Skip to contentSkip to conversation

ARM: dts: aspeed: rainier: Add line-name checkstop

PATCH Applied [email protected] 2 participants 2 messages May 29, 2020 – Jun 2, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: aspeed: rainier: Add line-name checkstop

From: Ben Tyner <[email protected]>

Rainier uses GPIO B6 as the checkstop GPIO. Define the line-name so that this GPIO can be found by name.

---
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +1 -1
index 01db238ce741..61723d3131d2 100644
@@ -73,7 +73,7 @@
 &gpio0 {
 	gpio-line-names =
 	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","checkstop","",
 	/*C0-C7*/	"","","","","","","","",
 	/*D0-D7*/	"","","","","","","","",
 	/*E0-E7*/	"","","","","","","","",
Signature · 1 line
2.20.1
maintainer Applied
#1 lore raw
Quoted 7 lines · On Fri, 29 May 2020 at 17:22, <[email protected]> wrote:

From: Ben Tyner <[email protected]>

Rainier uses GPIO B6 as the checkstop GPIO. Define the line-name so that this GPIO can be found by name.

Merged into dev-5.4

Quoted 20 lines
---
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +1 -2
index 01db238ce741..61723d3131d2 100644
@@ -73,7 +73,7 @@
 &gpio0 {
        gpio-line-names =
        /*A0-A7*/       "","","","","","","","",
-       /*B0-B7*/       "","","","","","","","",
+       /*B0-B7*/       "","","","","","","checkstop","",
        /*C0-C7*/       "","","","","","","","",
        /*D0-D7*/       "","","","","","","","",
        /*E0-E7*/       "","","","","","","","",
--

2.20.1