rtc: pcf2127: watchdog: handle nowayout feature
Subsystems (2)
PATCH 1/1 rtc: pcf2127: watchdog: handle nowayout feature
Driver does not use module parameter for nowayout, so it need to statically initialize status variable of the watchdog_device based on CONFIG_WATCHDOG_NOWAYOUT.
Signed-off-by Bruno Thomsen <[email protected]>
--- drivers/rtc/rtc-pcf2127.c | 1 + 1 file changed, 1 insertion(+)
drivers/rtc/rtc-pcf2127.c +1 -0
@@ -441,6 +441,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, pcf2127->wdd.max_timeout =PCF2127_WD_VAL_MAX ; pcf2127->wdd.timeout =PCF2127_WD_VAL_DEFAULT ; pcf2127->wdd.min_hw_heartbeat_ms =500 ; + pcf2127->wdd.status =WATCHDOG_NOWAYOUT_INIT_STATUS ;watchdog_set_drvdata (&pcf2127->wdd, pcf2127);
Signature · 1 line
2.26.2
Quoted 5 lines · Bruno Thomsen
Driver does not use module parameter for nowayout, so it need to statically initialize status variable of the
watchdog_devicebased onCONFIG_WATCHDOG_NOWAYOUT.Signed-off-by Bruno Thomsen <[email protected]>
Acked-by Guenter Roeck <[email protected]>
Quoted 19 lines
--- drivers/rtc/rtc-pcf2127.c | 1 + 1 file changed, 1 insertion(+)drivers/rtc/rtc-pcf2127.c +1
-0@@ -441,6 +441,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, pcf2127->wdd.max_timeout =PCF2127_WD_VAL_MAX ; pcf2127->wdd.timeout =PCF2127_WD_VAL_DEFAULT ; pcf2127->wdd.min_hw_heartbeat_ms =500 ; + pcf2127->wdd.status =WATCHDOG_NOWAYOUT_INIT_STATUS ;watchdog_set_drvdata (&pcf2127->wdd, pcf2127);Signature · 1 line
2.26.2
Quoted 3 lines · Bruno Thomsen
Driver does not use module parameter for nowayout, so it need to statically initialize status variable of the
watchdog_devicebased onCONFIG_WATCHDOG_NOWAYOUT.
Applied, thanks!
[1/1] rtc: pcf2127: watchdog: handle nowayout feature
commit: 4601e24a6fb819d38d1156d0f690cbe6a42c6d76
Best regards,
Signature · 1 line
Alexandre Belloni <[email protected]>