Skip to contentSkip to conversation

brcmfmac: Stability change series

PATCH In review Wright Feng 2 participants 7 messages Jun 4, 2020 – Jul 14, 2020 Broadcom BRCM80211 IEEE802.11 wireless drivers

lore
Share & tools
lore
#0 lore raw

v2 cover brcmfmac: Stability change series

This series fixes stability and connection related failures.

Changes in v2:
- Correct all typos in commit message

Prasanna Kerekoppa (1):
brcmfmac: To fix Bss Info flag definition Bug

Raveendran Somu (1):
brcmfmac: To fix kernel crash on out of boundary access

Wright Feng (3):
brcmfmac: fix invalid permanent MAC address in wiphy
brcmfmac: keep SDIO watchdog running when console_interval is non-zero
brcmfmac: reduce maximum station interface from 2 to 1 in RSDB mode

 .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c   | 8 ++++----
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +-
 .../net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h | 2 +-
 .../net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c   | 3 +++
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c   | 6 +++++-
 5 files changed, 14 insertions(+), 7 deletions(-)
Signature · 1 line
2.25.0
#1 lore raw

PATCH v2 1/5 brcmfmac: To fix kernel crash on out of boundary access

From: Raveendran Somu <[email protected]>

To truncate the additional bytes, if extra bytes have been received. Current code only have a warning and proceed without handling it. But in one of the crash reported by DVT, these causes the crash intermittently. So the processing is limit to the skb->len.

---
v2:
- Correct all typos in commit message

 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c +3 -0
index 09701262330d..531fe9be4025 100644
@@ -1843,6 +1843,9 @@ void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb)
 
 	WARN_ON(siglen > skb->len);
 
+	if (siglen > skb->len)
+		siglen = skb->len;
+
 	if (!siglen)
 		return;
 	/* if flow control disabled, skip to packet data and leave */
Signature · 1 line
2.25.0
#2 lore raw

Re: [PATCH v2 1/5] brcmfmac: To fix kernel crash on out of boundary access

Quoted 10 lines · Wright Feng

From: Raveendran Somu <[email protected]>

To truncate the additional bytes, if extra bytes have been received. Current code only have a warning and proceed without handling it. But in one of the crash reported by DVT, these causes the crash intermittently. So the processing is limit to the skb->len.

5 patches applied to wireless-drivers-next.git, thanks.

698bae2e6ea1 brcmfmac: To fix kernel crash on out of boundary access 1eb4e9f62998 brcmfmac: fix invalid permanent MAC address in wiphy eccbf46b15bb brcmfmac: keep SDIO watchdog running when console_interval is non-zero ec3428bb8915 brcmfmac: reduce maximum station interface from 2 to 1 in RSDB mode fa3266541b13 brcmfmac: To fix Bss Info flag definition Bug

Signature · 3 lines
https://patchwork.kernel.org/patch/11587075/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
#3 lore raw

PATCH v2 2/5 brcmfmac: fix invalid permanent MAC address in wiphy

In reply to Wright Feng

When host driver retrieves mac addresses from dongle, driver copies memory from drvr->mac to perm_addr. But at the moment, drvr->mac is all zero array which causes permanent MAC address in wiphy is all zero as well. To fix this, we set drvr->mac before setting perm_addr.

---
v2:
- Correct the typo in commit subject

 drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +1 -1
index dec25e415619..e3758bd86acf 100644
@@ -209,8 +209,8 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 		bphy_err(drvr, "Retrieving cur_etheraddr failed, %d\n", err);
 		goto done;
 	}
-	memcpy(ifp->drvr->wiphy->perm_addr, ifp->drvr->mac, ETH_ALEN);
 	memcpy(ifp->drvr->mac, ifp->mac_addr, sizeof(ifp->drvr->mac));
+	memcpy(ifp->drvr->wiphy->perm_addr, ifp->drvr->mac, ETH_ALEN);
 
 	bus = ifp->drvr->bus_if;
 	ri = &ifp->drvr->revinfo;
Signature · 1 line
2.25.0
#4 lore raw

PATCH v2 3/5 brcmfmac: keep SDIO watchdog running when console_interval is non-zero

In reply to Wright Feng

brcmfmac host driver makes SDIO bus sleep and stops SDIO watchdog if no pending event or data. As a result, host driver does not poll firmware console buffer before buffer overflow, which leads to missing firmware logs. We should not stop SDIO watchdog if console_interval is non-zero in debug build.

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +5 -1
index ce6f15284277..50444989ae09 100644
@@ -3686,7 +3686,11 @@ static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 			if (bus->idlecount > bus->idletime) {
 				brcmf_dbg(SDIO, "idle\n");
 				sdio_claim_host(bus->sdiodev->func1);
-				brcmf_sdio_wd_timer(bus, false);
+#ifdef DEBUG
+				if (!BRCMF_FWCON_ON() ||
+				    bus->console_interval == 0)
+#endif
+					brcmf_sdio_wd_timer(bus, false);
 				bus->idlecount = 0;
 				brcmf_sdio_bus_sleep(bus, true, false);
 				sdio_release_host(bus->sdiodev->func1);
Signature · 1 line
2.25.0
#5 lore raw

PATCH v2 4/5 brcmfmac: reduce maximum station interface from 2 to 1 in RSDB mode

In reply to Wright Feng

The firmware state machines are not fully suitable for concurrent station interface support, it may hit unexpected error if we have 2 different SSIDs and the roaming scenarios concurrently. To avoid the bad user-experience if this is not fully validated, we dis-allow user to create two concurrent station interfaces.

---
 .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c   | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +4 -4
index a757abd7a599..8c1801fb59e7 100644
@@ -6801,7 +6801,7 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = {
  *	#AP <= 4, matching BI, channels = 1, 4 total
  *
  * no p2p and rsdb:
- *	#STA <= 2, #AP <= 2, channels = 2, 4 total
+ *	#STA <= 1, #AP <= 2, channels = 2, 4 total
  *
  * p2p, no mchan, and mbss:
  *
@@ -6816,7 +6816,7 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = {
  *	#AP <= 4, matching BI, channels = 1, 4 total
  *
  * p2p, rsdb, and no mbss:
- *	#STA <= 2, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 2, AP <= 2,
+ *	#STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 2, AP <= 2,
  *	 channels = 2, 4 total
  */
 static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
@@ -6857,7 +6857,7 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 		goto err;
 
 	combo[c].num_different_channels = 1 + (rsdb || (p2p && mchan));
-	c0_limits[i].max = 1 + rsdb;
+	c0_limits[i].max = 1;
 	c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
 	if (mon_flag) {
 		c0_limits[i].max = 1;
@@ -6873,7 +6873,7 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
 	if (p2p && rsdb) {
 		c0_limits[i].max = 2;
 		c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
-		combo[c].max_interfaces = 5;
+		combo[c].max_interfaces = 4;
 	} else if (p2p) {
 		combo[c].max_interfaces = i;
 	} else if (rsdb) {
Signature · 1 line
2.25.0
#6 lore raw

PATCH v2 5/5 brcmfmac: To fix Bss Info flag definition Bug

In reply to Wright Feng

From: Prasanna Kerekoppa <[email protected]>

Bss info flag definition need to be fixed from 0x2 to 0x4 This flag is for rssi info received on channel.
All Firmware branches defined as 0x4 and this is bug in brcmfmac.

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h +1 -1
index de0ef1b545c4..2e31cc10c195 100644
@@ -19,7 +19,7 @@
 #define BRCMF_ARP_OL_PEER_AUTO_REPLY	0x00000008
 
 #define	BRCMF_BSS_INFO_VERSION	109 /* curr ver of brcmf_bss_info_le struct */
-#define BRCMF_BSS_RSSI_ON_CHANNEL	0x0002
+#define BRCMF_BSS_RSSI_ON_CHANNEL	0x0004
 
 #define BRCMF_STA_BRCM			0x00000001	/* Running a Broadcom driver */
 #define BRCMF_STA_WME			0x00000002	/* WMM association */
Signature · 1 line
2.25.0