Skip to contentSkip to conversation

arm: dts: aspeed: tacoma: remove checkstop gpio-key

PATCH Applied [email protected] 2 participants 2 messages Jun 1, 2020 – Jun 2, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: dts: aspeed: tacoma: remove checkstop gpio-key

From: Ben Tyner <[email protected]>

Attention handler will monitor the checkstop gpio via the character device interface so it needs to not be defined.

---
 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 6 ------
 1 file changed, 6 deletions(-)
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +0 -6
index ba1f4cb7e..d2850956c 100644
@@ -39,12 +39,6 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
-			label = "checkstop";
-			gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(E, 3)>;
-		};
-
 		ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
Signature · 1 line
2.20.1
maintainer Applied
#1 lore raw
Quoted 7 lines · On Mon, 1 Jun 2020 at 18:20, <[email protected]> wrote:

From: Ben Tyner <[email protected]>

Attention handler will monitor the checkstop gpio via the character device interface so it needs to not be defined.

Merged into dev-5.4

Quoted 24 lines
---
 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 6 ------
 1 file changed, 6 deletions(-)
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +0 -7
index ba1f4cb7e..d2850956c 100644
@@ -39,12 +39,6 @@
        gpio-keys {
                compatible = "gpio-keys";
 
-               checkstop {
-                       label = "checkstop";
-                       gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>;
-                       linux,code = <ASPEED_GPIO(E, 3)>;
-               };
-
                ps0-presence {
                        label = "ps0-presence";
                        gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
--

2.20.1