fstests: modify user name beginning with non-digit
PATCH v2 1/1 fstests: modify user name beginning with non-digit
openSUSE and SLE don't support username begin with digit, so it will skip test generic/597 and generic/598 by lack of 123456-fsgqa user. generic/597 and 598 are not test username begin with digit on purpose (different with generic/381). It's will be helpful to use an username begin with non-digit in this case.
--- README | 1 + tests/generic/597 | 7 ++----- tests/generic/598 | 7 ++----- 3 files changed, 5 insertions(+), 10 deletions(-)
README +1 -0
@@ -22,6 +22,7 @@ _______________________ - create fsgqa test user ("sudo useradd -m fsgqa") - create fsgqa group ("sudo groupadd fsgqa") - create 123456-fsgqa test user ("sudo useradd 123456-fsgqa") +- create fsgqa-123456 test user ("sudo useradd fsgqa-123456") ______________________ USING THE FSQA SUITE
tests/generic/597 +2 -5
@@ -41,13 +41,10 @@ _supported_os Linux _require_test _require_sysctl_variable fs.protected_symlinks _require_sysctl_variable fs.protected_hardlinks -# su in _require_user prints warnings about user name starts with a digit, -# discard the warning -_require_user 123456-fsgqa >/dev/null 2>&1 -# Do this SECOND so that qa_user is fsgqa, and _user_do uses that account +_require_user fsgqa-123456 _require_user fsgqa -OWNER=123456-fsgqa +OWNER=fsgqa-123456 OTHER=fsgqa # Save current system state to reset when done
tests/generic/598 +2 -5
@@ -41,13 +41,10 @@ _supported_os Linux _require_test _require_sysctl_variable fs.protected_regular _require_sysctl_variable fs.protected_fifos -# su in _require_user prints warnings about user name starts with a digit, -# discard the warning -_require_user 123456-fsgqa >/dev/null 2>&1 -# Do this SECOND so that qa_user is fsgqa, and _user_do uses that account +_require_user fsgqa-123456 _require_user fsgqa -USER1=123456-fsgqa +USER1=fsgqa-123456 USER2=fsgqa # Save current system state to reset when done
Signature · 1 line
2.26.2
Quoted 30 lines · Yong Sun
openSUSE and SLE don't support username begin with digit, so it will skip test generic/597 and generic/598 by lack of 123456-fsgqa user. generic/597 and 598 are not test username begin with digit on purpose (different with generic/381). It's will be helpful to use an username begin with non-digit in this case.
Signed-off-by Sun Yong <[email protected]>--- README | 1 + tests/generic/597 | 7 ++----- tests/generic/598 | 7 ++----- 3 files changed, 5 insertions(+), 10 deletions(-)README +1
-0@@ -22,6 +22,7 @@ _______________________ - create fsgqa test user ("sudo useradd -m fsgqa") - create fsgqa group ("sudo groupadd fsgqa") - create 123456-fsgqa test user ("sudo useradd 123456-fsgqa") +- create fsgqa-123456 test user ("sudo useradd fsgqa-123456") ______________________ USING THE FSQA SUITEtests/generic/597 +0
-0
tests/generic/597 _supported_os Linux · line 47
Quoted 7 lines
tests/generic/597 +0
-4@@ -41,13 +41,10 @@ _supported_os Linux _require_test _require_sysctl_variable fs.protected_symlinks _require_sysctl_variable fs.protected_hardlinks -# su in _require_user prints warnings about user name starts with a digit, -# discard the warning -_require_user 123456-fsgqa >/dev/null 2>&1 -# Do this SECOND so that qa_user is fsgqa, and _user_do uses that account
This comment is still relevant. It's a quirk that _user_do uses the second _require_user stated[1], and I wanted to highlight that in the comment.
Otherwise, TBH I guess I'd rather see the user simply be "fsgqa2" or something, so it's not easily confused with the 123456-fsgqa user. Not a technical problem with this patch though, just a preference.
Alternately, these two tests /might/ be able to run just as well with "root" as one user or the other, but I didn't want to risk accidentally getting the permissions tests wrong by using a user with elevated privs.... so I'm not sure about that option.
-Eric
[1]
# check for a user on the machine, fsgqa as default
#
_require_user()
{
qa_user=fsgqa
if [ -n "$1" ];then
qa_user=$1
fi...
_user_do()
{
echo $1 | su -s /bin/bash $qa_user 2>&1 | _filter_user_do
}tho it might be better to enhance _user_do to take a username as an optional (or required) argument, to avoid this complexity/confusion.... that's a different patch tho.
Quoted 6 lines
tests/generic/597 +2
-1+_require_user fsgqa-123456 _require_user fsgqa -OWNER=123456-fsgqa +OWNER=fsgqa-123456 OTHER=fsgqa
Quoted 34 lines · Eric Sandeen <[email protected]> 于2020年6月4日周四 下午9:56写道:
Quoted 32 lines · Yong Sun
openSUSE and SLE don't support username begin with digit, so it will skip test generic/597 and generic/598 by lack of 123456-fsgqa user. generic/597 and 598 are not test username begin with digit on purpose (different with generic/381). It's will be helpful to use an username begin with non-digit in this case.
Signed-off-by Sun Yong <[email protected]>--- README | 1 + tests/generic/597 | 7 ++----- tests/generic/598 | 7 ++----- 3 files changed, 5 insertions(+), 10 deletions(-)README +1
-0@@ -22,6 +22,7 @@ _______________________ - create fsgqa test user ("sudo useradd -m fsgqa") - create fsgqa group ("sudo groupadd fsgqa") - create 123456-fsgqa test user ("sudo useradd 123456-fsgqa") +- create fsgqa-123456 test user ("sudo useradd fsgqa-123456") ______________________ USING THE FSQA SUITEtests/generic/597 +0
-0@@ -41,13 +41,10 @@ _supported_os Linux _require_test _require_sysctl_variable fs.protected_symlinks
Quoted 9 lines
tests/generic/597 _supported_os Linux · line 47
Quoted 5 lines
tests/generic/597 +0
-4_require_sysctl_variable fs.protected_hardlinks -# su in _require_user prints warnings about user name starts with a digit, -# discard the warning -_require_user 123456-fsgqa >/dev/null 2>&1 -# Do this SECOND so that qa_user is fsgqa, and _user_do uses that accountThis comment is still relevant. It's a quirk that
_user_douses the second_require_userstated[1], and I wanted to highlight that in the comment.
I see, I'll left this comments in v3.
Quoted 9 lines
Otherwise, TBH I guess I'd rather see the user simply be "fsgqa2" or something, so it's not easily confused with the 123456-fsgqa user. Not a technical problem with this patch though, just a preference.
Alternately, these two tests /might/ be able to run just as well with "root" as one user or the other, but I didn't want to risk accidentally getting the permissions tests wrong by using a user with elevated privs.... so I'm not sure about that option.
IMO fsgqa2 is better than root. root may misleading test motivation. Also It's will be
more convenience to choose when people need a second user in other tests.
Quoted 14 lines
-Eric
[1]
# check for a user on the machine, fsgqa as default # _require_user() { qa_user=fsgqa if [ -n "$1" ];then qa_user=$1 fi...
Quoted 8 lines
_user_do(){ echo $1 | su -s /bin/bash $qa_user 2>&1 | _filter_user_do }tho it might be better to enhance
_user_doto take a username as an optional (or required) argument, to avoid this complexity/confusion.... that's a different patch tho.
+1, this may need a different patch.
Thanks,
Sero
Quoted 7 lines
Quoted 7 lines
tests/generic/597 +2
-1+_require_user fsgqa-123456 _require_user fsgqa -OWNER=123456-fsgqa +OWNER=fsgqa-123456 OTHER=fsgqa