Skip to contentSkip to conversation

MIPS: BCM63xx: improve CFE version detection

PATCH Applied Álvaro Fernández Rojas 2 participants 2 messages Jun 8, 2020 – Jul 24, 2020 MIPS

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 MIPS: BCM63xx: improve CFE version detection

There are some CFE variants that start with 'cfe-vd' instead of 'cfe-v', such as the one used in the Huawei HG556a: "cfe-vd081.5003". In this case, the CFE version is stored as is (string vs number bytes).

Some newer devices have an additional version number, such as the Comtrend
VR-3032u: "1.0.38-112.118-11".

Finally, print the string as is if the version doesn't start with "cfe-v" or "cfe-vd", but starts with "cfe-".

---
 arch/mips/bcm63xx/boards/board_bcm963xx.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)
arch/mips/bcm63xx/boards/board_bcm963xx.c +18 -4
index 36ec3dc2c999..38f812383998 100644
@@ -763,11 +763,25 @@ void __init board_prom_init(void)
 
 	/* dump cfe version */
 	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
-	if (!memcmp(cfe, "cfe-v", 5))
-		snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
-			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
-	else
+	if (strstarts(cfe, "cfe-")) {
+		if(cfe[4] == 'v') {
+			if(cfe[5] == 'd')
+				snprintf(cfe_version, 11, "%s",
+					 (char *) &cfe[5]);
+			else if (cfe[10] > 0)
+				snprintf(cfe_version, sizeof(cfe_version),
+					 "%u.%u.%u-%u.%u-%u", cfe[5], cfe[6],
+					 cfe[7], cfe[8], cfe[9], cfe[10]);
+			else
+				snprintf(cfe_version, sizeof(cfe_version),
+					 "%u.%u.%u-%u.%u", cfe[5], cfe[6],
+					 cfe[7], cfe[8], cfe[9]);
+		} else {
+			snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
+		}
+	} else {
 		strcpy(cfe_version, "unknown");
+	}
 	pr_info("CFE version: %s\n", cfe_version);
 
 	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
Signature · 1 line
2.26.2
maintainer Applied
#1 lore raw
Quoted 7 lines · Álvaro Fernández Rojas

There are some CFE variants that start with 'cfe-vd' instead of 'cfe-v', such as the one used in the Huawei HG556a: "cfe-vd081.5003". In this case, the CFE version is stored as is (string vs number bytes).

Some newer devices have an additional version number, such as the Comtrend
VR-3032u: "1.0.38-112.118-11".

Quoted 7 lines

Finally, print the string as is if the version doesn't start with "cfe-v" or "cfe-vd", but starts with "cfe-".

---
 arch/mips/bcm63xx/boards/board_bcm963xx.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

applied to mips-next.

Thomas.

Signature · 2 lines
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]