pwm: img: call pm_runtime_put in pm_runtime_get_sync failed case
PATCH 1/1 pwm: img: call pm_runtime_put in pm_runtime_get_sync failed case
Even in failed case of pm_runtime_get_sync, the usage_count is incremented. In order to keep the usage_count with correct value call appropriate put.
Signed-off-by Navid Emamdoost <[email protected]>
--- drivers/pwm/pwm-img.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/pwm/pwm-img.c +6 -2
@@ -129,8 +129,10 @@ static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, duty =DIV_ROUND_UP (timebase * duty_ns, period_ns); ret =pm_runtime_get_sync (chip->dev); -if (ret <0 ) +if (ret <0 ) { +pm_runtime_put_autosuspend (chip->dev);return ret; + } val =img_pwm_readl (pwm_chip,PWM_CTRL_CFG ); val &= ~(PWM_CTRL_CFG_DIV_MASK <<PWM_CTRL_CFG_DIV_SHIFT (pwm->hwpwm));
@@ -331,8 +333,10 @@ static int img_pwm_remove(struct platform_device *pdev)int ret; ret =pm_runtime_get_sync (&pdev->dev); -if (ret <0 ) +if (ret <0 ) { +pm_runtime_put (&pdev->dev);return ret; + }for (i =0 ; i < pwm_chip->chip.npwm; i++) { val =img_pwm_readl (pwm_chip,PWM_CTRL_CFG );
Signature · 1 line
2.17.1