Skip to contentSkip to conversation

package/dbusbroker: new package

PATCH New Norbert Lange 2 participants 3 messages Jun 5, 2020 – Jun 6, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 package/dbusbroker: new package

Add dbus-broker, which is a drop-in replacement
for the dbus-daemon.

Its possible to use this package standalone (without the dbus package - if buildroot's systemd would not depend on dbus). This is sufficient to provide systemd's (d)bus functionality. To allow standalone usage, the necessary config files are copied and adopted over from dbus.

---
 DEVELOPERS                         |   1 +
 package/Config.in                  |   1 +
 package/dbusbroker/Config.in       |  23 ++++++
 package/dbusbroker/dbus.socket     |   5 ++
 package/dbusbroker/dbusbroker.hash |   3 +
 package/dbusbroker/dbusbroker.mk   |  45 +++++++++++
 package/dbusbroker/session.conf    |  65 ++++++++++++++++
 package/dbusbroker/system.conf     | 120 +++++++++++++++++++++++++++++
 8 files changed, 263 insertions(+)
 create mode 100644 package/dbusbroker/Config.in
 create mode 100644 package/dbusbroker/dbus.socket
 create mode 100644 package/dbusbroker/dbusbroker.hash
 create mode 100644 package/dbusbroker/dbusbroker.mk
 create mode 100644 package/dbusbroker/session.conf
 create mode 100644 package/dbusbroker/system.conf
DEVELOPERS +1 -0
index e3ac8aa06a..e4451ea9c3 100644
@@ -1883,6 +1883,7 @@ F:	package/tpm-tools/
 F:	package/trousers/
 
 N:	Norbert Lange <[email protected]>
+F:	package/dbusbroker/
 F:	package/tcf-agent/
 
 N:	Nylon Chen <[email protected]>
package/Config.in +1 -0
index 520e5d5570..0c8cc8381d 100644
@@ -436,6 +436,7 @@ endmenu
 	source "package/dbus-glib/Config.in"
 	source "package/dbus-python/Config.in"
 	source "package/dbus-triggerd/Config.in"
+	source "package/dbusbroker/Config.in"
 	source "package/dfu-util/Config.in"
 	source "package/dmidecode/Config.in"
 	source "package/dmraid/Config.in"
package/dbusbroker/Config.in new file +23 -0
new file mode 100644
index 0000000000..aa628b4d5b
@@ -0,0 +1,23 @@
+config BR2_PACKAGE_DBUSBROKER
+	bool "dbusbroker"
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	depends on BR2_USE_MMU
+	depends on BR2_INIT_SYSTEMD
+	select BR2_PACKAGE_EXPAT
+	select BR2_PACKAGE_SYSTEMD
+	help
+	  Linux D-Bus Message Broker.
+
+	  The dbus-broker project is an implementation of a message bus as defined
+	  by the D-Bus specification. Its aim is to provide high performance and
+	  reliability, while keeping compatibility to the D-Bus reference
+	  implementation.
+
+	  It is exclusively written for Linux systems, and makes use of many modern
+	  features provided by recent linux kernel releases.
+
+	  https://github.com/bus1/dbus-broker/wiki
+
+comment "dbusbroker needs a toolchain w/ threads"
+	depends on BR2_USE_MMU
+	depends on !BR2_TOOLCHAIN_HAS_THREADS
package/dbusbroker/dbus.socket new file +5 -0
new file mode 100644
index 0000000000..5c373cf450
@@ -0,0 +1,5 @@
+[Unit]
+Description=D-Bus System Message Bus Socket
+
+[Socket]
+ListenStream=/run/dbus/system_bus_socket
package/dbusbroker/dbusbroker.hash new file +3 -0
new file mode 100644
index 0000000000..4eefe63725
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256	95adfde56bce898c3b69eee0524732365e802348dd8189a35d5d00c30990dc81	dbus-broker-23.tar.xz
+sha256	3cda3630283eda0eab825abe5ac84d191248c6b3fe1c232a118124959b96c6a4	LICENSE
package/dbusbroker/dbusbroker.mk new file +45 -0

45 lines not on this page · raw message

package/dbusbroker/session.conf new file +65 -0

65 lines not on this page · raw message

package/dbusbroker/system.conf new file +120 -0

120 lines not on this page · raw message

Signature · 1 line
2.26.2
#1 lore raw

PATCH 1/1 package/dbusbroker: new package

Norbert, All,

On 2020-06-06 01:10 +0200, Norbert Lange spake thusly:

Quoted 2 lines

Add dbus-broker, which is a drop-in replacement
for the dbus-daemon.

So, is it possible to have both dbus and dbus-broker in the same system? It sould seem so, as far as I can see: one or the other can serve as the system bus daemon. As for the session, each user may opt for running one or the other, it seems.

However, dbus-broker does not provide libdbus. So packages that wqant to link with libdbus will still need to select the origian dbus package.

Quoted 5 lines

Its possible to use this package standalone (without the dbus package - if buildroot's systemd would not depend on dbus). This is sufficient to provide systemd's (d)bus functionality. To allow standalone usage, the necessary config files are copied and adopted over from dbus.

Sorry, but this explanation does not make sense to me...

So you mean you;d like to be able to uses sytemd with dbus-broker rather than with the original dbus? In that case, you can change systemd' Config.in to something like:

select BR2_PACKAGE_DBUS if !BR2_PACKAGE_DBUS_BROKER # runtime

... in a followup patch

Also, the part about the config files should probably bne a separate paragraph, otherwise it gets confusing...

[--SNIP--]

package/dbusbroker/Config.in line 2

Quoted 8 lines
package/dbusbroker/Config.in new file +2 -0
new file mode 100644
index 0000000000..aa628b4d5b
@@ -0,0 +1,23 @@
+config BR2_PACKAGE_DBUSBROKER
+	bool "dbusbroker"

The name as defined upstream is dbus-borker, so this is what we should be using too:

package/dbus-broker/
BR2_PACKAGE_DBUS_BROKER

package/dbusbroker/Config.in line 4

Quoted 2 lines
package/dbusbroker/Config.in new file +2 -0
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	depends on BR2_USE_MMU

Dependency on MMU should be first.

package/dbusbroker/Config.in line 7

Quoted 3 lines
package/dbusbroker/Config.in new file +3 -0
+	depends on BR2_INIT_SYSTEMD
+	select BR2_PACKAGE_EXPAT
+	select BR2_PACKAGE_SYSTEMD

No, you can't select BR2_PACKAGE_SYSTEMD.

For one, it is forcibly enabled by BR2_INIT_SYSTEMD, so as you depend on it, you areguaranteed it is availbe.

However, systemd does not look like it is a mandatory dependency of dbus-broker. Indeed, systemd is only needed for the launcher, which is optional.

So you should drop the depenency on BR2_INIT_SYSTEMD, and you must drop the select on BR2_PACKAGE_SYSTEMD.

[--SNIP--]

package/dbusbroker/dbusbroker.hash line 3

Quoted 9 lines
package/dbusbroker/dbusbroker.hash new file +3 -0
new file mode 100644
index 0000000000..4eefe63725
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256	95adfde56bce898c3b69eee0524732365e802348dd8189a35d5d00c30990dc81	dbus-broker-23.tar.xz
+sha256	3cda3630283eda0eab825abe5ac84d191248c6b3fe1c232a118124959b96c6a4	LICENSE

The convention is to use two spaces to spearate the fields now.

Quoted 16 lines
package/dbusbroker/dbusbroker.mk new file +10 -0
new file mode 100644
index 0000000000..71d13e5ebe
@@ -0,0 +1,45 @@
+################################################################################
+#
+# dbusbroker
+#
+# Launching services is delegated to systemd so there is very little else
+# needed. No separate user is necessary and no helper for launching.
+#
+# Service + Config files were copied over from dbus,
+# uneeded / unecessary entries removed for clarity.
+#

package/dbusbroker/dbusbroker.mk line 20

Quoted 10 lines
package/dbusbroker/dbusbroker.mk new file +10 -0
+################################################################################
+
+DBUSBROKER_VERSION = 23
+DBUSBROKER_SOURCE = dbus-broker-$(DBUSBROKER_VERSION).tar.xz
+DBUSBROKER_SITE = https://github.com/bus1/dbus-broker/releases/download/v$(DBUSBROKER_VERSION)
+
+DBUSBROKER_LICENSE = Apache-2.0
+DBUSBROKER_LICENSE_FILES = LICENSE
+# Compatibility Launcher requires this
+DBUSBROKER_DEPENDENCIES += expat systemd

Do not use += on the first assignment of DEPENDENCIES (unless said first assignment is in a conditional block).

However, systemd is not a mandatory requirement; it is only needed for the launcher.

So:

    # BR2_COREUTILS_HOST_DEPENDENCY to be able to use ln --relative
    ifeq ($(BR2_PACKAGE_SYSTEMD),y)
    DBUS_BROKER_DEPENDENCIES += $(BR2_COREUTILS_HOST_DEPENDENCY) expat systemd
    DBUS_BROKER_CONF_OPTS += -Dlauncher=true
    else
    DBUS_BROKER_CONF_OPTS += -Dlauncher=false
    endif

    # Do not install units for system bus daemon if original dbus present
    ifeq ($(BR2_PACKAGE_DBUS),) 
    define DBUS_BROKER_INSTALL_INIT_SYSTEMD
        $(INSTALL) -D -m644 $(DBUSBROKER_PKGDIR)/dbus.socket \
            $(TARGET_DIR)/usr/lib/systemd/system/dbus.socket
        $(HOST_MAKE_ENV) ln -sf --relative \
            $(TARGET_DIR)/usr/lib/systemd/system/dbus.socket \
            $(TARGET_DIR)/usr/lib/systemd/system/sockets.target.wants/dbus.socket
    endef
    endif

But you also need to provide startup script for the non-systemd case:

    # Do not install startup script for system bus daemon if original dbus present
    ifeq ($(BR2_PACKAGE_DBUS),)
    define DBUS_BROKER_INSTALL_INIT_SYSV
        $(INSTALL) -D -m 0755 $(DBUSBROKER_PKGDIR)/S30dbus-broker \
            $(TARGET_DIR)/etc/init.d/S30dbus-broker
    endef
    endif

(use your imagination to come up with a good startup script; use package/busybox/S01syslogd as reference.)

package/dbusbroker/dbusbroker.mk line 23

Quoted 2 lines
package/dbusbroker/dbusbroker.mk new file +2 -0
+ifeq ($(BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_17),y)
+DBUSBROKER_CONF_OPTS += -Dlinux-4-17=true

We want to explicitly disable that otherwise:

    else
    DBUSBROKER_CONF_OPTS += -Dlinux-4-17=false
    endif

package/dbusbroker/dbusbroker.mk line 35

Quoted 12 lines
package/dbusbroker/dbusbroker.mk new file +12 -0
+endif
+
+ifeq ($(BR2_PACKAGE_LIBSELINUX),y)
+DBUSBROKER_DEPENDENCIES += libselinux
+DBUSBROKER_CONF_OPTS += -Dselinux=true
+else
+DBUSBROKER_CONF_OPTS += -Dselinux=false
+endif
+
+# Only install config and service files if dbus is not available
+ifeq ($(BR2_PACKAGE_DBUS),)
+define DBUSBROKER_INSTALL_TARGET_POST

This macro name is not explict. What about:
DBUS_BROKER_INSTALL_CONFIG_FILES

package/dbusbroker/dbusbroker.mk line 37

Quoted 2 lines
package/dbusbroker/dbusbroker.mk new file +2 -0
+	$(INSTALL) -D -m644 $(DBUSBROKER_PKGDIR)/dbus.socket $(TARGET_DIR)/usr/lib/systemd/system/dbus.socket
+	ln -sf ../dbus.socket $(TARGET_DIR)/usr/lib/systemd/system/sockets.target.wants/dbus.socket

The systemd-related files should only be installed if systemd is enabled (see above).

package/dbusbroker/dbusbroker.mk line 39

Quoted 2 lines
package/dbusbroker/dbusbroker.mk new file +2 -0
+	$(INSTALL) -D -m644 $(DBUSBROKER_PKGDIR)/session.conf $(TARGET_DIR)/usr/share/dbus-1/session.conf
+	$(INSTALL) -D -m644 $(DBUSBROKER_PKGDIR)/system.conf $(TARGET_DIR)/usr/share/dbus-1/system.conf

Split lines that are too long.

Also, even if the original dbus is enabled (e.g. as the system bus, but one uses dbus-broker as session bus), one may still need those files on the target.

So we may want to unconditionally install both of them as:

    $(TARGET_DIR)/usr/share/dbus-1/system-broker.conf
    $(TARGET_DIR)/usr/share/dbus-1/session-broker.conf

... and when the origian dbus is not enabled, then we symlink those two to be the default ones.

package/dbusbroker/dbusbroker.mk line 43

Quoted 4 lines
package/dbusbroker/dbusbroker.mk new file +4 -0
+endef
+
+DBUSBROKER_POST_INSTALL_TARGET_HOOKS += DBUSBROKER_INSTALL_TARGET_POST
+endif

I think we also need a user to run the system daemon, like is done with the original dbus:

define DBUS_BROKER_USERS
dbus-broker -1 dbus-broker -1 * /var/run/dbus-broker - - dbus-broker messagebus user
endef

package/dbusbroker/session.conf

Quoted 7 lines
package/dbusbroker/dbusbroker.mk new file +1 -0
+$(eval $(meson-package))
package/dbusbroker/session.conf new file +0 -0
new file mode 100644
index 0000000000..e4758fa218
@@ -0,0 +1,65 @@

[--SNIP--]

I would like that we have a very simple, basic session config file, that does not filter anything for the owning user, and does not allow any other user to connect.

People who need more complex configurations will have to provide their own session config file.

Quoted 11 lines
package/dbusbroker/system.conf new file +5 -0
new file mode 100644
index 0000000000..a1e8df7367
@@ -0,0 +1,120 @@
+<!-- This configuration file controls the systemwide message bus.
+     Add a system-local.conf and edit that rather than changing this
+     file directly. -->
+
+<!-- Note that there are any number of ways you can hose yourself

package/dbusbroker/system.conf line 15

Quoted 10 lines
package/dbusbroker/system.conf new file +10 -0
+     security-wise by screwing up this file; in particular, you
+     probably don't want to listen on any more addresses, add any more
+     auth mechanisms, run as a different user, etc. -->
+
+<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-Bus Bus Configuration 1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
+<busconfig>
+
+  <!-- Our well-known bus type, do not change this -->
+  <type>system</type>

And we should use the 'dbus-broker' user:

      <!-- Run as special user -->
      <user>dbus-broker</user>

package/dbusbroker/system.conf line 18

Quoted 2 lines
package/dbusbroker/system.conf new file +2 -0
+  <!-- Fork into daemon mode -->
+  <fork/>

With systemd, isn't this playing badly with systemd's monitoring of processes? I.e. this implies setting forking=tru in the unit for this dameon, while systemd is usually very capable and spawning dameons in the background.

Quoted 108 lines
package/dbusbroker/system.conf new file +101 -0
+  <!-- We use system service launching using a helper -->
+  <standard_system_servicedirs/>
+
+  <!-- Enable logging to syslog -->
+  <syslog/>
+
+  <policy context="default">
+    <!-- All users can connect to system bus -->
+    <allow user="*"/>
+
+    <!-- Holes must be punched in service configuration files for
+         name ownership and sending method calls -->
+    <deny own="*"/>
+    <deny send_type="method_call"/>
+
+    <!-- Signals and reply messages (method returns, errors) are allowed
+         by default -->
+    <allow send_type="signal"/>
+    <allow send_requested_reply="true" send_type="method_return"/>
+    <allow send_requested_reply="true" send_type="error"/>
+
+    <!-- All messages may be received by default -->
+    <allow receive_type="method_call"/>
+    <allow receive_type="method_return"/>
+    <allow receive_type="error"/>
+    <allow receive_type="signal"/>
+
+    <!-- Allow anyone to talk to the message bus -->
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.DBus" />
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.DBus.Introspectable"/>
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.DBus.Properties"/>
+    <!-- But disallow some specific bus services -->
+    <deny send_destination="org.freedesktop.DBus"
+          send_interface="org.freedesktop.DBus"
+          send_member="UpdateActivationEnvironment"/>
+    <deny send_destination="org.freedesktop.DBus"
+          send_interface="org.freedesktop.DBus.Debug.Stats"/>
+    <deny send_destination="org.freedesktop.DBus"
+          send_interface="org.freedesktop.systemd1.Activator"/>
+  </policy>
+
+  <!-- Only systemd, which runs as root, may report activation failures. -->
+  <policy user="root">
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.systemd1.Activator"/>
+  </policy>
+
+  <!-- root may monitor the system bus. -->
+  <policy user="root">
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.DBus.Monitoring"/>
+  </policy>
+
+  <!-- If the Stats interface was enabled@compile-time, root may use it.
+       Copy this into system.local.conf or system.d/*.conf if you want to
+       enable other privileged users to view statistics and debug info -->
+  <policy user="root">
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.DBus.Debug.Stats"/>
+  </policy>
+
+
+  <!-- The defaults for these limits are hard-coded in dbus-daemon.
+       Some clarifications:
+       Times are in milliseconds (ms); 1000ms = 1 second
+       133169152 bytes = 127 MiB
+       33554432 bytes = 32 MiB
+       150000ms = 2.5 minutes -->
+  <!-- <limit name="max_incoming_bytes">133169152</limit> -->
+  <!-- <limit name="max_incoming_unix_fds">64</limit> -->
+  <!-- <limit name="max_outgoing_bytes">133169152</limit> -->
+  <!-- <limit name="max_outgoing_unix_fds">64</limit> -->
+  <!-- <limit name="max_message_size">33554432</limit> -->
+  <!-- <limit name="max_message_unix_fds">16</limit> -->
+  <!-- <limit name="service_start_timeout">25000</limit> -->
+  <!-- <limit name="auth_timeout">5000</limit> -->
+  <!-- <limit name="pending_fd_timeout">150000</limit> -->
+  <!-- <limit name="max_completed_connections">2048</limit> -->
+  <!-- <limit name="max_incomplete_connections">64</limit> -->
+  <!-- <limit name="max_connections_per_user">256</limit> -->
+  <!-- <limit name="max_pending_service_starts">512</limit> -->
+  <!-- <limit name="max_names_per_connection">512</limit> -->
+  <!-- <limit name="max_match_rules_per_connection">512</limit> -->
+  <!-- <limit name="max_replies_per_connection">128</limit> -->
+
+  <!-- Config files are placed here that among other things, punch
+       holes in the above policy for specific services. -->
+  <includedir>system.d</includedir>
+
+  <includedir>/etc/dbus-1/system.d</includedir>
+
+  <!-- This is included last so local configuration can override what's
+       in this standard file -->
+  <include ignore_missing="yes">/etc/dbus-1/system-local.conf</include>
+
+  <include if_selinux_enabled="yes" selinux_root_relative="yes">contexts/dbus_contexts</include>
+
+</busconfig>
Signature · 6 lines
2.26.2

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#2 lore raw

PATCH 1/1 package/dbusbroker: new package

Am So., 7. Juni 2020 um 00:20 Uhr schrieb Yann E. MORIN <[email protected]>:

Quoted 11 lines

Norbert, All,

On 2020-06-06 01:10 +0200, Norbert Lange spake thusly:

Quoted 2 lines

Add dbus-broker, which is a drop-in replacement
for the dbus-daemon.

So, is it possible to have both dbus and dbus-broker in the same system? It sould seem so, as far as I can see: one or the other can serve as the system bus daemon. As for the session, each user may opt for running one or the other, it seems.

It's co-installable, but only one daemon can be active. dbus-broker is dependent on systemd, and the service has a conflict with the reference dbus service. means only one will be active

Quoted 3 lines

However, dbus-broker does not provide libdbus. So packages that wqant to link with libdbus will still need to select the origian dbus package.

True, it can only replace the daemon. For a package that directly implements the dbus connection like systemd either would work.

Quoted 7 lines
Quoted 5 lines

Its possible to use this package standalone (without the dbus package - if buildroot's systemd would not depend on dbus). This is sufficient to provide systemd's (d)bus functionality. To allow standalone usage, the necessary config files are copied and adopted over from dbus.

Sorry, but this explanation does not make sense to me...

systemd depends on dbus, as in *config file in buildroot*. if you remove that dependency you can build a rootfs:
- without dbus/dbus broker (reduced functionality of course, but
quite usable for single-user)
- with one of them
- with both of them

Quoted 8 lines

So you mean you;d like to be able to uses sytemd with dbus-broker rather than with the original dbus? In that case, you can change systemd' Config.in to something like:

select BR2_PACKAGE_DBUS if !BR2_PACKAGE_DBUS_BROKER # runtime

... in a followup patch

Yeah, I already have a series for systemd stuck in limbo for a long time [1] (aswell as this package [2]), and also use systemd without either in some systems.

If you got feedback for [1], I plan to resubmit the series with some extensions

Quoted 5 lines

Also, the part about the config files should probably bne a separate paragraph, otherwise it gets confusing...

[--SNIP--]

Quoted 11 lines

package/dbusbroker/Config.in line 2

Quoted 8 lines
package/dbusbroker/Config.in new file +2 -0
new file mode 100644
index 0000000000..aa628b4d5b
@@ -0,0 +1,23 @@
+config BR2_PACKAGE_DBUSBROKER
+     bool "dbusbroker"

The name as defined upstream is dbus-borker, so this is what we should be using too:

I am not one to regularly point out typos, but this made me smile.

Quoted 3 lines

package/dbus-broker/
BR2_PACKAGE_DBUS_BROKER

Ok. thought this would seem like a plugin for dbus that way.

Quoted 5 lines

package/dbusbroker/Config.in line 4

Quoted 3 lines
package/dbusbroker/Config.in new file +2 -0
+     depends on BR2_TOOLCHAIN_HAS_THREADS
+     depends on BR2_USE_MMU

Dependency on MMU should be first.

Ok

Quoted 9 lines

package/dbusbroker/Config.in line 7

Quoted 4 lines
package/dbusbroker/Config.in new file +3 -0
+     depends on BR2_INIT_SYSTEMD
+     select BR2_PACKAGE_EXPAT
+     select BR2_PACKAGE_SYSTEMD

No, you can't select BR2_PACKAGE_SYSTEMD.

For one, it is forcibly enabled by BR2_INIT_SYSTEMD, so as you depend on it, you areguaranteed it is availbe.

Ok

Quoted 4 lines

However, systemd does not look like it is a mandatory dependency of dbus-broker. Indeed, systemd is only needed for the launcher, which is optional.

I don't know what the daemon does without a launcher (that's the main service). (I wondered about that line too)

Quoted 3 lines

So you should drop the depenency on BR2_INIT_SYSTEMD, and you must drop the select on BR2_PACKAGE_SYSTEMD.

I know how to use dbus-broker with systemd, I dont know what it does without. Just depend on BR2_INIT_SYSTEMD for the first inclusion to leave room for someone smarter than me to fix that?

Quoted 13 lines

[--SNIP--]

package/dbusbroker/dbusbroker.hash line 3

Quoted 9 lines
package/dbusbroker/dbusbroker.hash new file +3 -0
new file mode 100644
index 0000000000..4eefe63725
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256       95adfde56bce898c3b69eee0524732365e802348dd8189a35d5d00c30990dc81        dbus-broker-23.tar.xz
+sha256       3cda3630283eda0eab825abe5ac84d191248c6b3fe1c232a118124959b96c6a4        LICENSE

The convention is to use two spaces to spearate the fields now.

OK

Quoted 65 lines
Quoted 17 lines
package/dbusbroker/dbusbroker.mk new file +10 -0
new file mode 100644
index 0000000000..71d13e5ebe
@@ -0,0 +1,45 @@
+################################################################################
+#
+# dbusbroker
+#
+# Launching services is delegated to systemd so there is very little else
+# needed. No separate user is necessary and no helper for launching.
+#
+# Service + Config files were copied over from dbus,
+# uneeded / unecessary entries removed for clarity.
+#

package/dbusbroker/dbusbroker.mk line 20

Quoted 10 lines
package/dbusbroker/dbusbroker.mk new file +10 -0
+################################################################################
+
+DBUSBROKER_VERSION = 23
+DBUSBROKER_SOURCE = dbus-broker-$(DBUSBROKER_VERSION).tar.xz
+DBUSBROKER_SITE = https://github.com/bus1/dbus-broker/releases/download/v$(DBUSBROKER_VERSION)
+
+DBUSBROKER_LICENSE = Apache-2.0
+DBUSBROKER_LICENSE_FILES = LICENSE
+# Compatibility Launcher requires this
+DBUSBROKER_DEPENDENCIES += expat systemd

Do not use += on the first assignment of DEPENDENCIES (unless said first assignment is in a conditional block).

However, systemd is not a mandatory requirement; it is only needed for the launcher.

So:

    # BR2_COREUTILS_HOST_DEPENDENCY to be able to use ln --relative
    ifeq ($(BR2_PACKAGE_SYSTEMD),y)
    DBUS_BROKER_DEPENDENCIES += $(BR2_COREUTILS_HOST_DEPENDENCY) expat systemd
    DBUS_BROKER_CONF_OPTS += -Dlauncher=true
    else
    DBUS_BROKER_CONF_OPTS += -Dlauncher=false
    endif

    # Do not install units for system bus daemon if original dbus present
    ifeq ($(BR2_PACKAGE_DBUS),)
    define DBUS_BROKER_INSTALL_INIT_SYSTEMD
        $(INSTALL) -D -m644 $(DBUSBROKER_PKGDIR)/dbus.socket \
            $(TARGET_DIR)/usr/lib/systemd/system/dbus.socket
        $(HOST_MAKE_ENV) ln -sf --relative \
            $(TARGET_DIR)/usr/lib/systemd/system/dbus.socket \
            $(TARGET_DIR)/usr/lib/systemd/system/sockets.target.wants/dbus.socket
    endef
    endif

But you also need to provide startup script for the non-systemd case:

    # Do not install startup script for system bus daemon if original dbus present
    ifeq ($(BR2_PACKAGE_DBUS),)
    define DBUS_BROKER_INSTALL_INIT_SYSV
        $(INSTALL) -D -m 0755 $(DBUSBROKER_PKGDIR)/S30dbus-broker \
            $(TARGET_DIR)/etc/init.d/S30dbus-broker
    endef
    endif
Quoted 2 lines

(use your imagination to come up with a good startup script; use package/busybox/S01syslogd as reference.)

The service *is* the launcher that's not built without systemd.

Quoted 9 lines

package/dbusbroker/dbusbroker.mk line 23

Quoted 3 lines
package/dbusbroker/dbusbroker.mk new file +2 -0
+ifeq ($(BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_17),y)
+DBUSBROKER_CONF_OPTS += -Dlinux-4-17=true

We want to explicitly disable that otherwise:

    else
    DBUSBROKER_CONF_OPTS += -Dlinux-4-17=false
    endif

Ok

Quoted 23 lines

package/dbusbroker/dbusbroker.mk line 35

Quoted 13 lines
package/dbusbroker/dbusbroker.mk new file +12 -0
+endif
+
+ifeq ($(BR2_PACKAGE_LIBSELINUX),y)
+DBUSBROKER_DEPENDENCIES += libselinux
+DBUSBROKER_CONF_OPTS += -Dselinux=true
+else
+DBUSBROKER_CONF_OPTS += -Dselinux=false
+endif
+
+# Only install config and service files if dbus is not available
+ifeq ($(BR2_PACKAGE_DBUS),)
+define DBUSBROKER_INSTALL_TARGET_POST

This macro name is not explict. What about:
DBUS_BROKER_INSTALL_CONFIG_FILES

package/dbusbroker/dbusbroker.mk line 37

Quoted 2 lines
package/dbusbroker/dbusbroker.mk new file +2 -0
+     $(INSTALL) -D -m644 $(DBUSBROKER_PKGDIR)/dbus.socket $(TARGET_DIR)/usr/lib/systemd/system/dbus.socket
+     ln -sf ../dbus.socket $(TARGET_DIR)/usr/lib/systemd/system/sockets.target.wants/dbus.socket

The systemd-related files should only be installed if systemd is enabled (see above).

Quoted 8 lines

package/dbusbroker/dbusbroker.mk line 39

Quoted 2 lines
package/dbusbroker/dbusbroker.mk new file +2 -0
+     $(INSTALL) -D -m644 $(DBUSBROKER_PKGDIR)/session.conf $(TARGET_DIR)/usr/share/dbus-1/session.conf
+     $(INSTALL) -D -m644 $(DBUSBROKER_PKGDIR)/system.conf $(TARGET_DIR)/usr/share/dbus-1/system.conf

Split lines that are too long.

Also, even if the original dbus is enabled (e.g. as the system bus, but one uses dbus-broker as session bus), one may still need those files on the target.

I copied them over from dbus, means if dbus is installed the files are there.

Quoted 16 lines

So we may want to unconditionally install both of them as:

    $(TARGET_DIR)/usr/share/dbus-1/system-broker.conf
    $(TARGET_DIR)/usr/share/dbus-1/session-broker.conf

... and when the origian dbus is not enabled, then we symlink those two to be the default ones.

package/dbusbroker/dbusbroker.mk line 43

Quoted 4 lines
package/dbusbroker/dbusbroker.mk new file +4 -0
+endef
+
+DBUSBROKER_POST_INSTALL_TARGET_HOOKS += DBUSBROKER_INSTALL_TARGET_POST
+endif

I think we also need a user to run the system daemon, like is done with the original dbus:

Quoted 3 lines

define DBUS_BROKER_USERS
dbus-broker -1 dbus-broker -1 * /var/run/dbus-broker - - dbus-broker messagebus user
endef

Nope, that's only for limiting rights for the launcher tool. Launching is delegated to systemd as far as I understand it,
no user necessary.

Quoted 10 lines

package/dbusbroker/session.conf

Quoted 8 lines
package/dbusbroker/dbusbroker.mk new file +1 -0
+$(eval $(meson-package))
package/dbusbroker/session.conf new file +0 -0
new file mode 100644
index 0000000000..e4758fa218
@@ -0,0 +1,65 @@

[--SNIP--]

Quoted 6 lines

I would like that we have a very simple, basic session config file, that does not filter anything for the owning user, and does not allow any other user to connect.

People who need more complex configurations will have to provide their own session config file.

I copied over the file from dbus and removed the keys that are not understood by dbus-broker,
should cause the least trouble as it then should work closely like dbus?

Quoted 28 lines
Quoted 12 lines
package/dbusbroker/system.conf new file +5 -0
new file mode 100644
index 0000000000..a1e8df7367
@@ -0,0 +1,120 @@
+<!-- This configuration file controls the systemwide message bus.
+     Add a system-local.conf and edit that rather than changing this
+     file directly. -->
+
+<!-- Note that there are any number of ways you can hose yourself

package/dbusbroker/system.conf line 15

Quoted 10 lines
package/dbusbroker/system.conf new file +10 -0
+     security-wise by screwing up this file; in particular, you
+     probably don't want to listen on any more addresses, add any more
+     auth mechanisms, run as a different user, etc. -->
+
+<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-Bus Bus Configuration 1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
+<busconfig>
+
+  <!-- Our well-known bus type, do not change this -->
+  <type>system</type>

And we should use the 'dbus-broker' user:

      <!-- Run as special user -->
      <user>dbus-broker</user>
Quoted 7 lines

package/dbusbroker/system.conf line 18

Quoted 2 lines
package/dbusbroker/system.conf new file +2 -0
+  <!-- Fork into daemon mode -->
+  <fork/>

With systemd, isn't this playing badly with systemd's monitoring of processes? I.e. this implies setting forking=tru in the unit for this dameon, while systemd is usually very capable and spawning dameons in the background.

I am pretty sure this does not have an effect at all.

Quoted 112 lines
Quoted 105 lines
package/dbusbroker/system.conf new file +101 -1
+  <!-- We use system service launching using a helper -->
+  <standard_system_servicedirs/>
+
+  <!-- Enable logging to syslog -->
+  <syslog/>
+
+  <policy context="default">
+    <!-- All users can connect to system bus -->
+    <allow user="*"/>
+
+    <!-- Holes must be punched in service configuration files for
+         name ownership and sending method calls -->
+    <deny own="*"/>
+    <deny send_type="method_call"/>
+
+    <!-- Signals and reply messages (method returns, errors) are allowed
+         by default -->
+    <allow send_type="signal"/>
+    <allow send_requested_reply="true" send_type="method_return"/>
+    <allow send_requested_reply="true" send_type="error"/>
+
+    <!-- All messages may be received by default -->
+    <allow receive_type="method_call"/>
+    <allow receive_type="method_return"/>
+    <allow receive_type="error"/>
+    <allow receive_type="signal"/>
+
+    <!-- Allow anyone to talk to the message bus -->
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.DBus" />
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.DBus.Introspectable"/>
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.DBus.Properties"/>
+    <!-- But disallow some specific bus services -->
+    <deny send_destination="org.freedesktop.DBus"
+          send_interface="org.freedesktop.DBus"
+          send_member="UpdateActivationEnvironment"/>
+    <deny send_destination="org.freedesktop.DBus"
+          send_interface="org.freedesktop.DBus.Debug.Stats"/>
+    <deny send_destination="org.freedesktop.DBus"
+          send_interface="org.freedesktop.systemd1.Activator"/>
+  </policy>
+
+  <!-- Only systemd, which runs as root, may report activation failures. -->
+  <policy user="root">
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.systemd1.Activator"/>
+  </policy>
+
+  <!-- root may monitor the system bus. -->
+  <policy user="root">
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.DBus.Monitoring"/>
+  </policy>
+
+  <!-- If the Stats interface was enabled@compile-time, root may use it.
+       Copy this into system.local.conf or system.d/*.conf if you want to
+       enable other privileged users to view statistics and debug info -->
+  <policy user="root">
+    <allow send_destination="org.freedesktop.DBus"
+           send_interface="org.freedesktop.DBus.Debug.Stats"/>
+  </policy>
+
+
+  <!-- The defaults for these limits are hard-coded in dbus-daemon.
+       Some clarifications:
+       Times are in milliseconds (ms); 1000ms = 1 second
+       133169152 bytes = 127 MiB
+       33554432 bytes = 32 MiB
+       150000ms = 2.5 minutes -->
+  <!-- <limit name="max_incoming_bytes">133169152</limit> -->
+  <!-- <limit name="max_incoming_unix_fds">64</limit> -->
+  <!-- <limit name="max_outgoing_bytes">133169152</limit> -->
+  <!-- <limit name="max_outgoing_unix_fds">64</limit> -->
+  <!-- <limit name="max_message_size">33554432</limit> -->
+  <!-- <limit name="max_message_unix_fds">16</limit> -->
+  <!-- <limit name="service_start_timeout">25000</limit> -->
+  <!-- <limit name="auth_timeout">5000</limit> -->
+  <!-- <limit name="pending_fd_timeout">150000</limit> -->
+  <!-- <limit name="max_completed_connections">2048</limit> -->
+  <!-- <limit name="max_incomplete_connections">64</limit> -->
+  <!-- <limit name="max_connections_per_user">256</limit> -->
+  <!-- <limit name="max_pending_service_starts">512</limit> -->
+  <!-- <limit name="max_names_per_connection">512</limit> -->
+  <!-- <limit name="max_match_rules_per_connection">512</limit> -->
+  <!-- <limit name="max_replies_per_connection">128</limit> -->
+
+  <!-- Config files are placed here that among other things, punch
+       holes in the above policy for specific services. -->
+  <includedir>system.d</includedir>
+
+  <includedir>/etc/dbus-1/system.d</includedir>
+
+  <!-- This is included last so local configuration can override what's
+       in this standard file -->
+  <include ignore_missing="yes">/etc/dbus-1/system-local.conf</include>
+
+  <include if_selinux_enabled="yes" selinux_root_relative="yes">contexts/dbus_contexts</include>
+
+</busconfig>
--

2.26.2

Quoted 4 lines

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
.-----------------.--------------------.------------------.--------------------.

Quoted 5 lines
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |

'------------------------------^-------^------------------^--------------------'

[1] https://patchwork.ozlabs.org/project/buildroot/list/?series=157061
[2] https://patchwork.ozlabs.org/project/buildroot/list/?series=157062

Norbert