11-dm-mpath.rules: Fix udev rule processing during coldplug
PATCH 1/1 11-dm-mpath.rules: Fix udev rule processing during coldplug
From: Martin Wilck <[email protected]>
DM_SUBSYSTEM_UDEV_FLAG0 is used to indicate that upper layer udev rules don't need to be processed for multipath maps, e.g. for map reloads.
However, this can fail if maps were created during initrd processing, but udev processing for the change events of these maps didn't complete because udevd was killed to switch root. So, in the coldplug case, play safe and process the rules once more.
--- multipath/11-dm-mpath.rules | 5 +++++ 1 file changed, 5 insertions(+)
multipath/11-dm-mpath.rules +5 -0
@@ -52,8 +52,13 @@ LABEL="mpath_action" # something that should be reacted upon since it would be useless extra work. # It's exactly mpath's job to provide *seamless* device access to any of the # paths that are available underneath. +# Exception: On cold-plug, if the map had already been set up before, +# do process upper layers, because rule processing may not necessarily have +# completed during initrd processing. +ACTION=="add", ENV{.MPATH_DEVICE_READY_OLD}=="1", GOTO="process_reload" ENV{DM_SUBSYSTEM_UDEV_FLAG0}=="1", \ ENV{DM_ACTIVATION}="0", ENV{MPATH_UNCHANGED}="1" +LABEL="process_reload" # For path failed or reinstated events, unset DM_ACTIVATION. # This is similar to the DM_SUBSYSTEM_UDEV_FLAG0 case above.
Signature · 1 line
2.26.2
Quoted 6 lines · On Tue, Jun 02, 2020 at 05:54:43PM +0200, [email protected] wrote:
From: Martin Wilck <[email protected]>
DM_SUBSYSTEM_UDEV_FLAG0is used to indicate that upper layer udev rules don't need to be processed for multipath maps, e.g. for map reloads.
Quoted 6 lines
However, this can fail if maps were created during initrd processing, but udev processing for the change events of these maps didn't complete because udevd was killed to switch root. So, in the coldplug case, play safe and process the rules once more.
Signed-off-by Martin Wilck <[email protected]>
Quoted 24 lines
--- multipath/11-dm-mpath.rules | 5 +++++ 1 file changed, 5 insertions(+)multipath/11-dm-mpath.rules +5
-0@@ -52,8 +52,13 @@ LABEL="mpath_action" # something that should be reacted upon since it would be useless extra work. # It's exactly mpath's job to provide *seamless* device access to any of the # paths that are available underneath. +# Exception: On cold-plug, if the map had already been set up before, +# do process upper layers, because rule processing may not necessarily have +# completed during initrd processing. +ACTION=="add", ENV{.MPATH_DEVICE_READY_OLD}=="1", GOTO="process_reload" ENV{DM_SUBSYSTEM_UDEV_FLAG0}=="1", \ ENV{DM_ACTIVATION}="0", ENV{MPATH_UNCHANGED}="1" +LABEL="process_reload" # For path failed or reinstated events, unset DM_ACTIVATION. # This is similar to the DM_SUBSYSTEM_UDEV_FLAG0 case above.Signature · 1 line
2.26.2
Hi Ben, Hi Christophe,
Quoted 14 lines · Benjamin Marzinski
Quoted 13 lines · On Tue, Jun 02, 2020 at 05:54:43PM +0200, [email protected] wrote:
From: Martin Wilck <[email protected]>
DM_SUBSYSTEM_UDEV_FLAG0is used to indicate that upper layer udev rules don't need to be processed for multipath maps, e.g. for map reloads.However, this can fail if maps were created during initrd processing,
but udev processing for the change events of these maps didn't complete because udevd was killed to switch root. So, in the coldplug
case, play safe and process the rules once more.
Quoted 2 lines
Quoted 1 line
Signed-off-by Martin Wilck <[email protected]>Reviewed-by Benjamin Marzinski <[email protected]>
This patch was wrong. It doesn't hurt but it also doesn't help; it simply has no effect because DM_SUBSYSTEM_UDEV_FLAG0
is never set on "add" uevents.
Christophe, please don't apply it.
Martin