Skip to contentSkip to conversation

accel: Allow targets to use Kconfig

PATCH Superseded Philippe Mathieu-Daudé 3 participants 23 messages Jun 5, 2020 – Jun 8, 2020 Kbuild

v6 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

v6 cover accel: Allow targets to use Kconfig

Missing review:
- 4/11 rules.mak: Add strequal() and startwith() rules
- 5/11 rules.mak: Add base-arch() rule

This series include generic patches I took of the KVM/ARM specific series which will follow.

- List orphan accelerators in MAINTAINERS
- Add accel/Kconfig
- Allow targets to use their how Kconfig

Since v5:
- Fixed typo in patch #4 subject
- Added David R-b tag
- Stripped --- comments

Since v4:
- Addressed rth review comments in rules.mak

Since v3:
- Fixed base-arch() rule (rth)
- Dropped 'semihosting: Make the feature depend of TCG'

Since v2:
- Addressed Thomas review comments
- Fixed problem when including TARGET instead of BASE_TARGET

Since v1:
https://www.mail-archive.com/[email protected]/msg689024.html
- Drop HVF MAINTAINERS patch (merged elsewhere)
- Kconfig-select SEMIHOSTING (bonzini)
- Drop user-mode selection patches
- consider m68k/nios2/xtensa/riscv (pm215)
- reword Kconfig SEMIHOSTING description (pm215)
- reset some of rth R-b tags

Previous RFC for semihosting posted earlier:
https://www.mail-archive.com/[email protected]/msg631218.html

Philippe Mathieu-Daudé (11):
MAINTAINERS: Fix KVM path expansion glob
MAINTAINERS: Add an 'overall' entry for accelerators
MAINTAINERS: Add an entry for the HAX accelerator rules.mak: Add strequal() and startwith() rules rules.mak: Add base-arch() rule
Makefile: Remove dangerous EOL trailing backslash
Makefile: Write MINIKCONF variables as one entry per line accel/Kconfig: Extract accel selectors into their own config accel/Kconfig: Add the TCG selector
Makefile: Allow target-specific optional Kconfig accel/tcg: Add stub for probe_access()

 Makefile               | 15 +++++++++----
 rules.mak              | 49 ++++++++++++++++++++++++++++++++++++++++++
 accel/stubs/tcg-stub.c |  7 ++++++
 Kconfig.host           |  7 ------
 MAINTAINERS            | 19 +++++++++++++++-
 accel/Kconfig          |  9 ++++++++
 6 files changed, 94 insertions(+), 12 deletions(-)
 create mode 100644 accel/Kconfig
Signature · 1 line
2.21.3
#1 lore raw

PATCH v6 1/11 MAINTAINERS: Fix KVM path expansion glob

The KVM files has been moved from target-ARCH to the target/ARCH/ folder in commit fcf5ef2a. Fix the pathname expansion.

Fixes fcf5ef2a ("Move target-* CPU file into a target/ folder")
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
MAINTAINERS +1 -1
index 3e7d9cb0a5..948790b433 100644
@@ -361,7 +361,7 @@ Overall KVM CPUs
 M: Paolo Bonzini <[email protected]>
 L: [email protected]
 S: Supported
-F: */kvm.*
+F: */*/kvm*
 F: accel/kvm/
 F: accel/stubs/kvm-stub.c
 F: include/hw/kvm/
Signature · 1 line
2.21.3
Reviewed-by on v6 1/11
#2 lore raw

Re: [PATCH v6 01/11] MAINTAINERS: Fix KVM path expansion glob

Quoted 7 lines · Philippe Mathieu-Daudé

The KVM files has been moved from target-ARCH to the target/ARCH/ folder in commit fcf5ef2a. Fix the pathname expansion.

Fixes fcf5ef2a ("Move target-* CPU file into a target/ folder")
Quoted 17 lines
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
MAINTAINERS +1 -1
index 3e7d9cb0a5..948790b433 100644
@@ -361,7 +361,7 @@ Overall KVM CPUs
 M: Paolo Bonzini <[email protected]>
 L: [email protected]
 S: Supported
-F: */kvm.*
+F: */*/kvm*
 F: accel/kvm/
 F: accel/stubs/kvm-stub.c
 F: include/hw/kvm/
Signature · 1 line
Alex Bennée
#3 lore raw

PATCH v6 2/11 MAINTAINERS: Add an 'overall' entry for accelerators

In reply to Philippe Mathieu-Daudé
---
 MAINTAINERS | 11 +++++++++++
 1 file changed, 11 insertions(+)
MAINTAINERS +11 -0
index 948790b433..f725c12161 100644
@@ -415,6 +415,17 @@ S: Supported
 F: target/i386/kvm.c
 F: scripts/kvm/vmxcap
 
+Guest CPU Cores (other accelerators)
+------------------------------------
+Overall
+M: Richard Henderson <[email protected]>
+R: Paolo Bonzini <[email protected]>
+S: Maintained
+F: include/sysemu/accel.h
+F: accel/accel.c
+F: accel/Makefile.objs
+F: accel/stubs/Makefile.objs
+
 X86 HVF CPUs
 M: Roman Bolshakov <[email protected]>
 S: Maintained
Signature · 1 line
2.21.3
Reviewed-by on v6 2/11
#4 lore raw

Re: [PATCH v6 02/11] MAINTAINERS: Add an 'overall' entry for accelerators

Quoted 2 lines · Philippe Mathieu-Daudé
Quoted 26 lines
---
 MAINTAINERS | 11 +++++++++++
 1 file changed, 11 insertions(+)
MAINTAINERS +11 -0
index 948790b433..f725c12161 100644
@@ -415,6 +415,17 @@ S: Supported
 F: target/i386/kvm.c
 F: scripts/kvm/vmxcap
 
+Guest CPU Cores (other accelerators)
+------------------------------------
+Overall
+M: Richard Henderson <[email protected]>
+R: Paolo Bonzini <[email protected]>
+S: Maintained
+F: include/sysemu/accel.h
+F: accel/accel.c
+F: accel/Makefile.objs
+F: accel/stubs/Makefile.objs
+
 X86 HVF CPUs
 M: Roman Bolshakov <[email protected]>
 S: Maintained
Signature · 1 line
Alex Bennée
#5 lore raw

PATCH v6 3/11 MAINTAINERS: Add an entry for the HAX accelerator

In reply to Philippe Mathieu-Daudé

Nobody replied since the first time [*] that patch was posted, so mark HAX as orphan.

[*] https://mid.mail-archive.com/[email protected]

Cc Tao Wu <[email protected]>
Cc Colin Xu <[email protected]>
Cc Wenchao Wang <[email protected]>
Cc Vincent Palatin <[email protected]>
Cc Sergio Andres Gomez Del Real <[email protected]>
---
 MAINTAINERS | 6 ++++++
 1 file changed, 6 insertions(+)
MAINTAINERS +6 -0
index f725c12161..05d7210204 100644
@@ -426,6 +426,12 @@ F: accel/accel.c
 F: accel/Makefile.objs
 F: accel/stubs/Makefile.objs
 
+HAX Accelerator
+S: Orphan
+F: accel/stubs/hax-stub.c
+F: target/i386/hax-all.c
+F: include/sysemu/hax.h
+
 X86 HVF CPUs
 M: Roman Bolshakov <[email protected]>
 S: Maintained
Signature · 1 line
2.21.3
#6 lore raw

RE: [PATCH v6 03/11] MAINTAINERS: Add an entry for the HAX accelerator

Hi, Philippe,

Sorry for missing your mail.

We are still maintaining HAX accelerator in QEMU. The status had been added as below in MAINTAINERS line 458. I noticed that the only difference with your commit is the last third line. The file accel/stubs/hax-stub.c is missed in the current files, while others are listed. Do you want to add this one only? And I will avoid missing emails in future and reply as soon as possible. Thanks.

Guest CPU Cores (HAXM)
---------------------
X86 HAXM CPUs
M: Wenchao Wang <[email protected]>
M: Colin Xu <[email protected]>
L: [email protected]
W: https://github.com/intel/haxm/issues
S: Maintained
+F: accel/stubs/hax-stub.c
F: include/sysemu/hax.h
F: target/i386/hax-*

Best Regards,
Wenchao

-----Original Message-----
From: Philippe Mathieu-Daudé <[email protected]>
Sent: Friday, June 5, 2020 17:33
To: [email protected]
Cc: Richard Henderson <[email protected]>; Paolo Bonzini <[email protected]>; Philippe Mathieu-Daudé <[email protected]>; haxm-team <[email protected]>; Tao Wu <[email protected]>; Xu, Colin <[email protected]>; Wang, Wenchao <[email protected]>; Vincent Palatin <[email protected]>; Sergio Andres Gomez Del Real <[email protected]>
Subject: [PATCH v6 03/11] MAINTAINERS: Add an entry for the HAX accelerator

Nobody replied since the first time [*] that patch was posted, so mark HAX as orphan.

[*] https://mid.mail-archive.com/[email protected]

Cc Tao Wu <[email protected]>
Cc Colin Xu <[email protected]>
Cc Wenchao Wang <[email protected]>
Cc Vincent Palatin <[email protected]>
Cc Sergio Andres Gomez Del Real <[email protected]>
---
 MAINTAINERS | 6 ++++++
 1 file changed, 6 insertions(+)
MAINTAINERS +6 -0
index f725c12161..05d7210204 100644
@@ -426,6 +426,12 @@ F: accel/accel.c
 F: accel/Makefile.objs
 F: accel/stubs/Makefile.objs
 
+HAX Accelerator
+S: Orphan
+F: accel/stubs/hax-stub.c
+F: target/i386/hax-all.c
+F: include/sysemu/hax.h
+
 X86 HVF CPUs
 M: Roman Bolshakov <[email protected]>
 S: Maintained

--
2.21.3

#7 lore raw

Re: [PATCH v6 03/11] MAINTAINERS: Add an entry for the HAX accelerator

Quoted 7 lines · Wenchao

Hi, Philippe,

Sorry for missing your mail.

We are still maintaining HAX accelerator in QEMU. The status had been added as below in MAINTAINERS line 458. I noticed that the only difference with your commit is the last third line. The file accel/stubs/hax-stub.c is missed in the current files, while others are listed. Do you want to add this one only? And I will avoid missing emails in future and reply as soon as possible. Thanks.

Quoted 11 lines

Guest CPU Cores (HAXM)
---------------------
X86 HAXM CPUs
M: Wenchao Wang <[email protected]>
M: Colin Xu <[email protected]>
L: [email protected]
W: https://github.com/intel/haxm/issues
S: Maintained
+F: accel/stubs/hax-stub.c
F: include/sysemu/hax.h
F: target/i386/hax-*

I missed it, sorry.

Quoted 47 lines

Best Regards,
Wenchao

-----Original Message-----
From: Philippe Mathieu-Daudé <[email protected]>
Sent: Friday, June 5, 2020 17:33
To: [email protected]
Cc: Richard Henderson <[email protected]>; Paolo Bonzini <[email protected]>; Philippe Mathieu-Daudé <[email protected]>; haxm-team <[email protected]>; Tao Wu <[email protected]>; Xu, Colin <[email protected]>; Wang, Wenchao <[email protected]>; Vincent Palatin <[email protected]>; Sergio Andres Gomez Del Real <[email protected]>
Subject: [PATCH v6 03/11] MAINTAINERS: Add an entry for the HAX accelerator

Nobody replied since the first time [*] that patch was posted, so mark HAX as orphan.

[*] https://mid.mail-archive.com/[email protected]

Cc Tao Wu <[email protected]>
Cc Colin Xu <[email protected]>
Cc Wenchao Wang <[email protected]>
Cc Vincent Palatin <[email protected]>
Cc Sergio Andres Gomez Del Real <[email protected]>
---
 MAINTAINERS | 6 ++++++
 1 file changed, 6 insertions(+)
MAINTAINERS +6 -1
index f725c12161..05d7210204 100644
@@ -426,6 +426,12 @@ F: accel/accel.c
 F: accel/Makefile.objs
 F: accel/stubs/Makefile.objs
 
+HAX Accelerator
+S: Orphan
+F: accel/stubs/hax-stub.c
+F: target/i386/hax-all.c
+F: include/sysemu/hax.h
+
 X86 HVF CPUs
 M: Roman Bolshakov <[email protected]>
 S: Maintained
--

2.21.3

#8 lore raw

PATCH v6 4/11 rules.mak: Add strequal() and startwith() rules

In reply to Philippe Mathieu-Daudé

Add a rule to test if two strings are equal, and another to test if a string starts with a substring.

---
 rules.mak | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
rules.mak +14 -0
index 694865b63e..ccc1c49604 100644
@@ -191,6 +191,20 @@ ne = $(if $(subst $2,,$1)$(subst $1,,$2),y,n)
 isempty = $(if $1,n,y)
 notempty = $(if $1,y,n)
 
+# strequal
+# Usage: $(call strequal, str1, str2)
+#
+# This macro returns a string (TRUE) when @str1 and @str2
+# are equal, else returns the empty string (FALSE)
+strequal = $(if $(subst $2,,$1)$(subst $1,,$2),,$1)
+
+# startwith
+# Usage: $(call startwith, startstr, fullstr)
+#
+# This macro returns a string (TRUE) when @fullstr starts with
+# @startstr, else returns the empty string (FALSE)
+startwith = $(findstring :$1,:$2)
+
 # Generate files with tracetool
 TRACETOOL=$(PYTHON) $(SRC_PATH)/scripts/tracetool.py
 
Signature · 1 line
2.21.3
#9 lore raw

PATCH v6 5/11 rules.mak: Add base-arch() rule

In reply to Philippe Mathieu-Daudé

Add a rule to return the base architecture for a QEMU target.

The current list of TARGET_BASE_ARCH is:

  $ git grep  TARGET_BASE_ARCH configure
  configure:7785:TARGET_BASE_ARCH=""
  configure:7795:    TARGET_BASE_ARCH=i386
  configure:7813:    TARGET_BASE_ARCH=arm
  configure:7846:    TARGET_BASE_ARCH=mips
  configure:7854:    TARGET_BASE_ARCH=mips
  configure:7864:    TARGET_BASE_ARCH=openrisc
  configure:7871:    TARGET_BASE_ARCH=ppc
  configure:7879:    TARGET_BASE_ARCH=ppc
  configure:7887:    TARGET_BASE_ARCH=ppc
  configure:7894:    TARGET_BASE_ARCH=riscv
  configure:7900:    TARGET_BASE_ARCH=riscv
  configure:7920:    TARGET_BASE_ARCH=sparc
  configure:7925:    TARGET_BASE_ARCH=sparc

The rule can be tested calling 'print-base-arch-$TARGET':

  $ make \
      print-base-arch-openrisc \
      print-base-arch-aarch64_be \
      print-base-arch-x86_64 \
      print-base-arch-mips64el \
      print-base-arch-ppc64 \
      print-base-arch-riscv64
  openrisc=openrisc
  aarch64_be=arm
  x86_64=i386
  mips64el=mips
  ppc64=ppc
  riscv64=riscv
---
 rules.mak | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
rules.mak +35 -0
index ccc1c49604..907f9aca91 100644
@@ -452,3 +452,38 @@ atomic = $(eval $1: $(call sentinel,$1) ; @:) \
 
 print-%:
 	@echo '$*=$($*)'
+
+# base-arch
+# Usage: $(call base-arch, target)
+#
+# @target: the target architecture.
+#
+# This macro will return the base architecture for a target.
+#
+# As example, $(call base-arch, aarch64) returns 'arm'.
+base-arch = $(strip \
+		$(if $(call startwith,aarch64,$1),arm,\
+		  $(if $(call startwith,arm,$1),arm,\
+		    $(if $(call startwith,microblaze,$1),microblaze,\
+		      $(if $(call startwith,mips,$1),mips,\
+		        $(if $(call startwith,ppc,$1),ppc,\
+		          $(if $(call startwith,riscv,$1),riscv,\
+		            $(if $(call startwith,sh4,$1),sh4,\
+		              $(if $(call startwith,sparc,$1),sparc,\
+		                $(if $(call startwith,xtensa,$1),xtensa,\
+		                  $(if $(call strequal,x86_64,$1),i386,\
+		                    $1\
+		                   )\
+		                 )\
+		               )\
+		             )\
+		           )\
+		         )\
+		       )\
+		     )\
+		   )\
+		 )\
+		)
+
+print-base-arch-%:
+	@echo '$*=$(call base-arch,$*)'
Signature · 1 line
2.21.3
#10 lore raw

Re: [PATCH v6 05/11] rules.mak: Add base-arch() rule

Quoted 4 lines · Philippe Mathieu-Daudé

Add a rule to return the base architecture for a QEMU target.

The current list of TARGET_BASE_ARCH is:

Quoted 14 lines
  $ git grep  TARGET_BASE_ARCH configure
  configure:7785:TARGET_BASE_ARCH=""
  configure:7795:    TARGET_BASE_ARCH=i386
  configure:7813:    TARGET_BASE_ARCH=arm
  configure:7846:    TARGET_BASE_ARCH=mips
  configure:7854:    TARGET_BASE_ARCH=mips
  configure:7864:    TARGET_BASE_ARCH=openrisc
  configure:7871:    TARGET_BASE_ARCH=ppc
  configure:7879:    TARGET_BASE_ARCH=ppc
  configure:7887:    TARGET_BASE_ARCH=ppc
  configure:7894:    TARGET_BASE_ARCH=riscv
  configure:7900:    TARGET_BASE_ARCH=riscv
  configure:7920:    TARGET_BASE_ARCH=sparc
  configure:7925:    TARGET_BASE_ARCH=sparc

This seems backwards. We encode the base architecture in configure.sh because this is where we can make such distinctions. We then:

echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak

Precisely so the make system can know what it is for any given target. So:

Quoted 21 lines
rules.mak +21 -0
+# base-arch
+# Usage: $(call base-arch, target)
+#
+# @target: the target architecture.
+#
+# This macro will return the base architecture for a target.
+#
+# As example, $(call base-arch, aarch64) returns 'arm'.
+base-arch = $(strip \
+		$(if $(call startwith,aarch64,$1),arm,\
+		  $(if $(call startwith,arm,$1),arm,\
+		    $(if $(call startwith,microblaze,$1),microblaze,\
+		      $(if $(call startwith,mips,$1),mips,\
+		        $(if $(call startwith,ppc,$1),ppc,\
+		          $(if $(call startwith,riscv,$1),riscv,\
+		            $(if $(call startwith,sh4,$1),sh4,\
+		              $(if $(call startwith,sparc,$1),sparc,\
+		                $(if $(call startwith,xtensa,$1),xtensa,\
+		                  $(if $(call strequal,x86_64,$1),i386,\
+		                    $1\
+		                   )\

rules.mak atomic = $(eval $1: $(call sentinel,$1) ; @:) \ · line 486

Quoted 10 lines
rules.mak +10 -0
+		                 )\
+		               )\
+		             )\
+		           )\
+		         )\
+		       )\
+		     )\
+		   )\
+		 )\
+		)

Seems like a replication of information already calculated in configure and prone to breakage if we add a new one (or come up with some franken architecture at a later date).

Signature · 1 line
Alex Bennée
#11 lore raw

PATCH v6 6/11 Makefile: Remove dangerous EOL trailing backslash

In reply to Philippe Mathieu-Daudé

One might get caught trying to understand unexpected Makefile behavior. Trailing backslash can help to split very long lines, but are rather dangerous when nothing follow. Preserve other developers debugging time by removing this one.

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Makefile +1 -1
index 40e4f7677b..6c9d718b2c 100644
@@ -420,7 +420,7 @@ MINIKCONF_ARGS = \
 
 MINIKCONF_INPUTS = $(SRC_PATH)/Kconfig.host $(SRC_PATH)/hw/Kconfig
 MINIKCONF_DEPS = $(MINIKCONF_INPUTS) $(wildcard $(SRC_PATH)/hw/*/Kconfig)
-MINIKCONF = $(PYTHON) $(SRC_PATH)/scripts/minikconf.py \
+MINIKCONF = $(PYTHON) $(SRC_PATH)/scripts/minikconf.py
 
 $(SUBDIR_DEVICES_MAK): %/config-devices.mak: default-configs/%.mak $(MINIKCONF_DEPS) $(BUILD_DIR)/config-host.mak
 	$(call quiet-command, $(MINIKCONF) $(MINIKCONF_ARGS) > [email protected], "GEN", "[email protected]")
Signature · 1 line
2.21.3
Reviewed-by on v6 6/11
#12 lore raw

Re: [PATCH v6 06/11] Makefile: Remove dangerous EOL trailing backslash

Quoted 8 lines · Philippe Mathieu-Daudé

One might get caught trying to understand unexpected Makefile behavior. Trailing backslash can help to split very long lines, but are rather dangerous when nothing follow. Preserve other developers debugging time by removing this one.

Signature · 1 line
Alex Bennée
#13 lore raw

PATCH v6 7/11 Makefile: Write MINIKCONF variables as one entry per line

In reply to Philippe Mathieu-Daudé

Having one entry per line helps reviews/refactors. As we are going to modify the MINIKCONF variables, split them now to ease further review.

---
 Makefile | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
Makefile +6 -3
index 6c9d718b2c..7666f81e8a 100644
@@ -418,12 +418,15 @@ MINIKCONF_ARGS = \
     CONFIG_LINUX=$(CONFIG_LINUX) \
     CONFIG_PVRDMA=$(CONFIG_PVRDMA)
 
-MINIKCONF_INPUTS = $(SRC_PATH)/Kconfig.host $(SRC_PATH)/hw/Kconfig
-MINIKCONF_DEPS = $(MINIKCONF_INPUTS) $(wildcard $(SRC_PATH)/hw/*/Kconfig)
+MINIKCONF_INPUTS = $(SRC_PATH)/Kconfig.host \
+                   $(SRC_PATH)/hw/Kconfig
+MINIKCONF_DEPS = $(MINIKCONF_INPUTS) \
+                 $(wildcard $(SRC_PATH)/hw/*/Kconfig)
 MINIKCONF = $(PYTHON) $(SRC_PATH)/scripts/minikconf.py
 
 $(SUBDIR_DEVICES_MAK): %/config-devices.mak: default-configs/%.mak $(MINIKCONF_DEPS) $(BUILD_DIR)/config-host.mak
-	$(call quiet-command, $(MINIKCONF) $(MINIKCONF_ARGS) > [email protected], "GEN", "[email protected]")
+	$(call quiet-command, $(MINIKCONF) $(MINIKCONF_ARGS) \
+		> [email protected], "GEN", "[email protected]")
 	$(call quiet-command, if test -f $@; then \
 	  if cmp -s [email protected] $@; then \
 	    mv [email protected] $@; \
Signature · 1 line
2.21.3
Reviewed-by on v6 7/11
#14 lore raw

Re: [PATCH v6 07/11] Makefile: Write MINIKCONF variables as one entry per line

Quoted 6 lines · Philippe Mathieu-Daudé

Having one entry per line helps reviews/refactors. As we are going to modify the MINIKCONF variables, split them now to ease further review.

Signature · 1 line
Alex Bennée
#15 lore raw

PATCH v6 8/11 accel/Kconfig: Extract accel selectors into their own config

In reply to Philippe Mathieu-Daudé

Move the accel selectors from the global Kconfig.host to their own Kconfig file.

---
 Makefile      | 1 +
 Kconfig.host  | 7 -------
 accel/Kconfig | 6 ++++++
 3 files changed, 7 insertions(+), 7 deletions(-)
 create mode 100644 accel/Kconfig
Makefile +1 -0
index 7666f81e8a..648757f79a 100644
@@ -419,6 +419,7 @@ MINIKCONF_ARGS = \
     CONFIG_PVRDMA=$(CONFIG_PVRDMA)
 
 MINIKCONF_INPUTS = $(SRC_PATH)/Kconfig.host \
+                   $(SRC_PATH)/accel/Kconfig \
                    $(SRC_PATH)/hw/Kconfig
 MINIKCONF_DEPS = $(MINIKCONF_INPUTS) \
                  $(wildcard $(SRC_PATH)/hw/*/Kconfig)
Kconfig.host +0 -7
index 55136e037d..a6d871c399 100644
@@ -2,9 +2,6 @@
 # down to Kconfig.  See also MINIKCONF_ARGS in the Makefile:
 # these two need to be kept in sync.
 
-config KVM
-    bool
-
 config LINUX
     bool
 
@@ -31,10 +28,6 @@ config VHOST_KERNEL
     bool
     select VHOST
 
-config XEN
-    bool
-    select FSDEV_9P if VIRTFS
-
 config VIRTFS
     bool
 
accel/Kconfig new file +6 -0
new file mode 100644
index 0000000000..c21802bb49
@@ -0,0 +1,6 @@
+config KVM
+    bool
+
+config XEN
+    bool
+    select FSDEV_9P if VIRTFS
Signature · 1 line
2.21.3
#17 lore raw

PATCH v6 9/11 accel/Kconfig: Add the TCG selector

In reply to Philippe Mathieu-Daudé

Expose the CONFIG_TCG selector to let minikconf.py uses it.

When building with --disable-tcg build, this helps to deselect devices that are TCG-dependent.

---
 Makefile      | 1 +
 accel/Kconfig | 3 +++
 2 files changed, 4 insertions(+)
Makefile +1 -0
index 648757f79a..f8a45e1379 100644
@@ -405,6 +405,7 @@ endif
 MINIKCONF_ARGS = \
     $(CONFIG_MINIKCONF_MODE) \
     $@ $*/config-devices.mak.d $< $(MINIKCONF_INPUTS) \
+    CONFIG_TCG=$(CONFIG_TCG) \
     CONFIG_KVM=$(CONFIG_KVM) \
     CONFIG_SPICE=$(CONFIG_SPICE) \
     CONFIG_IVSHMEM=$(CONFIG_IVSHMEM) \
accel/Kconfig +3 -0
index c21802bb49..2ad94a3839 100644
@@ -1,3 +1,6 @@
+config TCG
+    bool
+
 config KVM
     bool
 
Signature · 1 line
2.21.3
Reviewed-by on v6 9/11
#18 lore raw

Re: [PATCH v6 09/11] accel/Kconfig: Add the TCG selector

Quoted 7 lines · Philippe Mathieu-Daudé

Expose the CONFIG_TCG selector to let minikconf.py uses it.

When building with --disable-tcg build, this helps to deselect devices that are TCG-dependent.

Signature · 1 line
Alex Bennée
#19 lore raw

PATCH v6 10/11 Makefile: Allow target-specific optional Kconfig

In reply to Philippe Mathieu-Daudé

Allow use of target-specific Kconfig file.

---
 Makefile | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Makefile +3 -1
index f8a45e1379..d5009cd304 100644
@@ -423,11 +423,13 @@ MINIKCONF_INPUTS = $(SRC_PATH)/Kconfig.host \
                    $(SRC_PATH)/accel/Kconfig \
                    $(SRC_PATH)/hw/Kconfig
 MINIKCONF_DEPS = $(MINIKCONF_INPUTS) \
-                 $(wildcard $(SRC_PATH)/hw/*/Kconfig)
+                 $(wildcard $(SRC_PATH)/hw/*/Kconfig) \
+                 $(wildcard $(SRC_PATH)/target/*/Kconfig)
 MINIKCONF = $(PYTHON) $(SRC_PATH)/scripts/minikconf.py
 
 $(SUBDIR_DEVICES_MAK): %/config-devices.mak: default-configs/%.mak $(MINIKCONF_DEPS) $(BUILD_DIR)/config-host.mak
 	$(call quiet-command, $(MINIKCONF) $(MINIKCONF_ARGS) \
+		$(wildcard $(SRC_PATH)/target/$(call base-arch, $(firstword $(subst -, ,$@)))/Kconfig) \
 		> [email protected], "GEN", "[email protected]")
 	$(call quiet-command, if test -f $@; then \
 	  if cmp -s [email protected] $@; then \
Signature · 1 line
2.21.3
Reviewed-by on v6 10/11
#20 lore raw

Re: [PATCH v6 10/11] Makefile: Allow target-specific optional Kconfig

Quoted 14 lines · Philippe Mathieu-Daudé

Allow use of target-specific Kconfig file.

---
 Makefile | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Makefile +0 -0
index f8a45e1379..d5009cd304 100644
@@ -423,11 +423,13 @@ MINIKCONF_INPUTS = $(SRC_PATH)/Kconfig.host \
                    $(SRC_PATH)/accel/Kconfig \

Makefile MINIKCONF_INPUTS = $(SRC_PATH)/Kconfig.host \ · line 432

Quoted 10 lines
Makefile +3 -1
                    $(SRC_PATH)/hw/Kconfig
 MINIKCONF_DEPS = $(MINIKCONF_INPUTS) \
-                 $(wildcard $(SRC_PATH)/hw/*/Kconfig)
+                 $(wildcard $(SRC_PATH)/hw/*/Kconfig) \
+                 $(wildcard $(SRC_PATH)/target/*/Kconfig)
 MINIKCONF = $(PYTHON) $(SRC_PATH)/scripts/minikconf.py
 
 $(SUBDIR_DEVICES_MAK): %/config-devices.mak: default-configs/%.mak $(MINIKCONF_DEPS) $(BUILD_DIR)/config-host.mak
 	$(call quiet-command, $(MINIKCONF) $(MINIKCONF_ARGS) \
+		$(wildcard $(SRC_PATH)/target/$(call base-arch, $(firstword $(subst -, ,$@)))/Kconfig) \

As discussed on IRC I think we can emit base-arch into config-host.mak from exiting data and then utilise that rather than re-coding the data inside rules.mak.

Otherwise:

Signature · 1 line
Alex Bennée
#21 lore raw

PATCH v6 11/11 accel/tcg: Add stub for probe_access()

In reply to Philippe Mathieu-Daudé

From: Philippe Mathieu-Daudé <[email protected]>

The TCG helpers where added in b92e5a22ec3 in softmmu_template.h. probe_write() was added in there in 3b4afc9e75a to be moved out to accel/tcg/cputlb.c in 3b08f0a9254, and was later refactored as probe_access() in c25c283df0f.
Since it is a TCG specific helper, add a stub to avoid failures when building without TCG, such:

target/arm/helper.o: In function `probe_read':
include/exec/exec-all.h:362: undefined reference to `probe_access'

---
 accel/stubs/tcg-stub.c | 7 +++++++
 1 file changed, 7 insertions(+)
accel/stubs/tcg-stub.c +7 -0
index 677191a69c..e4bbf997aa 100644
@@ -22,3 +22,10 @@ void tb_flush(CPUState *cpu)
 void tlb_set_dirty(CPUState *cpu, target_ulong vaddr)
 {
 }
+
+void *probe_access(CPUArchState *env, target_ulong addr, int size,
+                   MMUAccessType access_type, int mmu_idx, uintptr_t retaddr)
+{
+     /* Handled by hardware accelerator. */
+     g_assert_not_reached();
+}
Signature · 1 line
2.21.3
Reviewed-by on v6 11/11
#22 lore raw

Re: [PATCH v6 11/11] accel/tcg: Add stub for probe_access()

Quoted 9 lines · Philippe Mathieu-Daudé

From: Philippe Mathieu-Daudé <[email protected]>

The TCG helpers where added in b92e5a22ec3 in softmmu_template.h. probe_write() was added in there in 3b4afc9e75a to be moved out to accel/tcg/cputlb.c in 3b08f0a9254, and was later refactored as probe_access() in c25c283df0f.
Since it is a TCG specific helper, add a stub to avoid failures when building without TCG, such:

Quoted 6 lines

target/arm/helper.o: In function `probe_read':
include/exec/exec-all.h:362: undefined reference to `probe_access'

Signature · 1 line
Alex Bennée