4
Re: [PATCH 3/4] scsi: move target device list to xarray
Quoted 166 lines · Hannes Reinecke
Use xarray for device lookup by target. LUNs below 256 are linear, and can be used directly as the index into the xarray. LUNs above 256 have a distinct LUN format, and are not necessarily linear. They'll be stored in indices above 256 in the xarray, with the next free index in the xarray.
Signed-off-by Hannes Reinecke <[email protected]>Reviewed-by Johannes Thumshirn <[email protected]>--- drivers/scsi/scsi.c | 32 +++++++++++++++++++------------- drivers/scsi/scsi_lib.c | 9 ++++----- drivers/scsi/scsi_scan.c | 3 +-- drivers/scsi/scsi_sysfs.c | 17 +++++++++++++++-- include/scsi/scsi_device.h | 4 ++-- 5 files changed, 41 insertions(+), 24 deletions(-)drivers/scsi/scsi.c +19
-13@@ -601,13 +601,14 @@ static struct scsi_target *__scsi_target_lookup(struct Scsi_Host *shost,void starget_for_each_device (struct scsi_target *starget,void *data,void (*fn)(struct scsi_device *,void *)) { -struct Scsi_Host *shost =dev_to_shost (starget->dev.parent);struct scsi_device *sdev; +unsigned long lun_id =0 ; -shost_for_each_device (sdev, shost) { -if ((sdev->channel == starget->channel) && - (sdev->id == starget->id)) -fn (sdev, data); +xa_for_each (&starget->devices, lun_id, sdev) { +if (scsi_device_get (sdev)) +continue ; +fn (sdev, data); +scsi_device_put (sdev); } }EXPORT_SYMBOL (starget_for_each_device);@@ -629,14 +630,11 @@ EXPORT_SYMBOL(starget_for_each_device);void __starget_for_each_device (struct scsi_target *starget,void *data,void (*fn)(struct scsi_device *,void *)) { -struct Scsi_Host *shost =dev_to_shost (starget->dev.parent);struct scsi_device *sdev; +unsigned long lun_id =0 ; -__shost_for_each_device (sdev, shost) { -if ((sdev->channel == starget->channel) && - (sdev->id == starget->id)) -fn (sdev, data); - } +xa_for_each (&starget->devices, lun_id, sdev) +fn (sdev, data); }EXPORT_SYMBOL (__starget_for_each_device);@@ -659,11 +657,19 @@ struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *starget, u64 lun) {struct scsi_device *sdev; +unsigned long lun_idx =256 ; + +if (lun < lun_idx) { + sdev =xa_load (&starget->devices, lun); +if (sdev && sdev->sdev_state ==SDEV_DEL ) + sdev =NULL ; +return sdev; + } -list_for_each_entry (sdev, &starget->devices, same_target_siblings) { +xa_for_each (&starget->devices, lun_idx, sdev) {if (sdev->sdev_state ==SDEV_DEL )continue ; -if (sdev->lun ==lun) +if (sdev->lun == lun)return sdev; }drivers/scsi/scsi_lib.c +4
-5@@ -361,9 +361,9 @@ static void scsi_kick_queue(struct request_queue *q)static void scsi_single_lun_run (struct scsi_device *current_sdev) {struct Scsi_Host *shost = current_sdev->host; -struct scsi_device *sdev, *tmp; +struct scsi_device *sdev;struct scsi_target *starget =scsi_target (current_sdev); -unsigned long flags; +unsigned long flags, lun_id =0 ;spin_lock_irqsave (shost->host_lock, flags); starget->starget_sdev_user =NULL ;@@ -380,8 +380,7 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev)spin_lock_irqsave (shost->host_lock, flags);if (starget->starget_sdev_user) goto out; -list_for_each_entry_safe (sdev, tmp, &starget->devices, - same_target_siblings) { +xa_for_each (&starget->devices, lun_id, sdev) {if (sdev == current_sdev)continue ;if (scsi_device_get (sdev))@@ -390,7 +389,7 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev)spin_unlock_irqrestore (shost->host_lock, flags);scsi_kick_queue (sdev->request_queue);spin_lock_irqsave (shost->host_lock, flags); - +scsi_device_put (sdev); } out:drivers/scsi/scsi_scan.c +1
-2@@ -235,7 +235,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,mutex_init (&sdev->state_mutex); sdev->sdev_state =SDEV_CREATED ;INIT_LIST_HEAD (&sdev->siblings); -INIT_LIST_HEAD (&sdev->same_target_siblings);INIT_LIST_HEAD (&sdev->starved_entry);INIT_LIST_HEAD (&sdev->event_list);spin_lock_init (&sdev->list_lock);@@ -417,7 +416,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, starget->id = id; starget->channel = channel; starget->can_queue =0 ; -INIT_LIST_HEAD (&starget->devices); +xa_init (&starget->devices); starget->state =STARGET_CREATED ; starget->scsi_level =SCSI_2 ; starget->max_target_blocked =SCSI_DEFAULT_TARGET_BLOCKED ;drivers/scsi/scsi_sysfs.c +3
-1@@ -434,6 +434,7 @@ static void scsi_device_cls_release(struct device *class_dev)static void scsi_device_dev_release_usercontext (struct work_struct *work) {struct scsi_device *sdev; +struct scsi_target *starget;struct device *parent;struct list_head *this, *tmp;struct scsi_vpd *vpd_pg80 =NULL , *vpd_pg83 =NULL ;@@ -441,6 +442,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)unsigned long flags; sdev = container_of(work, struct scsi_device, ew.work); + starget = sdev->sdev_target;scsi_dh_release_device (sdev);@@ -448,7 +450,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)spin_lock_irqsave (sdev->host->host_lock, flags);list_del (&sdev->siblings); -list_del (&sdev->same_target_siblings); +xa_erase (&starget->devices, sdev->lun_idx);list_del (&sdev->starved_entry);spin_unlock_irqrestore (sdev->host->host_lock, flags);
drivers/scsi/scsi_sysfs.c void scsi_sysfs_device_initialize(struct scsi_device *sdev) · line 1629
Quoted 8 lines
drivers/scsi/scsi_sysfs.c +4
-1@@ -1621,7 +1623,18 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev)transport_setup_device (&sdev->sdev_gendev);spin_lock_irqsave (shost->host_lock, flags); -list_add_tail (&sdev->same_target_siblings, &starget->devices); +if (sdev->lun <256 ) { + sdev->lun_idx = sdev->lun; +WARN_ON (xa_insert (&starget->devices, sdev->lun_idx, + sdev,GFP_KERNEL ) <0 );
You have interrupts masked again, so GFP_KERNEL is a non-no.
Also, like most modern kernel libraries, xarray returns 0 for good and a negated errno for an error. If you are going to WARN, I would like to know what that negated errno is.
drivers/scsi/scsi_sysfs.c void scsi_sysfs_device_initialize(struct scsi_device *sdev) · line 1636
Quoted 7 lines
drivers/scsi/scsi_sysfs.c +7
-0+ }else { +struct xa_limit scsi_lun_limit = { + .min =256 , + .max =UINT_MAX , + }; +WARN_ON (xa_alloc (&starget->devices, &sdev->lun_idx, + sdev, scsi_lun_limit,GFP_KERNEL ) <0 );
dito
Quoted 17 lines
drivers/scsi/scsi_sysfs.c +1
-0+ }list_add_tail (&sdev->siblings, &shost->__devices);spin_unlock_irqrestore (shost->host_lock, flags);/* include/scsi/scsi_device.h +0
-1@@ -104,7 +104,6 @@ struct scsi_device {/* the next two are protected by the host->host_lock */ struct list_head siblings;/* list of all devices on this host */ -struct list_head same_target_siblings;/* just the devices sharing same target id */ atomic_t device_busy;/* commands actually active on LLDD */ atomic_t device_blocked;/* Device returned QUEUE_FULL. */
include/scsi/scsi_device.h struct scsi_device { · line 124
Quoted 3 lines
include/scsi/scsi_device.h +0
-0@@ -123,6 +122,7 @@ struct scsi_device {unsigned int id, channel;u64 lun;
Is 'lun' a T10 LUN as in a big-endian array of bytes, converted to a 64 bit native unsigned integer, or is that the Linux 8 no, 16 no, 32 no, 64 bit hack? /* A comment might help there. */
include/scsi/scsi_device.h struct scsi_device { · line 125
Quoted 1 line
include/scsi/scsi_device.h +1
-0+unsigned int lun_idx;/* Index into target device xarray */
Xarray gives you _two_ choices for the type of an index :-) It is either u32 (as used in xa_alloc() and its variants) _or_ unsigned long (as used everywhere else in xarray where an index is needed). So it's definitely 32 bits for xa_alloc() and either 32 or 64 bits for the rest of xarray depending on the machine architecture.
Matthew Wilcox may care to explain why this is ...
By using 'unsigned int lun_idx;' you make a confusing picture even more so. A comment wouldn't hurt there either since the splat the compiler spits out it if you use 'unsigned int' for the second argument to the xa_for_each() macro [which is called 'index'] is not very instructive. [That macro takes the address of the given index and feeds it to xa_find_after() which expects 'unsigned long *' .]
Quoted 13 lines
include/scsi/scsi_device.h +1
-1unsigned int manufacturer;/* Manufacturer of device, for using * vendor-specific cmd's */ unsigned sector_size;/* size in bytes */ @@ -285,7 +285,7 @@ enum scsi_target_state {struct scsi_target {struct scsi_device *starget_sdev_user;struct list_head siblings; -struct list_head devices; +struct xarray devices;struct device dev;struct kref reap_ref;/* last put renders target invisible */ unsigned int channel;
Re: [PATCH 3/4] scsi: move target device list to xarray
Quoted 6 lines · Douglas Gilbert
Quoted 5 lines · Hannes Reinecke
Use xarray for device lookup by target. LUNs below 256 are linear, and can be used directly as the index into the xarray. LUNs above 256 have a distinct LUN format, and are not necessarily linear. They'll be stored in indices above 256 in the xarray, with the next free index in the xarray.
I don't understand why you think this is an improvement over just using an allocating XArray for all LUNs. It seems like more code, and doesn't actually save you any storage space ... ?
Quoted 11 lines
Quoted 11 lines
+++
b/drivers/scsi/scsi.cdrivers/scsi/scsi.c +1
-4@@ -601,13 +601,14 @@ static struct scsi_target *__scsi_target_lookup(struct Scsi_Host *shost,void starget_for_each_device (struct scsi_target *starget,void *data,void (*fn)(struct scsi_device *,void *)) { -struct Scsi_Host *shost =dev_to_shost (starget->dev.parent);struct scsi_device *sdev; +unsigned long lun_id =0 ; -shost_for_each_device (sdev, shost) { -if ((sdev->channel == starget->channel) && - (sdev->id == starget->id))
Quoted 8 lines
drivers/scsi/scsi.c static struct scsi_target *__scsi_target_lookup(struct Scsi_Host *shost, · line 613
Quoted 8 lines
drivers/scsi/scsi.c +5
-1-fn (sdev, data); +xa_for_each (&starget->devices, lun_id, sdev) { +if (scsi_device_get (sdev)) +continue ; +fn (sdev, data); +scsi_device_put (sdev); } }
I appreciate you're implementing the API that's currently in use, but I would recommend open-coding this. Looking at the functions called, lots of them are two-three liners, eg:
static void __scsi_report_device_reset(struct scsi_device *sdev, void *data)
{
sdev->was_reset = 1;
sdev->expecting_cc_ua = 1;
}which would just be more readable:
if (rtn == SUCCESS) {
struct scsi_target *starget = scsi_target(scmd->device);
struct scsi_device *sdev;
unsigned long index;
spin_lock_irqsave(host->host_lock, flags);
xa_for_each(&starget->devices, index, sdev) {
sdev->was_reset = 1;
sdev->expecting_cc_ua = 1;
}
spin_unlock_irqrestore(host->host_lock, flags);
}And then maybe you could make a convincing argument that the spin_lock there could be turned into an xa_lock since that will prevent sdevs from coming & going during the iteration of the device list.
Quoted 10 lines
drivers/scsi/scsi_sysfs.c void scsi_sysfs_device_initialize(struct scsi_device *sdev) · line 1628
Quoted 8 lines
drivers/scsi/scsi_sysfs.c +4
-1@@ -1621,7 +1623,18 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev)transport_setup_device (&sdev->sdev_gendev);spin_lock_irqsave (shost->host_lock, flags); -list_add_tail (&sdev->same_target_siblings, &starget->devices); +if (sdev->lun <256 ) { + sdev->lun_idx = sdev->lun; +WARN_ON (xa_insert (&starget->devices, sdev->lun_idx, + sdev,GFP_KERNEL ) <0 );You have interrupts masked again, so
GFP_KERNELis a non-no.
Actually, I would say this is a great place to not use the host_lock.
+ int err;
...
+ if (sdev->lun < 256) {
+ sdev->lun_idx = sdev->lun;
+ err = xa_insert_irq(&starget->devices, sdev->lun_idx, sdev,
+ GFP_KERNEL);
+ } else {
+ err = xa_alloc_irq(&starget->devices, &sdev->lun_idx, sdev,
+ scsi_lun_limit, GFP_KERNEL);
+ }
+ ... maybe you want to convert scsi_sysfs_device_initialize()
+ to return an errno, although honestly this should never fail ...
spin_lock_irqsave(shost->host_lock, flags);
- list_add_tail(&sdev->same_target_siblings, &starget->devices);
list_add_tail(&sdev->siblings, &shost->__devices);
spin_unlock_irqrestore(shost->host_lock, flags);Quoted 9 lines
include/scsi/scsi_device.h struct scsi_device { · line 125
Quoted 1 line
include/scsi/scsi_device.h +1
-0+unsigned int lun_idx;/* Index into target device xarray */ Xarray gives you _two_ choices for the type of an index :-) It is either u32 (as used in
xa_alloc()and its variants) _or_ unsigned long (as used everywhere else in xarray where an index is needed). So it's definitely 32 bits forxa_alloc()and either 32 or 64 bits for the rest of xarray depending on the machine architecture.
Matthew Wilcox may care to explain why this is ...
Saving space in data structures, mostly. It's not really useful to have 4 billion things in an allocating XArray. Indeed, it's not really useful to have 4 billion of almost anything. So we have XArrays which are indexed by something sensible like page index in file, and they're nice and well-behaved (most people don't create files in excess of 16TB, and those who do don't expect amazing performance when seeking around in them at random because they've lost all caching effects). And then you have people who probably want one scsi device. Maybe a dozen. Possibly a thousand. Definitely not a million. If you get 4 billion scsi devices, something's gone very wrong. You've run out of drive letters, for a start (/dev/sdmzabcd anybody?)
It doesn't cost us anything to just use unsigned long as the index of an XArray, due to how it's constructed. Except in this one place where we need to point to somewhere to store the index so that we can update the index within an sdev before anybody iterating the data structure under RCU can find the uninitialised index.
This patch seems decent enough ... I just think the decision to optimise the layout for LUNs < 256 is a bit odd. But hey, your subsystem, not mine.
Re: [PATCH 3/4] scsi: move target device list to xarray
Quoted 56 lines · Matthew Wilcox
Quoted 6 lines · Douglas Gilbert
Quoted 5 lines · Hannes Reinecke
Use xarray for device lookup by target. LUNs below 256 are linear, and can be used directly as the index into the xarray. LUNs above 256 have a distinct LUN format, and are not necessarily linear. They'll be stored in indices above 256 in the xarray, with the next free index in the xarray.
I don't understand why you think this is an improvement over just using an allocating XArray for all LUNs. It seems like more code, and doesn't actually save you any storage space ... ?
Quoted 11 lines
Quoted 11 lines
+++
b/drivers/scsi/scsi.cdrivers/scsi/scsi.c +1
-4@@ -601,13 +601,14 @@ static struct scsi_target *__scsi_target_lookup(struct Scsi_Host *shost,void starget_for_each_device (struct scsi_target *starget,void *data,void (*fn)(struct scsi_device *,void *)) { -struct Scsi_Host *shost =dev_to_shost (starget->dev.parent);struct scsi_device *sdev; +unsigned long lun_id =0 ; -shost_for_each_device (sdev, shost) { -if ((sdev->channel == starget->channel) && - (sdev->id == starget->id))Quoted 8 lines
drivers/scsi/scsi.c static struct scsi_target *__scsi_target_lookup(struct Scsi_Host *shost, · line 613
Quoted 8 lines
drivers/scsi/scsi.c +5
-1-fn (sdev, data); +xa_for_each (&starget->devices, lun_id, sdev) { +if (scsi_device_get (sdev)) +continue ; +fn (sdev, data); +scsi_device_put (sdev); } }I appreciate you're implementing the API that's currently in use, but I would recommend open-coding this. Looking at the functions called, lots of them are two-three liners, eg:
static void
__scsi_report_device_reset(struct scsi_device *sdev, void *data){ sdev->was_reset = 1; sdev->expecting_cc_ua = 1; }which would just be more readable:
if (rtn == SUCCESS) { struct scsi_target *starget = scsi_target(scmd->device); struct scsi_device *sdev; unsigned long index; spin_lock_irqsave(host->host_lock, flags); xa_for_each(&starget->devices, index, sdev) { sdev->was_reset = 1; sdev->expecting_cc_ua = 1; } spin_unlock_irqrestore(host->host_lock, flags); }
Quoted 3 lines
And then maybe you could make a convincing argument that the
spin_lockthere could be turned into anxa_locksince that will prevent sdevs from coming & going during the iteration of the device list.
I tried that but ran into problems. The xarray model is clear enough, but there is a (non-atomic) enumerated state in each sdev (struct scsi_device object (pointer)) that is protected by a mutex. I was unable to escape those pesky (but very useful) warnings out of the depths of xarray that the locking was awry. When I've burrowed into xarray.c I have usually found that it was correct. So now I regard it as a pesky feature :-)
That said, in my work on the sg driver rewrite, I got rid of all the explicit spinlocks in favour of xa_locks and that works fine, IMO. The locking in the SCSI ML is a more complex beast. Maybe it doesn't need to be ...
Hannes, why not make sdev_state an atomic and get rid of that mutex?
Virtually none of this code is on the command fastpath, but Ming Lei found that trimming down the size and position of members in sdev could lead to performance improvements.
These changes may improve the time taken to stabilize a system with large disk arrays attached at startup, shutdown and when there are disruptions or errors.
Quoted 41 lines
Quoted 10 lines
drivers/scsi/scsi_sysfs.c void scsi_sysfs_device_initialize(struct scsi_device *sdev) · line 1628
Quoted 8 lines
drivers/scsi/scsi_sysfs.c +4
-1@@ -1621,7 +1623,18 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev)transport_setup_device (&sdev->sdev_gendev);spin_lock_irqsave (shost->host_lock, flags); -list_add_tail (&sdev->same_target_siblings, &starget->devices); +if (sdev->lun <256 ) { + sdev->lun_idx = sdev->lun; +WARN_ON (xa_insert (&starget->devices, sdev->lun_idx, + sdev,GFP_KERNEL ) <0 );You have interrupts masked again, so
GFP_KERNELis a non-no.Actually, I would say this is a great place to not use the
host_lock.(quoted diff) +11
-1+ int err; + if (sdev->lun < 256) { + sdev->lun_idx = sdev->lun; + err = xa_insert_irq(&starget->devices, sdev->lun_idx, sdev, + GFP_KERNEL); + } else { + err = xa_alloc_irq(&starget->devices, &sdev->lun_idx, sdev, + scsi_lun_limit, GFP_KERNEL); + } + ... maybe you want to convert scsi_sysfs_device_initialize() + to return an errno, although honestly this should never fail ... spin_lock_irqsave(shost->host_lock, flags); - list_add_tail(&sdev->same_target_siblings, &starget->devices); list_add_tail(&sdev->siblings, &shost->__devices); spin_unlock_irqrestore(shost->host_lock, flags);Quoted 11 lines
include/scsi/scsi_device.h struct scsi_device { · line 125
Quoted 3 lines
include/scsi/scsi_device.h +1
-0+unsigned int lun_idx;/* Index into target device xarray */ Xarray gives you _two_ choices for the type of an index :-) It is either u32 (as used in
xa_alloc()and its variants) _or_ unsigned long (as used everywhere else in xarray where an index is needed). So it's definitely 32 bits forxa_alloc()and either 32 or 64 bits for the rest of xarray depending on the machine architecture.
Matthew Wilcox may care to explain why this is ...
Quoted 11 lines
Saving space in data structures, mostly. It's not really useful to have 4 billion things in an allocating XArray. Indeed, it's not really useful to have 4 billion of almost anything. So we have XArrays which are indexed by something sensible like page index in file, and they're nice and well-behaved (most people don't create files in excess of 16TB, and those who do don't expect amazing performance when seeking around in them at random because they've lost all caching effects). And then you have people who probably want one scsi device. Maybe a dozen. Possibly a thousand. Definitely not a million. If you get 4 billion scsi devices, something's gone very wrong. You've run out of drive letters, for a start (
/dev/sdmzabcdanybody?)
no_uld=1 # RAID cards might do this on its physicals so smartmontools
# can check them
Then you only have to worry about /dev/sg<n> and /dev/bsg/<hctl) numbers or tuples going through the roof :-)
Quoted 9 lines
It doesn't cost us anything to just use unsigned long as the index of an XArray, due to how it's constructed. Except in this one place where we need to point to somewhere to store the index so that we can update the index within an sdev before anybody iterating the data structure under RCU can find the uninitialised index.
This patch seems decent enough ... I just think the decision to optimise the layout for LUNs < 256 is a bit odd. But hey, your subsystem, not mine.
Hannes has the most experience in that area. He has only been using xarray for a week or so (I think). There is something important missing from his
patchset: any xa_destroy() calls :-)
Doug Gilbert
Re: [PATCH 3/4] scsi: move target device list to xarray
Quoted 11 lines · Douglas Gilbert
Quoted 3 lines
And then maybe you could make a convincing argument that the
spin_lockthere could be turned into anxa_locksince that will prevent sdevs from coming & going during the iteration of the device list.I tried that but ran into problems. The xarray model is clear enough, but there is a (non-atomic) enumerated state in each sdev (struct
scsi_deviceobject (pointer)) that is protected by a mutex. I was unable to escape those pesky (but very useful) warnings out of the depths of xarray that the locking was awry. When I've burrowed intoxarray.cI have usually found that it was correct. So now I regard it as a pesky feature :-)
Fascinating. So much of SCSI has to be IRQ-safe, and yet you can't look at the sdev state outside process context ...
Quoted 7 lines
Quoted 3 lines
This patch seems decent enough ... I just think the decision to optimise the layout for LUNs < 256 is a bit odd. But hey, your subsystem, not mine.
Hannes has the most experience in that area. He has only been using xarray for a week or so (I think). There is something important missing from his
patchset: anyxa_destroy()calls :-)
They're not necessarily needed. If the XArray is empty, there's nothing to do.
Re: [PATCH 3/4] scsi: move target device list to xarray
In reply to Douglas GilbertQuoted 70 lines · Douglas Gilbert
Quoted 57 lines · Matthew Wilcox
Quoted 6 lines · Douglas Gilbert
Quoted 5 lines · Hannes Reinecke
Use xarray for device lookup by target. LUNs below 256 are linear, and can be used directly as the index into the xarray. LUNs above 256 have a distinct LUN format, and are not necessarily linear. They'll be stored in indices above 256 in the xarray, with the next free index in the xarray.
I don't understand why you think this is an improvement over just using an allocating XArray for all LUNs. It seems like more code, and doesn't actually save you any storage space ... ?
Quoted 12 lines
Quoted 12 lines
+++
b/drivers/scsi/scsi.cdrivers/scsi/scsi.c +1
-4@@ -601,13 +601,14 @@ static struct scsi_target *__scsi_target_lookup(struct Scsi_Host *shost, void starget_for_each_device(struct scsi_target *starget, void *data, void (*fn)(struct scsi_device *, void *)) { - struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); struct scsi_device *sdev; + unsigned long lun_id = 0; - shost_for_each_device(sdev, shost) { - if ((sdev->channel == starget->channel) && - (sdev->id == starget->id))Quoted 8 lines
drivers/scsi/scsi.c static struct scsi_target *__scsi_target_lookup(struct Scsi_Host *shost, · line 613
Quoted 8 lines
drivers/scsi/scsi.c +5
-1- fn(sdev, data); + xa_for_each(&starget->devices, lun_id, sdev) { + if (scsi_device_get(sdev)) + continue; + fn(sdev, data); + scsi_device_put(sdev); } }I appreciate you're implementing the API that's currently in use, but I would recommend open-coding this. Looking at the functions called, lots of them are two-three liners, eg:
static void
__scsi_report_device_reset(struct scsi_device *sdev, void *data){
sdev->was_reset= 1;
sdev->expecting_cc_ua= 1;
}which would just be more readable:
if (rtn == SUCCESS) {
structscsi_target*starget =scsi_target(scmd->device); structscsi_device*sdev;
unsigned long index;
spin_lock_irqsave(host->host_lock, flags);xa_for_each(&starget->devices, index, sdev){sdev->was_reset= 1;
sdev->expecting_cc_ua= 1;
}
spin_unlock_irqrestore(host->host_lock, flags); }Quoted 3 lines
And then maybe you could make a convincing argument that the
spin_lockthere could be turned into anxa_locksince that will prevent sdevs from coming & going during the iteration of the device list.I tried that but ran into problems. The xarray model is clear enough, but there is a (non-atomic) enumerated state in each sdev (struct
scsi_deviceobject (pointer)) that is protected by a mutex. I was unable to escape those pesky (but very useful) warnings out of the depths of xarray that the locking was awry. When I've burrowed intoxarray.cI have usually found that it was correct. So now I regard it as a pesky feature :-)
Quoted 5 lines
That said, in my work on the sg driver rewrite, I got rid of all the explicit spinlocks in favour of
xa_locksand that works fine, IMO. The locking in the SCSI ML is a more complex beast. Maybe it doesn't need to be ...
This whole code will need to be updated once we decided to move to xarrays.
At this time I'm just trying to get the minimal patches in; cleanups can (and will) follow later.
Quoted 11 lines
Hannes, why not make
sdev_statean atomic and get rid of that mutex?Virtually none of this code is on the command fastpath, but Ming Lei found that trimming down the size and position of members in sdev could lead to performance improvements.
These changes may improve the time taken to stabilize a system with large disk arrays attached at startup, shutdown and when there are disruptions or errors.
Virtually none is not identical to none.
And locking is an audit unto itself, so I would _not_ attempt to revise the locking model at the same time when changing the lookup.
Plan is to first change the lookup to xarray, and _then_ audit the locking such than we can move the xa_lock() in appropriate places.
Quoted 24 lines
Quoted 24 lines
Quoted 11 lines
drivers/scsi/scsi_sysfs.c void scsi_sysfs_device_initialize(struct · line 1629
Quoted 9 lines
drivers/scsi/scsi_sysfs.c +4
-1@@ -1621,7 +1623,18 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev) transport_setup_device(&sdev->sdev_gendev); spin_lock_irqsave(shost->host_lock, flags); - list_add_tail(&sdev->same_target_siblings, &starget->devices); + if (sdev->lun < 256) { + sdev->lun_idx = sdev->lun; + WARN_ON(xa_insert(&starget->devices, sdev->lun_idx, + sdev, GFP_KERNEL) < 0);You have interrupts masked again, so
GFP_KERNELis a non-no.Actually, I would say this is a great place to not use the
host_lock.+ int err;
...
+ if (sdev->lun< 256) {
+sdev->lun_idx=sdev->lun;
+ err =xa_insert_irq(&starget->devices, sdev->lun_idx, sdev, + GFP_KERNEL);
+ } else {
+ err = xa_alloc_irq(&starget->devices,&sdev->lun_idx, sdev, +scsi_lun_limit,GFP_KERNEL);
+ }
Quoted 8 lines
Quoted 8 lines
+ ... maybe you want to convert
scsi_sysfs_device_initialize()+ to return an errno, although honestly this should never fail ...spin_lock_irqsave(shost->host_lock, flags);
-list_add_tail(&sdev->same_target_siblings, &starget->devices);list_add_tail(&sdev->siblings, &shost->__devices);spin_unlock_irqrestore(shost->host_lock, flags);
See above.
Yes, it is worth revisiting.
But in a next step, not now.
Quoted 35 lines
Quoted 10 lines
Quoted 9 lines
include/scsi/scsi_device.h struct scsi_device { · line 125
Quoted 1 line
include/scsi/scsi_device.h +1
-0+ unsigned int lun_idx; /* Index into target device xarray */Xarray gives you _two_ choices for the type of an index :-) It is either u32 (as used in
xa_alloc()and its variants) _or_ unsigned long (as used everywhere else in xarray where an index is needed). So it's definitely 32 bits forxa_alloc()and either 32 or 64 bits for the rest of xarray depending on the machine architecture.
Matthew Wilcox may care to explain why this is ...Quoted 11 lines
Saving space in data structures, mostly. It's not really useful to have 4 billion things in an allocating XArray. Indeed, it's not really useful to have 4 billion of almost anything. So we have XArrays which are indexed by something sensible like page index in file, and they're nice and well-behaved (most people don't create files in excess of 16TB, and those who do don't expect amazing performance when seeking around in them at random because they've lost all caching effects). And then you have people who probably want one scsi device. Maybe a dozen. Possibly a thousand. Definitely not a million. If you get 4 billion scsi devices, something's gone very wrong. You've run out of drive letters, for a start (
/dev/sdmzabcdanybody?)no_uld=1 # RAID cards might do this on its physicals so
smartmontools# can check themThen you only have to worry about /dev/sg<n> and /dev/bsg/<hctl) numbers or tuples going through the roof :-)
Quoted 6 lines
It doesn't cost us anything to just use unsigned long as the index of an XArray, due to how it's constructed. Except in this one place where we need to point to somewhere to store the index so that we can update the index within an sdev before anybody iterating the data structure under RCU can find the uninitialised index.
Quoted 8 lines
Quoted 3 lines
This patch seems decent enough ... I just think the decision to optimise the layout for LUNs < 256 is a bit odd. But hey, your subsystem, not mine.
Hannes has the most experience in that area. He has only been using xarray for a week or so (I think). There is something important missing from his
patchset: anyxa_destroy()calls :-)
Yes! I know!
Working on it.
Cheers,
Hannes
Signature · 4 lines
Dr. Hannes Reinecke Teamlead Storage & Networking [email protected] +49 911 74053 688 SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer
Re: [PATCH 3/4] scsi: move target device list to xarray
In reply to Matthew WilcoxQuoted 8 lines · Matthew Wilcox
Quoted 6 lines · Douglas Gilbert
Quoted 5 lines · Hannes Reinecke
Use xarray for device lookup by target. LUNs below 256 are linear, and can be used directly as the index into the xarray. LUNs above 256 have a distinct LUN format, and are not necessarily linear. They'll be stored in indices above 256 in the xarray, with the next free index in the xarray.
Quoted 4 lines
I don't understand why you think this is an improvement over just using an allocating XArray for all LUNs. It seems like more code, and doesn't actually save you any storage space ... ?
The LUN range is 64 bit.
I was under the impression that xarray can only handle up to unsigned long; which probably would work for 64bit systems, but there _are_ users running on 32 bit, and they get patently unhappy when we have to tell them 'sorry, not for you'.
At least I _know_ that I'll get complaints if I try a stunt like this.
If you can make xarray 64 bit on all systems, sure, I'm game.
Cheers,
Hannes
Signature · 4 lines
Dr. Hannes Reinecke Teamlead Storage & Networking [email protected] +49 911 74053 688 SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer
Re: [PATCH 3/4] scsi: move target device list to xarray
Quoted 13 lines · Hannes Reinecke
Quoted 8 lines · Matthew Wilcox
Quoted 6 lines · Douglas Gilbert
Quoted 5 lines · Hannes Reinecke
Use xarray for device lookup by target. LUNs below 256 are linear, and can be used directly as the index into the xarray. LUNs above 256 have a distinct LUN format, and are not necessarily linear. They'll be stored in indices above 256 in the xarray, with the next free index in the xarray.
Quoted 4 lines
I don't understand why you think this is an improvement over just using an allocating XArray for all LUNs. It seems like more code, and doesn't actually save you any storage space ... ?
Quoted 5 lines
The LUN range is 64 bit.
I was under the impression that xarray can only handle up to unsigned long; which probably would work for 64bit systems, but there _are_ users running on 32 bit, and they get patently unhappy when we have to tell them 'sorry, not for you'.
I meant just use xa_alloc() for everything instead of using xa_insert for 0-255.
Re: [PATCH 3/4] scsi: move target device list to xarray
Quoted 14 lines · Matthew Wilcox
Quoted 13 lines · Hannes Reinecke
Quoted 12 lines · Matthew Wilcox
Quoted 6 lines · Douglas Gilbert
Quoted 5 lines · Hannes Reinecke
Use xarray for device lookup by target. LUNs below 256 are linear, and can be used directly as the index into the xarray. LUNs above 256 have a distinct LUN format, and are not necessarily linear. They'll be stored in indices above 256 in the xarray, with the next free index in the xarray.
I don't understand why you think this is an improvement over just using an allocating XArray for all LUNs. It seems like more code, and doesn't actually save you any storage space ... ?
Quoted 9 lines
Quoted 5 lines
The LUN range is 64 bit.
I was under the impression that xarray can only handle up to unsigned long; which probably would work for 64bit systems, but there _are_ users running on 32 bit, and they get patently unhappy when we have to tell them 'sorry, not for you'.I meant just use
xa_alloc()for everything instead of usingxa_insertfor 0-255.
But then I'll have to use xa_find() to get to the actual element as the 1:1 mapping between SCSI LUN and array index is lost. And seeing that most storage arrays will expose only up to 256 LUNs I thought this was a good improvement on lookup. Of course, this only makes sense if xa_load() is more efficient than xa_find(). If not then of course it's a bit futile.
Cheers,
Hannes
Signature · 4 lines
Dr. Hannes Reinecke Teamlead Storage & Networking [email protected] +49 911 74053 688 SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer
Re: [PATCH 3/4] scsi: move target device list to xarray
Quoted 9 lines · Hannes Reinecke
Quoted 3 lines
I meant just use
xa_alloc()for everything instead of usingxa_insertfor 0-255.But then I'll have to use
xa_find()to get to the actual element as the 1:1 mapping between SCSI LUN and array index is lost.
And seeing that most storage arrays will expose only up to 256 LUNs I thought this was a good improvement on lookup.
Of course, this only makes sense ifxa_load()is more efficient thanxa_find(). If not then of course it's a bit futile.
xa_load() is absolutely more efficient than xa_find(). It's just a question of whether it matters ;-) Carry on ...
Re: [PATCH 3/4] scsi: move target device list to xarray
Quoted 11 lines · Matthew Wilcox
Quoted 9 lines · Hannes Reinecke
Quoted 3 lines
I meant just use
xa_alloc()for everything instead of usingxa_insertfor 0-255.But then I'll have to use
xa_find()to get to the actual element as the 1:1 mapping between SCSI LUN and array index is lost.
And seeing that most storage arrays will expose only up to 256 LUNs I thought this was a good improvement on lookup.
Of course, this only makes sense ifxa_load()is more efficient thanxa_find(). If not then of course it's a bit futile.
Quoted 3 lines
xa_load()is absolutely more efficient thanxa_find(). It's just a question of whether it matters ;-) Carry on ...
Thanks. I will.
BTW, care to update the documentation?
* Return: 0 on success, -ENOMEM if memory could not be allocated or
* -EBUSY if there are no free entries in @limit.
*/
int __xa_alloc(struct xarray *xa, u32 *id, void *entry,
struct xa_limit limit, gfp_t gfp)
{
XA_STATE(xas, xa, 0);
if (WARN_ON_ONCE(xa_is_advanced(entry)))
return -EINVAL;
if (WARN_ON_ONCE(!xa_track_free(xa)))
return -EINVAL;So looks as if the documentation is in need of updating to cover -EINVAL.
And, please, state somewhere that whenever you want to use xa_alloc() you _need_ to specify XA_ALLOC_FLAGS in xa_init_flags(), otherwise you trip across the above.
It's not entirely obvious, and took me the better half of a day to figure out.
Cheers,
Hannes
Signature · 4 lines
Dr. Hannes Reinecke Teamlead Storage & Networking [email protected] +49 911 74053 688 SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer
Re: [PATCH 3/4] scsi: move target device list to xarray
Quoted 32 lines · Hannes Reinecke
Quoted 11 lines · Matthew Wilcox
Quoted 9 lines · Hannes Reinecke
Quoted 3 lines
I meant just use
xa_alloc()for everything instead of usingxa_insertfor 0-255.But then I'll have to use
xa_find()to get to the actual element as the 1:1 mapping between SCSI LUN and array index is lost.
And seeing that most storage arrays will expose only up to 256 LUNs I thought this was a good improvement on lookup.
Of course, this only makes sense ifxa_load()is more efficient thanxa_find(). If not then of course it's a bit futile.Quoted 3 lines
xa_load()is absolutely more efficient thanxa_find(). It's just a question of whether it matters ;-) Carry on ...Thanks. I will.
BTW, care to update the documentation?
* Return: 0 on success,
-ENOMEMif memory could not be allocated or
*-EBUSYif there are no free entries in @limit.
*/
int __xa_alloc(struct xarray *xa, u32 *id, void *entry,
structxa_limitlimit,gfp_tgfp){ XA_STATE(xas, xa, 0); if (WARN_ON_ONCE(xa_is_advanced(entry))) return -EINVAL; if (WARN_ON_ONCE(!xa_track_free(xa))) return -EINVAL;
Quoted 4 lines
So looks as if the documentation is in need of updating to cover
-EINVAL. And, please, state somewhere that whenever you want to usexa_alloc()you _need_ to specifyXA_ALLOC_FLAGSinxa_init_flags(), otherwise you trip across the above.
Like this?
Allocating XArrays
------------------
If you use DEFINE_XARRAY_ALLOC() to define the XArray, or initialise it by passing ``XA_FLAGS_ALLOC`` to xa_init_flags(), the XArray changes to track whether entries are in use or not.
You can call xa_alloc() to store the entry at an unused index in the XArray. If you need to modify the array from interrupt context, you can use xa_alloc_bh() or xa_alloc_irq() to disable interrupts while allocating the ID.
Quoted 2 lines
It's not entirely obvious, and took me the better half of a day to figure out.
Really? You get a nice WARN_ON and backtrace so you can see where you went wrong ... What could I change to make this easier?
Re: [PATCH 3/4] scsi: move target device list to xarray
Quoted 43 lines · Matthew Wilcox
Quoted 32 lines · Hannes Reinecke
Quoted 11 lines · Matthew Wilcox
Quoted 9 lines · Hannes Reinecke
Quoted 3 lines
I meant just use
xa_alloc()for everything instead of usingxa_insertfor 0-255.But then I'll have to use
xa_find()to get to the actual element as the 1:1 mapping between SCSI LUN and array index is lost.
And seeing that most storage arrays will expose only up to 256 LUNs I thought this was a good improvement on lookup.
Of course, this only makes sense ifxa_load()is more efficient thanxa_find(). If not then of course it's a bit futile.Quoted 3 lines
xa_load()is absolutely more efficient thanxa_find(). It's just a question of whether it matters ;-) Carry on ...Thanks. I will.
BTW, care to update the documentation?
* Return: 0 on success,
-ENOMEMif memory could not be allocated or
*-EBUSYif there are no free entries in @limit.
*/
int __xa_alloc(struct xarray *xa, u32 *id, void *entry,
structxa_limitlimit,gfp_tgfp){ XA_STATE(xas, xa, 0); if (WARN_ON_ONCE(xa_is_advanced(entry))) return -EINVAL; if (WARN_ON_ONCE(!xa_track_free(xa))) return -EINVAL;Quoted 4 lines
So looks as if the documentation is in need of updating to cover
-EINVAL. And, please, state somewhere that whenever you want to usexa_alloc()you _need_ to specifyXA_ALLOC_FLAGSinxa_init_flags(), otherwise you trip across the above.Like this?
Allocating XArrays
------------------
Quoted 10 lines
If you use
DEFINE_XARRAY_ALLOC()to define the XArray, or initialise it by passing ``XA_FLAGS_ALLOC`` toxa_init_flags(), the XArray changes to track whether entries are in use or not.You can call
xa_alloc()to store the entry at an unused index in the XArray. If you need to modify the array from interrupt context, you can usexa_alloc_bh()orxa_alloc_irq()to disable interrupts while allocating the ID.
What I'm missing is the connection between the first paragraph and the second.
It starts with 'If you use ...', making no indication what would happen if you don't.
And the second paragraph just says '... to store the entry ...'; is never said anything about tracking entries.
Why not simply append this sentenct to the second paragraph:
In order to use xa_alloc() you need to pass the XA_FLAGS_ALLOC when calling xa_init_flags()l
Quoted 6 lines
Quoted 2 lines
It's not entirely obvious, and took me the better half of a day to figure out.
Really? You get a nice
WARN_ONand backtrace so you can see where you went wrong ... What could I change to make this easier?
It _could_ have said 'You forgot to pass XA_ALLOC_FLAGS in xa_init_flags()'. Then it would've been immediately obvious without having to delve into xarray code.
Cheers,
Hannes
Signature · 4 lines
Dr. Hannes Reinecke Teamlead Storage & Networking [email protected] +49 911 74053 688 SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer
Re: [PATCH 3/4] scsi: move target device list to xarray
In reply to Hannes ReineckeQuoted 32 lines · Hannes Reinecke
Quoted 11 lines · Matthew Wilcox
Quoted 9 lines · Hannes Reinecke
Quoted 3 lines
I meant just use
xa_alloc()for everything instead of usingxa_insertfor 0-255.But then I'll have to use
xa_find()to get to the actual element as the 1:1 mapping between SCSI LUN and array index is lost.
And seeing that most storage arrays will expose only up to 256 LUNs I thought this was a good improvement on lookup.
Of course, this only makes sense ifxa_load()is more efficient thanxa_find(). If not then of course it's a bit futile.Quoted 3 lines
xa_load()is absolutely more efficient than xa_find(). It's just a question of whether it matters ;-) Carry on ...Thanks. I will.
BTW, care to update the documentation?
* Return: 0 on success,
-ENOMEMif memory could not be allocated or
*-EBUSYif there are no free entries in @limit.
*/
int __xa_alloc(struct xarray *xa, u32 *id, void *entry,
structxa_limitlimit,gfp_tgfp)
{
XA_STATE(xas, xa, 0);if (WARN_ON_ONCE(xa_is_advanced(entry)))
return-EINVAL;
if (WARN_ON_ONCE(!xa_track_free(xa)))
return-EINVAL;
Quoted 5 lines
So looks as if the documentation is in need of updating to cover
-EINVAL.
And, please, state somewhere that whenever you want to usexa_alloc()you _need_ to specifyXA_ALLOC_FLAGSinxa_init_flags(), otherwise you trip across the above.It's not entirely obvious, and took me the better half of a day to figure out.
Ditto for me. At the time I did relay my frustration to Matthew who did address it in the documentation. Another one is that xa_find*() requires the XA_PRESENT mark, even when you are not using marks (or haven't yet learnt about them ...). A clearer demarcation of the two xarray modes (i.e. either the user supplies the index, or xarray does) would be helpful. That mode impacts which parts of the xarray interface are used, for example in the sg driver rewrite, xarrays are used for all collections but if memory serves, there isn't a single xa_load() or xa_store() call.
But writing technical documentation is difficult. Very few third parties step up to help, leaving the designer/implementer to do it. And it is extremely difficult for someone who knows the code backwards (and where the skeletons are buried) to stand on their heads and present the information in a pedagogic manner.
Also traditional code documentation uses 7 bit ASCII text and "ACSII art" in a sort of nod to earlier generations of programmers. Surely more modern techniques, including colour diagrams and even animations, should now be encouraged. Maybe when compilers start accepting html :-)
Doug Gilbert
P.S. I have tried to practice what I preach:
http://sg.danny.cz/sg/sg_v40.html
PATCH v3 4/4 scsi: remove direct device lookup per host
In reply to Hannes ReineckeDrop the per-host device list for direct lookup and iterate over the targets and devices xarrays instead.
As both are now using xarrays the lookup is more efficient as we can use the provided indices based on the HCTL id to do a direct lookup instead of traversing lists.
--- drivers/scsi/hosts.c | 1 - drivers/scsi/scsi.c | 67 +++++++++++++++++++++++++++++++++++++++++----- drivers/scsi/scsi_scan.c | 20 ++++++++------ drivers/scsi/scsi_sysfs.c | 10 ++----- include/scsi/scsi_device.h | 13 +++++---- include/scsi/scsi_host.h | 3 +-- 6 files changed, 84 insertions(+), 30 deletions(-)
drivers/scsi/hosts.c +0 -1
@@ -382,7 +382,6 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) shost->host_lock = &shost->default_lock;spin_lock_init (shost->host_lock); shost->shost_state =SHOST_CREATED ; -INIT_LIST_HEAD (&shost->__devices);xa_init (&shost->__targets);INIT_LIST_HEAD (&shost->eh_cmd_q);INIT_LIST_HEAD (&shost->starved_list);
drivers/scsi/scsi.c +61 -6
85 lines not on this page · raw message
drivers/scsi/scsi_scan.c +12 -8
@@ -234,7 +234,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, sdev->channel = starget->channel;mutex_init (&sdev->state_mutex); sdev->sdev_state =SDEV_CREATED ; -INIT_LIST_HEAD (&sdev->siblings);INIT_LIST_HEAD (&sdev->starved_entry);INIT_LIST_HEAD (&sdev->event_list);spin_lock_init (&sdev->list_lock);
@@ -1847,17 +1846,22 @@ EXPORT_SYMBOL(scsi_scan_host);void scsi_forget_host (struct Scsi_Host *shost) { +struct scsi_target *starget;struct scsi_device *sdev;unsigned long flags; +unsigned long tid =0 ; - restart:spin_lock_irqsave (shost->host_lock, flags); -list_for_each_entry (sdev, &shost->__devices, siblings) { -if (sdev->sdev_state ==SDEV_DEL ) -continue ; -spin_unlock_irqrestore (shost->host_lock, flags); -__scsi_remove_device (sdev); - goto restart; +xa_for_each (&shost->__targets, tid, starget) { +unsigned long lun_id =0 ; + +xa_for_each (&starget->devices, lun_id, sdev) { +if (sdev->sdev_state ==SDEV_DEL ) +continue ; +spin_unlock_irqrestore (shost->host_lock, flags); +__scsi_remove_device (sdev); +spin_lock_irqsave (shost->host_lock, flags); + } }spin_unlock_irqrestore (shost->host_lock, flags); }
drivers/scsi/scsi_sysfs.c +2 -8
@@ -449,7 +449,6 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) parent = sdev->sdev_gendev.parent;spin_lock_irqsave (sdev->host->host_lock, flags); -list_del (&sdev->siblings);xa_erase (&starget->devices, sdev->lun_idx);list_del (&sdev->starved_entry);spin_unlock_irqrestore (sdev->host->host_lock, flags);
@@ -1476,19 +1475,16 @@ static void __scsi_remove_target(struct scsi_target *starget)struct Scsi_Host *shost =dev_to_shost (starget->dev.parent);unsigned long flags;struct scsi_device *sdev; +unsigned long lun_idx =0 ;spin_lock_irqsave (shost->host_lock, flags); - restart: -list_for_each_entry (sdev, &shost->__devices, siblings) { +xa_for_each (&starget->devices, lun_idx, sdev) {/* * We cannot call scsi_device_get() here, as * we might've been called from rmmod() causing * scsi_device_get() to fail the module_is_live() * check. */ -if (sdev->channel != starget->channel || - sdev->id != starget->id) -continue ;if (sdev->sdev_state ==SDEV_DEL || sdev->sdev_state ==SDEV_CANCEL || !get_device (&sdev->sdev_gendev))
@@ -1497,7 +1493,6 @@ static void __scsi_remove_target(struct scsi_target *starget)scsi_remove_device (sdev);put_device (&sdev->sdev_gendev);spin_lock_irqsave (shost->host_lock, flags); - goto restart; }spin_unlock_irqrestore (shost->host_lock, flags); }
@@ -1635,7 +1630,6 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev)WARN_ON (xa_alloc (&starget->devices, &sdev->lun_idx, sdev, scsi_lun_limit,GFP_KERNEL ) <0 ); } -list_add_tail (&sdev->siblings, &shost->__devices);spin_unlock_irqrestore (shost->host_lock, flags);/* * device can now only be removed via __scsi_remove_device() so hold
include/scsi/scsi_device.h +8 -5
@@ -102,9 +102,6 @@ struct scsi_device {struct Scsi_Host *host;struct request_queue *request_queue; -/* the next two are protected by the host->host_lock */ -struct list_head siblings;/* list of all devices on this host */ -atomic_t device_busy;/* commands actually active on LLDD */ atomic_t device_blocked;/* Device returned QUEUE_FULL. */
@@ -376,6 +373,10 @@ extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *, (sdev); \ (sdev) = __scsi_iterate_devices((shost), (sdev))) +/* only exposed to implement shost_for_each_device */ +struct scsi_device *__scsi_iterate_devices_unlocked (struct Scsi_Host *, +struct scsi_device *); +/** * __shost_for_each_device - iterate over all devices of a host (UNLOCKED) * @sdev: the &struct scsi_device to use as a cursor
@@ -389,8 +390,10 @@ extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,* device list in interrupt context. Otherwise you really want to use * shost_for_each_device instead. */ -#define __shost_for_each_device (sdev, shost) \ - list_for_each_entry((sdev), &((shost)->__devices), siblings) +#define __shost_for_each_device (sdev, shost) \ + for((sdev) = __scsi_iterate_devices_unlocked((shost), NULL); \ + (sdev); \ + (sdev) = __scsi_iterate_devices_unlocked((shost),(sdev)))extern int scsi_change_queue_depth (struct scsi_device *,int );extern int scsi_track_queue_full (struct scsi_device *,int );
include/scsi/scsi_host.h +1 -2
@@ -520,9 +520,8 @@ struct Scsi_Host {* their __ prefixed variants with the lock held. NEVER * access this list directly from a driver. */ -struct list_head __devices;struct xarray __targets; - +struct list_head starved_list;spinlock_t default_lock;
Signature · 1 line
2.16.4
Re: [PATCHv3 0/4] scsi: use xarray ... scsi_alloc_target()
In reply to Hannes ReineckeHannes,
I believe scsi_alloc_target() is broken in the found_target case. For starters starget is created, built and _not_ put in the xarray, hence it is leaked? Seems to me that the code shouldn't go as far as it does before it detects the found_target case.
What I'm seeing in testing (script attached) after applying my patches outlined in earlier posts (second attachment) is that LUN 0 is missing on all targets within a host apart from target_id==0 . For example:
# modprobe scsi_debug ptype=0x9 no_uld=1 max_luns=2 num_tgts=2 # lsscsi -gs [0:0:0:0] comms Linux scsi_debug 0189 - /dev/sg0 - [0:0:0:1] comms Linux scsi_debug 0189 - /dev/sg1 - [0:0:1:1] comms Linux scsi_debug 0189 - /dev/sg2 - [N:0:1:1] disk INTEL SSDPEKKF256G7L__1 /dev/nvme0n1 - 256GB
# sg_luns /dev/sg2
Lun list length = 16 which imples 2 lun entries
Report luns [select_report=0x0]:
0000000000000000
0001000000000000So where did [0:0:1:0] go? The response to REPORT LUNS says it should be there.
I thought about jumping into scsi_alloc_target() but it is horribly complicated, so I'll let you deal with it :-)
Doug Gilbert
drivers/scsi/hosts.c +3 -1
@@ -345,6 +345,7 @@ static void scsi_host_dev_release(struct device *dev)if (parent)put_device (parent); +xa_destroy (&shost->__targets);kfree (shost); }
@@ -382,7 +383,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) shost->host_lock = &shost->default_lock;spin_lock_init (shost->host_lock); shost->shost_state =SHOST_CREATED ; -xa_init (&shost->__targets); +xa_init_flags (&shost->__targets,XA_FLAGS_LOCK_IRQ );INIT_LIST_HEAD (&shost->eh_cmd_q);INIT_LIST_HEAD (&shost->starved_list);init_waitqueue_head (&shost->host_wait);
@@ -501,6 +502,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) fail_index_remove:ida_simple_remove (&host_index_ida, shost->host_no); fail_kfree: +xa_destroy (&shost->__targets);kfree (shost);return NULL ; }
drivers/scsi/scsi_scan.c +7 -3
@@ -309,6 +309,7 @@ static void scsi_target_destroy(struct scsi_target *starget) {struct device *dev = &starget->dev;struct Scsi_Host *shost =dev_to_shost (dev->parent); +struct scsi_target *e_starg;unsigned long flags;unsigned long tid =scsi_target_index (starget);
@@ -318,8 +319,10 @@ static void scsi_target_destroy(struct scsi_target *starget)spin_lock_irqsave (shost->host_lock, flags);if (shost->hostt->target_destroy) shost->hostt->target_destroy (starget); -xa_erase (&shost->__targets, tid); + e_starg =xa_erase (&shost->__targets, tid);spin_unlock_irqrestore (shost->host_lock, flags); +if (e_starg != starget) +pr_err ("%s: bad xa_erase()\n" , __func__);put_device (dev); }
@@ -328,6 +331,7 @@ static void scsi_target_dev_release(struct device *dev)struct device *parent = dev->parent;struct scsi_target *starget =to_scsi_target (dev); +xa_destroy (&starget->devices);kfree (starget);put_device (parent); }
@@ -415,7 +419,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, starget->id = id; starget->channel = channel; starget->can_queue =0 ; -xa_init (&starget->devices); +xa_init_flags (&starget->devices,XA_FLAGS_LOCK_IRQ ); starget->state =STARGET_CREATED ; starget->scsi_level =SCSI_2 ; starget->max_target_blocked =SCSI_DEFAULT_TARGET_BLOCKED ;
@@ -428,7 +432,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,get_device (&found_target->dev); goto found; } -if (xa_insert (&shost->__targets, tid, starget,GFP_KERNEL )) { +if (xa_insert (&shost->__targets, tid, starget,GFP_ATOMIC )) {dev_printk (KERN_ERR , dev,"target index busy\n" );kfree (starget);return NULL ;
drivers/scsi/scsi_sysfs.c +6 -3
@@ -434,6 +434,7 @@ static void scsi_device_cls_release(struct device *class_dev)static void scsi_device_dev_release_usercontext (struct work_struct *work) {struct scsi_device *sdev; +struct scsi_device *e_sdev;struct scsi_target *starget;struct device *parent;struct list_head *this, *tmp;
@@ -449,9 +450,11 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) parent = sdev->sdev_gendev.parent;spin_lock_irqsave (sdev->host->host_lock, flags); -xa_erase (&starget->devices, sdev->lun_idx); + e_sdev =xa_erase (&starget->devices, sdev->lun_idx);list_del (&sdev->starved_entry);spin_unlock_irqrestore (sdev->host->host_lock, flags); +if (e_sdev != sdev) +pr_err ("%s: bad sdev erase\n" , __func__);cancel_work_sync (&sdev->event_work);
@@ -1621,14 +1624,14 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev)if (sdev->lun <256 ) { sdev->lun_idx = sdev->lun;WARN_ON (xa_insert (&starget->devices, sdev->lun_idx, - sdev,GFP_KERNEL ) <0 ); + sdev,GFP_ATOMIC ) <0 ); }else {struct xa_limit scsi_lun_limit = { .min =256 , .max =UINT_MAX , };WARN_ON (xa_alloc (&starget->devices, &sdev->lun_idx, - sdev, scsi_lun_limit,GFP_KERNEL ) <0 ); + sdev, scsi_lun_limit,GFP_ATOMIC ) <0 ); }spin_unlock_irqrestore (shost->host_lock, flags);/*