Skip to contentSkip to conversation

configs/rock64_defconfig: remove defconfig

PATCH New Romain Naour 3 participants 5 messages May 31, 2020 – Nov 12, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 configs/rock64_defconfig: remove defconfig

The rock64 defconfig is currently broken [1][2] since a while due to incompatibility between uboot-2017.09-rockchip-ayufan fork and pylibfdt. Even with the latest uboot-2017.09-rockchip-ayufan fork version [3], it doesn't build.

The original submitter tried the uboot upstream rock64-rk3328_defconfig but the board doesn't boot [4].

In order to not release 2020.05 with a broken defconfig, let's remove it. It can be re-added later once the uboot issue has been resolved.

[1] 2020.05-rc2: https://gitlab.com/buildroot.org/buildroot/-/jobs/563613273
[2] 2020.02: https://gitlab.com/buildroot.org/buildroot/-/jobs/548596102
[3] https://github.com/ayufan-rock64/linux-u-boot/releases/tag/2017.09-rockchip-ayufan-1065-g95f6152134
[4] http://lists.busybox.net/pipermail/buildroot/2020-May/282164.html

Cc Micha? ?yszczek <[email protected]>
---
 .gitlab-ci.yml                                |  1 -
 DEVELOPERS                                    |  2 -
 board/pine64/rock64/extlinux.conf             |  4 -
 board/pine64/rock64/genimage.cfg              | 23 -----
 ...328-needs-itb-image-to-boot-properly.patch | 32 -------
 board/pine64/rock64/post-build.sh             |  9 --
 board/pine64/rock64/readme.txt                | 95 -------------------
 configs/rock64_defconfig                      | 38 --------
 8 files changed, 204 deletions(-)
 delete mode 100644 board/pine64/rock64/extlinux.conf
 delete mode 100644 board/pine64/rock64/genimage.cfg
 delete mode 100644 board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
 delete mode 100755 board/pine64/rock64/post-build.sh
 delete mode 100644 board/pine64/rock64/readme.txt
 delete mode 100644 configs/rock64_defconfig
.gitlab-ci.yml +0 -1
index fa8e077a07..cbca2ef667 100644
@@ -317,7 +317,6 @@ raspberrypi4_defconfig: { extends: .defconfig }
 raspberrypi_defconfig: { extends: .defconfig }
 riotboard_defconfig: { extends: .defconfig }
 roc_pc_rk3399_defconfig: { extends: .defconfig }
-rock64_defconfig: { extends: .defconfig }
 roseapplepi_defconfig: { extends: .defconfig }
 s6lx9_microboard_defconfig: { extends: .defconfig }
 sheevaplug_defconfig: { extends: .defconfig }
DEVELOPERS +0 -2
index 88050349db..68977895e3 100644
@@ -1819,8 +1819,6 @@ F:	package/libavl/
 
 N:	Micha? ?yszczek <[email protected]>
 F:	board/altera/socrates_cyclone5/
-F:	board/pine64/rock64
-F:	configs/rock64_defconfig
 F:	configs/socrates_cyclone5_defconfig
 F:	package/netifrc/
 F:	package/openrc/
board/pine64/rock64/extlinux.conf deleted +0 -4
deleted file mode 100644
index bf71982a9f..0000000000
@@ -1,4 +0,0 @@
-label rock64-buildroot
-  kernel /boot/Image
-  devicetree /boot/rk3328-rock64.dtb
-  append console=ttyS2,1500000n8 root=/dev/mmcblk0p1 ro rootwait
board/pine64/rock64/genimage.cfg deleted +0 -23
deleted file mode 100644
index 0b5a0d8804..0000000000
@@ -1,23 +0,0 @@
-image sdcard.img {
-    hdimage {
-    }
-
-    partition uboot-spl {
-        in-partition-table = "no"
-        image = "u-boot-tpl-spl.img"
-        offset = 32768 # 512 * 0x40 from start of sd card
-    }
-
-    partition uboot {
-        in-partition-table = "no"
-        image = "u-boot.itb"
-        offset = 262144 # 512 * 0x200 from start of sd card
-    }
-
-    partition rootfs {
-        partition-type = 0x83
-        bootable = "yes"
-        image = "rootfs.ext2"
-        size = 500M
-    }
-}
board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch deleted +0 -32
deleted file mode 100644
index 2d35b78daa..0000000000
@@ -1,32 +0,0 @@
-From 211bf049084e6e374dac253138fa813682910146 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Micha=C5=82=20=C5=81yszczek?= <[email protected]>
-Date: Tue, 5 Feb 2019 22:08:54 +0100
-Subject: [PATCH] Makefile: rk3328 needs itb image to boot properly
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Micha? ?yszczek <[email protected]>
----
- Makefile | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/Makefile b/Makefile
-index 8086f3c93e..a6425b5b03 100644
---- a/Makefile
-+++ b/Makefile
-@@ -799,6 +799,11 @@ ifneq ($(BUILD_ROM),)
- ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
- endif
- 
-+# rk3328 needs itb image to boot properly
-+ifeq ($(CONFIG_ROCKCHIP_RK3328),y)
-+ALL-y += u-boot.itb
-+endif
-+
- # enable combined SPL/u-boot/dtb rules for tegra
- ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
- ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
--- 
-2.18.1
-
board/pine64/rock64/post-build.sh deleted +0 -9
deleted file mode 100755
index 26b53cba8e..0000000000
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-MKIMAGE=$HOST_DIR/bin/mkimage
-BOARD_DIR="$(dirname $0)"
-
-$MKIMAGE -n rk3328 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
-cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl.bin > $BINARIES_DIR/u-boot-tpl-spl.img
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/pine64/rock64/readme.txt deleted +0 -95

95 lines not on this page · raw message

configs/rock64_defconfig deleted +0 -38
deleted file mode 100644
index 30bf12c061..0000000000
@@ -1,38 +0,0 @@
-BR2_aarch64=y
-BR2_GLOBAL_PATCH_DIR="board/pine64/rock64/patches"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS2"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rock64/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rock64/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.19"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-rock64"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v1.4"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/ayufan-rock64/linux-u-boot.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="2017.09-rockchip-ayufan-1035-gd646df03ac"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock64-rk3328"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin tpl/u-boot-tpl.bin"
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Signature · 1 line
2.25.4
#1 lore raw

PATCH 1/1 configs/rock64_defconfig: remove defconfig

Hi All,

Le 31/05/2020 ? 16:34, Romain Naour a ?crit?:

Quoted 8 lines

The rock64 defconfig is currently broken [1][2] since a while due to incompatibility between uboot-2017.09-rockchip-ayufan fork and pylibfdt. Even with the latest uboot-2017.09-rockchip-ayufan fork version [3], it doesn't build.

The original submitter tried the uboot upstream rock64-rk3328_defconfig but the board doesn't boot [4].

Quoted 7 lines

In order to not release 2020.05 with a broken defconfig, let's remove it. It can be re-added later once the uboot issue has been resolved.

[1] 2020.05-rc2: https://gitlab.com/buildroot.org/buildroot/-/jobs/563613273
[2] 2020.02: https://gitlab.com/buildroot.org/buildroot/-/jobs/548596102
[3] https://github.com/ayufan-rock64/linux-u-boot/releases/tag/2017.09-rockchip-ayufan-1065-g95f6152134
[4] http://lists.busybox.net/pipermail/buildroot/2020-May/282164.html

Actually this issue is not related to the uboot fork but the official 2017.09 (and maybe previous releases)

The following defconfig allow to reproduce the issue:

BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lion-rk3368"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
BR2_TARGET_UBOOT_SPL=y

The issue is trigged as soon as CONFIG_TPL is selected in uboot configuration.

On my pc (Fedora), the build fail while executing tools/dtoc/dtoc script due to the default python interpreter (#!/usr/bin/python). But as soon it is fixed, the build fail latter with the same error as uboot's rock64_defconfig [1]

In order to build we need at least uboot 2017.11 that contain the directory script/dtc/libfdt.

The fallback defined by UBOOT_FIXUP_LIBFDT_INCLUDE [2] doesn't work as expected with the python binding (libfdt.py).

It's not clear why fdt_check_header is not defined in libfdt.py.

NameError: global name 'fdt_check_header' is not defined

[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/563613273
[2] https://git.buildroot.net/buildroot/tree/boot/uboot/uboot.mk?h=2020.05-rc3#n225

Best regards,
Romain

Quoted 283 lines
Cc Micha? ?yszczek <[email protected]>
---
 .gitlab-ci.yml                                |  1 -
 DEVELOPERS                                    |  2 -
 board/pine64/rock64/extlinux.conf             |  4 -
 board/pine64/rock64/genimage.cfg              | 23 -----
 ...328-needs-itb-image-to-boot-properly.patch | 32 -------
 board/pine64/rock64/post-build.sh             |  9 --
 board/pine64/rock64/readme.txt                | 95 -------------------
 configs/rock64_defconfig                      | 38 --------
 8 files changed, 204 deletions(-)
 delete mode 100644 board/pine64/rock64/extlinux.conf
 delete mode 100644 board/pine64/rock64/genimage.cfg
 delete mode 100644 board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
 delete mode 100755 board/pine64/rock64/post-build.sh
 delete mode 100644 board/pine64/rock64/readme.txt
 delete mode 100644 configs/rock64_defconfig
.gitlab-ci.yml +0 -1
index fa8e077a07..cbca2ef667 100644
@@ -317,7 +317,6 @@ raspberrypi4_defconfig: { extends: .defconfig }
 raspberrypi_defconfig: { extends: .defconfig }
 riotboard_defconfig: { extends: .defconfig }
 roc_pc_rk3399_defconfig: { extends: .defconfig }
-rock64_defconfig: { extends: .defconfig }
 roseapplepi_defconfig: { extends: .defconfig }
 s6lx9_microboard_defconfig: { extends: .defconfig }
 sheevaplug_defconfig: { extends: .defconfig }
DEVELOPERS +0 -2
index 88050349db..68977895e3 100644
@@ -1819,8 +1819,6 @@ F:	package/libavl/
 
 N:	Micha? ?yszczek <[email protected]>
 F:	board/altera/socrates_cyclone5/
-F:	board/pine64/rock64
-F:	configs/rock64_defconfig
 F:	configs/socrates_cyclone5_defconfig
 F:	package/netifrc/
 F:	package/openrc/
board/pine64/rock64/extlinux.conf deleted +0 -4
deleted file mode 100644
index bf71982a9f..0000000000
@@ -1,4 +0,0 @@
-label rock64-buildroot
-  kernel /boot/Image
-  devicetree /boot/rk3328-rock64.dtb
-  append console=ttyS2,1500000n8 root=/dev/mmcblk0p1 ro rootwait
board/pine64/rock64/genimage.cfg deleted +0 -23
deleted file mode 100644
index 0b5a0d8804..0000000000
@@ -1,23 +0,0 @@
-image sdcard.img {
-    hdimage {
-    }
-
-    partition uboot-spl {
-        in-partition-table = "no"
-        image = "u-boot-tpl-spl.img"
-        offset = 32768 # 512 * 0x40 from start of sd card
-    }
-
-    partition uboot {
-        in-partition-table = "no"
-        image = "u-boot.itb"
-        offset = 262144 # 512 * 0x200 from start of sd card
-    }
-
-    partition rootfs {
-        partition-type = 0x83
-        bootable = "yes"
-        image = "rootfs.ext2"
-        size = 500M
-    }
-}
board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch deleted +0 -32
deleted file mode 100644
index 2d35b78daa..0000000000
@@ -1,32 +0,0 @@
-From 211bf049084e6e374dac253138fa813682910146 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Micha=C5=82=20=C5=81yszczek?= <[email protected]>
-Date: Tue, 5 Feb 2019 22:08:54 +0100
-Subject: [PATCH] Makefile: rk3328 needs itb image to boot properly
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Micha? ?yszczek <[email protected]>
----
- Makefile | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/Makefile b/Makefile
-index 8086f3c93e..a6425b5b03 100644
---- a/Makefile
-+++ b/Makefile
-@@ -799,6 +799,11 @@ ifneq ($(BUILD_ROM),)
- ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
- endif
- 
-+# rk3328 needs itb image to boot properly
-+ifeq ($(CONFIG_ROCKCHIP_RK3328),y)
-+ALL-y += u-boot.itb
-+endif
-+
- # enable combined SPL/u-boot/dtb rules for tegra
- ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
- ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
--- 
-2.18.1
-
board/pine64/rock64/post-build.sh deleted +0 -9
deleted file mode 100755
index 26b53cba8e..0000000000
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-MKIMAGE=$HOST_DIR/bin/mkimage
-BOARD_DIR="$(dirname $0)"
-
-$MKIMAGE -n rk3328 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
-cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl.bin > $BINARIES_DIR/u-boot-tpl-spl.img
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/pine64/rock64/readme.txt deleted +0 -95
deleted file mode 100644
index 029c67641e..0000000000
@@ -1,95 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Rock64. With this default configuration you
-can log in into board via uart and look around.
-
-Board homepage: https://www.pine64.org/?page_id=7147
-
-Build
-=====
-
-First, load rock64 config for buildroot
-
-  $ make rock64_defconfig
-
-Optionally make changes to buildroot config (to install more programs)
-
-  $ make menuconfig
-
-And then build everything
-
-  $ make
-
-When completed, following files will be generated in output/images directory:
-
-  .
-  ??? Image
-  ??? bl31.bin
-  ??? bl31.elf
-  ??? rk3328-rock64.dtb
-  ??? rootfs.ext2
-  ??? rootfs.ext4 -> rootfs.ext2
-  ??? rootfs.tar
-  ??? sdcard.img
-  ??? u-boot-spl.bin
-  ??? u-boot-tpl-spl.img
-  ??? u-boot-tpl.bin
-  ??? u-boot-tpl.img
-  ??? u-boot.bin
-  ??? u-boot.itb
-
-Creating bootable SD card
-=========================
-
-!!! THIS COMMAND MAY WIPE YOUR DISK!
-!!! MAKE SURE YOU PASSED CORRECT DEVICE!
-!!! OR IT THIS WILL WIPE YOUR DISK!
-
-Simply invoke (as root)
-
-  # dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device (not partition), of= argument may also be
-/dev/mmcblk0 if you are using built-in sd card reader.
-
-Runtime
-=======
-
-Login
------
-
-By default, buildroot has no password, just type 'root' as login user, and
-you will be logged in.
-
-Serial console
---------------
-
-Serial console needs to be connected to pins (into 40pin rpi compatible part)
-
-pin 6:  gnd
-pin 8:  tx
-pin 10: rx
-
-Pin numbers are printed on board.
-
-Uart configuration is not standard. Rock64 uses 1500000 (1,5M) baudrate
-with standard 8n1.
-
-Ethernet
---------
-
-To enable ethernet you need to load modules for it:
-
-# modprobe stmmac
-# modprobe dwmac-rk
-
-and since by default there is no dhcp installed, you need to configure ip
-address, remember to change address to fit your network.
-
-# ifconfig eth0 up
-# ip addr add 10.1.1.180/24 dev eth0
-# ping 10.1.1.1
-PING 10.1.1.1 (10.1.1.1): 56 data bytes
-64 bytes from 10.1.1.1: seq=0 ttl=64 time=0.695 ms
configs/rock64_defconfig deleted +0 -38
deleted file mode 100644
index 30bf12c061..0000000000
@@ -1,38 +0,0 @@
-BR2_aarch64=y
-BR2_GLOBAL_PATCH_DIR="board/pine64/rock64/patches"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS2"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rock64/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rock64/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.19"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-rock64"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v1.4"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/ayufan-rock64/linux-u-boot.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="2017.09-rockchip-ayufan-1035-gd646df03ac"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock64-rk3328"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin tpl/u-boot-tpl.bin"
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
#2 lore raw

PATCH 1/1 configs/rock64_defconfig: remove defconfig

Quoted 2 lines · On Mon, 1 Jun 2020 15:55:42 +0200 Romain Naour <[email protected]> wrote:

Actually this issue is not related to the uboot fork but the official 2017.09 (and maybe previous releases)

So it feels like the solution is not really to remove that defconfig, correct? Because any other defconfig using 2017.09 and libpyfdt (and possibly some other nearby U-Boot versions) would also be affected, correct ?

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#3 lore raw

PATCH 1/1 configs/rock64_defconfig: remove defconfig

Hi Thomas,

Le 02/06/2020 ? 23:14, Thomas Petazzoni a ?crit?:

Quoted 10 lines
Quoted 2 lines · On Mon, 1 Jun 2020 15:55:42 +0200 Romain Naour <[email protected]> wrote:

Actually this issue is not related to the uboot fork but the official 2017.09 (and maybe previous releases)

So it feels like the solution is not really to remove that defconfig, correct? Because any other defconfig using 2017.09 and libpyfdt (and possibly some other nearby U-Boot versions) would also be affected, correct ?

Indeed, every defconfig using uboot 2017.09 with TPL support enabled will fail to build due to this issue.

I spent some time to take a look at the issue but I don't have a solution. It seems we really need commit c0e032e0090d6541549b19cc47e06ccd1f302893 to build correctly.

Best regards,
Romain

Quoted 3 lines

Thomas

#4 lore raw

PATCH 1/1 configs/rock64_defconfig: remove defconfig

In reply to Romain Naour

Romain, All,

On 2020-05-31 16:34 +0200, Romain Naour spake thusly:

Quoted 11 lines

The rock64 defconfig is currently broken [1][2] since a while due to incompatibility between uboot-2017.09-rockchip-ayufan fork and pylibfdt. Even with the latest uboot-2017.09-rockchip-ayufan fork version [3], it doesn't build.

The original submitter tried the uboot upstream rock64-rk3328_defconfig but the board doesn't boot [4].

In order to not release 2020.05 with a broken defconfig, let's remove it. It can be re-added later once the uboot issue has been resolved.

Quoted 7 lines

[1] 2020.05-rc2: https://gitlab.com/buildroot.org/buildroot/-/jobs/563613273
[2] 2020.02: https://gitlab.com/buildroot.org/buildroot/-/jobs/548596102
[3] https://github.com/ayufan-rock64/linux-u-boot/releases/tag/2017.09-rockchip-ayufan-1065-g95f6152134
[4] http://lists.busybox.net/pipermail/buildroot/2020-May/282164.html

Cc Micha? ?yszczek <[email protected]>

Even though initial discussions on that patch suggested updating the U-Boot version, that has not been done:

- updating to the rock64 fork latest commit would not fix the build,

- switching to an upstream U-Boot makes the target to fail to boot.

So: applied to master, sorry for the loooong wait! ;-)

Regards,
Yann E. MORIN.

Quoted 286 lines
---
 .gitlab-ci.yml                                |  1 -
 DEVELOPERS                                    |  2 -
 board/pine64/rock64/extlinux.conf             |  4 -
 board/pine64/rock64/genimage.cfg              | 23 -----
 ...328-needs-itb-image-to-boot-properly.patch | 32 -------
 board/pine64/rock64/post-build.sh             |  9 --
 board/pine64/rock64/readme.txt                | 95 -------------------
 configs/rock64_defconfig                      | 38 --------
 8 files changed, 204 deletions(-)
 delete mode 100644 board/pine64/rock64/extlinux.conf
 delete mode 100644 board/pine64/rock64/genimage.cfg
 delete mode 100644 board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
 delete mode 100755 board/pine64/rock64/post-build.sh
 delete mode 100644 board/pine64/rock64/readme.txt
 delete mode 100644 configs/rock64_defconfig
.gitlab-ci.yml +0 -1
index fa8e077a07..cbca2ef667 100644
@@ -317,7 +317,6 @@ raspberrypi4_defconfig: { extends: .defconfig }
 raspberrypi_defconfig: { extends: .defconfig }
 riotboard_defconfig: { extends: .defconfig }
 roc_pc_rk3399_defconfig: { extends: .defconfig }
-rock64_defconfig: { extends: .defconfig }
 roseapplepi_defconfig: { extends: .defconfig }
 s6lx9_microboard_defconfig: { extends: .defconfig }
 sheevaplug_defconfig: { extends: .defconfig }
DEVELOPERS +0 -2
index 88050349db..68977895e3 100644
@@ -1819,8 +1819,6 @@ F:	package/libavl/
 
 N:	Micha? ?yszczek <[email protected]>
 F:	board/altera/socrates_cyclone5/
-F:	board/pine64/rock64
-F:	configs/rock64_defconfig
 F:	configs/socrates_cyclone5_defconfig
 F:	package/netifrc/
 F:	package/openrc/
board/pine64/rock64/extlinux.conf deleted +0 -4
deleted file mode 100644
index bf71982a9f..0000000000
@@ -1,4 +0,0 @@
-label rock64-buildroot
-  kernel /boot/Image
-  devicetree /boot/rk3328-rock64.dtb
-  append console=ttyS2,1500000n8 root=/dev/mmcblk0p1 ro rootwait
board/pine64/rock64/genimage.cfg deleted +0 -23
deleted file mode 100644
index 0b5a0d8804..0000000000
@@ -1,23 +0,0 @@
-image sdcard.img {
-    hdimage {
-    }
-
-    partition uboot-spl {
-        in-partition-table = "no"
-        image = "u-boot-tpl-spl.img"
-        offset = 32768 # 512 * 0x40 from start of sd card
-    }
-
-    partition uboot {
-        in-partition-table = "no"
-        image = "u-boot.itb"
-        offset = 262144 # 512 * 0x200 from start of sd card
-    }
-
-    partition rootfs {
-        partition-type = 0x83
-        bootable = "yes"
-        image = "rootfs.ext2"
-        size = 500M
-    }
-}
board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch deleted +0 -32
deleted file mode 100644
index 2d35b78daa..0000000000
@@ -1,32 +0,0 @@
-From 211bf049084e6e374dac253138fa813682910146 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Micha=C5=82=20=C5=81yszczek?= <[email protected]>
-Date: Tue, 5 Feb 2019 22:08:54 +0100
-Subject: [PATCH] Makefile: rk3328 needs itb image to boot properly
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Micha? ?yszczek <[email protected]>
----
- Makefile | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/Makefile b/Makefile
-index 8086f3c93e..a6425b5b03 100644
---- a/Makefile
-+++ b/Makefile
-@@ -799,6 +799,11 @@ ifneq ($(BUILD_ROM),)
- ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
- endif
- 
-+# rk3328 needs itb image to boot properly
-+ifeq ($(CONFIG_ROCKCHIP_RK3328),y)
-+ALL-y += u-boot.itb
-+endif
-+
- # enable combined SPL/u-boot/dtb rules for tegra
- ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
- ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
--- 
-2.18.1
-
board/pine64/rock64/post-build.sh deleted +0 -9
deleted file mode 100755
index 26b53cba8e..0000000000
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-MKIMAGE=$HOST_DIR/bin/mkimage
-BOARD_DIR="$(dirname $0)"
-
-$MKIMAGE -n rk3328 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
-cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl.bin > $BINARIES_DIR/u-boot-tpl-spl.img
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/pine64/rock64/readme.txt deleted +0 -95
deleted file mode 100644
index 029c67641e..0000000000
@@ -1,95 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Rock64. With this default configuration you
-can log in into board via uart and look around.
-
-Board homepage: https://www.pine64.org/?page_id=7147
-
-Build
-=====
-
-First, load rock64 config for buildroot
-
-  $ make rock64_defconfig
-
-Optionally make changes to buildroot config (to install more programs)
-
-  $ make menuconfig
-
-And then build everything
-
-  $ make
-
-When completed, following files will be generated in output/images directory:
-
-  .
-  ??? Image
-  ??? bl31.bin
-  ??? bl31.elf
-  ??? rk3328-rock64.dtb
-  ??? rootfs.ext2
-  ??? rootfs.ext4 -> rootfs.ext2
-  ??? rootfs.tar
-  ??? sdcard.img
-  ??? u-boot-spl.bin
-  ??? u-boot-tpl-spl.img
-  ??? u-boot-tpl.bin
-  ??? u-boot-tpl.img
-  ??? u-boot.bin
-  ??? u-boot.itb
-
-Creating bootable SD card
-=========================
-
-!!! THIS COMMAND MAY WIPE YOUR DISK!
-!!! MAKE SURE YOU PASSED CORRECT DEVICE!
-!!! OR IT THIS WILL WIPE YOUR DISK!
-
-Simply invoke (as root)
-
-  # dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device (not partition), of= argument may also be
-/dev/mmcblk0 if you are using built-in sd card reader.
-
-Runtime
-=======
-
-Login
------
-
-By default, buildroot has no password, just type 'root' as login user, and
-you will be logged in.
-
-Serial console
---------------
-
-Serial console needs to be connected to pins (into 40pin rpi compatible part)
-
-pin 6:  gnd
-pin 8:  tx
-pin 10: rx
-
-Pin numbers are printed on board.
-
-Uart configuration is not standard. Rock64 uses 1500000 (1,5M) baudrate
-with standard 8n1.
-
-Ethernet
---------
-
-To enable ethernet you need to load modules for it:
-
-# modprobe stmmac
-# modprobe dwmac-rk
-
-and since by default there is no dhcp installed, you need to configure ip
-address, remember to change address to fit your network.
-
-# ifconfig eth0 up
-# ip addr add 10.1.1.180/24 dev eth0
-# ping 10.1.1.1
-PING 10.1.1.1 (10.1.1.1): 56 data bytes
-64 bytes from 10.1.1.1: seq=0 ttl=64 time=0.695 ms
configs/rock64_defconfig deleted +0 -38
deleted file mode 100644
index 30bf12c061..0000000000
@@ -1,38 +0,0 @@
-BR2_aarch64=y
-BR2_GLOBAL_PATCH_DIR="board/pine64/rock64/patches"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS2"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rock64/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rock64/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.19"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-rock64"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v1.4"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/ayufan-rock64/linux-u-boot.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="2017.09-rockchip-ayufan-1035-gd646df03ac"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock64-rk3328"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin tpl/u-boot-tpl.bin"
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Signature · 6 lines
2.25.4

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'