Skip to contentSkip to conversation

{linux, linux-headers}: add version 5.7

PATCH Superseded Michael Walle 2 participants 4 messages Jun 1, 2020 – Jun 4, 2020

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/3 {linux, linux-headers}: add version 5.7

---
This is a prerequisite for the sl28 board support which needs at least kernel 5.7, thus pack it into one series. This is a new patch and thus, there is no former version. This patch can also be picked early, before the other two patches.

Changes since v3:
new patch

 linux/Config.in                                     |  4 ++--
 linux/linux.hash                                    |  1 +
 package/linux-headers/Config.in.host                | 13 +++++++++++--
 toolchain/Config.in                                 |  5 +++++
 .../toolchain-external-custom/Config.in.options     |  6 +++++-
 5 files changed, 24 insertions(+), 5 deletions(-)
linux/Config.in +2 -2
index d7373ab25a..e335931575 100644
@@ -27,7 +27,7 @@ choice
 	prompt "Kernel version"
 
 config BR2_LINUX_KERNEL_LATEST_VERSION
-	bool "Latest version (5.6)"
+	bool "Latest version (5.7)"
 
 config BR2_LINUX_KERNEL_LATEST_CIP_VERSION
 	bool "Latest CIP SLTS version (4.19.98-cip19)"
@@ -128,7 +128,7 @@ endif
 
 config BR2_LINUX_KERNEL_VERSION
 	string
-	default "5.6.7" if BR2_LINUX_KERNEL_LATEST_VERSION
+	default "5.7" if BR2_LINUX_KERNEL_LATEST_VERSION
 	default "4.19.98-cip19" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION
 	default "4.19.98-cip19-rt7" if BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION
 	default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \
linux/linux.hash +1 -0
index 0449be680d..c9fb7edb4f 100644
@@ -1,4 +1,5 @@
 # From https://www.kernel.org/pub/linux/kernel/v5.x/sha256sums.asc
+sha256  de8163bb62f822d84f7a3983574ec460060bf013a78ff79cd7c979ff1ec1d7e0  linux-5.7.tar.xz
 sha256  23a0420f29eacb66d71f86f64fbd35a1b6ff617d520e3e05f3e1f537d46692ca  linux-5.6.7.tar.xz
 sha256  1448334371fb52f511255726832464d33877a210a7350260fb18eb225ae211eb  linux-5.5.19.tar.xz
 sha256  e16bd5f7284a80a41328bf712e1136b0adf5b71cc0bd263efa7cac75539806d4  linux-5.4.35.tar.xz
package/linux-headers/Config.in.host +11 -2
index c6ba8469fd..8e3663481f 100644
@@ -6,7 +6,7 @@ config BR2_PACKAGE_HOST_LINUX_HEADERS
 choice
 	prompt "Kernel Headers"
 	default BR2_KERNEL_HEADERS_AS_KERNEL if BR2_LINUX_KERNEL
-	default BR2_KERNEL_HEADERS_5_6
+	default BR2_KERNEL_HEADERS_5_7
 	help
 	  Select the kernel version to get headers from.
 
@@ -63,6 +63,10 @@ config BR2_KERNEL_HEADERS_5_6
 	bool "Linux 5.6.x kernel headers"
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_6
 
+config BR2_KERNEL_HEADERS_5_7
+	bool "Linux 5.7.x kernel headers"
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_7
+
 config BR2_KERNEL_HEADERS_VERSION
 	bool "Manually specified Linux version"
 	help
@@ -135,8 +139,12 @@ choice
 	  If your kernel headers are more recent than the latest version
 	  in the choice, then select the latest version.
 
+config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_7
+	bool "5.7.x or later"
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_7
+
 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_6
-	bool "5.6.x or later"
+	bool "5.6.x"
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_6
 
 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_5
@@ -341,6 +349,7 @@ config BR2_DEFAULT_KERNEL_HEADERS
 	default "5.4.35"	if BR2_KERNEL_HEADERS_5_4
 	default "5.5.19"	if BR2_KERNEL_HEADERS_5_5
 	default "5.6.7"		if BR2_KERNEL_HEADERS_5_6
+	default "5.7"		if BR2_KERNEL_HEADERS_5_7
 	default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION
 	default "custom"	if BR2_KERNEL_HEADERS_CUSTOM_TARBALL
 	default BR2_KERNEL_HEADERS_CUSTOM_REPO_VERSION \
toolchain/Config.in +5 -0
index b6bcde4a95..6865199ffc 100644
@@ -476,6 +476,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_5
 config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_6
 	bool
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_5
+
+config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_7
+	bool
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_6
 	select BR2_TOOLCHAIN_HEADERS_LATEST
 
 # This should be selected by the latest version, above, to indicate that
@@ -489,6 +493,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST
 # stops affecting a value on the first matching default.
 config BR2_TOOLCHAIN_HEADERS_AT_LEAST
 	string
+	default "5.7"  if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_7
 	default "5.6"  if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_6
 	default "5.5"  if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_5
 	default "5.4"  if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4
toolchain/toolchain-external/toolchain-external-custom/Config.in.options +5 -1
index 9a8078d314..a4430f7169 100644
@@ -115,8 +115,12 @@ choice
 	  If your toolchain uses headers newer than the latest version
 	  in the choice, then select the latest version.
 
+config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_7
+	bool "5.7.x or later"
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_7
+
 config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_6
-	bool "5.6.x or later"
+	bool "5.6.x"
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_6
 
 config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_5
Signature · 1 line
2.20.1
#1 lore raw

PATCH v4 2/3 linux: introduce BR2_KERNEL_DTB_KEEP_DIRNAME

In linux, newer architectures like ARM64 and RISC-V keep their device tree sources organized by subdirectories. When these device trees are installed by the kernel they will keep the directory names. But buildroot strips the prefixes when installing them into /boot or the images directory.
Sometimes the bootloader references the device tree by name (e.g. u-boot has the environment variable 'fdtfile') which also includes the prefix directory.
Make it possible to keep this prefix during installation, so we can be compatible with other distributions and make it easier for the user, because he doesn't have to change that environment variable.

---
Hi,

formerly, this was a seperate patch. But because the sl28 board also needs another patch now, I combined all of them into one patch series. So actually, there is no v2, nor a v3 of this patch.

Changes since v3:
none

Changes since v2:
none

 linux/Config.in |  7 +++++++
 linux/linux.mk  | 10 ++++++----
 2 files changed, 13 insertions(+), 4 deletions(-)
linux/Config.in +7 -0
index e335931575..814e6ceded 100644
@@ -407,6 +407,13 @@ config BR2_LINUX_KERNEL_CUSTOM_DTS_PATH
 	  You can provide a list of dts paths to copy and
 	  build, separated by spaces.
 
+config BR2_KERNEL_DTB_KEEP_DIRNAME
+	bool "Keep the directory name of the Device Tree"
+	help
+	  If enabled, the device tree blobs keep their
+	  directory prefixes when they get copied to the
+	  output image directory or the target directory.
+
 config BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT
 	bool "Build Device Tree with overlay support"
 	help
linux/linux.mk +6 -4
index 60dc343efa..c6ad9e432e 100644
@@ -377,10 +377,12 @@ endef
 ifeq ($(BR2_LINUX_KERNEL_APPENDED_DTB),)
 define LINUX_INSTALL_DTB
 	# dtbs moved from arch/<ARCH>/boot to arch/<ARCH>/boot/dts since 3.8-rc1
-	cp $(addprefix \
-		$(LINUX_ARCH_PATH)/boot/$(if $(wildcard \
-		$(addprefix $(LINUX_ARCH_PATH)/boot/dts/,$(LINUX_DTBS))),dts/),$(LINUX_DTBS)) \
-		$(1)
+	$(foreach dtb,$(LINUX_DTBS), \
+		install -D $(addprefix \
+			$(LINUX_ARCH_PATH)/boot/$(if $(wildcard \
+			$(addprefix $(LINUX_ARCH_PATH)/boot/dts/,$(dtb))),dts/),$(dtb)) \
+			$(1)/$(if $(BR2_KERNEL_DTB_KEEP_DIRNAME),$(dtb),$(notdir $(dtb)))
+	)
 endef
 endif # BR2_LINUX_KERNEL_APPENDED_DTB
 endif # BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT
Signature · 1 line
2.20.1
#2 lore raw

PATCH v4 2/3 linux: introduce BR2_KERNEL_DTB_KEEP_DIRNAME

Michael, All,

On 2020-06-01 17:17 +0200, Michael Walle spake thusly:

Quoted 55 lines

In linux, newer architectures like ARM64 and RISC-V keep their device tree sources organized by subdirectories. When these device trees are installed by the kernel they will keep the directory names. But buildroot strips the prefixes when installing them into /boot or the images directory.
Sometimes the bootloader references the device tree by name (e.g. u-boot has the environment variable 'fdtfile') which also includes the prefix directory.
Make it possible to keep this prefix during installation, so we can be compatible with other distributions and make it easier for the user, because he doesn't have to change that environment variable.

---
Hi,

formerly, this was a seperate patch. But because the sl28 board also needs another patch now, I combined all of them into one patch series. So actually, there is no v2, nor a v3 of this patch.

Changes since v3:
none

Changes since v2:
none

 linux/Config.in |  7 +++++++
 linux/linux.mk  | 10 ++++++----
 2 files changed, 13 insertions(+), 4 deletions(-)
linux/Config.in +7 -0
index e335931575..814e6ceded 100644
@@ -407,6 +407,13 @@ config BR2_LINUX_KERNEL_CUSTOM_DTS_PATH
 	  You can provide a list of dts paths to copy and
 	  build, separated by spaces.
 
+config BR2_KERNEL_DTB_KEEP_DIRNAME
+	bool "Keep the directory name of the Device Tree"
+	help
+	  If enabled, the device tree blobs keep their
+	  directory prefixes when they get copied to the
+	  output image directory or the target directory.
+
 config BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT
 	bool "Build Device Tree with overlay support"
 	help
linux/linux.mk +0 -0
index 60dc343efa..c6ad9e432e 100644
@@ -377,10 +377,12 @@ endef
 ifeq ($(BR2_LINUX_KERNEL_APPENDED_DTB),)
 define LINUX_INSTALL_DTB

linux/linux.mk endef · line 384

Quoted 10 lines
linux/linux.mk +5 -4
 	# dtbs moved from arch/<ARCH>/boot to arch/<ARCH>/boot/dts since 3.8-rc1
-	cp $(addprefix \
-		$(LINUX_ARCH_PATH)/boot/$(if $(wildcard \
-		$(addprefix $(LINUX_ARCH_PATH)/boot/dts/,$(LINUX_DTBS))),dts/),$(LINUX_DTBS)) \
-		$(1)
+	$(foreach dtb,$(LINUX_DTBS), \
+		install -D $(addprefix \
+			$(LINUX_ARCH_PATH)/boot/$(if $(wildcard \
+			$(addprefix $(LINUX_ARCH_PATH)/boot/dts/,$(dtb))),dts/),$(dtb)) \
+			$(1)/$(if $(BR2_KERNEL_DTB_KEEP_DIRNAME),$(dtb),$(notdir $(dtb)))

This code is rather difficult to read... :-(

However, I think there is a simplification: now that you iterate over the DTBs, you don't need this anymore:

    $(addprefix $(LINUX_ARCH_PATH)/boot/dts/,$(dtb))

is just equivalent to:

    $(LINUX_ARCH_PATH)/boot/dts/$(dtb)

Also, the block is not nicely indented to show the imbrication of calls and such.

Finally, the superfluous wildcard and test on it can be simplified by using an $(or....) construct:

    install -D \
            $(or $(wildcard $(LINUX_ARCH_PATH)/boot/dts/$(dtb)),$(LINUX_ARCH_PATH)/boot/$(dtb)) \
            $(1)/$(if $(BR2_KERNEL_DTB_KEEP_DIRNAME),$(dtb),$(notdir $(dtb)))

CAre to test this, please?

Regards,
Yann E. MORIN.

Quoted 6 lines
linux/linux.mk +0 -0
 endef
 endif # BR2_LINUX_KERNEL_APPENDED_DTB
 endif # BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT
Signature · 1 line
2.20.1
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#3 lore raw

PATCH v4 3/3 board: Add Kontron SMARC-sAL28 support

In reply to Michael Walle

Now that upstream supports this board add buildroot support for it, too.

This supports:
- latest upstream linux kernel. Since the support for this board and its SoC is still in active development, we want to follow the upstream kernel releases for now.
- building an image which can be installed to eMMC, SD card or USB thumb drive.
- upstream u-boot patches are pending, therefore no support for building a bootloader for now.

---
Changes since v3:
- removed custom kernel version, instead use the latest 5.7 kernel

Changes since v2:
- added udev rules 71-smarc-networking.rules, to rename the network interfaces according to the SMARC specification.
- removed arm-smmu.disable_bypass=n kernel paramter, since the real fix is now upstream and will be included in 5.7
- use full path in PARTUUID="$($HOST_DIR/bin/uuidgen)" to be sure we are using our own uuidgen
- mention fdtfile in readme.txt
- fixed typo in readme.txt
- mention non-working network with vendor's bootloader in readme.txt
- set BR2_KERNEL_DTB_KEEP_DIRNAME=y

Changes since v1:
- added readme.txt
- changed from u-boot boot script to extlinux.conf booting
- enable eudev and added udev rules to properly name network interfaces
- removed CONFIG_FSL_ENETC_HW_TIMESTAMPING=y
- added CONFIG_NET_SCH_CBS, CONFIG_NET_SCH_ETF, CONFIG_NET_SCH_TAPRIO, CONFIG_FSL_ENETC_QOS and iproute2, as this it the main feature of this board
- added var2 device tree
- generate PARTUUID in post-build.sh to be able to use the resulting image on any block device which the board supports for booting
- (keep post-build.sh for consistency reasons)

 DEVELOPERS                                    |  2 +
 board/kontron/smarc-sal28/extlinux.conf       |  4 +
 board/kontron/smarc-sal28/genimage.cfg        | 11 +++
 board/kontron/smarc-sal28/linux.fragment      | 18 +++++
 board/kontron/smarc-sal28/post-build.sh       |  7 ++
 board/kontron/smarc-sal28/readme.txt          | 80 +++++++++++++++++++
 .../udev/rules.d/70-enetc-networking.rules    |  8 ++
 .../udev/rules.d/70-felix-networking.rules    |  6 ++
 .../udev/rules.d/71-smarc-networking.rules    | 19 +++++
 configs/kontron_smarc_sal28_defconfig         | 22 +++++
 10 files changed, 177 insertions(+)
 create mode 100644 board/kontron/smarc-sal28/extlinux.conf
 create mode 100644 board/kontron/smarc-sal28/genimage.cfg
 create mode 100644 board/kontron/smarc-sal28/linux.fragment
 create mode 100755 board/kontron/smarc-sal28/post-build.sh
 create mode 100644 board/kontron/smarc-sal28/readme.txt
 create mode 100644 board/kontron/smarc-sal28/rootfs_overlay/etc/udev/rules.d/70-enetc-networking.rules
 create mode 100644 board/kontron/smarc-sal28/rootfs_overlay/etc/udev/rules.d/70-felix-networking.rules
 create mode 100644 board/kontron/smarc-sal28/rootfs_overlay/etc/udev/rules.d/71-smarc-networking.rules
 create mode 100644 configs/kontron_smarc_sal28_defconfig
DEVELOPERS +2 -0
index 04811b6288..15b0cbdc0c 100644
@@ -1837,6 +1837,8 @@ F:	package/jasper/
 F:	package/libstrophe/
 
 N:	Michael Walle <[email protected]>
+F:	board/kontron/smarc-sal28/
+F:	configs/kontron_smarc_sal28_defconfig
 F:	package/libavl/
 
 N:	Micha? ?yszczek <[email protected]>
board/kontron/smarc-sal28/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..bf60bc3798
@@ -0,0 +1,4 @@
+label buildroot
+  kernel /boot/Image
+  devicetreedir /boot
+  append root=PARTUUID=%PARTUUID% rootwait
board/kontron/smarc-sal28/genimage.cfg new file +11 -0
new file mode 100644
index 0000000000..9ef37de757
@@ -0,0 +1,11 @@
+image sdcard-emmc.img {
+	hdimage {
+		gpt = true
+	}
+
+	partition rootfs {
+		offset = 2M
+		image = rootfs.ext4
+		partition-uuid = %PARTUUID%
+	}
+}
board/kontron/smarc-sal28/linux.fragment new file +18 -0
new file mode 100644
index 0000000000..00bbcc0923
@@ -0,0 +1,18 @@
+CONFIG_NET_DSA=m
+CONFIG_NET_DSA_TAG_OCELOT=m
+CONFIG_NET_DSA_MSCC_FELIX=m
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBS=m
+CONFIG_NET_SCH_ETF=m
+CONFIG_NET_SCH_TAPRIO=m
+CONFIG_CAN_FLEXCAN=m
+CONFIG_FSL_ENETC=y
+CONFIG_FSL_ENETC_VF=m
+CONFIG_FSL_ENETC_QOS=y
+CONFIG_MSCC_OCELOT_SWITCH=m
+CONFIG_PCIE_DW_PLAT_HOST=y
+CONFIG_GPIO_MPC8XXX=y
+CONFIG_SND_SOC_FSL_SAI=m
+CONFIG_SND_SOC_WM8904=m
+CONFIG_RTC_DRV_RV8803=y
+CONFIG_COMMON_CLK_FSL_SAI=y
board/kontron/smarc-sal28/post-build.sh new file +7 -0
new file mode 100755
index 0000000000..bf8861f6a9
@@ -0,0 +1,7 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+PARTUUID="$($HOST_DIR/bin/uuidgen)"
+
+install -d "$TARGET_DIR/boot/extlinux/"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"
board/kontron/smarc-sal28/readme.txt new file +80 -0

80 lines not on this page · raw message

board/kontron/smarc-sal28/rootfs_overlay/etc/udev/rules.d/70-enetc-networking.rules new file +8 -0
new file mode 100644
index 0000000000..8774bc5581
@@ -0,0 +1,8 @@
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.0", DRIVERS=="fsl_enetc", NAME="eno0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.1", DRIVERS=="fsl_enetc", NAME="eno1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.2", DRIVERS=="fsl_enetc", NAME="eno2"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.6", DRIVERS=="fsl_enetc", NAME="eno3"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.0", DRIVERS=="fsl_enetc_vf", NAME="eno0vf0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.1", DRIVERS=="fsl_enetc_vf", NAME="eno0vf1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.2", DRIVERS=="fsl_enetc_vf", NAME="eno1vf0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.3", DRIVERS=="fsl_enetc_vf", NAME="eno1vf1"
board/kontron/smarc-sal28/rootfs_overlay/etc/udev/rules.d/70-felix-networking.rules new file +6 -0
new file mode 100644
index 0000000000..917c0244ab
@@ -0,0 +1,6 @@
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p0", NAME="swp0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p1", NAME="swp1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p2", NAME="swp2"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p3", NAME="swp3"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p4", NAME="swp4"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p5", NAME="swp5"
board/kontron/smarc-sal28/rootfs_overlay/etc/udev/rules.d/71-smarc-networking.rules new file +19 -0
new file mode 100644
index 0000000000..8c946b05fe
@@ -0,0 +1,19 @@
+# Map the GBE0 and GBE1 names from the SMARC standard to the network
+# interfaces. This depends on the variant of the board.
+
+# get the variant compatible string
+PROGRAM=="/bin/grep '^kontron,sl28-var[1-4]$' /sys/firmware/devicetree/base/compatible", ENV{sl28_compatible}="%c"
+
+# variant 1
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.1", DRIVERS=="fsl_enetc", ENV{sl28_compatible}=="kontron,sl28-var1", NAME="gbe0"
+
+# variant 2
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p0", ENV{sl28_compatible}=="kontron,sl28-var2", NAME="gbe0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p1", ENV{sl28_compatible}=="kontron,sl28-var2", NAME="gbe1"
+
+# variant 3
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.0", DRIVERS=="fsl_enetc", ENV{sl28_compatible}=="kontron,sl28-var3", NAME="gbe0"
+
+# variant 4
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.0", DRIVERS=="fsl_enetc", ENV{sl28_compatible}=="kontron,sl28-var4", NAME="gbe0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.1", DRIVERS=="fsl_enetc", ENV{sl28_compatible}=="kontron,sl28-var4", NAME="gbe1"
configs/kontron_smarc_sal28_defconfig new file +22 -0
new file mode 100644
index 0000000000..8c6a9f249f
@@ -0,0 +1,22 @@
+BR2_aarch64=y
+BR2_cortex_a72=y
+BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_ROOTFS_OVERLAY="board/kontron/smarc-sal28/rootfs_overlay"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/kontron/smarc-sal28/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/kontron/smarc-sal28/linux.fragment"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-kontron-sl28 freescale/fsl-ls1028a-kontron-sl28-var2 freescale/fsl-ls1028a-kontron-sl28-var3-ads2 freescale/fsl-ls1028a-kontron-sl28-var4 freescale/fsl-ls1028a-kontron-kbox-a-230-ls"
+BR2_KERNEL_DTB_KEEP_DIRNAME=y
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_IPROUTE2=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Signature · 1 line
2.20.1