Skip to contentSkip to conversation

serial: Add missing Kconfig dependencies for debug consoles

PATCH New Michal Simek 3 participants 3 messages May 28, 2020 – Jun 4, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 serial: Add missing Kconfig dependencies for debug consoles

Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it.

Error:
aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc':
/home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function puts':
/home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch'

---

 drivers/serial/Kconfig | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/serial/Kconfig +12 -0
index 90e3983170ce..faf97a4c4c76 100644
@@ -189,6 +189,7 @@ choice
 
 config DEBUG_UART_ALTERA_JTAGUART
 	bool "Altera JTAG UART"
+	depends on ALTERA_JTAG_UART
 	help
 	  Select this to enable a debug UART using the altera_jtag_uart driver.
 	  You will need to provide parameters to make this work. The driver will
@@ -196,6 +197,7 @@ config DEBUG_UART_ALTERA_JTAGUART
 
 config DEBUG_UART_ALTERA_UART
 	bool "Altera UART"
+	depends on ALTERA_UART
 	help
 	  Select this to enable a debug UART using the altera_uart driver.
 	  You will need to provide parameters to make this work. The driver will
@@ -221,6 +223,7 @@ config DEBUG_ARC_SERIAL
 
 config DEBUG_UART_ATMEL
 	bool "Atmel USART"
+	depends on ATMEL_USART
 	help
 	  Select this to enable a debug UART using the atmel usart driver. You
 	  will need to provide parameters to make this work. The driver will
@@ -236,6 +239,7 @@ config DEBUG_UART_BCM6345
 
 config DEBUG_UART_NS16550
 	bool "ns16550"
+	depends on SYS_NS16550_SERIAL
 	help
 	  Select this to enable a debug UART using the ns16550 driver. You
 	  will need to provide parameters to make this work. The driver will
@@ -252,6 +256,7 @@ config DEBUG_EFI_CONSOLE
 
 config DEBUG_UART_S5P
 	bool "Samsung S5P"
+	depends on S5P
 	help
 	  Select this to enable a debug UART using the serial_s5p driver. You
 	  will need to provide parameters to make this work. The driver will
@@ -267,6 +272,7 @@ config DEBUG_UART_MESON
 
 config DEBUG_UART_UARTLITE
 	bool "Xilinx Uartlite"
+	depends on XILINX_UARTLITE
 	help
 	  Select this to enable a debug UART using the serial_uartlite driver.
 	  You will need to provide parameters to make this work. The driver will
@@ -274,6 +280,7 @@ config DEBUG_UART_UARTLITE
 
 config DEBUG_UART_ARM_DCC
 	bool "ARM DCC"
+	depends on ARM_DCC
 	help
 	  Select this to enable a debug UART using the ARM JTAG DCC port.
 	  The DCC port can be used for very early debugging and doesn't require
@@ -285,6 +292,7 @@ config DEBUG_UART_ARM_DCC
 
 config DEBUG_MVEBU_A3700_UART
 	bool "Marvell Armada 3700"
+	depends on MVEBU_A3700_UART
 	help
 	  Select this to enable a debug UART using the serial_mvebu driver. You
 	  will need to provide parameters to make this work. The driver will
@@ -307,6 +315,7 @@ config DEBUG_UART_APBUART
 
 config DEBUG_UART_PL010
 	bool "pl010"
+	depends on PL01X_SERIAL
 	help
 	  Select this to enable a debug UART using the pl01x driver with the
 	  PL010 UART type. You will need to provide parameters to make this
@@ -315,6 +324,7 @@ config DEBUG_UART_PL010
 
 config DEBUG_UART_PL011
 	bool "pl011"
+	depends on PL011_SERIAL
 	help
 	  Select this to enable a debug UART using the pl01x driver with the
 	  PL011 UART type. You will need to provide parameters to make this
@@ -348,6 +358,7 @@ config DEBUG_UART_SANDBOX
 
 config DEBUG_UART_SIFIVE
 	bool "SiFive UART"
+	depends on PL01X_SERIAL
 	help
 	  Select this to enable a debug UART using the serial_sifive driver. You
 	  will need to provide parameters to make this work. The driver will
@@ -373,6 +384,7 @@ config DEBUG_UART_UNIPHIER
 
 config DEBUG_UART_OMAP
 	bool "OMAP uart"
+	depends on OMAP_SERIAL
 	help
 	  Select this to enable a debug UART using the omap ns16550 driver.
 	  You will need to provide parameters to make this work. The driver
Signature · 1 line
2.26.2
#1 lore raw

PATCH 1/1 serial: Add missing Kconfig dependencies for debug consoles

Quoted 13 lines · Michal Simek

Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it.

Error:
aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc':
/home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function puts':
/home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch'

Quoted 5 lines

---

 drivers/serial/Kconfig | 12 ++++++++++++
 1 file changed, 12 insertions(+)
#2 lore raw

PATCH 1/1 serial: Add missing Kconfig dependencies for debug consoles

In reply to Michal Simek
Quoted 6 lines · Michal Simek

Debug console is the part of serial driver in the same file. It means to be able to enable debug console you also need to enable driver itself. That's why add all dependecies and list only debug consoles which are enabled based on driver selection to avoid compilation error when user asks for certain debug console but driver is not enable for it.

Quoted 8 lines

Error:
aarch64-linux-gnu-ld.bfd: common/built-in.o: in function `putc':
/home/monstr/data/disk/u-boot/common/console.c:513: undefined reference to printch' aarch64-linux-gnu-ld.bfd: common/built-in.o: in function puts':
/home/monstr/data/disk/u-boot/common/console.c:563: undefined reference to `printch'

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200604/db29ce51/attachment.sig>