Skip to contentSkip to conversation

dt-bindings: Added device tree binding for max98390

PATCH In review Steve Lee 3 participants 3 messages Jun 2, 2020 – Jun 15, 2020

Subsystems (2)
lore
Share & tools
lore

Steve Lee

author
#0 lore raw

PATCH v7 1/1 dt-bindings: Added device tree binding for max98390

Add DT binding of max98390 amplifier driver.

---

Changed since V6:
* Re-confirm yaml dt binding check
* Add minimum and maximum value for each temperature_calib and r0_calib
* Add maxim prefix for naming.
Changed since V5:
* Change txt to yaml and fix up the examples.
Changed since V4:
* No changes.
Changed since V3:
* No changes.
Changed since V2:
* No changes.
Changed since V1:
* Modified sample text in example

 .../bindings/sound/maxim,max98390.yaml        | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98390.yaml
Documentation/devicetree/bindings/sound/maxim,max98390.yaml new file +51 -0
new file mode 100644
index 000000000000..e5ac35280da3
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98390.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98390 Speaker Amplifier with Integrated Dynamic Speaker Management
+
+maintainers:
+  - Steve Lee <[email protected]>
+
+properties:
+  compatible:
+      const: maxim,max98390
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  maxim,temperature_calib:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description: The calculated temperature data was measured while doing the calibration.
+    minimum: 0
+    maximum: 65535
+
+  maxim,r0_calib:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description: This is r0 calibration data which was measured in factory mode.
+    minimum: 1
+    maximum: 8388607
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      max98390: amplifier@38 {
+        compatible = "maxim,max98390";
+        reg = <0x38>;
+        maxim,temperature_calib = <1024>;
+        maxim,r0_calib = <100232>;
+      };
+    };
Signature · 1 line
2.17.1
maintainer Reviewed-by on v7 1/1
#1 lore raw
Quoted 20 lines · Steve Lee

Add DT binding of max98390 amplifier driver.

---

Changed since V6:
* Re-confirm yaml dt binding check
* Add minimum and maximum value for each temperature_calib and r0_calib
* Add maxim prefix for naming.
Changed since V5:
* Change txt to yaml and fix up the examples.
Changed since V4:
* No changes.
Changed since V3:
* No changes.
Changed since V2:
* No changes.
Changed since V1:
* Modified sample text in example

Quoted 4 lines
 .../bindings/sound/maxim,max98390.yaml        | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98390.yaml
maintainer
#2 lore raw
In reply to Steve Lee
Quoted 1 line · Steve Lee

Add DT binding of max98390 amplifier driver.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] dt-bindings: Added device tree binding for max98390

      commit: 6b76bf3e0ff66eee4b714921fbabd588f90ab1fb

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark