Skip to contentSkip to conversation

imx8mp_evk: spl: drop useless code

PATCH New Fabio Estevam 2 participants 12 messages May 26, 2020 – Jun 8, 2020 Arm i.MX and Layerscape

lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH v3 1/5 imx8mp_evk: spl: drop useless code

From: Peng Fan <[email protected]>

Drop useless getting ccm device, there is no need to explicted do this in board code, and we not enable SPL CLK currently.

---
Changes since v2:
- None. Rebased against U-Boot master

 board/freescale/imx8mp_evk/spl.c | 14 --------------
 1 file changed, 14 deletions(-)
board/freescale/imx8mp_evk/spl.c +0 -14
index cd5b32c3f8..f2cc177757 100644
@@ -29,11 +29,6 @@
 #include <mmc.h>
 #include <asm/arch/ddr.h>
 
-#include <dm/uclass.h>
-#include <dm/device.h>
-#include <dm/uclass-internal.h>
-#include <dm/device-internal.h>
-
 DECLARE_GLOBAL_DATA_PTR;
 
 int spl_board_boot_device(enum boot_device boot_dev_spl)
@@ -48,16 +43,7 @@ void spl_dram_init(void)
 
 void spl_board_init(void)
 {
-	struct udevice *dev;
-	int ret;
-
 	puts("Normal Boot\n");
-
-	ret = uclass_get_device_by_name(UCLASS_CLK,
-					"clock-controller at 30380000",
-					&dev);
-	if (ret < 0)
-		printf("Failed to find clock node. Check device tree\n");
 }
 
 #define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PE)
Signature · 1 line
2.17.1
#2 lore raw

PATCH v3 1/5 imx8mp_evk: spl: drop useless code

Quoted 6 lines · Fabio Estevam

Hi Stefano,

Quoted 3 lines · Fabio Estevam

From: Peng Fan <[email protected]>

Quoted 8 lines
Quoted 5 lines

Drop useless getting ccm device, there is no need to explicted do this in board code, and we not enable SPL CLK currently.

Please consider this series for 2020.07 as it fixes the boot problem.

Ok, thanks - I will go on through patches to check what should be pushed to Tom.

Regards,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author reviewer
#3 lore raw

PATCH v3 2/5 imx8mp_evk: spl: drop timer_init

In reply to Fabio Estevam

From: Peng Fan <[email protected]>

timer_init has been invoked in arch_cpu_init, no need to invoke it again in board code.

---
Changes since v2:
- None. Rebased against U-Boot master

 board/freescale/imx8mp_evk/spl.c | 2 --
 1 file changed, 2 deletions(-)
board/freescale/imx8mp_evk/spl.c +0 -2
index 3f9e6fcc8f..3b3112077a 100644
@@ -118,8 +118,6 @@ void board_init_f(ulong dummy)
 
 	board_early_init_f();
 
-	timer_init();
-
 	preloader_console_init();
 
 	/* Clear the BSS. */
Signature · 1 line
2.17.1
#4 lore raw

PATCH v3 2/5 imx8mp_evk: spl: drop timer_init

Quoted 5 lines

From: Peng Fan <[email protected]>
timer_init has been invoked in arch_cpu_init, no need to invoke it again in board code.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author reviewer
#5 lore raw

PATCH v3 3/5 imx8mp_evk: spl: use spl_early_init

In reply to Fabio Estevam

From: Peng Fan <[email protected]>

Use spl_early_init to replace spl_init, spl_init will be invoked in board_init_r, we only need use spl_early_init to setup malloc and scan early dt.

---
Changes since v2:
- None. Rebased against U-Boot master

 board/freescale/imx8mp_evk/spl.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
board/freescale/imx8mp_evk/spl.c +6 -6
index 3b3112077a..6fc3df5aee 100644
@@ -118,17 +118,17 @@ void board_init_f(ulong dummy)
 
 	board_early_init_f();
 
-	preloader_console_init();
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	ret = spl_init();
+	ret = spl_early_init();
 	if (ret) {
 		debug("spl_init() failed: %d\n", ret);
 		hang();
 	}
 
+	preloader_console_init();
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
 	enable_tzc380();
 
 	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
Signature · 1 line
2.17.1
#6 lore raw

PATCH v3 3/5 imx8mp_evk: spl: use spl_early_init

Quoted 6 lines

From: Peng Fan <[email protected]>
Use spl_early_init to replace spl_init, spl_init will be invoked in board_init_r, we only need use spl_early_init to setup malloc and scan early dt.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author reviewer
#7 lore raw

PATCH v3 4/5 imx8mp_evk: spl: no need the code since spl framework could do that

In reply to Fabio Estevam

From: Peng Fan <[email protected]>

We no need invoke the code, since spl framework could help us do that.

---
Changes since v2:
- None. Rebased against U-Boot master

 board/freescale/imx8mp_evk/spl.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
board/freescale/imx8mp_evk/spl.c +1 -5
index 6fc3df5aee..f9aa0b0826 100644
@@ -108,6 +108,7 @@ int board_fit_config_name_match(const char *name)
 }
 #endif
 
+/* Do not use BSS area in this phase */
 void board_init_f(ulong dummy)
 {
 	int ret;
@@ -126,9 +127,6 @@ void board_init_f(ulong dummy)
 
 	preloader_console_init();
 
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
 	enable_tzc380();
 
 	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
@@ -137,6 +135,4 @@ void board_init_f(ulong dummy)
 
 	/* DDR initialization */
 	spl_dram_init();
-
-	board_init_r(NULL, 0);
 }
Signature · 1 line
2.17.1
#8 lore raw

PATCH v3 4/5 imx8mp_evk: spl: no need the code since spl framework could do that

Quoted 5 lines

From: Peng Fan <[email protected]>
We no need invoke the code, since spl framework could help us do that.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author reviewer
#9 lore raw

PATCH v3 5/5 imx: imx8mp_evk: fix boot issue

In reply to Fabio Estevam

From: Peng Fan <[email protected]>

The u-boot-spl.bin pad with ddr firmware conflicts with the CONFIG_MALLOC_F_ADDR area, the ddr firmware will be overwritten by malloc in SPL stage and cause ddr initialization not able to finish. So update the related addresses to fix the issue.

---
Changes since v2:
- None. Rebased against U-Boot master

 configs/imx8mp_evk_defconfig |  3 ++-
 include/configs/imx8mp_evk.h | 12 +++++-------
 2 files changed, 7 insertions(+), 8 deletions(-)
configs/imx8mp_evk_defconfig +2 -1
index 44b2935f69..3189b2ad99 100644
@@ -4,7 +4,8 @@ CONFIG_SYS_TEXT_BASE=0x40200000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x10000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x400000
 CONFIG_SYS_I2C_MXC_I2C1=y
include/configs/imx8mp_evk.h +5 -7
index b346154fb3..7f38f21c09 100644
@@ -24,16 +24,14 @@
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
 #define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
-#define CONFIG_SPL_STACK		0x990000
-#define CONFIG_SPL_BSS_START_ADDR      0x0095e000
-#define CONFIG_SPL_BSS_MAX_SIZE        0x2000	/* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     SZ_512K	/* 512 KB */
+#define CONFIG_SPL_STACK		0x960000
+#define CONFIG_SPL_BSS_START_ADDR	0x0098FC00
+#define CONFIG_SPL_BSS_MAX_SIZE		0x400	/* 1 KB */
+#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
 
-#define CONFIG_MALLOC_F_ADDR		0x940000
-
 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #undef CONFIG_DM_MMC
Signature · 1 line
2.17.1
#10 lore raw

PATCH v3 5/5 imx: imx8mp_evk: fix boot issue

Quoted 8 lines

From: Peng Fan <[email protected]>
The u-boot-spl.bin pad with ddr firmware conflicts with the CONFIG_MALLOC_F_ADDR area, the ddr firmware will be overwritten by malloc in SPL stage and cause ddr initialization not able to finish. So update the related addresses to fix the issue.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#11 lore raw

PATCH v3 1/5 imx8mp_evk: spl: drop useless code

In reply to Fabio Estevam
Quoted 5 lines

From: Peng Fan <[email protected]>
Drop useless getting ccm device, there is no need to explicted do this in board code, and we not enable SPL CLK currently.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================