Skip to contentSkip to conversation

PCI: brcmstb: enable PCIe for STB chips

PATCH Superseded Jim Quinlan 4 participants 19 messages Jun 5, 2020 – Jun 15, 2020

Subsystems (30)

v4 of 12 Superseded Latest is v12 →

lore
Share & tools
lore
#0 lore raw

v4 cover PCI: brcmstb: enable PCIe for STB chips

v4:
Commit "device core: Introduce multiple dma pfn offsets" -- of_dma_get_range() does not take a dev param but instead
takes two "out" params: map and map_size. We do this so that the code that parses dma-ranges is separate from
the code that modifies 'dev'. (Nicolas)
-- the separate case of having a single pfn offset has
been removed and is now processed by going through the map array. (Nicolas)
-- move attach_uniform_dma_pfn_offset() from of/address.c to
dma/mapping.c so that it does not depend on CONFIG_OF. (Nicolas)
-- devm_kcalloc => devm_kzalloc (DanC)
-- add/fix assignment to dev->dma_pfn_offset_map for func
attach_uniform_dma_pfn_offset() (DanC, Nicolas)
-- s/struct dma_pfn_offset_region/struct bus_dma_region/ (Nicolas) -- s/attach_uniform_dma_pfn_offset/dma_attach_uniform_pfn_offset/ -- s/attach_dma_pfn_offset_map/dma_attach_pfn_offset_map/ -- More use of PFN_{PHYS,DOWN,UP}. (AndyS)
Commit "of: Include a dev param in of_dma_get_range()" -- this commit was sqaushed with "device core: Introduce ..."

v3:
Commit "device core: Introduce multiple dma pfn offsets" Commit "arm: dma-mapping: Invoke dma offset func if needed" -- The above two commits have been squashed. More importantly,
the code has been modified so that the functionality for multiple pfn offsets subsumes the use of dev->dma_pfn_offset. In fact, dma_pfn_offset is removed and supplanted by dma_pfn_offset_map, which is a pointer to an array. The more common case of a uniform offset is now handled as a map with a single entry, while cases requiring multiple pfn offsets use a map with multiple entries. Code paths that used to do this:

dev->dma_pfn_offset = mydrivers_pfn_offset;

have been changed to do this:

attach_uniform_dma_pfn_offset(dev, pfn_offset);

Commit "dt-bindings: PCI: Add bindings for more Brcmstb chips" -- Add if/then clause for required props: resets, reset-names (RobH) -- Change compatible list from const to enum (RobH)
-- Change list of u32-tuples to u64 (RobH)

Commit "of: Include a dev param in of_dma_get_range()"
-- modify of/unittests.c to add NULL param in of_dma_get_range() call.

Commit "device core: Add ability to handle multiple dma offsets" -- align comment in device.h (AndyS).
-- s/cpu_beg/cpu_start/ and s/dma_beg/dma_start/ in struct
dma_pfn_offset_region (AndyS).

v2:
Commit: "device core: Add ability to handle multiple dma offsets"
o Added helper func attach_dma_pfn_offset_map() in address.c (Chistoph)
o Helpers funcs added to __phys_to_dma() & __dma_to_phys() (Christoph)
o Added warning when multiple offsets are needed and !DMA_PFN_OFFSET_MAP
o dev->dma_pfn_map => dev->dma_pfn_offset_map
o s/frm/from/ for dma_pfn_offset_frm_{phys,dma}_addr() (Christoph)
o In device.h: s/const void */const struct dma_pfn_offset_region */
o removed 'unlikely' from unlikely(dev->dma_pfn_offset_map) since guarded by CONFIG_DMA_PFN_OFFSET_MAP (Christoph)
o Since dev->dma_pfn_offset is copied in usb/core/{usb,message}.c, now

    dev->dma_pfn_offset_map is copied as well.

o Merged two of the DMA commits into one (Christoph).

Commit "arm: dma-mapping: Invoke dma offset func if needed":
o Use helper functions instead of #if CONFIG_DMA_PFN_OFFSET

Other commits' changes:
o Removed need for carrying of_id var in priv (Nicolas)
o Commit message rewordings (Bjorn)
o Commit log messages filled to 75 chars (Bjorn)
o devm_reset_control_get_shared())
=> devm_reset_control_get_optional_shared (Philipp)
o Add call to reset_control_assert() in PCIe remove routines (Philipp)

v1:
This patchset expands the usefulness of the Broadcom Settop Box PCIe controller by building upon the PCIe driver used currently by the Raspbery Pi. Other forms of this patchset were submitted by me years ago and not accepted; the major sticking point was the code required for the DMA remapping needed for the PCIe driver to work [1].

There have been many changes to the DMA and OF subsystems since that time, making a cleaner and less intrusive patchset possible. This patchset implements a generalization of "dev->dma_pfn_offset", except that instead of a single scalar offset it provides for multiple offsets via a function which depends upon the "dma-ranges" property of the PCIe host controller. This is required for proper functionality of the BrcmSTB PCIe controller and possibly some other devices.

[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/

Jim Quinlan (12):
PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB
ata: ahci_brcm: Fix use of BCM7216 reset controller
dt-bindings: PCI: Add bindings for more Brcmstb chips
PCI: brcmstb: Add bcm7278 register info
PCI: brcmstb: Add suspend and resume pm_ops
PCI: brcmstb: Add bcm7278 PERST support
PCI: brcmstb: Add control of rescal reset
device core: Introduce multiple dma pfn offsets
PCI: brcmstb: Set internal memory viewport sizes
PCI: brcmstb: Accommodate MSI for older chips
PCI: brcmstb: Set bus max burst size by chip type
PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list

 .../bindings/pci/brcm,stb-pcie.yaml           |  58 ++-
 arch/arm/include/asm/dma-mapping.h            |   9 +-
 arch/arm/mach-keystone/keystone.c             |   9 +-
 arch/sh/drivers/pci/pcie-sh7786.c             |   3 +-
 arch/sh/kernel/dma-coherent.c                 |  14 +-
 arch/x86/pci/sta2x11-fixup.c                  |   7 +-
 drivers/acpi/arm64/iort.c                     |   5 +-
 drivers/ata/ahci_brcm.c                       |  14 +-
 drivers/gpu/drm/sun4i/sun4i_backend.c         |   5 +-
 drivers/iommu/io-pgtable-arm.c                |   2 +-
 .../platform/sunxi/sun4i-csi/sun4i_csi.c      |   5 +-
 .../platform/sunxi/sun6i-csi/sun6i_csi.c      |   4 +-
 drivers/of/address.c                          |  72 +++-
 drivers/of/device.c                           |  19 +-
 drivers/of/of_private.h                       |  11 +-
 drivers/of/unittest.c                         |   8 +-
 drivers/pci/controller/Kconfig                |   3 +-
 drivers/pci/controller/pcie-brcmstb.c         | 408 +++++++++++++++---
 drivers/remoteproc/remoteproc_core.c          |   2 +-
 .../staging/media/sunxi/cedrus/cedrus_hw.c    |   7 +-
 drivers/usb/core/message.c                    |   4 +-
 drivers/usb/core/usb.c                        |   2 +-
 include/linux/device.h                        |   4 +-
 include/linux/dma-direct.h                    |  16 +-
 include/linux/dma-mapping.h                   |  38 ++
 kernel/dma/coherent.c                         |  11 +-
 kernel/dma/mapping.c                          |  38 ++
 27 files changed, 647 insertions(+), 131 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v4 1/12 PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB

From: Jim Quinlan <[email protected]>

Have PCIE_BRCMSTB depend on ARCH_BRCMSTB. Also set the default value to ARCH_BRCMSTB.

---
 drivers/pci/controller/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/pci/controller/Kconfig +2 -1
index 91bfdb784829..c0f3d4d10047 100644
@@ -244,9 +244,10 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
+	default ARCH_BRCMSTB
 	help
 	  Say Y here to enable PCIe host controller support for
 	  Broadcom STB based SoCs, like the Raspberry Pi 4.
Signature · 1 line
2.17.1
#2 lore raw

PATCH v4 2/12 ata: ahci_brcm: Fix use of BCM7216 reset controller

In reply to Jim Quinlan

From: Jim Quinlan <[email protected]>

A reset controller "rescal" is shared between the AHCI driver and the PCIe driver for the BrcmSTB 7216 chip. The code is modified to allow this sharing and to deassert() properly.

Fixes 272ecd60a636 ("ata: ahci_brcm: BCM7216 reset is self de-asserting")
Fixes c345ec6a50e9 ("ata: ahci_brcm: Support BCM7216 reset controller

name")

---
 drivers/ata/ahci_brcm.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)
drivers/ata/ahci_brcm.c +5 -9
index 6853dbb4131d..c4ea555573dd 100644
@@ -428,7 +428,6 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id;
 	struct device *dev = &pdev->dev;
-	const char *reset_name = NULL;
 	struct brcm_ahci_priv *priv;
 	struct ahci_host_priv *hpriv;
 	struct resource *res;
@@ -452,11 +451,11 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 
 	/* Reset is optional depending on platform and named differently */
 	if (priv->version == BRCM_SATA_BCM7216)
-		reset_name = "rescal";
+		priv->rcdev = devm_reset_control_get_optional_shared(&pdev->dev,
+								     "rescal");
 	else
-		reset_name = "ahci";
-
-	priv->rcdev = devm_reset_control_get_optional(&pdev->dev, reset_name);
+		priv->rcdev = devm_reset_control_get_optional(&pdev->dev,
+							      "ahci");
 	if (IS_ERR(priv->rcdev))
 		return PTR_ERR(priv->rcdev);
 
@@ -479,10 +478,7 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 		break;
 	}
 
-	if (priv->version == BRCM_SATA_BCM7216)
-		ret = reset_control_reset(priv->rcdev);
-	else
-		ret = reset_control_deassert(priv->rcdev);
+	ret = reset_control_deassert(priv->rcdev);
 	if (ret)
 		return ret;
 
Signature · 1 line
2.17.1
#3 lore raw

PATCH v4 3/12 dt-bindings: PCI: Add bindings for more Brcmstb chips

In reply to Jim Quinlan

From: Jim Quinlan <[email protected]>

- Add compatible strings for three more Broadcom STB chips: 7278, 7216, 7211 (STB version of RPi4).
- add new property 'brcm,scb-sizes'
- add new property 'resets'
- add new property 'reset-names' for 7216 only
- allow 'ranges' and 'dma-ranges' to have more than one item and update the example to show this.

---
 .../bindings/pci/brcm,stb-pcie.yaml           | 58 ++++++++++++++++---
 1 file changed, 51 insertions(+), 7 deletions(-)
Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +51 -7
index 8680a0f86c5a..4a012d77513f 100644
@@ -9,12 +9,15 @@ title: Brcmstb PCIe Host Controller Device Tree Bindings
 maintainers:
   - Nicolas Saenz Julienne <[email protected]>
 
-allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
-
 properties:
   compatible:
-    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+    items:
+      - enum:
+          - brcm,bcm2711-pcie # The Raspberry Pi 4
+          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+          - brcm,bcm7278-pcie # Broadcom 7278 Arm
+          - brcm,bcm7216-pcie # Broadcom 7216 Arm
+          - brcm,bcm7445-pcie # Broadcom 7445 Arm
 
   reg:
     maxItems: 1
@@ -34,10 +37,12 @@ properties:
       - const: msi
 
   ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
 
   dma-ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 6
 
   clocks:
     maxItems: 1
@@ -58,8 +63,33 @@ properties:
 
   aspm-no-l0s: true
 
+  resets:
+    description: for "brcm,bcm7216-pcie", must be a valid reset
+      phandle pointing to the RESCAL reset controller provider node.
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  reset-names:
+    items:
+      - const: rescal
+
+  brcm,scb-sizes:
+    description: u64 giving the 64bit PCIe memory
+      viewport size of a memory controller.  There may be up to
+      three controllers, and each size must be a power of two
+      with a size greater or equal to the amount of memory the
+      controller supports.  Note that each memory controller
+      may have two component regions -- base and extended -- so
+      this information cannot be deduced from the dma-ranges.
+
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint64-array
+      - items:
+          minItems: 1
+          maxItems: 3
+
 required:
   - reg
+  - ranges
   - dma-ranges
   - "#interrupt-cells"
   - interrupts
@@ -68,6 +98,18 @@ required:
   - interrupt-map
   - msi-controller
 
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7216-pcie
+    then:
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples:
@@ -93,7 +135,9 @@ examples:
                     msi-parent = <&pcie0>;
                     msi-controller;
                     ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
-                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
+                    brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
             };
     };
Signature · 1 line
2.17.1
maintainer Reviewed-by on v4 3/12
#4 lore raw

Re: [PATCH v4 03/12] dt-bindings: PCI: Add bindings for more Brcmstb chips

Quoted 71 lines · Jim Quinlan

From: Jim Quinlan <[email protected]>

- Add compatible strings for three more Broadcom STB chips: 7278, 7216, 7211 (STB version of RPi4).
- add new property 'brcm,scb-sizes'
- add new property 'resets'
- add new property 'reset-names' for 7216 only
- allow 'ranges' and 'dma-ranges' to have more than one item and update the example to show this.

---
 .../bindings/pci/brcm,stb-pcie.yaml           | 58 ++++++++++++++++---
 1 file changed, 51 insertions(+), 7 deletions(-)
Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +24 -6
index 8680a0f86c5a..4a012d77513f 100644
@@ -9,12 +9,15 @@ title: Brcmstb PCIe Host Controller Device Tree Bindings
 maintainers:
   - Nicolas Saenz Julienne <[email protected]>
 
-allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
-
 properties:
   compatible:
-    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+    items:
+      - enum:
+          - brcm,bcm2711-pcie # The Raspberry Pi 4
+          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+          - brcm,bcm7278-pcie # Broadcom 7278 Arm
+          - brcm,bcm7216-pcie # Broadcom 7216 Arm
+          - brcm,bcm7445-pcie # Broadcom 7445 Arm
 
   reg:
     maxItems: 1
@@ -34,10 +37,12 @@ properties:
       - const: msi
 
   ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
 
   dma-ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 6
 
   clocks:
     maxItems: 1
@@ -58,8 +63,33 @@ properties:
 
   aspm-no-l0s: true
 
+  resets:
+    description: for "brcm,bcm7216-pcie", must be a valid reset
+      phandle pointing to the RESCAL reset controller provider node.
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  reset-names:
+    items:
+      - const: rescal
+
+  brcm,scb-sizes:
+    description: u64 giving the 64bit PCIe memory
+      viewport size of a memory controller.  There may be up to
+      three controllers, and each size must be a power of two

Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml properties: · line 88

Quoted 10 lines
Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +10 -0
+      with a size greater or equal to the amount of memory the
+      controller supports.  Note that each memory controller
+      may have two component regions -- base and extended -- so
+      this information cannot be deduced from the dma-ranges.
+
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint64-array
+      - items:
+          minItems: 1
+          maxItems: 3

This can be (dropping 'allOf'):

$ref: /schemas/types.yaml#/definitions/uint64-array
minItems: 1
maxItems: 3

With that,

#5 lore raw

PATCH v4 4/12 PCI: brcmstb: Add bcm7278 register info

In reply to Jim Quinlan

From: Jim Quinlan <[email protected]>

Add in compatibility strings and code for three Broadcom STB chips. Some of the register locations, shifts, and masks are different for certain chips, requiring the use of different constants based on of_id.

We would like to add the following at this time to the match list but we need to wait until the end of this patchset so that everything works.

    { .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
    { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
    { .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
    { .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
---
 drivers/pci/controller/pcie-brcmstb.c | 108 +++++++++++++++++++++++---
 1 file changed, 96 insertions(+), 12 deletions(-)
drivers/pci/controller/pcie-brcmstb.c +96 -12
index 73020b4ff090..7c707e483181 100644
@@ -120,9 +120,8 @@
 #define  PCIE_EXT_SLOT_SHIFT				15
 #define  PCIE_EXT_FUNC_SHIFT				12
 
-#define PCIE_RGR1_SW_INIT_1				0x9210
 #define  PCIE_RGR1_SW_INIT_1_PERST_MASK			0x1
-#define  PCIE_RGR1_SW_INIT_1_INIT_MASK			0x2
+#define  PCIE_RGR1_SW_INIT_1_PERST_SHIFT		0x0
 
 /* PCIe parameters */
 #define BRCM_NUM_PCIE_OUT_WINS		0x4
@@ -152,6 +151,76 @@
 #define SSC_STATUS_SSC_MASK		0x400
 #define SSC_STATUS_PLL_LOCK_MASK	0x800
 
+#define IDX_ADDR(pcie)	\
+	(pcie->reg_offsets[EXT_CFG_INDEX])
+#define DATA_ADDR(pcie)	\
+	(pcie->reg_offsets[EXT_CFG_DATA])
+#define PCIE_RGR1_SW_INIT_1(pcie) \
+	(pcie->reg_offsets[RGR1_SW_INIT_1])
+
+enum {
+	RGR1_SW_INIT_1,
+	EXT_CFG_INDEX,
+	EXT_CFG_DATA,
+};
+
+enum {
+	RGR1_SW_INIT_1_INIT_MASK,
+	RGR1_SW_INIT_1_INIT_SHIFT,
+};
+
+enum pcie_type {
+	GENERIC,
+	BCM7278,
+	BCM2711,
+};
+
+struct pcie_cfg_data {
+	const int *reg_field_info;
+	const int *offsets;
+	const enum pcie_type type;
+};
+
+static const int pcie_reg_field_info[] = {
+	[RGR1_SW_INIT_1_INIT_MASK] = 0x2,
+	[RGR1_SW_INIT_1_INIT_SHIFT] = 0x1,
+};
+
+static const int pcie_reg_field_info_bcm7278[] = {
+	[RGR1_SW_INIT_1_INIT_MASK] = 0x1,
+	[RGR1_SW_INIT_1_INIT_SHIFT] = 0x0,
+};
+
+static const int pcie_offsets[] = {
+	[RGR1_SW_INIT_1] = 0x9210,
+	[EXT_CFG_INDEX]  = 0x9000,
+	[EXT_CFG_DATA]   = 0x9004,
+};
+
+static const struct pcie_cfg_data generic_cfg = {
+	.reg_field_info	= pcie_reg_field_info,
+	.offsets	= pcie_offsets,
+	.type		= GENERIC,
+};
+
+static const int pcie_offset_bcm7278[] = {
+	[RGR1_SW_INIT_1] = 0xc010,
+	[EXT_CFG_INDEX] = 0x9000,
+	[EXT_CFG_DATA] = 0x9004,
+};
+
+static const struct pcie_cfg_data bcm7278_cfg = {
+	.reg_field_info = pcie_reg_field_info_bcm7278,
+	.offsets	= pcie_offset_bcm7278,
+	.type		= BCM7278,
+};
+
+static const struct pcie_cfg_data bcm2711_cfg = {
+	.reg_field_info	= pcie_reg_field_info,
+	.offsets	= pcie_offsets,
+	.type		= BCM2711,
+};
+
 struct brcm_msi {
 	struct device		*dev;
 	void __iomem		*base;
@@ -176,6 +245,9 @@ struct brcm_pcie {
 	int			gen;
 	u64			msi_target_addr;
 	struct brcm_msi		*msi;
+	const int		*reg_offsets;
+	const int		*reg_field_info;
+	enum pcie_type		type;
 };
 
 /*
@@ -602,20 +674,21 @@ static struct pci_ops brcm_pcie_ops = {
 
 static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, u32 val)
 {
-	u32 tmp;
+	u32 tmp, mask =  pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK];
+	u32 shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT];
 
-	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1);
-	u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_INIT_MASK);
-	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1);
+	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+	tmp = (tmp & ~mask) | ((val << shift) & mask);
+	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 }
 
 static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val)
 {
 	u32 tmp;
 
-	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1);
+	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 	u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
-	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1);
+	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 }
 
 static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
@@ -924,10 +997,16 @@ static int brcm_pcie_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id brcm_pcie_match[] = {
+	{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
+	{},
+};
+
 static int brcm_pcie_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node, *msi_np;
 	struct pci_host_bridge *bridge;
+	const struct pcie_cfg_data *data;
 	struct brcm_pcie *pcie;
 	struct pci_bus *child;
 	struct resource *res;
@@ -937,9 +1016,18 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	if (!bridge)
 		return -ENOMEM;
 
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data) {
+		pr_err("failed to look up compatible string\n");
+		return -EINVAL;
+	}
+
 	pcie = pci_host_bridge_priv(bridge);
 	pcie->dev = &pdev->dev;
 	pcie->np = np;
+	pcie->reg_offsets = data->offsets;
+	pcie->reg_field_info = data->reg_field_info;
+	pcie->type = data->type;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pcie->base = devm_ioremap_resource(&pdev->dev, res);
@@ -1005,10 +1093,6 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static const struct of_device_id brcm_pcie_match[] = {
-	{ .compatible = "brcm,bcm2711-pcie" },
-	{},
-};
 MODULE_DEVICE_TABLE(of, brcm_pcie_match);
 
 static struct platform_driver brcm_pcie_driver = {
Signature · 1 line
2.17.1
#6 lore raw

PATCH v4 5/12 PCI: brcmstb: Add suspend and resume pm_ops

In reply to Jim Quinlan

From: Jim Quinlan <[email protected]>

Broadcom Set-top (BrcmSTB) boards typically support S2, S3, and S5 suspend and resume. Now the PCIe driver may do so as well.

---
 drivers/pci/controller/pcie-brcmstb.c | 48 +++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)
drivers/pci/controller/pcie-brcmstb.c +48 -0
index 7c707e483181..69d49d675b4a 100644
@@ -979,6 +979,48 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
 	brcm_pcie_bridge_sw_init_set(pcie, 1);
 }
 
+static int brcm_pcie_suspend(struct device *dev)
+{
+	struct brcm_pcie *pcie = dev_get_drvdata(dev);
+
+	brcm_pcie_turn_off(pcie);
+	clk_disable_unprepare(pcie->clk);
+
+	return 0;
+}
+
+static int brcm_pcie_resume(struct device *dev)
+{
+	struct brcm_pcie *pcie = dev_get_drvdata(dev);
+	void __iomem *base;
+	u32 tmp;
+	int ret;
+
+	base = pcie->base;
+	clk_prepare_enable(pcie->clk);
+
+	/* Take bridge out of reset so we can access the SERDES reg */
+	brcm_pcie_bridge_sw_init_set(pcie, 0);
+
+	/* SERDES_IDDQ = 0 */
+	tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+	u32p_replace_bits(&tmp, 0,
+			  PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
+	writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+
+	/* wait for serdes to be stable */
+	udelay(100);
+
+	ret = brcm_pcie_setup(pcie);
+	if (ret)
+		return ret;
+
+	if (pcie->msi)
+		brcm_msi_set_regs(pcie->msi);
+
+	return 0;
+}
+
 static void __brcm_pcie_remove(struct brcm_pcie *pcie)
 {
 	brcm_msi_remove(pcie);
@@ -1095,12 +1137,18 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 
 MODULE_DEVICE_TABLE(of, brcm_pcie_match);
 
+static const struct dev_pm_ops brcm_pcie_pm_ops = {
+	.suspend_noirq = brcm_pcie_suspend,
+	.resume_noirq = brcm_pcie_resume,
+};
+
 static struct platform_driver brcm_pcie_driver = {
 	.probe = brcm_pcie_probe,
 	.remove = brcm_pcie_remove,
 	.driver = {
 		.name = "brcm-pcie",
 		.of_match_table = brcm_pcie_match,
+		.pm = &brcm_pcie_pm_ops,
 	},
 };
 module_platform_driver(brcm_pcie_driver);
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#8 lore raw

PATCH v4 6/12 PCI: brcmstb: Add bcm7278 PERST support

In reply to Jim Quinlan

From: Jim Quinlan <[email protected]>

The PERST bit was moved to a different register in 7278-type STB chips. In addition, the polarity of the bit was also changed; for other chips writing a 1 specified assert; for 7278-type chips, writing a 0 specifies assert.

Signal-wise, PERST is an asserted-low signal.

---
 drivers/pci/controller/pcie-brcmstb.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
drivers/pci/controller/pcie-brcmstb.c +12 -3
index 69d49d675b4a..532ea9c9cf89 100644
@@ -81,6 +81,7 @@
 
 #define PCIE_MISC_PCIE_CTRL				0x4064
 #define  PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK	0x1
+#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK		0x4
 
 #define PCIE_MISC_PCIE_STATUS				0x4068
 #define  PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK		0x80
@@ -686,9 +687,17 @@ static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val)
 {
 	u32 tmp;
 
-	tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
-	u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
-	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+	if (pcie->type == BCM7278) {
+		/* Perst bit has moved and assert value is 0 */
+		tmp = readl(pcie->base + PCIE_MISC_PCIE_CTRL);
+		u32p_replace_bits(&tmp,
+				  !val, PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK);
+		writel(tmp, pcie->base +  PCIE_MISC_PCIE_CTRL);
+	} else {
+		tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+		u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
+		writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+	}
 }
 
 static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
Signature · 1 line
2.17.1
#9 lore raw

PATCH v4 7/12 PCI: brcmstb: Add control of rescal reset

In reply to Jim Quinlan

From: Jim Quinlan <[email protected]>

Some STB chips have a special purpose reset controller named RESCAL (reset calibration). The PCIe HW can now control RESCAL to start and stop its operation.

---
 drivers/pci/controller/pcie-brcmstb.c | 84 ++++++++++++++++++++++++++-
 1 file changed, 82 insertions(+), 2 deletions(-)
drivers/pci/controller/pcie-brcmstb.c +82 -2
index 532ea9c9cf89..ca825d7ca4fc 100644
@@ -23,6 +23,7 @@
 #include <linux/of_platform.h>
 #include <linux/pci.h>
 #include <linux/printk.h>
+#include <linux/reset.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
 #include <linux/string.h>
@@ -152,7 +153,17 @@
 #define SSC_STATUS_SSC_MASK		0x400
 #define SSC_STATUS_PLL_LOCK_MASK	0x800
 
-#define IDX_ADDR(pcie)	\
+/* Rescal registers */
+#define PCIE_DVT_PMU_PCIE_PHY_CTRL				0xc700
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS			0x3
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK		0x4
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT	0x2
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK		0x2
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT		0x1
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK		0x1
+#define  PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT		0x0
+
+#define IDX_ADDR(pcie) \
 	(pcie->reg_offsets[EXT_CFG_INDEX])
 #define DATA_ADDR(pcie)	\
 	(pcie->reg_offsets[EXT_CFG_DATA])
@@ -249,6 +260,7 @@ struct brcm_pcie {
 	const int		*reg_offsets;
 	const int		*reg_field_info;
 	enum pcie_type		type;
+	struct reset_control	*rescal;
 };
 
 /*
@@ -964,6 +976,47 @@ static void brcm_pcie_enter_l23(struct brcm_pcie *pcie)
 		dev_err(pcie->dev, "failed to enter low-power link state\n");
 }
 
+static int brcm_phy_cntl(struct brcm_pcie *pcie, const int start)
+{
+	static const u32 shifts[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = {
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT,
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT,
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT,};
+	static const u32 masks[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = {
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK,
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK,
+		PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK,};
+	const int beg = start ? 0 : PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS - 1;
+	const int end = start ? PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS : -1;
+	u32 tmp, combined_mask = 0;
+	u32 val = !!start;
+	void __iomem *base = pcie->base;
+	int i;
+
+	for (i = beg; i != end; start ? i++ : i--) {
+		tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
+		tmp = (tmp & ~masks[i]) | ((val << shifts[i]) & masks[i]);
+		writel(tmp, base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
+		usleep_range(50, 200);
+		combined_mask |= masks[i];
+	}
+
+	tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
+	val = start ? combined_mask : 0;
+
+	return (tmp & combined_mask) == val ? 0 : -EIO;
+}
+
+static inline int brcm_phy_start(struct brcm_pcie *pcie)
+{
+	return pcie->rescal ? brcm_phy_cntl(pcie, 1) : 0;
+}
+
+static inline int brcm_phy_stop(struct brcm_pcie *pcie)
+{
+	return pcie->rescal ? brcm_phy_cntl(pcie, 0) : 0;
+}
+
 static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
 {
 	void __iomem *base = pcie->base;
@@ -991,11 +1044,15 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
 static int brcm_pcie_suspend(struct device *dev)
 {
 	struct brcm_pcie *pcie = dev_get_drvdata(dev);
+	int ret;
 
 	brcm_pcie_turn_off(pcie);
+	ret = brcm_phy_stop(pcie);
+	if (ret)
+		dev_err(pcie->dev, "failed to stop phy\n");
 	clk_disable_unprepare(pcie->clk);
 
-	return 0;
+	return ret;
 }
 
 static int brcm_pcie_resume(struct device *dev)
@@ -1008,6 +1065,12 @@ static int brcm_pcie_resume(struct device *dev)
 	base = pcie->base;
 	clk_prepare_enable(pcie->clk);
 
+	ret = brcm_phy_start(pcie);
+	if (ret) {
+		dev_err(pcie->dev, "failed to start phy\n");
+		return ret;
+	}
+
 	/* Take bridge out of reset so we can access the SERDES reg */
 	brcm_pcie_bridge_sw_init_set(pcie, 0);
 
@@ -1034,6 +1097,9 @@ static void __brcm_pcie_remove(struct brcm_pcie *pcie)
 {
 	brcm_msi_remove(pcie);
 	brcm_pcie_turn_off(pcie);
+	if (brcm_phy_stop(pcie))
+		dev_err(pcie->dev, "failed to stop phy\n");
+	reset_control_assert(pcie->rescal);
 	clk_disable_unprepare(pcie->clk);
 }
 
@@ -1104,6 +1170,20 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "could not enable clock\n");
 		return ret;
 	}
+	pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev,
+							      "rescal");
+	if (IS_ERR(pcie->rescal))
+		return PTR_ERR(pcie->rescal);
+
+	ret = reset_control_deassert(pcie->rescal);
+	if (ret)
+		dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
+
+	ret = brcm_phy_start(pcie);
+	if (ret) {
+		dev_err(pcie->dev, "failed to start phy\n");
+		return ret;
+	}
 
 	ret = brcm_pcie_setup(pcie);
 	if (ret)
Signature · 1 line
2.17.1
#10 lore raw

PATCH v4 8/12 device core: Introduce multiple dma pfn offsets

In reply to Jim Quinlan

The new field in struct device 'dma_pfn_offset_map' is used to facilitate the use of single or multiple pfn offsets between cpu addrs and dma addrs. It subsumes the role of dev->dma_pfn_offset -- a uniform offset.

The function of_dma_get_range() has been modified to take two additional
arguments: the "map", which is an array that holds the information regarding the pfn offset regions, and map_size, which is the size in bytes of the map array.

of_dma_configure() is the typical manner to set pfn offsets but there are a number of ad hoc assignments to dev->dma_pfn_offset in the kernel driver code. These cases now invoke the function dma_attach_uniform_pfn_offset(dev, pfn_offset).

---
 arch/arm/include/asm/dma-mapping.h            |  9 +--
 arch/arm/mach-keystone/keystone.c             |  9 ++-
 arch/sh/drivers/pci/pcie-sh7786.c             |  3 +-
 arch/sh/kernel/dma-coherent.c                 | 14 ++--
 arch/x86/pci/sta2x11-fixup.c                  |  7 +-
 drivers/acpi/arm64/iort.c                     |  5 +-
 drivers/gpu/drm/sun4i/sun4i_backend.c         |  5 +-
 drivers/iommu/io-pgtable-arm.c                |  2 +-
 .../platform/sunxi/sun4i-csi/sun4i_csi.c      |  5 +-
 .../platform/sunxi/sun6i-csi/sun6i_csi.c      |  4 +-
 drivers/of/address.c                          | 72 ++++++++++++++++---
 drivers/of/device.c                           | 19 +++--
 drivers/of/of_private.h                       | 11 +--
 drivers/of/unittest.c                         |  8 ++-
 drivers/remoteproc/remoteproc_core.c          |  2 +-
 .../staging/media/sunxi/cedrus/cedrus_hw.c    |  7 +-
 drivers/usb/core/message.c                    |  4 +-
 drivers/usb/core/usb.c                        |  2 +-
 include/linux/device.h                        |  4 +-
 include/linux/dma-direct.h                    | 16 ++++-
 include/linux/dma-mapping.h                   | 38 ++++++++++
 kernel/dma/coherent.c                         | 11 +--
 kernel/dma/mapping.c                          | 38 ++++++++++
 23 files changed, 235 insertions(+), 60 deletions(-)
arch/arm/include/asm/dma-mapping.h +5 -4
index bdd80ddbca34..f1e72f99468b 100644
@@ -35,8 +35,9 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 #ifndef __arch_pfn_to_dma
 static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
 {
-	if (dev)
-		pfn -= dev->dma_pfn_offset;
+	if (dev && dev->dma_pfn_offset_map)
+		pfn -= dma_pfn_offset_from_phys_addr(dev, PFN_PHYS(pfn));
+
 	return (dma_addr_t)__pfn_to_bus(pfn);
 }
 
@@ -44,8 +45,8 @@ static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
 {
 	unsigned long pfn = __bus_to_pfn(addr);
 
-	if (dev)
-		pfn += dev->dma_pfn_offset;
+	if (dev && dev->dma_pfn_offset_map)
+		pfn += dma_pfn_offset_from_dma_addr(dev, addr);
 
 	return pfn;
 }
arch/arm/mach-keystone/keystone.c +6 -3
index 638808c4e122..dfb095b31534 100644
@@ -8,6 +8,7 @@
  */
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
@@ -38,9 +39,11 @@ static int keystone_platform_notifier(struct notifier_block *nb,
 		return NOTIFY_BAD;
 
 	if (!dev->of_node) {
-		dev->dma_pfn_offset = keystone_dma_pfn_offset;
-		dev_err(dev, "set dma_pfn_offset%08lx\n",
-			dev->dma_pfn_offset);
+		int ret = dma_attach_uniform_pfn_offset
+				(dev, keystone_dma_pfn_offset);
+
+		dev_err(dev, "set dma_pfn_offset%08lx%s\n",
+			dev->dma_pfn_offset, ret ? " failed" : "");
 	}
 	return NOTIFY_OK;
 }
arch/sh/drivers/pci/pcie-sh7786.c +2 -1
index e0b568aaa701..3e63c6b6e070 100644
@@ -12,6 +12,7 @@
 #include <linux/io.h>
 #include <linux/async.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
 #include <linux/sh_clk.h>
@@ -487,7 +488,7 @@ int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 
 void pcibios_bus_add_device(struct pci_dev *pdev)
 {
-	pdev->dev.dma_pfn_offset = dma_pfn_offset;
+	dma_attach_uniform_pfn_offset(&pdev->dev, dma_pfn_offset);
 }
 
 static int __init sh7786_pcie_core_init(void)
arch/sh/kernel/dma-coherent.c +8 -6
index d4811691b93c..f4a092e74910 100644
@@ -14,6 +14,7 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 {
 	void *ret, *ret_nocache;
 	int order = get_order(size);
+	phys_addr_t phys;
 
 	gfp |= __GFP_ZERO;
 
@@ -34,11 +35,12 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		return NULL;
 	}
 
-	split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order);
+	phys = virt_to_phys(ret);
+	split_page(pfn_to_page(PFN_DOWN(phys)), order);
 
-	*dma_handle = virt_to_phys(ret);
-	if (!WARN_ON(!dev))
-		*dma_handle -= PFN_PHYS(dev->dma_pfn_offset);
+	*dma_handle = (dma_addr_t)phys;
+	if (!WARN_ON(!dev) && dev->dma_pfn_offset_map)
+		*dma_handle -= PFN_PHYS(dma_pfn_offset_from_phys_addr(dev, phys));
 
 	return ret_nocache;
 }
@@ -50,8 +52,8 @@ void arch_dma_free(struct device *dev, size_t size, void *vaddr,
 	unsigned long pfn = (dma_handle >> PAGE_SHIFT);
 	int k;
 
-	if (!WARN_ON(!dev))
-		pfn += dev->dma_pfn_offset;
+	if (!WARN_ON(!dev) && dev->dma_pfn_offset_map)
+		pfn += dma_pfn_offset_from_dma_addr(dev, dma_handle);
 
 	for (k = 0; k < (1 << order); k++)
 		__free_pages(pfn_to_page(pfn + k), 0);
arch/x86/pci/sta2x11-fixup.c +5 -2
index c313d784efab..7815af63f870 100644
@@ -12,6 +12,7 @@
 #include <linux/export.h>
 #include <linux/list.h>
 #include <linux/dma-direct.h>
+#include <linux/dma-mapping.h>
 #include <asm/iommu.h>
 
 #define STA2X11_SWIOTLB_SIZE (4*1024*1024)
@@ -133,7 +134,7 @@ static void sta2x11_map_ep(struct pci_dev *pdev)
 	struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev);
 	struct device *dev = &pdev->dev;
 	u32 amba_base, max_amba_addr;
-	int i;
+	int i, ret;
 
 	if (!instance)
 		return;
@@ -141,7 +142,9 @@ static void sta2x11_map_ep(struct pci_dev *pdev)
 	pci_read_config_dword(pdev, AHB_BASE(0), &amba_base);
 	max_amba_addr = amba_base + STA2X11_AMBA_SIZE - 1;
 
-	dev->dma_pfn_offset = PFN_DOWN(-amba_base);
+	ret = dma_attach_uniform_pfn_offset(dev, PFN_DOWN(-amba_base));
+	if (ret)
+		dev_err(dev, "sta2x11: could not set PFN offset\n");
 
 	dev->bus_dma_limit = max_amba_addr;
 	pci_set_consistent_dma_mask(pdev, max_amba_addr);
drivers/acpi/arm64/iort.c +3 -2
index 28a6b387e80e..56ab8b6ece77 100644
@@ -1142,8 +1142,9 @@ void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
 	*dma_addr = dmaaddr;
 	*dma_size = size;
 
-	dev->dma_pfn_offset = PFN_DOWN(offset);
-	dev_dbg(dev, "dma_pfn_offset(%#08llx)\n", offset);
+	ret = dma_attach_uniform_pfn_offset(dev, PFN_DOWN(offset));
+	dev_dbg(dev, "dma_pfn_offset(%#08llx)%s\n",
+		offset, ret ? " failed!" : "");
 }
 
 static void __init acpi_iort_register_irq(int hwirq, const char *name,
drivers/gpu/drm/sun4i/sun4i_backend.c +4 -1
index 072ea113e6be..772e6cc74be8 100644
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_graph.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
@@ -812,7 +813,9 @@ static int sun4i_backend_bind(struct device *dev, struct device *master,
 		 * on our device since the RAM mapping is at 0 for the DMA bus,
 		 * unlike the CPU.
 		 */
-		drm->dev->dma_pfn_offset = PHYS_PFN_OFFSET;
+		ret = dma_attach_uniform_pfn_offset(dev, PHYS_PFN_OFFSET);
+		if (ret)
+			return ret;
 	}
 
 	backend->engine.node = dev->of_node;
drivers/iommu/io-pgtable-arm.c +1 -1
index 04fbd4bf0ff9..e9cc1c2d47cd 100644
@@ -754,7 +754,7 @@ arm_lpae_alloc_pgtable(struct io_pgtable_cfg *cfg)
 	if (cfg->oas > ARM_LPAE_MAX_ADDR_BITS)
 		return NULL;
 
-	if (!selftest_running && cfg->iommu_dev->dma_pfn_offset) {
+	if (!selftest_running && cfg->iommu_dev->dma_pfn_offset_map) {
 		dev_err(cfg->iommu_dev, "Cannot accommodate DMA offset for IOMMU page tables\n");
 		return NULL;
 	}
drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c +4 -1
index eff34ded6305..d0d337ab9f1b 100644
@@ -7,6 +7,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -183,7 +184,9 @@ static int sun4i_csi_probe(struct platform_device *pdev)
 			return ret;
 	} else {
 #ifdef PHYS_PFN_OFFSET
-		csi->dev->dma_pfn_offset = PHYS_PFN_OFFSET;
+		ret = dma_attach_uniform_pfn_offset(dev, PHYS_PFN_OFFSET);
+		if (ret)
+			return ret;
 #endif
 	}
 
drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c +3 -1
index 055eb0b8e396..e91cc511f625 100644
@@ -898,7 +898,9 @@ static int sun6i_csi_probe(struct platform_device *pdev)
 
 	sdev->dev = &pdev->dev;
 	/* The DMA bus has the memory mapped at 0 */
-	sdev->dev->dma_pfn_offset = PHYS_OFFSET >> PAGE_SHIFT;
+	ret = dma_attach_uniform_pfn_offset(sdev->dev, PFN_DOWN(PHYS_OFFSET));
+	if (ret)
+		return ret;
 
 	ret = sun6i_csi_resource_request(sdev, pdev);
 	if (ret)
drivers/of/address.c +61 -11

117 lines not on this page · raw message

drivers/of/device.c +12 -7
index 27203bfd0b22..1501d92589b8 100644
@@ -91,11 +91,12 @@ int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma)
 	u64 dma_addr, paddr, size = 0;
 	int ret;
 	bool coherent;
-	unsigned long offset;
 	const struct iommu_ops *iommu;
 	u64 mask, end;
+	size_t map_size;
+	struct bus_dma_region *map;
 
-	ret = of_dma_get_range(np, &dma_addr, &paddr, &size);
+	ret = of_dma_get_range(np, &dma_addr, &paddr, &size, &map, &map_size);
 	if (ret < 0) {
 		/*
 		 * For legacy reasons, we have to assume some devices need
@@ -105,9 +106,16 @@ int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma)
 		if (!force_dma)
 			return ret == -ENODEV ? 0 : ret;
 
-		dma_addr = offset = 0;
+		dma_addr = 0;
 	} else {
-		offset = PFN_DOWN(paddr - dma_addr);
+		if (map) {
+			/* We want the offset map to be device-managed */
+			dev->dma_pfn_offset_map = devm_kzalloc(dev, map_size, GFP_KERNEL);
+			if (!dev->dma_pfn_offset_map)
+				return -ENOMEM;
+			memcpy(dev->dma_pfn_offset_map, map, map_size);
+			kfree(map);
+		}
 
 		/*
 		 * Add a work around to treat the size as mask + 1 in case
@@ -123,7 +131,6 @@ int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma)
 			dev_err(dev, "Adjusted size 0x%llx invalid\n", size);
 			return -EINVAL;
 		}
-		dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
 	}
 
 	/*
@@ -142,8 +149,6 @@ int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma)
 	else if (!size)
 		size = 1ULL << 32;
 
-	dev->dma_pfn_offset = offset;
-
 	/*
 	 * Limit coherent and dma mask based on size and default mask
 	 * set by the driver.
drivers/of/of_private.h +7 -4
index edc682249c00..63bb7b0e94aa 100644
@@ -157,12 +157,15 @@ extern void __of_sysfs_remove_bin_file(struct device_node *np,
 extern int of_bus_n_addr_cells(struct device_node *np);
 extern int of_bus_n_size_cells(struct device_node *np);
 
+struct bus_dma_region;
 #ifdef CONFIG_OF_ADDRESS
-extern int of_dma_get_range(struct device_node *np, u64 *dma_addr,
-			    u64 *paddr, u64 *size);
+extern int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr,
+			    u64 *size, struct bus_dma_region **map,
+			    size_t *map_size);
 #else
-static inline int of_dma_get_range(struct device_node *np, u64 *dma_addr,
-				   u64 *paddr, u64 *size)
+static inline int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr,
+				   u64 *size, struct bus_dma_region **map,
+				   size_t *map_size)
 {
 	return -ENODEV;
 }
drivers/of/unittest.c +6 -2
index 398de04fd19c..33fa3947951f 100644
@@ -873,6 +873,8 @@ static void __init of_unittest_dma_ranges_one(const char *path,
 {
 	struct device_node *np;
 	u64 dma_addr, paddr, size;
+	size_t map_size;
+	struct bus_dma_region *map = NULL;
 	int rc;
 
 	np = of_find_node_by_path(path);
@@ -881,7 +883,7 @@ static void __init of_unittest_dma_ranges_one(const char *path,
 		return;
 	}
 
-	rc = of_dma_get_range(np, &dma_addr, &paddr, &size);
+	rc = of_dma_get_range(np, &dma_addr, &paddr, &size, &map, &map_size);
 
 	unittest(!rc, "of_dma_get_range failed on node %pOF rc=%i\n", np, rc);
 	if (!rc) {
@@ -891,6 +893,7 @@ static void __init of_unittest_dma_ranges_one(const char *path,
 			 "of_dma_get_range wrong phys addr (%llx) on node %pOF", paddr, np);
 		unittest(dma_addr == expect_dma_addr,
 			 "of_dma_get_range wrong DMA addr (%llx) on node %pOF", dma_addr, np);
+		kfree(map);
 	}
 	of_node_put(np);
 }
@@ -901,8 +904,9 @@ static void __init of_unittest_parse_dma_ranges(void)
 		0x0, 0x20000000, 0x40000000);
 	of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000",
 		0x10000000, 0x20000000, 0x40000000);
+	/* This one has two ranges in the dma-range property */
 	of_unittest_dma_ranges_one("/testcase-data/address-tests/pci@90000000",
-		0x80000000, 0x20000000, 0x10000000);
+		0x80000000, 0x20000000, 0x50000000);
 }
 
 static void __init of_unittest_pci_dma_ranges(void)
drivers/remoteproc/remoteproc_core.c +1 -1
index e12a54e67588..e49648f77261 100644
@@ -518,7 +518,7 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc,
 	/* Initialise vdev subdevice */
 	snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
 	rvdev->dev.parent = rproc->dev.parent;
-	rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset;
+	rvdev->dev.dma_pfn_offset_map = rproc->dev.parent->dma_pfn_offset_map;
 	rvdev->dev.release = rproc_rvdev_release;
 	dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
 	dev_set_drvdata(&rvdev->dev, rvdev);
drivers/staging/media/sunxi/cedrus/cedrus_hw.c +5 -2
index daf5f244f93b..b27130c16a8b 100644
@@ -171,8 +171,11 @@ int cedrus_hw_probe(struct cedrus_dev *dev)
 	 */
 
 #ifdef PHYS_PFN_OFFSET
-	if (!(variant->quirks & CEDRUS_QUIRK_NO_DMA_OFFSET))
-		dev->dev->dma_pfn_offset = PHYS_PFN_OFFSET;
+	if (!(variant->quirks & CEDRUS_QUIRK_NO_DMA_OFFSET)) {
+		ret = dma_attach_uniform_pfn_offset(dev->dev, PHYS_PFN_OFFSET);
+		if (ret)
+			return ret;
+	}
 #endif
 
 	ret = of_reserved_mem_device_init(dev->dev);
drivers/usb/core/message.c +2 -2
index 6197938dcc2d..071856000428 100644
@@ -1956,10 +1956,10 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 		intf->dev.groups = usb_interface_groups;
 		/*
 		 * Please refer to usb_alloc_dev() to see why we set
-		 * dma_mask and dma_pfn_offset.
+		 * dma_mask and dma_pfn_offset_map.
 		 */
 		intf->dev.dma_mask = dev->dev.dma_mask;
-		intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset;
+		intf->dev.dma_pfn_offset_map = dev->dev.dma_pfn_offset_map;
 		INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
 		intf->minor = -1;
 		device_initialize(&intf->dev);
drivers/usb/core/usb.c +1 -1
index f16c26dc079d..3fbc0c06ce9c 100644
@@ -611,7 +611,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	 * mask for the entire HCD, so don't do that.
 	 */
 	dev->dev.dma_mask = bus->sysdev->dma_mask;
-	dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset;
+	dev->dev.dma_pfn_offset_map = bus->sysdev->dma_pfn_offset_map;
 	set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
 	dev->state = USB_STATE_ATTACHED;
 	dev->lpm_disable_count = 1;
include/linux/device.h +2 -2
index ac8e37cd716a..b1e7e776c245 100644
@@ -492,7 +492,7 @@ struct dev_links_info {
  * 		such descriptors.
  * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller
  *		DMA limit than the device itself supports.
- * @dma_pfn_offset: offset of DMA memory range relatively of RAM
+ * @dma_pfn_offset_map: offset map for DMA memory range relatively of RAM
  * @dma_parms:	A low level driver may set these to teach IOMMU code about
  * 		segment limitations.
  * @dma_pools:	Dma pools (if dma'ble device).
@@ -577,7 +577,7 @@ struct device {
 					     64 bit addresses for consistent
 					     allocations such descriptors. */
 	u64		bus_dma_limit;	/* upstream dma constraint */
-	unsigned long	dma_pfn_offset;
+	struct bus_dma_region *dma_pfn_offset_map;
 
 	struct device_dma_parameters *dma_parms;
 
include/linux/dma-direct.h +14 -2
index 24b8684aa21d..0f4db61a4e3f 100644
@@ -15,14 +15,26 @@ static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	dma_addr_t dev_addr = (dma_addr_t)paddr;
 
-	return dev_addr - ((dma_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
+	if (dev->dma_pfn_offset_map) {
+		unsigned long dma_pfn_offset
+			= dma_pfn_offset_from_phys_addr(dev, paddr);
+
+		dev_addr -= PFN_PHYS((dma_addr_t)dma_pfn_offset);
+	}
+	return dev_addr;
 }
 
 static inline phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dev_addr)
 {
 	phys_addr_t paddr = (phys_addr_t)dev_addr;
 
-	return paddr + ((phys_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
+	if (dev->dma_pfn_offset_map) {
+		unsigned long dma_pfn_offset
+			= dma_pfn_offset_from_dma_addr(dev, dev_addr);
+
+		paddr += PFN_PHYS((phys_addr_t)dma_pfn_offset);
+	}
+	return paddr;
 }
 #endif /* !CONFIG_ARCH_HAS_PHYS_TO_DMA */
 
include/linux/dma-mapping.h +38 -0
index 330ad58fbf4d..ce0c1c418054 100644
@@ -256,6 +256,39 @@ static inline void dma_direct_sync_sg_for_cpu(struct device *dev,
 size_t dma_direct_max_mapping_size(struct device *dev);
 
 #ifdef CONFIG_HAS_DMA
+struct bus_dma_region {
+	phys_addr_t	cpu_start;
+	phys_addr_t	cpu_end;
+	dma_addr_t	dma_start;
+	dma_addr_t	dma_end;
+	unsigned long	pfn_offset;
+};
+
+int dma_attach_uniform_pfn_offset(struct device *dev,
+				  unsigned long dma_pfn_offset);
+
+static inline unsigned long dma_pfn_offset_from_dma_addr(struct device *dev,
+							 dma_addr_t dma_addr)
+{
+	const struct bus_dma_region *m = dev->dma_pfn_offset_map;
+
+	for (; m->cpu_end; m++)
+		if (dma_addr >= m->dma_start && dma_addr <= m->dma_end)
+			return m->pfn_offset;
+	return 0;
+}
+
+static inline unsigned long dma_pfn_offset_from_phys_addr(struct device *dev,
+							  phys_addr_t paddr)
+{
+	const struct bus_dma_region *m = dev->dma_pfn_offset_map;
+
+	for (; m->cpu_end; m++)
+		if (paddr >= m->cpu_start && paddr <= m->cpu_end)
+			return m->pfn_offset;
+	return 0;
+}
+
 #include <asm/dma-mapping.h>
 
 static inline const struct dma_map_ops *get_dma_ops(struct device *dev)
@@ -463,6 +496,11 @@ u64 dma_get_required_mask(struct device *dev);
 size_t dma_max_mapping_size(struct device *dev);
 unsigned long dma_get_merge_boundary(struct device *dev);
 #else /* CONFIG_HAS_DMA */
+static inline int dma_attach_uniform_pfn_offset(struct device *dev,
+						unsigned long dma_pfn_offset)
+{
+	return -EIO;
+}
 static inline dma_addr_t dma_map_page_attrs(struct device *dev,
 		struct page *page, size_t offset, size_t size,
 		enum dma_data_direction dir, unsigned long attrs)
kernel/dma/coherent.c +7 -4
index 2a0c4985f38e..689849a77067 100644
@@ -31,10 +31,13 @@ static inline struct dma_coherent_mem *dev_get_coherent_memory(struct device *de
 static inline dma_addr_t dma_get_device_base(struct device *dev,
 					     struct dma_coherent_mem * mem)
 {
-	if (mem->use_dev_dma_pfn_offset)
-		return (mem->pfn_base - dev->dma_pfn_offset) << PAGE_SHIFT;
-	else
-		return mem->device_base;
+	if (mem->use_dev_dma_pfn_offset && dev->dma_pfn_offset_map) {
+		unsigned long dma_pfn_offset = dma_pfn_offset_from_phys_addr
+			(dev, PFN_PHYS(mem->pfn_base));
+
+		return (dma_addr_t)PFN_PHYS(mem->pfn_base - dma_pfn_offset);
+	}
+	return mem->device_base;
 }
 
 static int dma_init_coherent_memory(phys_addr_t phys_addr,
kernel/dma/mapping.c +38 -0
index 98e3d873792e..073cfdac48c8 100644
@@ -407,3 +407,41 @@ unsigned long dma_get_merge_boundary(struct device *dev)
 	return ops->get_merge_boundary(dev);
 }
 EXPORT_SYMBOL_GPL(dma_get_merge_boundary);
+
+/**
+ * dma_attach_uniform_pfn_offset - Assign scalar offset for all addresses.
+ * @dev:	device pointer; needed to "own" the alloced memory.
+ * @pfn_offset:	offset to apply when converting from phys addr
+ *		to dma addr and vice versa.
+ *
+ * This is for the simple case of a uniform offset which requires
+ * no bounds calculations for its use.  It is the equivalent the role
+ * of the former dev->dma_pfn_offset; ie it is just blindly added
+ * or subtracted in all cases.
+ *
+ * It returns -ENOMEM if out of memory, -ENODEV if dev == NULL, otherwise 0.
+ */
+int dma_attach_uniform_pfn_offset(struct device *dev, unsigned long pfn_offset)
+{
+	struct bus_dma_region *map;
+
+	if (!dev)
+		return -ENODEV;
+
+	if (!pfn_offset)
+		return 0;
+
+	map = devm_kcalloc(dev, 2, sizeof(*map), GFP_KERNEL);
+	if (!map)
+		return -ENOMEM;
+
+	map->pfn_offset = pfn_offset;
+	map->cpu_start = 0;
+	map->cpu_end = ~(phys_addr_t)0;
+	map->dma_start = 0;
+	map->dma_end = ~(dma_addr_t)0;
+	dev->dma_pfn_offset_map = map;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dma_attach_uniform_pfn_offset);
Signature · 6 lines
2.17.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
#11 lore raw

Re: [PATCH v4 08/12] device core: Introduce multiple dma pfn offsets

Quoted 13 lines · Jim Quinlan

The new field in struct device 'dma_pfn_offset_map' is used to facilitate the use of single or multiple pfn offsets between cpu addrs and dma addrs. It subsumes the role of dev->dma_pfn_offset -- a uniform offset.

The function of_dma_get_range() has been modified to take two additional
arguments: the "map", which is an array that holds the information regarding the pfn offset regions, and map_size, which is the size in bytes of the map array.

of_dma_configure() is the typical manner to set pfn offsets but there are a number of ad hoc assignments to dev->dma_pfn_offset in the kernel driver code. These cases now invoke the function dma_attach_uniform_pfn_offset(dev, pfn_offset).

...

arch/arm/mach-keystone/keystone.c static int keystone_platform_notifier(struct notifier_block *nb, · line 43

Quoted 2 lines
arch/arm/mach-keystone/keystone.c +2 -0
+		int ret = dma_attach_uniform_pfn_offset
+				(dev, keystone_dma_pfn_offset);

It's strange indentation. Have you configured your editor correctly? Seems to me as fit on one line.

Quoted 2 lines
arch/arm/mach-keystone/keystone.c +2 -0
+		dev_err(dev, "set dma_pfn_offset%08lx%s\n",
+			dev->dma_pfn_offset, ret ? " failed" : "");

...

drivers/of/address.c void __iomem *of_io_request_and_map(struct device_node *np, int index, · line 929

Quoted 2 lines
drivers/of/address.c +2 -0
+	*map_size = (num_ranges + 1) * sizeof(**map);
+	r = kzalloc(*map_size, GFP_KERNEL);

kcalloc()

Quoted 2 lines
drivers/of/address.c +2 -0
+	if (!r)
+		return -ENOMEM;

...

drivers/of/address.c void __iomem *of_io_request_and_map(struct device_node *np, int index, · line 947

Quoted 2 lines
drivers/of/address.c +2 -0
+		r->pfn_offset = PFN_DOWN(range.cpu_addr)
+			- PFN_DOWN(range.bus_addr);

Ditto (indentation).

...

include/linux/dma-direct.h static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) · line 20

Quoted 2 lines
include/linux/dma-direct.h +2 -0
+		unsigned long dma_pfn_offset
+			= dma_pfn_offset_from_phys_addr(dev, paddr);

Ditto.

...

Review

Quoted 2 lines
(quoted diff) +2 -0
+		unsigned long dma_pfn_offset
+			= dma_pfn_offset_from_dma_addr(dev, dev_addr);

Ditto.

Check entire your series for a such, please!

Signature · 8 lines
With Best Regards,
Andy Shevchenko


_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
#12 lore raw

Re: [PATCH v4 08/12] device core: Introduce multiple dma pfn offsets

Hi Andy,

Quoted 16 lines · Andy Shevchenko
Quoted 9 lines · Jim Quinlan

The new field in struct device 'dma_pfn_offset_map' is used to facilitate the use of single or multiple pfn offsets between cpu addrs and dma addrs. It subsumes the role of dev->dma_pfn_offset -- a uniform offset.

The function of_dma_get_range() has been modified to take two additional
arguments: the "map", which is an array that holds the information regarding the pfn offset regions, and map_size, which is the size in bytes of the map array.

Quoted 4 lines

of_dma_configure() is the typical manner to set pfn offsets but there are a number of ad hoc assignments to dev->dma_pfn_offset in the kernel driver code. These cases now invoke the function dma_attach_uniform_pfn_offset(dev, pfn_offset).

Quoted 7 lines

...

arch/arm/mach-keystone/keystone.c static int keystone_platform_notifier(struct notifier_block *nb, · line 43

Quoted 2 lines
arch/arm/mach-keystone/keystone.c +2 -0
+             int ret = dma_attach_uniform_pfn_offset
+                             (dev, keystone_dma_pfn_offset);

It's strange indentation. Have you configured your editor correctly? Seems to me as fit on one line.

I'm using emacs with the c-style set to linux. I may have some custom tweaks; I'll check into it. But I think I can fix most of your objections by using the max_line_length of 100.

Quoted 10 lines
Quoted 3 lines
arch/arm/mach-keystone/keystone.c +2 -0
+             dev_err(dev, "set dma_pfn_offset%08lx%s\n",
+                     dev->dma_pfn_offset, ret ? " failed" : "");

...

drivers/of/address.c void __iomem *of_io_request_and_map(struct device_node *np, int index, · line 929

Quoted 2 lines
drivers/of/address.c +2 -0
+     *map_size = (num_ranges + 1) * sizeof(**map);
+     r = kzalloc(*map_size, GFP_KERNEL);

kcalloc()

Since I have to calculate the size anyway I thought kzalloc was fine. I'll switch.

Quoted 19 lines
Quoted 3 lines
drivers/of/address.c +2 -0
+     if (!r)
+             return -ENOMEM;

...

drivers/of/address.c void __iomem *of_io_request_and_map(struct device_node *np, int index, · line 947

Quoted 2 lines
drivers/of/address.c +2 -0
+             r->pfn_offset = PFN_DOWN(range.cpu_addr)
+                     - PFN_DOWN(range.bus_addr);

Ditto (indentation).

...

include/linux/dma-direct.h static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) · line 20

Quoted 2 lines
include/linux/dma-direct.h +2 -0
+             unsigned long dma_pfn_offset
+                     = dma_pfn_offset_from_phys_addr(dev, paddr);

Ditto.

Quoted 8 lines

...

Review

Quoted 2 lines
(quoted diff) +2 -0
+             unsigned long dma_pfn_offset
+                     = dma_pfn_offset_from_dma_addr(dev, dev_addr);

Ditto.

Check entire your series for a such, please!

Will do,
Thanks
Jim Quinlan

Quoted 6 lines

--
With Best Regards,
Andy Shevchenko

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu

#13 lore raw

Re: [PATCH v4 08/12] device core: Introduce multiple dma pfn offsets

Quoted 3 lines · Jim Quinlan
Quoted 1 line · Andy Shevchenko

On Fri, Jun 05, 2020 at 05:26:48PM -0400, Jim Quinlan wrote:

...

Quoted 6 lines
Quoted 4 lines

drivers/of/address.c void __iomem *of_io_request_and_map(struct device_node *np, int index, · line 929

Quoted 2 lines
drivers/of/address.c +2 -0
+     *map_size = (num_ranges + 1) * sizeof(**map);
+     r = kzalloc(*map_size, GFP_KERNEL);

kcalloc()

Since I have to calculate the size anyway I thought kzalloc was fine. I'll switch.

The point is to check multiplication overflow. See overflow.h for helpers.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
drivers/of/address.c +2 -0
+     if (!r)
+             return -ENOMEM;
Signature · 8 lines
With Best Regards,
Andy Shevchenko


_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
#14 lore raw

Re: [PATCH v4 08/12] device core: Introduce multiple dma pfn offsets

Hi Andy,

Quoted 8 lines · Andy Shevchenko
Quoted 3 lines · Jim Quinlan
Quoted 1 line · Andy Shevchenko

On Fri, Jun 05, 2020 at 05:26:48PM -0400, Jim Quinlan wrote:

...

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

drivers/of/address.c void __iomem *of_io_request_and_map(struct device_node *np, int index, · line 929

Quoted 2 lines
drivers/of/address.c +2 -0
+     *map_size = (num_ranges + 1) * sizeof(**map);
+     r = kzalloc(*map_size, GFP_KERNEL);

kcalloc()

Since I have to calculate the size anyway I thought kzalloc was fine. I'll switch.

The point is to check multiplication overflow. See overflow.h for helpers.

I am aware of this check and didn't think of it as applicable here, as the most dma-ranges I can envision is six. I suppose that it is possible that this may change in the future to some big number. At any rate, the next version has kcalloc().

Regards,
Jim

Quoted 10 lines
Quoted 4 lines
Quoted 4 lines

drivers/of/address.c void __iomem *of_io_request_and_map(struct device_node *np, int index, · line 931

Quoted 4 lines
drivers/of/address.c +2 -0
+     if (!r)
+             return -ENOMEM;

--
With Best Regards,
Andy Shevchenko

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu

#15 lore raw

PATCH v4 9/12 PCI: brcmstb: Set internal memory viewport sizes

In reply to Jim Quinlan

BrcmSTB PCIe controllers are intimately connected to the memory controller(s) on the SOC. There is a "viewport" for each memory controller that allows inbound accesses to CPU memory. Each viewport's size must be set to a power of two, and that size must be equal to or larger than the amount of memory each controller supports.

---
 drivers/pci/controller/pcie-brcmstb.c | 67 ++++++++++++++++++++-------
 1 file changed, 49 insertions(+), 18 deletions(-)
drivers/pci/controller/pcie-brcmstb.c +49 -18
index ca825d7ca4fc..71e5d4326a79 100644
@@ -55,6 +55,8 @@
 #define  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK	0x300000
 #define  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128		0x0
 #define  PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK		0xf8000000
+#define  PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK		0x07c00000
+#define  PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK		0x0000001f
 
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO		0x400c
 #define PCIE_MEM_WIN0_LO(win)	\
@@ -152,6 +154,7 @@
 #define SSC_STATUS_OFFSET		0x1
 #define SSC_STATUS_SSC_MASK		0x400
 #define SSC_STATUS_PLL_LOCK_MASK	0x800
+#define PCIE_BRCM_MAX_MEMC		3
 
 /* Rescal registers */
 #define PCIE_DVT_PMU_PCIE_PHY_CTRL				0xc700
@@ -261,6 +264,8 @@ struct brcm_pcie {
 	const int		*reg_field_info;
 	enum pcie_type		type;
 	struct reset_control	*rescal;
+	int			num_memc;
+	u64			memc_size[PCIE_BRCM_MAX_MEMC];
 };
 
 /*
@@ -717,22 +722,40 @@ static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
 							u64 *rc_bar2_offset)
 {
 	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
-	struct device *dev = pcie->dev;
 	struct resource_entry *entry;
+	struct device *dev = pcie->dev;
+	u64 lowest_pcie_addr = ~(u64)0;
+	int ret, i = 0;
+	u64 size = 0;
 
-	entry = resource_list_first_type(&bridge->dma_ranges, IORESOURCE_MEM);
-	if (!entry)
-		return -ENODEV;
+	resource_list_for_each_entry(entry, &bridge->dma_ranges) {
+		u64 pcie_beg = entry->res->start - entry->offset;
 
+		size += entry->res->end - entry->res->start + 1;
+		if (pcie_beg < lowest_pcie_addr)
+			lowest_pcie_addr = pcie_beg;
+	}
 
-	/*
-	 * The controller expects the inbound window offset to be calculated as
-	 * the difference between PCIe's address space and CPU's. The offset
-	 * provided by the firmware is calculated the opposite way, so we
-	 * negate it.
-	 */
-	*rc_bar2_offset = -entry->offset;
-	*rc_bar2_size = 1ULL << fls64(entry->res->end - entry->res->start);
+	ret = of_property_read_variable_u64_array(
+		pcie->np, "brcm,scb-sizes", pcie->memc_size, 1,
+		PCIE_BRCM_MAX_MEMC);
+
+	if (ret <= 0) {
+		/* Make an educated guess */
+		pcie->num_memc = 1;
+		pcie->memc_size[0] = 1 << fls64(size - 1);
+	} else {
+		pcie->num_memc = ret;
+	}
+
+	/* Each memc is viewed through a "port" that is a power of 2 */
+	for (i = 0, size = 0; i < pcie->num_memc; i++)
+		size += pcie->memc_size[i];
+
+	/* System memory starts at this address in PCIe-space */
+	*rc_bar2_offset = lowest_pcie_addr;
+	/* The sum of all memc views must also be a power of 2 */
+	*rc_bar2_size = 1ULL << fls64(size - 1);
 
 	/*
 	 * We validate the inbound memory view even though we should trust
@@ -784,12 +807,11 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	void __iomem *base = pcie->base;
 	struct device *dev = pcie->dev;
 	struct resource_entry *entry;
-	unsigned int scb_size_val;
 	bool ssc_good = false;
 	struct resource *res;
 	int num_out_wins = 0;
 	u16 nlw, cls, lnksta;
-	int i, ret;
+	int i, ret, memc;
 	u32 tmp, aspm_support;
 
 	/* Reset the bridge */
@@ -825,11 +847,20 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	writel(upper_32_bits(rc_bar2_offset),
 	       base + PCIE_MISC_RC_BAR2_CONFIG_HI);
 
-	scb_size_val = rc_bar2_size ?
-		       ilog2(rc_bar2_size) - 15 : 0xf; /* 0xf is 1GB */
 	tmp = readl(base + PCIE_MISC_MISC_CTRL);
-	u32p_replace_bits(&tmp, scb_size_val,
-			  PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK);
+	for (memc = 0; memc < pcie->num_memc; memc++) {
+		u32 scb_size_val = ilog2(pcie->memc_size[memc]) - 15;
+
+		if (memc == 0)
+			u32p_replace_bits(&tmp, scb_size_val,
+					  PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK);
+		else if (memc == 1)
+			u32p_replace_bits(&tmp, scb_size_val,
+					  PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK);
+		else if (memc == 2)
+			u32p_replace_bits(&tmp, scb_size_val,
+					  PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK);
+	}
 	writel(tmp, base + PCIE_MISC_MISC_CTRL);
 
 	/*
Signature · 1 line
2.17.1
#16 lore raw

PATCH v4 10/12 PCI: brcmstb: Accommodate MSI for older chips

In reply to Jim Quinlan

From: Jim Quinlan <[email protected]>

Older BrcmSTB chips do not have a separate register for MSI interrupts; the MSIs are in a register that also contains unrelated interrupts. In addition, the interrupts lie in bits [31..24] for these legacy chips. This commit provides common code for both legacy and non-legacy MSI interrupt registers.

---
 drivers/pci/controller/pcie-brcmstb.c | 72 +++++++++++++++++++--------
 1 file changed, 52 insertions(+), 20 deletions(-)
drivers/pci/controller/pcie-brcmstb.c +52 -20
index 71e5d4326a79..0e92d322f581 100644
@@ -80,7 +80,8 @@
 #define PCIE_MISC_MSI_BAR_CONFIG_HI			0x4048
 
 #define PCIE_MISC_MSI_DATA_CONFIG			0x404c
-#define  PCIE_MISC_MSI_DATA_CONFIG_VAL			0xffe06540
+#define  PCIE_MISC_MSI_DATA_CONFIG_VAL_32		0xffe06540
+#define  PCIE_MISC_MSI_DATA_CONFIG_VAL_8		0xfff86540
 
 #define PCIE_MISC_PCIE_CTRL				0x4064
 #define  PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK	0x1
@@ -92,6 +93,9 @@
 #define  PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK	0x10
 #define  PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK	0x40
 
+#define PCIE_MISC_REVISION				0x406c
+#define  BRCM_PCIE_HW_REV_33				0x0303
+
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT		0x4070
 #define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK	0xfff00000
 #define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK	0xfff0
@@ -112,10 +116,14 @@
 #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK	0x2
 #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK		0x08000000
 
-#define PCIE_MSI_INTR2_STATUS				0x4500
-#define PCIE_MSI_INTR2_CLR				0x4508
-#define PCIE_MSI_INTR2_MASK_SET				0x4510
-#define PCIE_MSI_INTR2_MASK_CLR				0x4514
+
+#define PCIE_INTR2_CPU_BASE		0x4300
+#define PCIE_MSI_INTR2_BASE		0x4500
+/* Offsets from PCIE_INTR2_CPU_BASE and PCIE_MSI_INTR2_BASE */
+#define  MSI_INT_STATUS			0x0
+#define  MSI_INT_CLR			0x8
+#define  MSI_INT_MASK_SET		0x10
+#define  MSI_INT_MASK_CLR		0x14
 
 #define PCIE_EXT_CFG_DATA				0x8000
 
@@ -130,6 +138,8 @@
 /* PCIe parameters */
 #define BRCM_NUM_PCIE_OUT_WINS		0x4
 #define BRCM_INT_PCI_MSI_NR		32
+#define BRCM_INT_PCI_MSI_LEGACY_NR	8
+#define BRCM_INT_PCI_MSI_SHIFT		0
 
 /* MSI target adresses */
 #define BRCM_MSI_TARGET_ADDR_LT_4GB	0x0fffffffcULL
@@ -247,6 +257,12 @@ struct brcm_msi {
 	int			irq;
 	/* used indicates which MSI interrupts have been alloc'd */
 	unsigned long		used;
+	bool			legacy;
+	/* Some chips have MSIs in bits [31..24] of a shared register. */
+	int			legacy_shift;
+	int			nr; /* No. of MSI available, depends on chip */
+	/* This is the base pointer for interrupt status/set/clr regs */
+	void __iomem		*intr_base;
 };
 
 /* Internal PCIe Host Controller Information.*/
@@ -266,6 +282,7 @@ struct brcm_pcie {
 	struct reset_control	*rescal;
 	int			num_memc;
 	u64			memc_size[PCIE_BRCM_MAX_MEMC];
+	u32			hw_rev;
 };
 
 /*
@@ -456,8 +473,10 @@ static void brcm_pcie_msi_isr(struct irq_desc *desc)
 	msi = irq_desc_get_handler_data(desc);
 	dev = msi->dev;
 
-	status = readl(msi->base + PCIE_MSI_INTR2_STATUS);
-	for_each_set_bit(bit, &status, BRCM_INT_PCI_MSI_NR) {
+	status = readl(msi->intr_base + MSI_INT_STATUS);
+	status >>= msi->legacy_shift;
+
+	for_each_set_bit(bit, &status, msi->nr) {
 		virq = irq_find_mapping(msi->inner_domain, bit);
 		if (virq)
 			generic_handle_irq(virq);
@@ -474,7 +493,7 @@ static void brcm_msi_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 
 	msg->address_lo = lower_32_bits(msi->target_addr);
 	msg->address_hi = upper_32_bits(msi->target_addr);
-	msg->data = (0xffff & PCIE_MISC_MSI_DATA_CONFIG_VAL) | data->hwirq;
+	msg->data = (0xffff & PCIE_MISC_MSI_DATA_CONFIG_VAL_32) | data->hwirq;
 }
 
 static int brcm_msi_set_affinity(struct irq_data *irq_data,
@@ -486,8 +505,9 @@ static int brcm_msi_set_affinity(struct irq_data *irq_data,
 static void brcm_msi_ack_irq(struct irq_data *data)
 {
 	struct brcm_msi *msi = irq_data_get_irq_chip_data(data);
+	const int shift_amt = data->hwirq + msi->legacy_shift;
 
-	writel(1 << data->hwirq, msi->base + PCIE_MSI_INTR2_CLR);
+	writel(1 << shift_amt, msi->intr_base + MSI_INT_CLR);
 }
 
 
@@ -503,7 +523,7 @@ static int brcm_msi_alloc(struct brcm_msi *msi)
 	int hwirq;
 
 	mutex_lock(&msi->lock);
-	hwirq = bitmap_find_free_region(&msi->used, BRCM_INT_PCI_MSI_NR, 0);
+	hwirq = bitmap_find_free_region(&msi->used, msi->nr, 0);
 	mutex_unlock(&msi->lock);
 
 	return hwirq;
@@ -552,7 +572,7 @@ static int brcm_allocate_domains(struct brcm_msi *msi)
 	struct fwnode_handle *fwnode = of_node_to_fwnode(msi->np);
 	struct device *dev = msi->dev;
 
-	msi->inner_domain = irq_domain_add_linear(NULL, BRCM_INT_PCI_MSI_NR,
+	msi->inner_domain = irq_domain_add_linear(NULL, msi->nr,
 						  &msi_domain_ops, msi);
 	if (!msi->inner_domain) {
 		dev_err(dev, "failed to create IRQ domain\n");
@@ -590,7 +610,10 @@ static void brcm_msi_remove(struct brcm_pcie *pcie)
 
 static void brcm_msi_set_regs(struct brcm_msi *msi)
 {
-	writel(0xffffffff, msi->base + PCIE_MSI_INTR2_MASK_CLR);
+	u32 val = __GENMASK(31, msi->legacy_shift);
+
+	writel(val, msi->intr_base + MSI_INT_MASK_CLR);
+	writel(val, msi->intr_base + MSI_INT_CLR);
 
 	/*
 	 * The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI
@@ -601,8 +624,10 @@ static void brcm_msi_set_regs(struct brcm_msi *msi)
 	writel(upper_32_bits(msi->target_addr),
 	       msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI);
 
-	writel(PCIE_MISC_MSI_DATA_CONFIG_VAL,
-	       msi->base + PCIE_MISC_MSI_DATA_CONFIG);
+	val = msi->legacy ? PCIE_MISC_MSI_DATA_CONFIG_VAL_8 :
+		PCIE_MISC_MSI_DATA_CONFIG_VAL_32;
+
+	writel(val, msi->base + PCIE_MISC_MSI_DATA_CONFIG);
 }
 
 static int brcm_pcie_enable_msi(struct brcm_pcie *pcie)
@@ -627,6 +652,17 @@ static int brcm_pcie_enable_msi(struct brcm_pcie *pcie)
 	msi->np = pcie->np;
 	msi->target_addr = pcie->msi_target_addr;
 	msi->irq = irq;
+	msi->legacy = pcie->hw_rev < BRCM_PCIE_HW_REV_33;
+
+	if (msi->legacy) {
+		msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE;
+		msi->nr = BRCM_INT_PCI_MSI_LEGACY_NR;
+		msi->legacy_shift = 24;
+	} else {
+		msi->intr_base = msi->base + PCIE_MSI_INTR2_BASE;
+		msi->nr = BRCM_INT_PCI_MSI_NR;
+		msi->legacy_shift = 0;
+	}
 
 	ret = brcm_allocate_domains(msi);
 	if (ret)
@@ -885,12 +921,6 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	tmp &= ~PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK;
 	writel(tmp, base + PCIE_MISC_RC_BAR3_CONFIG_LO);
 
-	/* Mask all interrupts since we are not handling any yet */
-	writel(0xffffffff, pcie->base + PCIE_MSI_INTR2_MASK_SET);
-
-	/* clear any interrupts we find on boot */
-	writel(0xffffffff, pcie->base + PCIE_MSI_INTR2_CLR);
-
 	if (pcie->gen)
 		brcm_pcie_set_gen(pcie, pcie->gen);
 
@@ -1220,6 +1250,8 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		goto fail;
 
+	pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
+
 	msi_np = of_parse_phandle(pcie->np, "msi-parent", 0);
 	if (pci_msi_enabled() && msi_np == pcie->np) {
 		ret = brcm_pcie_enable_msi(pcie);
Signature · 1 line
2.17.1
#17 lore raw

PATCH v4 11/12 PCI: brcmstb: Set bus max burst size by chip type

In reply to Jim Quinlan

From: Jim Quinlan <[email protected]>

The proper value of the parameter SCB_MAX_BURST_SIZE varies per chip. The 2711 family requires 128B whereas other devices can employ 512. The assignment is complicated by the fact that the values for this two-bit field have different meanings;

Value Type_Generic Type_7278

     00       Reserved         128B
     01           128B         256B
     10           256B         512B

11 512B Reserved

---
 drivers/pci/controller/pcie-brcmstb.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
drivers/pci/controller/pcie-brcmstb.c +15 -3
index 0e92d322f581..7d068cec1ae2 100644
@@ -53,7 +53,7 @@
 #define  PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK		0x1000
 #define  PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK	0x2000
 #define  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK	0x300000
-#define  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128		0x0
+
 #define  PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK		0xf8000000
 #define  PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK		0x07c00000
 #define  PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK		0x0000001f
@@ -848,7 +848,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	int num_out_wins = 0;
 	u16 nlw, cls, lnksta;
 	int i, ret, memc;
-	u32 tmp, aspm_support;
+	u32 tmp, burst, aspm_support;
 
 	/* Reset the bridge */
 	brcm_pcie_bridge_sw_init_set(pcie, 1);
@@ -864,10 +864,22 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	/* Wait for SerDes to be stable */
 	usleep_range(100, 200);
 
+	/*
+	 * SCB_MAX_BURST_SIZE is a two bit field.  For GENERIC chips it
+	 * is encoded as 0=128, 1=256, 2=512, 3=Rsvd, for BCM7278 it
+	 * is encoded as 0=Rsvd, 1=128, 2=256, 3=512.
+	 */
+	if (pcie->type == BCM2711)
+		burst = 0x0; /* 128B */
+	else if (pcie->type == BCM7278)
+		burst = 0x3; /* 512 bytes */
+	else
+		burst = 0x2; /* 512 bytes */
+
 	/* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */
 	u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK);
 	u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK);
-	u32p_replace_bits(&tmp, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128,
+	u32p_replace_bits(&tmp, burst,
 			  PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK);
 	writel(tmp, base + PCIE_MISC_MISC_CTRL);
 
Signature · 1 line
2.17.1
#18 lore raw

PATCH v4 12/12 PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list

In reply to Jim Quinlan

Now that the support is in place with previous commits, we add several chips that use the BrcmSTB driver.

---
 drivers/pci/controller/pcie-brcmstb.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/pci/controller/pcie-brcmstb.c +4 -0
index 7d068cec1ae2..0002752c4d74 100644
@@ -1189,6 +1189,10 @@ static int brcm_pcie_remove(struct platform_device *pdev)
 
 static const struct of_device_id brcm_pcie_match[] = {
 	{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
+	{ .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
+	{ .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
+	{ .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
+	{ .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
 	{},
 };
 
Signature · 1 line
2.17.1