Skip to contentSkip to conversation

ath9x: Fix stack-out-of-bounds Write in ath9k_hif_usb_rx_cb

PATCH New Sasha Levin 1 participant 37 messages Jun 8, 2020

Subsystems (12)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/37 ath9x: Fix stack-out-of-bounds Write in ath9k_hif_usb_rx_cb

From: Qiujun Huang <[email protected]>

[ Upstream commit 19d6c375d671ce9949a864fb9a03e19f5487b4d3 ]

Add barrier to accessing the stack array skb_pool.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/[email protected]

BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_stream
drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline]
BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
Write of size 8 at addr ffff8881db309a28 by task swapper/1/0

Call Trace:
ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626
[inline]
ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
__usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1648
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1713
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/net/wireless/ath/ath9k/hif_usb.c +5 -0
index 1f019df15a67..386e87ea8fc8 100644
@@ -608,6 +608,11 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 			hif_dev->remain_skb = nskb;
 			spin_unlock(&hif_dev->rx_lock);
 		} else {
+			if (pool_index == MAX_PKT_NUM_IN_TRANSFER) {
+				dev_err(&hif_dev->udev->dev,
+					"ath9k_htc: over RX MAX_PKT_NUM\n");
+				goto err;
+			}
 			nskb = __dev_alloc_skb(pkt_len + 32, GFP_ATOMIC);
 			if (!nskb) {
 				dev_err(&hif_dev->udev->dev,
Signature · 1 line
2.25.1
author maintainer
#1 lore raw

PATCH 2/37 ath9k: Fix use-after-free Write in ath9k_htc_rx_msg

From: Qiujun Huang <[email protected]>

[ Upstream commit e4ff08a4d727146bb6717a39a8d399d834654345 ]

Write out of slab bounds. We should check epid.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/[email protected]

BUG: KASAN: use-after-free in htc_process_conn_rsp
drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline]
BUG: KASAN: use-after-free in ath9k_htc_rx_msg+0xa25/0xaf0
drivers/net/wireless/ath/ath9k/htc_hst.c:443
Write of size 2 at addr ffff8881cea291f0 by task swapper/1/0

Call Trace:
 htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131

[inline]
ath9k_htc_rx_msg+0xa25/0xaf0
drivers/net/wireless/ath/ath9k/htc_hst.c:443
ath9k_hif_usb_reg_in_cb+0x1ba/0x630
drivers/net/wireless/ath/ath9k/hif_usb.c:718

__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
---
 drivers/net/wireless/ath/ath9k/htc_hst.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/net/wireless/ath/ath9k/htc_hst.c +3 -0
index fd85f996c554..257b6ee51e54 100644
@@ -114,6 +114,9 @@ static void htc_process_conn_rsp(struct htc_target *target,
 
 	if (svc_rspmsg->status == HTC_SERVICE_SUCCESS) {
 		epid = svc_rspmsg->endpoint_id;
+		if (epid < 0 || epid >= ENDPOINT_MAX)
+			return;
+
 		service_id = be16_to_cpu(svc_rspmsg->service_id);
 		max_msglen = be16_to_cpu(svc_rspmsg->max_msg_len);
 		endpoint = &target->endpoint[epid];
Signature · 1 line
2.25.1
author maintainer
#2 lore raw

PATCH 3/37 spi: dw: Zero DMA Tx and Rx configurations on stack

In reply to Sasha Levin

From: Andy Shevchenko <[email protected]>

[ Upstream commit 3cb97e223d277f84171cc4ccecab31e08b2ee7b5 ]

Some DMA controller drivers do not tolerate non-zero values in the DMA configuration structures. Zero them to avoid issues with such DMA controller drivers. Even despite above this is a good practice per se.

---
 drivers/spi/spi-dw-mid.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/spi/spi-dw-mid.c +2 -0
index bb1052e748f2..4d6434b244e2 100644
@@ -155,6 +155,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
 	if (!xfer->tx_buf)
 		return NULL;
 
+	memset(&txconf, 0, sizeof(txconf));
 	txconf.direction = DMA_MEM_TO_DEV;
 	txconf.dst_addr = dws->dma_addr;
 	txconf.dst_maxburst = 16;
@@ -201,6 +202,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 	if (!xfer->rx_buf)
 		return NULL;
 
+	memset(&rxconf, 0, sizeof(rxconf));
 	rxconf.direction = DMA_DEV_TO_MEM;
 	rxconf.src_addr = dws->dma_addr;
 	rxconf.src_maxburst = 16;
Signature · 1 line
2.25.1
author maintainer
#3 lore raw

PATCH 4/37 Bluetooth: Add SCO fallback for invalid LMP parameters error

In reply to Sasha Levin

From: Hsin-Yu Chao <[email protected]>

[ Upstream commit 56b5453a86203a44726f523b4133c1feca49ce7c ]

Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection with invalid parameter at the first SCO request expecting AG to attempt another SCO request with the use of "safe settings" for given codec, base on section 5.7.1.2 of HFP 1.7 specification.

This patch addresses it by adding "Invalid LMP Parameters" (0x1e) to the SCO fallback case. Verified with below log:

< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02) Packet type: 0x0380
3-EV3 may not be used
2-EV5 may not be used
3-EV5 may not be used

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

Num handles: 1
Handle: 256
Count: 1

Quoted 1 line

HCI Event: Max Slots Change (0x1b) plen 3

Handle: 256
Max slots: 1

Quoted 1 line

HCI Event: Synchronous Connect Complete (0x2c) plen 17

        Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e)
        Handle: 0
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x00
        Retransmission window: 0x02
        RX packet length: 0
        TX packet length: 0
        Air mode: Transparent (0x03)

< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 8
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02) Packet type: 0x03c8
EV3 may be used
2-EV3 may not be used
3-EV3 may not be used
2-EV5 may not be used
3-EV5 may not be used

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
Quoted 1 line

HCI Event: Max Slots Change (0x1b) plen 3

Handle: 256
Max slots: 5

Quoted 1 line

HCI Event: Max Slots Change (0x1b) plen 3

Handle: 256
Max slots: 1

Quoted 1 line

HCI Event: Synchronous Connect Complete (0x2c) plen 17

        Status: Success (0x00)
        Handle: 257
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x06
        Retransmission window: 0x04
        RX packet length: 30
        TX packet length: 30
        Air mode: Transparent (0x03)
---
 net/bluetooth/hci_event.c | 1 +
 1 file changed, 1 insertion(+)
net/bluetooth/hci_event.c +1 -0
index 37fe2b158c2a..1d957c7f1783 100644
@@ -3761,6 +3761,7 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
 	case 0x11:	/* Unsupported Feature or Parameter Value */
 	case 0x1c:	/* SCO interval rejected */
 	case 0x1a:	/* Unsupported Remote Feature */
+	case 0x1e:	/* Invalid LMP Parameters */
 	case 0x1f:	/* Unspecified error */
 	case 0x20:	/* Unsupported LMP Parameter value */
 		if (conn->out) {
Signature · 1 line
2.25.1
author maintainer
#4 lore raw

PATCH 5/37 kgdb: Prevent infinite recursive entries to the debugger

In reply to Sasha Levin

From: Douglas Anderson <[email protected]>

[ Upstream commit 3ca676e4ca60d1834bb77535dafe24169cadacef ]

If we detect that we recursively entered the debugger we should hack our I/O ops to NULL so that the panic() in the next line won't actually cause another recursion into the debugger. The first line of kgdb_panic() will check this and return.

---
 kernel/debug/debug_core.c | 1 +
 1 file changed, 1 insertion(+)
kernel/debug/debug_core.c +1 -0
index 79517e5549f1..9c939c6bf21c 100644
@@ -443,6 +443,7 @@ static int kgdb_reenter_check(struct kgdb_state *ks)
 
 	if (exception_level > 1) {
 		dump_stack();
+		kgdb_io_module_registered = false;
 		panic("Recursive entry to debugger");
 	}
 
Signature · 1 line
2.25.1
author maintainer
#5 lore raw

PATCH 6/37 spi: dw: Enable interrupts in accordance with DMA xfer mode

In reply to Sasha Levin

From: Serge Semin <[email protected]>

[ Upstream commit 43dba9f3f98c2b184a19f856f06fe22817bfd9e0 ]

It's pointless to track the Tx overrun interrupts if Rx-only SPI transfer is issued. Similarly there is no need in handling the Rx overrun/underrun interrupts if Tx-only SPI transfer is executed. So lets unmask the interrupts only if corresponding SPI transactions are implied.

---
 drivers/spi/spi-dw-mid.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/spi/spi-dw-mid.c +8 -4
index 4d6434b244e2..bd116f117b02 100644
@@ -228,19 +228,23 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 
 static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
-	u16 dma_ctrl = 0;
+	u16 imr = 0, dma_ctrl = 0;
 
 	dw_writel(dws, DW_SPI_DMARDLR, 0xf);
 	dw_writel(dws, DW_SPI_DMATDLR, 0x10);
 
-	if (xfer->tx_buf)
+	if (xfer->tx_buf) {
 		dma_ctrl |= SPI_DMA_TDMAE;
-	if (xfer->rx_buf)
+		imr |= SPI_INT_TXOI;
+	}
+	if (xfer->rx_buf) {
 		dma_ctrl |= SPI_DMA_RDMAE;
+		imr |= SPI_INT_RXUI | SPI_INT_RXOI;
+	}
 	dw_writel(dws, DW_SPI_DMACR, dma_ctrl);
 
 	/* Set the interrupt mask */
-	spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI);
+	spi_umask_intr(dws, imr);
 
 	dws->transfer_handler = dma_transfer;
 
Signature · 1 line
2.25.1
author maintainer
#6 lore raw

PATCH 7/37 clocksource: dw_apb_timer_of: Fix missing clockevent timers

In reply to Sasha Levin

From: Serge Semin <[email protected]>

[ Upstream commit 6d2e16a3181bafb77b535095c39ad1c8b9558c8c ]

Commit 100214889973 ("clocksource: dw_apb_timer_of: use clocksource_of_init") replaced a publicly available driver initialization method with one called by the timer_probe() method available after CLKSRC_OF. In current implementation it traverses all the timers available in the system and calls their initialization methods if corresponding devices were either in dtb or in acpi. But if before the commit any number of available timers would be installed as clockevent and clocksource devices, after that there would be at most two. The rest are just ignored since default case branch doesn't do anything. I don't see a reason of such behaviour, neither the commit message explains it. Moreover this might be wrong if on some platforms these timers might be used for different purpose, as virtually CPU-local clockevent timers and as an independent broadcast timer. So in order to keep the compatibility with the platforms where the order of the timers detection has some meaning, lets add the secondly discovered timer to be of clocksource/sched_clock type, while the very first and the others would provide the clockevents service.

Fixes 100214889973 ("clocksource: dw_apb_timer_of: use clocksource_of_init")
Cc Alexey Malahov <[email protected]>
Cc Thomas Bogendoerfer <[email protected]>
Cc Paul Burton <[email protected]>
Cc Ralf Baechle <[email protected]>
Cc Alessandro Zummo <[email protected]>
Cc Alexandre Belloni <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Rob Herring <[email protected]>
---
 drivers/clocksource/dw_apb_timer_of.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/clocksource/dw_apb_timer_of.c +2 -4
index a19a3f619cc7..99e5fd59964b 100644
@@ -134,16 +134,14 @@ static int num_called;
 static void __init dw_apb_timer_init(struct device_node *timer)
 {
 	switch (num_called) {
-	case 0:
-		pr_debug("%s: found clockevent timer\n", __func__);
-		add_clockevent(timer);
-		break;
 	case 1:
 		pr_debug("%s: found clocksource timer\n", __func__);
 		add_clocksource(timer);
 		init_sched_clock();
 		break;
 	default:
+		pr_debug("%s: found clockevent timer\n", __func__);
+		add_clockevent(timer);
 		break;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#7 lore raw

PATCH 8/37 btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums

In reply to Sasha Levin

From: Filipe Manana <[email protected]>

[ Upstream commit 7e4a3f7ed5d54926ec671bbb13e171cfe179cc50 ]

We are currently treating any non-zero return value from btrfs_next_leaf() the same way, by going to the code that inserts a new checksum item in the tree. However if btrfs_next_leaf() returns an error (a value < 0), we should just stop and return the error, and not behave as if nothing has happened, since in that case we do not have a way to know if there is a next leaf or we are currently at the last leaf already.

So fix that by returning the error from btrfs_next_leaf().

---
 fs/btrfs/file-item.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
fs/btrfs/file-item.c +4 -2
index 58ece6558430..fb5c97ea670f 100644
@@ -742,10 +742,12 @@ int btrfs_csum_file_blocks(struct btrfs_trans_handle *trans,
 		nritems = btrfs_header_nritems(path->nodes[0]);
 		if (!nritems || (path->slots[0] >= nritems - 1)) {
 			ret = btrfs_next_leaf(root, path);
-			if (ret == 1)
+			if (ret < 0) {
+				goto out;
+			} else if (ret > 0) {
 				found_next = 1;
-			if (ret != 0)
 				goto insert;
+			}
 			slot = path->slots[0];
 		}
 		btrfs_item_key_to_cpu(path->nodes[0], &found_key, slot);
Signature · 1 line
2.25.1
author maintainer
#8 lore raw

PATCH 9/37 ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE

In reply to Sasha Levin

From: Linus Walleij <[email protected]>

[ Upstream commit e1de94380af588bdf6ad6f0cc1f75004c35bc096 ]

Recent work with KASan exposed the folling hard-coded bitmask in arch/arm/mm/proc-macros.S:

bic rd, sp, #8128
bic rd, rd, #63

This forms the bitmask 0x1FFF that is coinciding with (PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming that THREAD_SIZE is always 8K (8192).

As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into this bug.

Fix it by this little oneline suggested by Ard:

bic rd, sp, #(THREAD_SIZE - 1) & ~63

Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.

We have to also include <linux/const.h> since the THREAD_SIZE expands to use the _AC() macro.

---
 arch/arm/mm/proc-macros.S | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mm/proc-macros.S +2 -1
index e6bfdcc381f8..1da55d34f4d6 100644
@@ -4,6 +4,7 @@
  *  VMA_VM_FLAGS
  *  VM_EXEC
  */
+#include <linux/const.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
@@ -30,7 +31,7 @@
  * act_mm - get current->active_mm
  */
 	.macro	act_mm, rd
-	bic	\rd, sp, #8128
+	bic	\rd, sp, #(THREAD_SIZE - 1) & ~63
 	bic	\rd, \rd, #63
 	ldr	\rd, [\rd, #TI_TASK]
 	ldr	\rd, [\rd, #TSK_ACTIVE_MM]
Signature · 1 line
2.25.1
author maintainer
#9 lore raw

PATCH 10/37 net: vmxnet3: fix possible buffer overflow caused by bad DMA value in vmxnet3_get_rss()

In reply to Sasha Levin

From: Jia-Ju Bai <[email protected]>

[ Upstream commit 3e1c6846b9e108740ef8a37be80314053f5dd52a ]

The value adapter->rss_conf is stored in DMA memory, and it is assigned to rssConf, so rssConf->indTableSize can be modified at anytime by malicious hardware. Because rssConf->indTableSize is assigned to n, buffer overflow may occur when the code "rssConf->indTable[n]" is executed.

To fix this possible bug, n is checked after being used.

---
 drivers/net/vmxnet3/vmxnet3_ethtool.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/vmxnet3/vmxnet3_ethtool.c +2 -0
index 9ba11d737753..f35597c44e3c 100644
@@ -664,6 +664,8 @@ vmxnet3_get_rss(struct net_device *netdev, u32 *p, u8 *key, u8 *hfunc)
 		*hfunc = ETH_RSS_HASH_TOP;
 	if (!p)
 		return 0;
+	if (n > UPT1_RSS_MAX_IND_TABLE_SIZE)
+		return 0;
 	while (n--)
 		p[n] = rssConf->indTable[n];
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#10 lore raw

PATCH 11/37 staging: android: ion: use vmap instead of vm_map_ram

In reply to Sasha Levin

From: Christoph Hellwig <[email protected]>

[ Upstream commit 5bf9917452112694b2c774465ee4dbe441c84b77 ]

vm_map_ram can keep mappings around after the vm_unmap_ram. Using that with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues.

Cc Christian Borntraeger <[email protected]>
Cc Christophe Leroy <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc David Airlie <[email protected]>
Cc Gao Xiang <[email protected]>
Cc Haiyang Zhang <[email protected]>
Cc Johannes Weiner <[email protected]>
Cc "K. Y. Srinivasan" <[email protected]>
Cc Laura Abbott <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Michael Kelley <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Robin Murphy <[email protected]>
Cc Sakari Ailus <[email protected]>
Cc Stephen Hemminger <[email protected]>
Cc Sumit Semwal <[email protected]>
Cc Wei Liu <[email protected]>
Cc Benjamin Herrenschmidt <[email protected]>
Cc Catalin Marinas <[email protected]>
Cc Heiko Carstens <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Vasily Gorbik <[email protected]>
Cc Will Deacon <[email protected]>
---
 drivers/staging/android/ion/ion_heap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/android/ion/ion_heap.c +2 -2
index 13a9b4c42b26..ae08b3253c21 100644
@@ -105,12 +105,12 @@ int ion_heap_map_user(struct ion_heap *heap, struct ion_buffer *buffer,
 
 static int ion_heap_clear_pages(struct page **pages, int num, pgprot_t pgprot)
 {
-	void *addr = vm_map_ram(pages, num, -1, pgprot);
+	void *addr = vmap(pages, num, VM_MAP, pgprot);
 
 	if (!addr)
 		return -ENOMEM;
 	memset(addr, 0, PAGE_SIZE * num);
-	vm_unmap_ram(addr, num);
+	vunmap(addr);
 
 	return 0;
 }
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#11 lore raw

PATCH 12/37 ath9k: Fix use-after-free Read in ath9k_wmi_ctrl_rx

In reply to Sasha Levin

From: Qiujun Huang <[email protected]>

[ Upstream commit abeaa85054ff8cfe8b99aafc5c70ea067e5d0908 ]

Free wmi later after cmd urb has been killed, as urb cb will access wmi.

the case reported by syzbot:
https://lore.kernel.org/linux-usb/[email protected]

BUG: KASAN: use-after-free in ath9k_wmi_ctrl_rx+0x416/0x500
drivers/net/wireless/ath/ath9k/wmi.c:215
Read of size 1 at addr ffff8881cef1417c by task swapper/1/0

Call Trace:
<IRQ>
ath9k_wmi_ctrl_rx+0x416/0x500 drivers/net/wireless/ath/ath9k/wmi.c:215
ath9k_htc_rx_msg+0x2da/0xaf0
drivers/net/wireless/ath/ath9k/htc_hst.c:459
ath9k_hif_usb_reg_in_cb+0x1ba/0x630
drivers/net/wireless/ath/ath9k/hif_usb.c:718
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
---
 drivers/net/wireless/ath/ath9k/hif_usb.c      |  5 +++--
 drivers/net/wireless/ath/ath9k/hif_usb.h      |  1 +
 drivers/net/wireless/ath/ath9k/htc_drv_init.c | 10 +++++++---
 drivers/net/wireless/ath/ath9k/wmi.c          |  5 ++++-
 drivers/net/wireless/ath/ath9k/wmi.h          |  3 ++-
 5 files changed, 17 insertions(+), 7 deletions(-)
drivers/net/wireless/ath/ath9k/hif_usb.c +3 -2
index 386e87ea8fc8..e2ed30b03af5 100644
@@ -974,7 +974,7 @@ static int ath9k_hif_usb_alloc_urbs(struct hif_device_usb *hif_dev)
 	return -ENOMEM;
 }
 
-static void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev)
+void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev)
 {
 	usb_kill_anchored_urbs(&hif_dev->regout_submitted);
 	ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
@@ -1341,8 +1341,9 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface)
 
 	if (hif_dev->flags & HIF_USB_READY) {
 		ath9k_htc_hw_deinit(hif_dev->htc_handle, unplugged);
-		ath9k_htc_hw_free(hif_dev->htc_handle);
 		ath9k_hif_usb_dev_deinit(hif_dev);
+		ath9k_destoy_wmi(hif_dev->htc_handle->drv_priv);
+		ath9k_htc_hw_free(hif_dev->htc_handle);
 	}
 
 	usb_set_intfdata(interface, NULL);
drivers/net/wireless/ath/ath9k/hif_usb.h +1 -0
index 7c2ef7ecd98b..a95cdf562611 100644
@@ -131,5 +131,6 @@ struct hif_device_usb {
 
 int ath9k_hif_usb_init(void);
 void ath9k_hif_usb_exit(void);
+void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev);
 
 #endif /* HTC_USB_H */
drivers/net/wireless/ath/ath9k/htc_drv_init.c +7 -3
index 8647ab77c019..3932e3d14f3d 100644
@@ -931,8 +931,9 @@ static int ath9k_init_device(struct ath9k_htc_priv *priv,
 int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 			   u16 devid, char *product, u32 drv_info)
 {
-	struct ieee80211_hw *hw;
+	struct hif_device_usb *hif_dev;
 	struct ath9k_htc_priv *priv;
+	struct ieee80211_hw *hw;
 	int ret;
 
 	hw = ieee80211_alloc_hw(sizeof(struct ath9k_htc_priv), &ath9k_htc_ops);
@@ -967,7 +968,10 @@ int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 	return 0;
 
 err_init:
-	ath9k_deinit_wmi(priv);
+	ath9k_stop_wmi(priv);
+	hif_dev = (struct hif_device_usb *)htc_handle->hif_dev;
+	ath9k_hif_usb_dealloc_urbs(hif_dev);
+	ath9k_destoy_wmi(priv);
 err_free:
 	ieee80211_free_hw(hw);
 	return ret;
@@ -982,7 +986,7 @@ void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug)
 			htc_handle->drv_priv->ah->ah_flags |= AH_UNPLUGGED;
 
 		ath9k_deinit_device(htc_handle->drv_priv);
-		ath9k_deinit_wmi(htc_handle->drv_priv);
+		ath9k_stop_wmi(htc_handle->drv_priv);
 		ieee80211_free_hw(htc_handle->drv_priv->hw);
 	}
 }
drivers/net/wireless/ath/ath9k/wmi.c +4 -1
index 9c16e2a6d185..8f14897ae5a3 100644
@@ -112,14 +112,17 @@ struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv)
 	return wmi;
 }
 
-void ath9k_deinit_wmi(struct ath9k_htc_priv *priv)
+void ath9k_stop_wmi(struct ath9k_htc_priv *priv)
 {
 	struct wmi *wmi = priv->wmi;
 
 	mutex_lock(&wmi->op_mutex);
 	wmi->stopped = true;
 	mutex_unlock(&wmi->op_mutex);
+}
 
+void ath9k_destoy_wmi(struct ath9k_htc_priv *priv)
+{
 	kfree(priv->wmi);
 }
 
drivers/net/wireless/ath/ath9k/wmi.h +2 -1
index 380175d5ecd7..d8b912206232 100644
@@ -179,7 +179,6 @@ struct wmi {
 };
 
 struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv);
-void ath9k_deinit_wmi(struct ath9k_htc_priv *priv);
 int ath9k_wmi_connect(struct htc_target *htc, struct wmi *wmi,
 		      enum htc_endpoint_id *wmi_ctrl_epid);
 int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
@@ -189,6 +188,8 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 void ath9k_wmi_event_tasklet(unsigned long data);
 void ath9k_fatal_work(struct work_struct *work);
 void ath9k_wmi_event_drain(struct ath9k_htc_priv *priv);
+void ath9k_stop_wmi(struct ath9k_htc_priv *priv);
+void ath9k_destoy_wmi(struct ath9k_htc_priv *priv);
 
 #define WMI_CMD(_wmi_cmd)						\
 	do {								\
Signature · 1 line
2.25.1
author maintainer
#12 lore raw

PATCH 13/37 ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb

In reply to Sasha Levin

From: Qiujun Huang <[email protected]>

[ Upstream commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 ]

In ath9k_hif_usb_rx_cb interface number is assumed to be 0. usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/[email protected]
usb 2-1: new high-speed USB device number 2 using dummy_hcd usb 2-1: config 1 has an invalid interface number: 2 but max is 0 usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0

Call Trace

__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 48 ++++++++++++++++++------
 drivers/net/wireless/ath/ath9k/hif_usb.h |  5 +++
 2 files changed, 42 insertions(+), 11 deletions(-)
drivers/net/wireless/ath/ath9k/hif_usb.c +37 -11
index e2ed30b03af5..e51f1a577897 100644
@@ -639,9 +639,9 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 
 static void ath9k_hif_usb_rx_cb(struct urb *urb)
 {
-	struct sk_buff *skb = (struct sk_buff *) urb->context;
-	struct hif_device_usb *hif_dev =
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+	struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+	struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+	struct sk_buff *skb = rx_buf->skb;
 	int ret;
 
 	if (!skb)
@@ -681,14 +681,15 @@ static void ath9k_hif_usb_rx_cb(struct urb *urb)
 	return;
 free:
 	kfree_skb(skb);
+	kfree(rx_buf);
 }
 
 static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 {
-	struct sk_buff *skb = (struct sk_buff *) urb->context;
+	struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+	struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+	struct sk_buff *skb = rx_buf->skb;
 	struct sk_buff *nskb;
-	struct hif_device_usb *hif_dev =
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 	int ret;
 
 	if (!skb)
@@ -746,6 +747,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 	return;
 free:
 	kfree_skb(skb);
+	kfree(rx_buf);
 	urb->context = NULL;
 }
 
@@ -791,7 +793,7 @@ static int ath9k_hif_usb_alloc_tx_urbs(struct hif_device_usb *hif_dev)
 	init_usb_anchor(&hif_dev->mgmt_submitted);
 
 	for (i = 0; i < MAX_TX_URB_NUM; i++) {
-		tx_buf = kzalloc(sizeof(struct tx_buf), GFP_KERNEL);
+		tx_buf = kzalloc(sizeof(*tx_buf), GFP_KERNEL);
 		if (!tx_buf)
 			goto err;
 
@@ -828,8 +830,9 @@ static void ath9k_hif_usb_dealloc_rx_urbs(struct hif_device_usb *hif_dev)
 
 static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 {
-	struct urb *urb = NULL;
+	struct rx_buf *rx_buf = NULL;
 	struct sk_buff *skb = NULL;
+	struct urb *urb = NULL;
 	int i, ret;
 
 	init_usb_anchor(&hif_dev->rx_submitted);
@@ -837,6 +840,12 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 
 	for (i = 0; i < MAX_RX_URB_NUM; i++) {
 
+		rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+		if (!rx_buf) {
+			ret = -ENOMEM;
+			goto err_rxb;
+		}
+
 		/* Allocate URB */
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (urb == NULL) {
@@ -851,11 +860,14 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 			goto err_skb;
 		}
 
+		rx_buf->hif_dev = hif_dev;
+		rx_buf->skb = skb;
+
 		usb_fill_bulk_urb(urb, hif_dev->udev,
 				  usb_rcvbulkpipe(hif_dev->udev,
 						  USB_WLAN_RX_PIPE),
 				  skb->data, MAX_RX_BUF_SIZE,
-				  ath9k_hif_usb_rx_cb, skb);
+				  ath9k_hif_usb_rx_cb, rx_buf);
 
 		/* Anchor URB */
 		usb_anchor_urb(urb, &hif_dev->rx_submitted);
@@ -881,6 +893,8 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 err_skb:
 	usb_free_urb(urb);
 err_urb:
+	kfree(rx_buf);
+err_rxb:
 	ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
 	return ret;
 }
@@ -892,14 +906,21 @@ static void ath9k_hif_usb_dealloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 
 static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 {
-	struct urb *urb = NULL;
+	struct rx_buf *rx_buf = NULL;
 	struct sk_buff *skb = NULL;
+	struct urb *urb = NULL;
 	int i, ret;
 
 	init_usb_anchor(&hif_dev->reg_in_submitted);
 
 	for (i = 0; i < MAX_REG_IN_URB_NUM; i++) {
 
+		rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+		if (!rx_buf) {
+			ret = -ENOMEM;
+			goto err_rxb;
+		}
+
 		/* Allocate URB */
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (urb == NULL) {
@@ -914,11 +935,14 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 			goto err_skb;
 		}
 
+		rx_buf->hif_dev = hif_dev;
+		rx_buf->skb = skb;
+
 		usb_fill_int_urb(urb, hif_dev->udev,
 				  usb_rcvintpipe(hif_dev->udev,
 						  USB_REG_IN_PIPE),
 				  skb->data, MAX_REG_IN_BUF_SIZE,
-				  ath9k_hif_usb_reg_in_cb, skb, 1);
+				  ath9k_hif_usb_reg_in_cb, rx_buf, 1);
 
 		/* Anchor URB */
 		usb_anchor_urb(urb, &hif_dev->reg_in_submitted);
@@ -944,6 +968,8 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 err_skb:
 	usb_free_urb(urb);
 err_urb:
+	kfree(rx_buf);
+err_rxb:
 	ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
 	return ret;
 }
drivers/net/wireless/ath/ath9k/hif_usb.h +5 -0
index a95cdf562611..835264c36595 100644
@@ -84,6 +84,11 @@ struct tx_buf {
 	struct list_head list;
 };
 
+struct rx_buf {
+	struct sk_buff *skb;
+	struct hif_device_usb *hif_dev;
+};
+
 #define HIF_USB_TX_STOP  BIT(0)
 #define HIF_USB_TX_FLUSH BIT(1)
 
Signature · 1 line
2.25.1
author maintainer
#13 lore raw

PATCH 14/37 e1000: Distribute switch variables for initialization

In reply to Sasha Levin

From: Kees Cook <[email protected]>

[ Upstream commit a34c7f5156654ebaf7eaace102938be7ff7036cb ]

Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body.

drivers/net/ethernet/intel/e1000/e1000_main.c: In function ?e1000_xmit_frame?:
drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable]

 3143 |     unsigned int pull_size;
      |                  ^~~~~~~~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/intel/e1000/e1000_main.c +3 -1
index 1f84f2fa459f..f958188207fd 100644
@@ -3162,8 +3162,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		if (skb->data_len && hdr_len == len) {
 			switch (hw->mac_type) {
+			case e1000_82544: {
 				unsigned int pull_size;
-			case e1000_82544:
+
 				/* Make sure we have room to chop off 4 bytes,
 				 * and that the end alignment will work out to
 				 * this hardware's requirements
@@ -3184,6 +3185,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				}
 				len = skb_headlen(skb);
 				break;
+			}
 			default:
 				/* do nothing */
 				break;
Signature · 1 line
2.25.1
author maintainer
#14 lore raw

PATCH 15/37 media: dvb: return -EREMOTEIO on i2c transfer failure.

In reply to Sasha Levin

From: Colin Ian King <[email protected]>

[ Upstream commit 96f3a9392799dd0f6472648a7366622ffd0989f3 ]

Currently when i2c transfers fail the error return -EREMOTEIO is assigned to err but then later overwritten when the tuner attach call is made. Fix this by returning early with the error return code -EREMOTEIO on i2c transfer failure errors.

If the transfer fails, an uninitialized value will be read from b2.

Addresses-Coverity: ("Unused value")

Fixes fbfee8684ff2 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll")
---
 drivers/media/usb/dvb-usb/dibusb-mb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/usb/dvb-usb/dibusb-mb.c +1 -1
index a4ac37e0e98b..d888e27dad3c 100644
@@ -84,7 +84,7 @@ static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap)
 
 	if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) {
 		err("tuner i2c write failed.");
-		ret = -EREMOTEIO;
+		return -EREMOTEIO;
 	}
 
 	if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
Signature · 1 line
2.25.1
author maintainer
#15 lore raw

PATCH 16/37 MIPS: Make sparse_init() using top-down allocation

In reply to Sasha Levin

From: Tiezhu Yang <[email protected]>

[ Upstream commit 269b3a9ac538c4ae87f84be640b9fa89914a2489 ]

In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB memory from the low pages by plat_swiotlb_setup(), it may lead to the boot process failed with kernel panic.

(1) On the Loongson and SiByte platform
arch/mips/loongson64/dma.c
arch/mips/sibyte/common/dma.c
void __init plat_swiotlb_setup(void)

{
	swiotlb_init(1);
}

kernel/dma/swiotlb.c
void __init
swiotlb_init(int verbose)
{
...

	vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
	if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
		return;
...
	pr_warn("Cannot allocate buffer");
	no_iotlb_memory = true;
}

phys_addr_t swiotlb_tbl_map_single()
{
...

	if (no_iotlb_memory)
		panic("Can not allocate SWIOTLB buffer earlier ...");

...
}

(2) On the Cavium OCTEON platform
arch/mips/cavium-octeon/dma-octeon.c
void __init plat_swiotlb_setup(void)
{
...

	octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE);
	if (!octeon_swiotlb)
		panic("%s: Failed to allocate %zu bytes align=%lx\n",
		      __func__, swiotlbsize, PAGE_SIZE);

...
}

Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic case.

In order to reduce the possibility of kernel panic when failed to get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as small as possible before plat_swiotlb_setup(), so make sparse_init() using top-down allocation.

---
 arch/mips/kernel/setup.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/mips/kernel/setup.c +10 -0
index 8fa30516f39d..33f5aeaf0024 100644
@@ -769,7 +769,17 @@ static void __init arch_mem_init(char **cmdline_p)
 				BOOTMEM_DEFAULT);
 #endif
 	device_tree_init();
+
+	/*
+	 * In order to reduce the possibility of kernel panic when failed to
+	 * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
+	 * low memory as small as possible before plat_swiotlb_setup(), so
+	 * make sparse_init() using top-down allocation.
+	 */
+	memblock_set_bottom_up(false);
 	sparse_init();
+	memblock_set_bottom_up(true);
+
 	plat_swiotlb_setup();
 	paging_init();
 
Signature · 1 line
2.25.1
author maintainer
#16 lore raw

PATCH 17/37 netfilter: nft_nat: return EOPNOTSUPP if type or flags are not supported

In reply to Sasha Levin

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit 0d7c83463fdf7841350f37960a7abadd3e650b41 ]

Instead of EINVAL which should be used for malformed netlink messages.

Fixes eb31628e37a0 ("netfilter: nf_tables: Add support for IPv6 NAT")
---
 net/netfilter/nft_nat.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/netfilter/nft_nat.c +2 -2
index ee2d71753746..868480b83649 100644
@@ -135,7 +135,7 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		priv->type = NF_NAT_MANIP_DST;
 		break;
 	default:
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	}
 
 	err = nft_nat_validate(ctx, expr, NULL);
@@ -206,7 +206,7 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 	if (tb[NFTA_NAT_FLAGS]) {
 		priv->flags = ntohl(nla_get_be32(tb[NFTA_NAT_FLAGS]));
 		if (priv->flags & ~NF_NAT_RANGE_MASK)
-			return -EINVAL;
+			return -EOPNOTSUPP;
 	}
 
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#17 lore raw

PATCH 18/37 lib/mpi: Fix 64-bit MIPS build with Clang

In reply to Sasha Levin

From: Nathan Chancellor <[email protected]>

[ Upstream commit 18f1ca46858eac22437819937ae44aa9a8f9f2fa ]

When building 64r6_defconfig with CONFIG_MIPS32_O32 disabled and CONFIG_CRYPTO_RSA enabled:

lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions

                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:664:22: note: expanded from macro 'umul_ppmm'
                 : "=d" ((UDItype)(w0))
                         ~~~~~~~~~~^~~
lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:668:22: note: expanded from macro 'umul_ppmm'
                 : "=d" ((UDItype)(w1))
                         ~~~~~~~~~~^~~

2 errors generated.

This special case for umul_ppmm for MIPS64r6 was added in commit bbc25bee37d2b ("lib/mpi: Fix umul_ppmm() for MIPS64r6"), due to GCC being inefficient and emitting a __multi3 intrinsic.

There is no such issue with clang; with this patch applied, I can build this configuration without any problems and there are no link errors like mentioned in the commit above (which I can still reproduce with GCC 9.3.0 when that commit is reverted). Only use this definition when GCC is being used.

This really should have been caught by commit b0c091ae04f67 ("lib/mpi:
Eliminate unused umul_ppmm definitions for MIPS") when I was messing around in this area but I was not testing 64-bit MIPS at the time.

---
 lib/mpi/longlong.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/mpi/longlong.h +1 -1
index f1f31c754b3e..70f5cf8deab3 100644
@@ -671,7 +671,7 @@ do {						\
 	**************  MIPS/64  **************
 	***************************************/
 #if (defined(__mips) && __mips >= 3) && W_TYPE_SIZE == 64
-#if defined(__mips_isa_rev) && __mips_isa_rev >= 6
+#if defined(__mips_isa_rev) && __mips_isa_rev >= 6 && defined(CONFIG_CC_IS_GCC)
 /*
  * GCC ends up emitting a __multi3 intrinsic call for MIPS64r6 with the plain C
  * code below, so we special case MIPS64r6 until the compiler can do better.
Signature · 1 line
2.25.1
author maintainer
#18 lore raw

PATCH 19/37 net: lpc-enet: fix error return code in lpc_mii_init()

In reply to Sasha Levin

From: Wei Yongjun <[email protected]>

[ Upstream commit 88ec7cb22ddde725ed4ce15991f0bd9dd817fd85 ]

Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function.

Fixes b7370112f519 ("lpc32xx: Added ethernet driver")
---
 drivers/net/ethernet/nxp/lpc_eth.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/nxp/lpc_eth.c +2 -1
index ba14bad81a21..14b5a0dbf40b 100644
@@ -865,7 +865,8 @@ static int lpc_mii_init(struct netdata_local *pldat)
 	if (mdiobus_register(pldat->mii_bus))
 		goto err_out_free_mdio_irq;
 
-	if (lpc_mii_probe(pldat->ndev) != 0)
+	err = lpc_mii_probe(pldat->ndev);
+	if (err)
 		goto err_out_unregister_bus;
 
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#19 lore raw

PATCH 20/37 net: allwinner: Fix use correct return type for ndo_start_xmit()

In reply to Sasha Levin

From: Yunjian Wang <[email protected]>

[ Upstream commit 09f6c44aaae0f1bdb8b983d7762676d5018c53bc ]

The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. And emac_start_xmit() can leak one skb if 'channel' == 3.

---
 drivers/net/ethernet/allwinner/sun4i-emac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/allwinner/sun4i-emac.c +2 -2
index 8d50314ac3eb..dde3cd2d4763 100644
@@ -438,7 +438,7 @@ static void emac_timeout(struct net_device *dev)
 /* Hardware start transmission.
  * Send a packet to media from the upper layer.
  */
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct emac_board_info *db = netdev_priv(dev);
 	unsigned long channel;
@@ -446,7 +446,7 @@ static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	channel = db->tx_fifo_stat & 3;
 	if (channel == 3)
-		return 1;
+		return NETDEV_TX_BUSY;
 
 	channel = (channel == 1 ? 1 : 0);
 
Signature · 1 line
2.25.1
author maintainer
#20 lore raw

PATCH 21/37 powerpc/spufs: fix copy_to_user while atomic

In reply to Sasha Levin

From: Jeremy Kerr <[email protected]>

[ Upstream commit 88413a6bfbbe2f648df399b62f85c934460b7a4d ]

Currently, we may perform a copy_to_user (through simple_read_from_buffer()) while holding a context's register_lock, while accessing the context save area.

This change uses a temporary buffer for the context save area data, which we then pass to simple_read_from_buffer.

Includes changes from Christoph Hellwig <[email protected]>.

Fixes bf1ab978be23 ("[POWERPC] coredump: Add SPU elf notes to coredump.")
[hch: renamed to function to avoid ___-prefixes]
---
 arch/powerpc/platforms/cell/spufs/file.c | 113 +++++++++++++++--------
 1 file changed, 75 insertions(+), 38 deletions(-)
arch/powerpc/platforms/cell/spufs/file.c +75 -38
index 5038fd578e65..e708c163fd6d 100644
@@ -2044,8 +2044,9 @@ static ssize_t __spufs_mbox_info_read(struct spu_context *ctx,
 static ssize_t spufs_mbox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
-	int ret;
 	struct spu_context *ctx = file->private_data;
+	u32 stat, data;
+	int ret;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
 		return -EFAULT;
@@ -2054,11 +2055,16 @@ static ssize_t spufs_mbox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_mbox_info_read(ctx, buf, len, pos);
+	stat = ctx->csa.prob.mb_stat_R;
+	data = ctx->csa.prob.pu_mb_R;
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	/* EOF if there's no entry in the mbox */
+	if (!(stat & 0x0000ff))
+		return 0;
+
+	return simple_read_from_buffer(buf, len, pos, &data, sizeof(data));
 }
 
 static const struct file_operations spufs_mbox_info_fops = {
@@ -2085,6 +2091,7 @@ static ssize_t spufs_ibox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	u32 stat, data;
 	int ret;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
@@ -2094,11 +2101,16 @@ static ssize_t spufs_ibox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_ibox_info_read(ctx, buf, len, pos);
+	stat = ctx->csa.prob.mb_stat_R;
+	data = ctx->csa.priv2.puint_mb_R;
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	/* EOF if there's no entry in the ibox */
+	if (!(stat & 0xff0000))
+		return 0;
+
+	return simple_read_from_buffer(buf, len, pos, &data, sizeof(data));
 }
 
 static const struct file_operations spufs_ibox_info_fops = {
@@ -2107,6 +2119,11 @@ static const struct file_operations spufs_ibox_info_fops = {
 	.llseek  = generic_file_llseek,
 };
 
+static size_t spufs_wbox_info_cnt(struct spu_context *ctx)
+{
+	return (4 - ((ctx->csa.prob.mb_stat_R & 0x00ff00) >> 8)) * sizeof(u32);
+}
+
 static ssize_t __spufs_wbox_info_read(struct spu_context *ctx,
 			char __user *buf, size_t len, loff_t *pos)
 {
@@ -2115,7 +2132,7 @@ static ssize_t __spufs_wbox_info_read(struct spu_context *ctx,
 	u32 wbox_stat;
 
 	wbox_stat = ctx->csa.prob.mb_stat_R;
-	cnt = 4 - ((wbox_stat & 0x00ff00) >> 8);
+	cnt = spufs_wbox_info_cnt(ctx);
 	for (i = 0; i < cnt; i++) {
 		data[i] = ctx->csa.spu_mailbox_data[i];
 	}
@@ -2128,7 +2145,8 @@ static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
-	int ret;
+	u32 data[ARRAY_SIZE(ctx->csa.spu_mailbox_data)];
+	int ret, count;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
 		return -EFAULT;
@@ -2137,11 +2155,13 @@ static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_wbox_info_read(ctx, buf, len, pos);
+	count = spufs_wbox_info_cnt(ctx);
+	memcpy(&data, &ctx->csa.spu_mailbox_data, sizeof(data));
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &data,
+				count * sizeof(u32));
 }
 
 static const struct file_operations spufs_wbox_info_fops = {
@@ -2150,27 +2170,33 @@ static const struct file_operations spufs_wbox_info_fops = {
 	.llseek  = generic_file_llseek,
 };
 
-static ssize_t __spufs_dma_info_read(struct spu_context *ctx,
-			char __user *buf, size_t len, loff_t *pos)
+static void spufs_get_dma_info(struct spu_context *ctx,
+		struct spu_dma_info *info)
 {
-	struct spu_dma_info info;
-	struct mfc_cq_sr *qp, *spuqp;
 	int i;
 
-	info.dma_info_type = ctx->csa.priv2.spu_tag_status_query_RW;
-	info.dma_info_mask = ctx->csa.lscsa->tag_mask.slot[0];
-	info.dma_info_status = ctx->csa.spu_chnldata_RW[24];
-	info.dma_info_stall_and_notify = ctx->csa.spu_chnldata_RW[25];
-	info.dma_info_atomic_command_status = ctx->csa.spu_chnldata_RW[27];
+	info->dma_info_type = ctx->csa.priv2.spu_tag_status_query_RW;
+	info->dma_info_mask = ctx->csa.lscsa->tag_mask.slot[0];
+	info->dma_info_status = ctx->csa.spu_chnldata_RW[24];
+	info->dma_info_stall_and_notify = ctx->csa.spu_chnldata_RW[25];
+	info->dma_info_atomic_command_status = ctx->csa.spu_chnldata_RW[27];
 	for (i = 0; i < 16; i++) {
-		qp = &info.dma_info_command_data[i];
-		spuqp = &ctx->csa.priv2.spuq[i];
+		struct mfc_cq_sr *qp = &info->dma_info_command_data[i];
+		struct mfc_cq_sr *spuqp = &ctx->csa.priv2.spuq[i];
 
 		qp->mfc_cq_data0_RW = spuqp->mfc_cq_data0_RW;
 		qp->mfc_cq_data1_RW = spuqp->mfc_cq_data1_RW;
 		qp->mfc_cq_data2_RW = spuqp->mfc_cq_data2_RW;
 		qp->mfc_cq_data3_RW = spuqp->mfc_cq_data3_RW;
 	}
+}
+
+static ssize_t __spufs_dma_info_read(struct spu_context *ctx,
+			char __user *buf, size_t len, loff_t *pos)
+{
+	struct spu_dma_info info;
+
+	spufs_get_dma_info(ctx, &info);
 
 	return simple_read_from_buffer(buf, len, pos, &info,
 				sizeof info);
@@ -2180,6 +2206,7 @@ static ssize_t spufs_dma_info_read(struct file *file, char __user *buf,
 			      size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	struct spu_dma_info info;
 	int ret;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
@@ -2189,11 +2216,12 @@ static ssize_t spufs_dma_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_dma_info_read(ctx, buf, len, pos);
+	spufs_get_dma_info(ctx, &info);
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &info,
+				sizeof(info));
 }
 
 static const struct file_operations spufs_dma_info_fops = {
@@ -2202,13 +2230,31 @@ static const struct file_operations spufs_dma_info_fops = {
 	.llseek = no_llseek,
 };
 
+static void spufs_get_proxydma_info(struct spu_context *ctx,
+		struct spu_proxydma_info *info)
+{
+	int i;
+
+	info->proxydma_info_type = ctx->csa.prob.dma_querytype_RW;
+	info->proxydma_info_mask = ctx->csa.prob.dma_querymask_RW;
+	info->proxydma_info_status = ctx->csa.prob.dma_tagstatus_R;
+
+	for (i = 0; i < 8; i++) {
+		struct mfc_cq_sr *qp = &info->proxydma_info_command_data[i];
+		struct mfc_cq_sr *puqp = &ctx->csa.priv2.puq[i];
+
+		qp->mfc_cq_data0_RW = puqp->mfc_cq_data0_RW;
+		qp->mfc_cq_data1_RW = puqp->mfc_cq_data1_RW;
+		qp->mfc_cq_data2_RW = puqp->mfc_cq_data2_RW;
+		qp->mfc_cq_data3_RW = puqp->mfc_cq_data3_RW;
+	}
+}
+
 static ssize_t __spufs_proxydma_info_read(struct spu_context *ctx,
 			char __user *buf, size_t len, loff_t *pos)
 {
 	struct spu_proxydma_info info;
-	struct mfc_cq_sr *qp, *puqp;
 	int ret = sizeof info;
-	int i;
 
 	if (len < ret)
 		return -EINVAL;
@@ -2216,18 +2262,7 @@ static ssize_t __spufs_proxydma_info_read(struct spu_context *ctx,
 	if (!access_ok(VERIFY_WRITE, buf, len))
 		return -EFAULT;
 
-	info.proxydma_info_type = ctx->csa.prob.dma_querytype_RW;
-	info.proxydma_info_mask = ctx->csa.prob.dma_querymask_RW;
-	info.proxydma_info_status = ctx->csa.prob.dma_tagstatus_R;
-	for (i = 0; i < 8; i++) {
-		qp = &info.proxydma_info_command_data[i];
-		puqp = &ctx->csa.priv2.puq[i];
-
-		qp->mfc_cq_data0_RW = puqp->mfc_cq_data0_RW;
-		qp->mfc_cq_data1_RW = puqp->mfc_cq_data1_RW;
-		qp->mfc_cq_data2_RW = puqp->mfc_cq_data2_RW;
-		qp->mfc_cq_data3_RW = puqp->mfc_cq_data3_RW;
-	}
+	spufs_get_proxydma_info(ctx, &info);
 
 	return simple_read_from_buffer(buf, len, pos, &info,
 				sizeof info);
@@ -2237,17 +2272,19 @@ static ssize_t spufs_proxydma_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	struct spu_proxydma_info info;
 	int ret;
 
 	ret = spu_acquire_saved(ctx);
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_proxydma_info_read(ctx, buf, len, pos);
+	spufs_get_proxydma_info(ctx, &info);
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &info,
+				sizeof(info));
 }
 
 static const struct file_operations spufs_proxydma_info_fops = {
Signature · 1 line
2.25.1
author maintainer
#21 lore raw

PATCH 22/37 ath9k_htc: Silence undersized packet warnings

In reply to Sasha Levin

From: Masashi Honma <[email protected]>

[ Upstream commit 450edd2805982d14ed79733a82927d2857b27cac ]

Some devices like TP-Link TL-WN722N produces this kind of messages frequently.

kernel: ath: phy0: Short RX data len, dropping (dlen: 4)

This warning is useful for developers to recognize that the device (Wi-Fi dongle or USB hub etc) is noisy but not for general users. So this patch make this warning to debug message.

Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207539

Fixes cd486e627e67 ("ath9k_htc: Discard undersized packets")
---
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +3 -3
index 0d757ced49ba..91d199481a37 100644
@@ -998,9 +998,9 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	 * which are not PHY_ERROR (short radar pulses have a length of 3)
 	 */
 	if (unlikely(!rs_datalen || (rs_datalen < 10 && !is_phyerr))) {
-		ath_warn(common,
-			 "Short RX data len, dropping (dlen: %d)\n",
-			 rs_datalen);
+		ath_dbg(common, ANY,
+			"Short RX data len, dropping (dlen: %d)\n",
+			rs_datalen);
 		goto rx_next;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#22 lore raw

PATCH 23/37 mips: cm: Fix an invalid error code of INTVN_*_ERR

In reply to Sasha Levin

From: Serge Semin <[email protected]>

[ Upstream commit 8a0efb8b101665a843205eab3d67ab09cb2d9a8d ]

Commit 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors") adds cm2_causes[] array with map of error type ID and pointers to the short description string. There is a mistake in the table, since according to MIPS32 manual CM2_ERROR_TYPE = {17,18} correspond to INTVN_WR_ERR and INTVN_RD_ERR, while the table claims they have {0x17,0x18} codes. This is obviously hex-dec copy-paste bug. Moreover codes {0x18 - 0x1a} indicate L2 ECC errors.

Fixes 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors")
Cc Alexey Malahov <[email protected]>
Cc Thomas Bogendoerfer <[email protected]>
Cc Paul Burton <[email protected]>
Cc Ralf Baechle <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Rob Herring <[email protected]>
---
 arch/mips/kernel/mips-cm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/mips/kernel/mips-cm.c +3 -3
index 76f18c56141c..3458d23d230c 100644
@@ -123,9 +123,9 @@ static char *cm2_causes[32] = {
 	"COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
 	"0x08", "0x09", "0x0a", "0x0b",
 	"0x0c", "0x0d", "0x0e", "0x0f",
-	"0x10", "0x11", "0x12", "0x13",
-	"0x14", "0x15", "0x16", "INTVN_WR_ERR",
-	"INTVN_RD_ERR", "0x19", "0x1a", "0x1b",
+	"0x10", "INTVN_WR_ERR", "INTVN_RD_ERR", "0x13",
+	"0x14", "0x15", "0x16", "0x17",
+	"0x18", "0x19", "0x1a", "0x1b",
 	"0x1c", "0x1d", "0x1e", "0x1f"
 };
 
Signature · 1 line
2.25.1
author maintainer
#23 lore raw

PATCH 24/37 kgdb: Fix spurious true from in_dbg_master()

In reply to Sasha Levin

From: Daniel Thompson <[email protected]>

[ Upstream commit 3fec4aecb311995189217e64d725cfe84a568de3 ]

Currently there is a small window where a badly timed migration could cause in_dbg_master() to spuriously return true. Specifically if we migrate to a new core after reading the processor id and the previous core takes a breakpoint then we will evaluate true if we read kgdb_active before we get the IPI to bring us to halt.

Fix this by checking irqs_disabled() first. Interrupts are always disabled when we are executing the kgdb trap so this is an acceptable prerequisite. This also allows us to replace raw_smp_processor_id() with smp_processor_id() since the short circuit logic will prevent warnings from PREEMPT_DEBUG.

---
 include/linux/kgdb.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/kgdb.h +1 -1
index e465bb15912d..6be5545d3584 100644
@@ -317,7 +317,7 @@ extern void gdbstub_exit(int status);
 extern int			kgdb_single_step;
 extern atomic_t			kgdb_active;
 #define in_dbg_master() \
-	(raw_smp_processor_id() == atomic_read(&kgdb_active))
+	(irqs_disabled() && (smp_processor_id() == atomic_read(&kgdb_active)))
 extern bool dbg_is_early;
 extern void __init dbg_late_init(void);
 #else /* ! CONFIG_KGDB */
Signature · 1 line
2.25.1
author maintainer
#24 lore raw

PATCH 25/37 md: don't flush workqueue unconditionally in md_open

In reply to Sasha Levin

From: Guoqing Jiang <[email protected]>

[ Upstream commit f6766ff6afff70e2aaf39e1511e16d471de7c3ae ]

We need to check mddev->del_work before flush workqueu since the purpose of flush is to ensure the previous md is disappeared. Otherwise the similar deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the bdev->bd_mutex before flush workqueue.

kernel: [ 154.522645] ======================================================
kernel: [ 154.522647] WARNING: possible circular locking dependency detected
kernel: [ 154.522650] 5.6.0-rc7-lp151.27-default #25 Tainted: G O
kernel: [ 154.522651] ------------------------------------------------------
kernel: [ 154.522653] mdadm/2482 is trying to acquire lock:
kernel: [ 154.522655] ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0
kernel: [ 154.522673]
kernel: [ 154.522673] but task is already holding lock:
kernel: [ 154.522675] ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [ 154.522691]
kernel: [ 154.522691] which lock already depends on the new lock.
kernel: [ 154.522691]
kernel: [ 154.522694]
kernel: [ 154.522694] the existing dependency chain (in reverse order) is:
kernel: [ 154.522696]
kernel: [ 154.522696] -> #4 (&bdev->bd_mutex){+.+.}:
kernel: [ 154.522704] __mutex_lock+0x87/0x950
kernel: [ 154.522706] __blkdev_get+0x79/0x590
kernel: [ 154.522708] blkdev_get+0x65/0x140
kernel: [ 154.522709] blkdev_get_by_dev+0x2f/0x40
kernel: [ 154.522716] lock_rdev+0x3d/0x90 [md_mod]
kernel: [ 154.522719] md_import_device+0xd6/0x1b0 [md_mod]
kernel: [ 154.522723] new_dev_store+0x15e/0x210 [md_mod]
kernel: [ 154.522728] md_attr_store+0x7a/0xc0 [md_mod]
kernel: [ 154.522732] kernfs_fop_write+0x117/0x1b0
kernel: [ 154.522735] vfs_write+0xad/0x1a0
kernel: [ 154.522737] ksys_write+0xa4/0xe0
kernel: [ 154.522745] do_syscall_64+0x64/0x2b0
kernel: [ 154.522748] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522749]
kernel: [ 154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}:
kernel: [ 154.522752] __mutex_lock+0x87/0x950
kernel: [ 154.522756] new_dev_store+0xc9/0x210 [md_mod]
kernel: [ 154.522759] md_attr_store+0x7a/0xc0 [md_mod]
kernel: [ 154.522761] kernfs_fop_write+0x117/0x1b0
kernel: [ 154.522763] vfs_write+0xad/0x1a0
kernel: [ 154.522765] ksys_write+0xa4/0xe0
kernel: [ 154.522767] do_syscall_64+0x64/0x2b0
kernel: [ 154.522769] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522770]
kernel: [ 154.522770] -> #2 (kn->count#253){++++}:
kernel: [ 154.522775] __kernfs_remove+0x253/0x2c0
kernel: [ 154.522778] kernfs_remove+0x1f/0x30
kernel: [ 154.522780] kobject_del+0x28/0x60
kernel: [ 154.522783] mddev_delayed_delete+0x24/0x30 [md_mod]
kernel: [ 154.522786] process_one_work+0x2a7/0x5f0
kernel: [ 154.522788] worker_thread+0x2d/0x3d0
kernel: [ 154.522793] kthread+0x117/0x130
kernel: [ 154.522795] ret_from_fork+0x3a/0x50
kernel: [ 154.522796]
kernel: [ 154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}:
kernel: [ 154.522800] process_one_work+0x27e/0x5f0
kernel: [ 154.522802] worker_thread+0x2d/0x3d0
kernel: [ 154.522804] kthread+0x117/0x130
kernel: [ 154.522806] ret_from_fork+0x3a/0x50
kernel: [ 154.522807]
kernel: [ 154.522807] -> #0 ((wq_completion)md_misc){+.+.}:
kernel: [ 154.522813] __lock_acquire+0x1392/0x1690
kernel: [ 154.522816] lock_acquire+0xb4/0x1a0
kernel: [ 154.522818] flush_workqueue+0xab/0x4b0
kernel: [ 154.522821] md_open+0xb6/0xc0 [md_mod]
kernel: [ 154.522823] __blkdev_get+0xea/0x590
kernel: [ 154.522825] blkdev_get+0x65/0x140
kernel: [ 154.522828] do_dentry_open+0x1d1/0x380
kernel: [ 154.522831] path_openat+0x567/0xcc0
kernel: [ 154.522834] do_filp_open+0x9b/0x110
kernel: [ 154.522836] do_sys_openat2+0x201/0x2a0
kernel: [ 154.522838] do_sys_open+0x57/0x80
kernel: [ 154.522840] do_syscall_64+0x64/0x2b0
kernel: [ 154.522842] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522844]
kernel: [ 154.522844] other info that might help us debug this:
kernel: [ 154.522844]
kernel: [ 154.522846] Chain exists of:
kernel: [ 154.522846] (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex
kernel: [ 154.522846]
kernel: [ 154.522850] Possible unsafe locking scenario:
kernel: [ 154.522850]
kernel: [ 154.522852] CPU0 CPU1
kernel: [ 154.522853] ---- ----
kernel: [ 154.522854] lock(&bdev->bd_mutex);
kernel: [ 154.522856] lock(&mddev->reconfig_mutex);
kernel: [ 154.522858] lock(&bdev->bd_mutex);
kernel: [ 154.522860] lock((wq_completion)md_misc);
kernel: [ 154.522861]
kernel: [ 154.522861] *** DEADLOCK ***
kernel: [ 154.522861]
kernel: [ 154.522864] 1 lock held by mdadm/2482:
kernel: [ 154.522865] #0: ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [ 154.522868]
kernel: [ 154.522868] stack backtrace:
kernel: [ 154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G O 5.6.0-rc7-lp151.27-default #25
kernel: [ 154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
kernel: [ 154.522878] Call Trace:
kernel: [ 154.522881] dump_stack+0x8f/0xcb
kernel: [ 154.522884] check_noncircular+0x194/0x1b0
kernel: [ 154.522888] ? __lock_acquire+0x1392/0x1690
kernel: [ 154.522890] __lock_acquire+0x1392/0x1690
kernel: [ 154.522893] lock_acquire+0xb4/0x1a0
kernel: [ 154.522895] ? flush_workqueue+0x84/0x4b0
kernel: [ 154.522898] flush_workqueue+0xab/0x4b0
kernel: [ 154.522900] ? flush_workqueue+0x84/0x4b0
kernel: [ 154.522905] ? md_open+0xb6/0xc0 [md_mod]
kernel: [ 154.522908] md_open+0xb6/0xc0 [md_mod]
kernel: [ 154.522910] __blkdev_get+0xea/0x590
kernel: [ 154.522912] ? bd_acquire+0xc0/0xc0
kernel: [ 154.522914] blkdev_get+0x65/0x140
kernel: [ 154.522916] ? bd_acquire+0xc0/0xc0
kernel: [ 154.522918] do_dentry_open+0x1d1/0x380
kernel: [ 154.522921] path_openat+0x567/0xcc0
kernel: [ 154.522923] ? __lock_acquire+0x380/0x1690
kernel: [ 154.522926] do_filp_open+0x9b/0x110
kernel: [ 154.522929] ? __alloc_fd+0xe5/0x1f0
kernel: [ 154.522935] ? kmem_cache_alloc+0x28c/0x630
kernel: [ 154.522939] ? do_sys_openat2+0x201/0x2a0
kernel: [ 154.522941] do_sys_openat2+0x201/0x2a0
kernel: [ 154.522944] do_sys_open+0x57/0x80
kernel: [ 154.522946] do_syscall_64+0x64/0x2b0
kernel: [ 154.522948] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522951] RIP: 0033:0x7f98d279d9ae

And md_alloc also flushed the same workqueue, but the thing is different here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and the flush is necessary to avoid race condition, so leave it as it is.

---
 drivers/md/md.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/md/md.c +2 -1
index d59d79b77fd6..60161690e226 100644
@@ -7038,7 +7038,8 @@ static int md_open(struct block_device *bdev, fmode_t mode)
 		 */
 		mddev_put(mddev);
 		/* Wait until bdev->bd_disk is definitely gone */
-		flush_workqueue(md_misc_wq);
+		if (work_pending(&mddev->del_work))
+			flush_workqueue(md_misc_wq);
 		/* Then retry the open from the top */
 		return -ERESTARTSYS;
 	}
Signature · 1 line
2.25.1
author maintainer
#25 lore raw

PATCH 26/37 mwifiex: Fix memory corruption in dump_station

In reply to Sasha Levin

From: Pali Rohár <[email protected]>

[ Upstream commit 3aa42bae9c4d1641aeb36f1a8585cd1d506cf471 ]

The mwifiex_cfg80211_dump_station() uses static variable for iterating over a linked list of all associated stations (when the driver is in UAP role). This has a race condition if .dump_station is called in parallel for multiple interfaces. This corruption can be triggered by registering multiple SSIDs and calling, in parallel for multiple interfaces
iw dev <iface> station dump

[16750.719775] Unable to handle kernel paging request at virtual address dead000000000110
...
[16750.899173] Call trace:
[16750.901696]  mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex]
[16750.907824]  nl80211_dump_station+0xbc/0x278 [cfg80211]
[16750.913160]  netlink_dump+0xe8/0x320
[16750.916827]  netlink_recvmsg+0x1b4/0x338
[16750.920861]  ____sys_recvmsg+0x7c/0x2b0
[16750.924801]  ___sys_recvmsg+0x70/0x98
[16750.928564]  __sys_recvmsg+0x58/0xa0
[16750.932238]  __arm64_sys_recvmsg+0x28/0x30
[16750.936453]  el0_svc_common.constprop.3+0x90/0x158
[16750.941378]  do_el0_svc+0x74/0x90
[16750.944784]  el0_sync_handler+0x12c/0x1a8
[16750.948903]  el0_sync+0x114/0x140
[16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060)
[16750.958583] ---[ end trace c8ad181c2f4b8576 ]---

This patch drops the use of the static iterator, and instead every time the function is called iterates to the idx-th position of the linked-list.

It would be better to convert the code not to use linked list for associated stations storage (since the chip has a limited number of associated stations anyway - it could just be an array). Such a change may be proposed in the future. In the meantime this patch can backported into stable kernels in this simple form.

---
 drivers/net/wireless/mwifiex/cfg80211.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/net/wireless/mwifiex/cfg80211.c +6 -8
index c6c2d3304dba..8b649b8e4301 100644
@@ -1387,7 +1387,8 @@ mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 			      int idx, u8 *mac, struct station_info *sinfo)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
-	static struct mwifiex_sta_node *node;
+	struct mwifiex_sta_node *node;
+	int i;
 
 	if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) &&
 	    priv->media_connected && idx == 0) {
@@ -1397,13 +1398,10 @@ mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 		mwifiex_send_cmd(priv, HOST_CMD_APCMD_STA_LIST,
 				 HostCmd_ACT_GEN_GET, 0, NULL, true);
 
-		if (node && (&node->list == &priv->sta_list)) {
-			node = NULL;
-			return -ENOENT;
-		}
-
-		node = list_prepare_entry(node, &priv->sta_list, list);
-		list_for_each_entry_continue(node, &priv->sta_list, list) {
+		i = 0;
+		list_for_each_entry(node, &priv->sta_list, list) {
+			if (i++ != idx)
+				continue;
 			ether_addr_copy(mac, node->mac_addr);
 			return mwifiex_dump_station_info(priv, node, sinfo);
 		}
Signature · 1 line
2.25.1
author maintainer
#26 lore raw

PATCH 27/37 mips: Add udelay lpj numbers adjustment

In reply to Sasha Levin

From: Serge Semin <[email protected]>

[ Upstream commit ed26aacfb5f71eecb20a51c4467da440cb719d66 ]

Loops-per-jiffies is a special number which represents a number of noop-loop cycles per CPU-scheduler quantum - jiffies. As you understand aside from CPU-specific implementation it depends on the CPU frequency. So when a platform has the CPU frequency fixed, we have no problem and the current udelay interface will work just fine. But as soon as CPU-freq driver is enabled and the cores frequency changes, we'll end up with distorted udelay's. In order to fix this we have to accordinly adjust the per-CPU udelay_val (the same as the global loops_per_jiffy) number. This can be done in the CPU-freq transition event handler. We subscribe to that event in the MIPS arch time-inititalization method.

---
 arch/mips/kernel/time.c | 70 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)
arch/mips/kernel/time.c +70 -0
index 8d0170969e22..345978cc105b 100644
@@ -22,12 +22,82 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/export.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
 
 #include <asm/cpu-features.h>
 #include <asm/cpu-type.h>
 #include <asm/div64.h>
 #include <asm/time.h>
 
+#ifdef CONFIG_CPU_FREQ
+
+static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref);
+static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref_freq);
+static unsigned long glb_lpj_ref;
+static unsigned long glb_lpj_ref_freq;
+
+static int cpufreq_callback(struct notifier_block *nb,
+			    unsigned long val, void *data)
+{
+	struct cpufreq_freqs *freq = data;
+	struct cpumask *cpus = freq->policy->cpus;
+	unsigned long lpj;
+	int cpu;
+
+	/*
+	 * Skip lpj numbers adjustment if the CPU-freq transition is safe for
+	 * the loops delay. (Is this possible?)
+	 */
+	if (freq->flags & CPUFREQ_CONST_LOOPS)
+		return NOTIFY_OK;
+
+	/* Save the initial values of the lpjes for future scaling. */
+	if (!glb_lpj_ref) {
+		glb_lpj_ref = boot_cpu_data.udelay_val;
+		glb_lpj_ref_freq = freq->old;
+
+		for_each_online_cpu(cpu) {
+			per_cpu(pcp_lpj_ref, cpu) =
+				cpu_data[cpu].udelay_val;
+			per_cpu(pcp_lpj_ref_freq, cpu) = freq->old;
+		}
+	}
+
+	/*
+	 * Adjust global lpj variable and per-CPU udelay_val number in
+	 * accordance with the new CPU frequency.
+	 */
+	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
+	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) {
+		loops_per_jiffy = cpufreq_scale(glb_lpj_ref,
+						glb_lpj_ref_freq,
+						freq->new);
+
+		for_each_cpu(cpu, cpus) {
+			lpj = cpufreq_scale(per_cpu(pcp_lpj_ref, cpu),
+					    per_cpu(pcp_lpj_ref_freq, cpu),
+					    freq->new);
+			cpu_data[cpu].udelay_val = (unsigned int)lpj;
+		}
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block cpufreq_notifier = {
+	.notifier_call  = cpufreq_callback,
+};
+
+static int __init register_cpufreq_notifier(void)
+{
+	return cpufreq_register_notifier(&cpufreq_notifier,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+core_initcall(register_cpufreq_notifier);
+
+#endif /* CONFIG_CPU_FREQ */
+
 /*
  * forward reference
  */
Signature · 1 line
2.25.1
author maintainer
#27 lore raw

PATCH 28/37 x86/mm: Stop printing BRK addresses

In reply to Sasha Levin

From: Arvind Sankar <[email protected]>

[ Upstream commit 67d631b7c05eff955ccff4139327f0f92a5117e5 ]

This currently leaks kernel physical addresses into userspace.

---
 arch/x86/mm/init.c | 2 --
 1 file changed, 2 deletions(-)
arch/x86/mm/init.c +0 -2
index f00eb52c16a6..17eb564901ca 100644
@@ -109,8 +109,6 @@ __ref void *alloc_low_pages(unsigned int num)
 	} else {
 		pfn = pgt_buf_end;
 		pgt_buf_end += num;
-		printk(KERN_DEBUG "BRK [%#010lx, %#010lx] PGTABLE\n",
-			pfn << PAGE_SHIFT, (pgt_buf_end << PAGE_SHIFT) - 1);
 	}
 
 	for (i = 0; i < num; i++) {
Signature · 1 line
2.25.1
author maintainer
#28 lore raw

PATCH 29/37 m68k: mac: Don't call via_flush_cache() on Mac IIfx

In reply to Sasha Levin

From: Finn Thain <[email protected]>

[ Upstream commit bcc44f6b74106b31f0b0408b70305a40360d63b7 ]

There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache(). This avoids a boot crash which appeared in v5.4.

printk: console [ttyS0] enabled
printk: bootconsole [debug0] disabled
printk: bootconsole [debug0] disabled
Calibrating delay loop... 9.61 BogoMIPS (lpj=48064)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
devtmpfs: initialized
random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear)
NET: Registered protocol family 16
Data read fault at 0x00000000 in Super Data (pc=0x8a6a)
BAD KERNEL BUSERR

Oops: 00000000
Modules linked in:
PC: [<00008a6a>] via_flush_cache+0x12/0x2c
SR: 2700  SP: 01c1fe3c  a2: 01c24000
d0: 00001119    d1: 0000000c    d2: 00012000    d3: 0000000f
d4: 01c06840    d5: 00033b92    a0: 00000000    a1: 00000000

Process swapper (pid: 1, task=01c24000)
Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0 baddr=00008a6e dibuf=0000004e ver=f
Stack from 01c1fec4:

        01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40
        01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000
        00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2
        00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88
        004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4
        0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000
Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c
 [<00010080>] fix_dnrm+0x2/0x18
 [<0000792e>] cache_push+0x46/0x5a
 [<00006b40>] arch_dma_prep_coherent+0x60/0x6e
 [<00040000>] switched_to_dl+0x76/0xd0
 [<004a545e>] dma_atomic_pool_init+0x4e/0x188
 [<00040000>] switched_to_dl+0x76/0xd0
 [<00033b92>] parse_args+0x0/0x370
 [<004a5410>] dma_atomic_pool_init+0x0/0x188
 [<000021e2>] do_one_initcall+0x34/0x1be
 [<00033b92>] parse_args+0x0/0x370
 [<0038507a>] strcpy+0x0/0x1e
 [<000021ae>] do_one_initcall+0x0/0x1be
 [<00020002>] do_proc_dointvec_conv+0x54/0x74
 [<0049f938>] kernel_init_freeable+0x126/0x190
 [<0049f94c>] kernel_init_freeable+0x13a/0x190
 [<004a5410>] dma_atomic_pool_init+0x0/0x188
 [<00041798>] complete+0x0/0x3c
 [<000b9b0c>] kfree+0x0/0x20a
 [<0038df98>] schedule+0x0/0xd0
 [<0038d604>] kernel_init+0x0/0xda
 [<0038d610>] kernel_init+0xc/0xda
 [<0038d604>] kernel_init+0x0/0xda
 [<00002d38>] ret_from_kernel_thread+0xc/0x14
Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Thanks to Stan Johnson for capturing the console log and running git bisect.

Git bisect said commit 8e3a68fb55e0 ("dma-mapping: make dma_atomic_pool_init self-contained") is the first "bad" commit. I don't know why. Perhaps mach_l2_flush first became reachable with that commit.

---
 arch/m68k/include/asm/mac_via.h |  1 +
 arch/m68k/mac/config.c          | 21 ++-------------------
 arch/m68k/mac/via.c             |  6 +++++-
 3 files changed, 8 insertions(+), 20 deletions(-)
arch/m68k/include/asm/mac_via.h +1 -0
index 53c632c85b03..dff6db19ae4d 100644
@@ -256,6 +256,7 @@ extern int rbv_present,via_alt_mapping;
 
 struct irq_desc;
 
+extern void via_l2_flush(int writeback);
 extern void via_register_interrupts(void);
 extern void via_irq_enable(int);
 extern void via_irq_disable(int);
arch/m68k/mac/config.c +2 -19
index 689b47d292ac..c4be82cc07df 100644
@@ -60,7 +60,6 @@ extern void iop_preinit(void);
 extern void iop_init(void);
 extern void via_init(void);
 extern void via_init_clock(irq_handler_t func);
-extern void via_flush_cache(void);
 extern void oss_init(void);
 extern void psc_init(void);
 extern void baboon_init(void);
@@ -131,21 +130,6 @@ int __init mac_parse_bootinfo(const struct bi_record *record)
 	return unknown;
 }
 
-/*
- * Flip into 24bit mode for an instant - flushes the L2 cache card. We
- * have to disable interrupts for this. Our IRQ handlers will crap
- * themselves if they take an IRQ in 24bit mode!
- */
-
-static void mac_cache_card_flush(int writeback)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	via_flush_cache();
-	local_irq_restore(flags);
-}
-
 void __init config_mac(void)
 {
 	if (!MACH_IS_MAC)
@@ -178,9 +162,8 @@ void __init config_mac(void)
 	 * not.
 	 */
 
-	if (macintosh_config->ident == MAC_MODEL_IICI
-	    || macintosh_config->ident == MAC_MODEL_IIFX)
-		mach_l2_flush = mac_cache_card_flush;
+	if (macintosh_config->ident == MAC_MODEL_IICI)
+		mach_l2_flush = via_l2_flush;
 }
 
 
arch/m68k/mac/via.c +5 -1
index 49f9fa4529a8..b4c40ed2099a 100644
@@ -299,10 +299,14 @@ void via_debug_dump(void)
  * the system into 24-bit mode for an instant.
  */
 
-void via_flush_cache(void)
+void via_l2_flush(int writeback)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	via2[gBufB] &= ~VIA2B_vMode32;
 	via2[gBufB] |= VIA2B_vMode32;
+	local_irq_restore(flags);
 }
 
 /*
Signature · 1 line
2.25.1
author maintainer
#29 lore raw

PATCH 30/37 macvlan: Skip loopback packets in RX handler

In reply to Sasha Levin

From: Alexander Sverdlin <[email protected]>

[ Upstream commit 81f3dc9349ce0bf7b8447f147f45e70f0a5b36a6 ]

Ignore loopback-originatig packets soon enough and don't try to process L2 header where it doesn't exist. The very similar br_handle_frame() in bridge code performs exactly the same check.

This is an example of such ICMPv6 packet:

skb len=96 headroom=40 headlen=96 tailroom=56 mac=(40,0) net=(40,40) trans=80
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0xae2e9a2f ip_summed=1 complete_sw=0 valid=0 level=0) hash(0xc97ebd88 sw=1 l4=1) proto=0x86dd pkttype=5 iif=24 dev name=etha01.212 feat=0x0x0000000040005000

skb headroom: 00000000: 00 7c 86 52 84 88 ff ff 00 00 00 00 00 00 08 00
skb headroom: 00000010: 45 00 00 9e 5d 5c 40 00 40 11 33 33 00 00 00 01
skb headroom: 00000020: 02 40 43 80 00 00 86 dd
skb linear:   00000000: 60 09 88 bd 00 38 3a ff fe 80 00 00 00 00 00 00
skb linear:   00000010: 00 40 43 ff fe 80 00 00 ff 02 00 00 00 00 00 00
skb linear:   00000020: 00 00 00 00 00 00 00 01 86 00 61 00 40 00 00 2d
skb linear:   00000030: 00 00 00 00 00 00 00 00 03 04 40 e0 00 00 01 2c
skb linear:   00000040: 00 00 00 78 00 00 00 00 fd 5f 42 68 23 87 a8 81
skb linear:   00000050: 00 00 00 00 00 00 00 00 01 01 02 40 43 80 00 00
skb tailroom: 00000000: ...
skb tailroom: 00000010: ...
skb tailroom: 00000020: ...
skb tailroom: 00000030: ...

Call Trace, how it happens exactly:
...

 macvlan_handle_frame+0x321/0x425 [macvlan]
 ? macvlan_forward_source+0x110/0x110 [macvlan]
 __netif_receive_skb_core+0x545/0xda0
 ? enqueue_task_fair+0xe5/0x8e0
 ? __netif_receive_skb_one_core+0x36/0x70
 __netif_receive_skb_one_core+0x36/0x70
 process_backlog+0x97/0x140
 net_rx_action+0x1eb/0x350
 ? __hrtimer_run_queues+0x136/0x2e0
 __do_softirq+0xe3/0x383
 do_softirq_own_stack+0x2a/0x40
 </IRQ>
 do_softirq.part.4+0x4e/0x50
 netif_rx_ni+0x60/0xd0
 dev_loopback_xmit+0x83/0xf0
 ip6_finish_output2+0x575/0x590 [ipv6]
 ? ip6_cork_release.isra.1+0x64/0x90 [ipv6]
 ? __ip6_make_skb+0x38d/0x680 [ipv6]
 ? ip6_output+0x6c/0x140 [ipv6]
 ip6_output+0x6c/0x140 [ipv6]
 ip6_send_skb+0x1e/0x60 [ipv6]
 rawv6_sendmsg+0xc4b/0xe10 [ipv6]
 ? proc_put_long+0xd0/0xd0
 ? rw_copy_check_uvector+0x4e/0x110
 ? sock_sendmsg+0x36/0x40
 sock_sendmsg+0x36/0x40
 ___sys_sendmsg+0x2b6/0x2d0
 ? proc_dointvec+0x23/0x30
 ? addrconf_sysctl_forward+0x8d/0x250 [ipv6]
 ? dev_forward_change+0x130/0x130 [ipv6]
 ? _raw_spin_unlock+0x12/0x30
 ? proc_sys_call_handler.isra.14+0x9f/0x110
 ? __call_rcu+0x213/0x510
 ? get_max_files+0x10/0x10
 ? trace_hardirqs_on+0x2c/0xe0
 ? __sys_sendmsg+0x63/0xa0
 __sys_sendmsg+0x63/0xa0
 do_syscall_64+0x6c/0x1e0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
---
 drivers/net/macvlan.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/macvlan.c +4 -0
index 0c4e1ef80355..73061bee35cd 100644
@@ -420,6 +420,10 @@ static rx_handler_result_t macvlan_handle_frame(struct sk_buff **pskb)
 	int ret;
 	rx_handler_result_t handle_res;
 
+	/* Packets from dev_loopback_xmit() do not have L2 header, bail out */
+	if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
+		return RX_HANDLER_PASS;
+
 	port = macvlan_port_get_rcu(skb->dev);
 	if (is_multicast_ether_addr(eth->h_dest)) {
 		skb = ip_check_defrag(dev_net(skb->dev), skb, IP_DEFRAG_MACVLAN);
Signature · 1 line
2.25.1
author maintainer
#30 lore raw

PATCH 31/37 PCI: Don't disable decoding when mmio_always_on is set

In reply to Sasha Levin

From: Jiaxun Yang <[email protected]>

[ Upstream commit b6caa1d8c80cb71b6162cb1f1ec13aa655026c9f ]

Don't disable MEM/IO decoding when a device have both non_compliant_bars and mmio_always_on.

That would allow us quirk devices with junk in BARs but can't disable their decoding.

---
 drivers/pci/probe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/probe.c +1 -1
index 5f040619393f..46656322d23e 100644
@@ -1226,7 +1226,7 @@ int pci_setup_device(struct pci_dev *dev)
 	/* device class may be changed after fixup */
 	class = dev->class >> 8;
 
-	if (dev->non_compliant_bars) {
+	if (dev->non_compliant_bars && !dev->mmio_always_on) {
 		pci_read_config_word(dev, PCI_COMMAND, &cmd);
 		if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
 			dev_info(&dev->dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
Signature · 1 line
2.25.1
author maintainer
#31 lore raw

PATCH 32/37 MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()

In reply to Sasha Levin

From: YuanJunQing <[email protected]>

[ Upstream commit 31e1b3efa802f97a17628dde280006c4cee4ce5e ]

Register "a1" is unsaved in this function,
when CONFIG_TRACE_IRQFLAGS is enabled,
the TRACE_IRQS_OFF macro will call trace_hardirqs_off(), and this may change register "a1".
The changed register "a1" as argument will be send to do_fpe() and do_msa_fpe().

---
 arch/mips/kernel/genex.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/mips/kernel/genex.S +3 -3
index bb72f3ce7e29..7ffd158de76e 100644
@@ -430,20 +430,20 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	.endm
 
 	.macro	__build_clear_fpe
+	CLI
+	TRACE_IRQS_OFF
 	.set	push
 	/* gas fails to assemble cfc1 for some archs (octeon).*/ \
 	.set	mips1
 	SET_HARDFLOAT
 	cfc1	a1, fcr31
 	.set	pop
-	CLI
-	TRACE_IRQS_OFF
 	.endm
 
 	.macro	__build_clear_msa_fpe
-	_cfcmsa	a1, MSA_CSR
 	CLI
 	TRACE_IRQS_OFF
+	_cfcmsa	a1, MSA_CSR
 	.endm
 
 	.macro	__build_clear_ade
Signature · 1 line
2.25.1
author maintainer
#32 lore raw

PATCH 33/37 xfs: gut error handling in xfs_trans_unreserve_and_mod_sb()

In reply to Sasha Levin

From: Dave Chinner <[email protected]>

[ Upstream commit dc3ffbb14060c943469d5e12900db3a60bc3fa64 ]

xfs: gut error handling in xfs_trans_unreserve_and_mod_sb()

From: Dave Chinner <[email protected]>

The error handling in xfs_trans_unreserve_and_mod_sb() is largely incorrect - rolling back the changes in the transaction if only one counter underruns makes all the other counters incorrect. We still allow the change to proceed and committing the transaction, except now we have multiple incorrect counters instead of a single underflow.

Further, we don't actually report the error to the caller, so this is completely silent except on debug kernels that will assert on failure before we even get to the rollback code. Hence this error handling is broken, untested, and largely unnecessary complexity.

Just remove it.

---
 fs/xfs/xfs_trans.c | 163 ++++++---------------------------------------
 1 file changed, 20 insertions(+), 143 deletions(-)
fs/xfs/xfs_trans.c +20 -143
index 748b16aff45a..921fd09d019d 100644
@@ -478,57 +478,9 @@ xfs_trans_apply_sb_deltas(
 				  sizeof(sbp->sb_frextents) - 1);
 }
 
-STATIC int
-xfs_sb_mod8(
-	uint8_t			*field,
-	int8_t			delta)
-{
-	int8_t			counter = *field;
-
-	counter += delta;
-	if (counter < 0) {
-		ASSERT(0);
-		return -EINVAL;
-	}
-	*field = counter;
-	return 0;
-}
-
-STATIC int
-xfs_sb_mod32(
-	uint32_t		*field,
-	int32_t			delta)
-{
-	int32_t			counter = *field;
-
-	counter += delta;
-	if (counter < 0) {
-		ASSERT(0);
-		return -EINVAL;
-	}
-	*field = counter;
-	return 0;
-}
-
-STATIC int
-xfs_sb_mod64(
-	uint64_t		*field,
-	int64_t			delta)
-{
-	int64_t			counter = *field;
-
-	counter += delta;
-	if (counter < 0) {
-		ASSERT(0);
-		return -EINVAL;
-	}
-	*field = counter;
-	return 0;
-}
-
 /*
- * xfs_trans_unreserve_and_mod_sb() is called to release unused reservations
- * and apply superblock counter changes to the in-core superblock.  The
+ * xfs_trans_unreserve_and_mod_sb() is called to release unused reservations and
+ * apply superblock counter changes to the in-core superblock.  The
  * t_res_fdblocks_delta and t_res_frextents_delta fields are explicitly NOT
  * applied to the in-core superblock.  The idea is that that has already been
  * done.
@@ -573,20 +525,17 @@ xfs_trans_unreserve_and_mod_sb(
 	/* apply the per-cpu counters */
 	if (blkdelta) {
 		error = xfs_mod_fdblocks(mp, blkdelta, rsvd);
-		if (error)
-			goto out;
+		ASSERT(!error);
 	}
 
 	if (idelta) {
 		error = xfs_mod_icount(mp, idelta);
-		if (error)
-			goto out_undo_fdblocks;
+		ASSERT(!error);
 	}
 
 	if (ifreedelta) {
 		error = xfs_mod_ifree(mp, ifreedelta);
-		if (error)
-			goto out_undo_icount;
+		ASSERT(!error);
 	}
 
 	if (rtxdelta == 0 && !(tp->t_flags & XFS_TRANS_SB_DIRTY))
@@ -594,95 +543,23 @@ xfs_trans_unreserve_and_mod_sb(
 
 	/* apply remaining deltas */
 	spin_lock(&mp->m_sb_lock);
-	if (rtxdelta) {
-		error = xfs_sb_mod64(&mp->m_sb.sb_frextents, rtxdelta);
-		if (error)
-			goto out_undo_ifree;
-	}
-
-	if (tp->t_dblocks_delta != 0) {
-		error = xfs_sb_mod64(&mp->m_sb.sb_dblocks, tp->t_dblocks_delta);
-		if (error)
-			goto out_undo_frextents;
-	}
-	if (tp->t_agcount_delta != 0) {
-		error = xfs_sb_mod32(&mp->m_sb.sb_agcount, tp->t_agcount_delta);
-		if (error)
-			goto out_undo_dblocks;
-	}
-	if (tp->t_imaxpct_delta != 0) {
-		error = xfs_sb_mod8(&mp->m_sb.sb_imax_pct, tp->t_imaxpct_delta);
-		if (error)
-			goto out_undo_agcount;
-	}
-	if (tp->t_rextsize_delta != 0) {
-		error = xfs_sb_mod32(&mp->m_sb.sb_rextsize,
-				     tp->t_rextsize_delta);
-		if (error)
-			goto out_undo_imaxpct;
-	}
-	if (tp->t_rbmblocks_delta != 0) {
-		error = xfs_sb_mod32(&mp->m_sb.sb_rbmblocks,
-				     tp->t_rbmblocks_delta);
-		if (error)
-			goto out_undo_rextsize;
-	}
-	if (tp->t_rblocks_delta != 0) {
-		error = xfs_sb_mod64(&mp->m_sb.sb_rblocks, tp->t_rblocks_delta);
-		if (error)
-			goto out_undo_rbmblocks;
-	}
-	if (tp->t_rextents_delta != 0) {
-		error = xfs_sb_mod64(&mp->m_sb.sb_rextents,
-				     tp->t_rextents_delta);
-		if (error)
-			goto out_undo_rblocks;
-	}
-	if (tp->t_rextslog_delta != 0) {
-		error = xfs_sb_mod8(&mp->m_sb.sb_rextslog,
-				     tp->t_rextslog_delta);
-		if (error)
-			goto out_undo_rextents;
-	}
+	mp->m_sb.sb_frextents += rtxdelta;
+	mp->m_sb.sb_dblocks += tp->t_dblocks_delta;
+	mp->m_sb.sb_agcount += tp->t_agcount_delta;
+	mp->m_sb.sb_imax_pct += tp->t_imaxpct_delta;
+	mp->m_sb.sb_rextsize += tp->t_rextsize_delta;
+	mp->m_sb.sb_rbmblocks += tp->t_rbmblocks_delta;
+	mp->m_sb.sb_rblocks += tp->t_rblocks_delta;
+	mp->m_sb.sb_rextents += tp->t_rextents_delta;
+	mp->m_sb.sb_rextslog += tp->t_rextslog_delta;
 	spin_unlock(&mp->m_sb_lock);
-	return;
 
-out_undo_rextents:
-	if (tp->t_rextents_delta)
-		xfs_sb_mod64(&mp->m_sb.sb_rextents, -tp->t_rextents_delta);
-out_undo_rblocks:
-	if (tp->t_rblocks_delta)
-		xfs_sb_mod64(&mp->m_sb.sb_rblocks, -tp->t_rblocks_delta);
-out_undo_rbmblocks:
-	if (tp->t_rbmblocks_delta)
-		xfs_sb_mod32(&mp->m_sb.sb_rbmblocks, -tp->t_rbmblocks_delta);
-out_undo_rextsize:
-	if (tp->t_rextsize_delta)
-		xfs_sb_mod32(&mp->m_sb.sb_rextsize, -tp->t_rextsize_delta);
-out_undo_imaxpct:
-	if (tp->t_rextsize_delta)
-		xfs_sb_mod8(&mp->m_sb.sb_imax_pct, -tp->t_imaxpct_delta);
-out_undo_agcount:
-	if (tp->t_agcount_delta)
-		xfs_sb_mod32(&mp->m_sb.sb_agcount, -tp->t_agcount_delta);
-out_undo_dblocks:
-	if (tp->t_dblocks_delta)
-		xfs_sb_mod64(&mp->m_sb.sb_dblocks, -tp->t_dblocks_delta);
-out_undo_frextents:
-	if (rtxdelta)
-		xfs_sb_mod64(&mp->m_sb.sb_frextents, -rtxdelta);
-out_undo_ifree:
-	spin_unlock(&mp->m_sb_lock);
-	if (ifreedelta)
-		xfs_mod_ifree(mp, -ifreedelta);
-out_undo_icount:
-	if (idelta)
-		xfs_mod_icount(mp, -idelta);
-out_undo_fdblocks:
-	if (blkdelta)
-		xfs_mod_fdblocks(mp, -blkdelta, rsvd);
-out:
-	ASSERT(error == 0);
+	/*
+	 * Debug checks outside of the spinlock so they don't lock up the
+	 * machine if they fail.
+	 */
+	ASSERT(mp->m_sb.sb_imax_pct >= 0);
+	ASSERT(mp->m_sb.sb_rextslog >= 0);
 	return;
 }
 
Signature · 1 line
2.25.1
author maintainer
#33 lore raw

PATCH 34/37 ixgbe: fix signed-integer-overflow warning

In reply to Sasha Levin

From: Xie XiuQi <[email protected]>

[ Upstream commit 3b70683fc4d68f5d915d9dc7e5ba72c732c7315c ]

ubsan report this warning, fix it by adding a unsigned suffix.

UBSAN: signed-integer-overflow in
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:2246:26
65535 * 65537 cannot be represented in type 'int'
CPU: 21 PID: 7 Comm: kworker/u256:0 Not tainted 5.7.0-rc3-debug+ #39
Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 03/27/2020
Workqueue: ixgbe ixgbe_service_task [ixgbe]
Call trace:
 dump_backtrace+0x0/0x3f0
 show_stack+0x28/0x38
 dump_stack+0x154/0x1e4
 ubsan_epilogue+0x18/0x60
 handle_overflow+0xf8/0x148
 __ubsan_handle_mul_overflow+0x34/0x48
 ixgbe_fc_enable_generic+0x4d0/0x590 [ixgbe]
 ixgbe_service_task+0xc20/0x1f78 [ixgbe]
 process_one_work+0x8f0/0xf18
 worker_thread+0x430/0x6d0
 kthread+0x218/0x238
 ret_from_fork+0x10/0x18
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +1 -1
index cd2afe92f1da..e10808b3d118 100644
@@ -2185,7 +2185,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
 	}
 
 	/* Configure pause time (2 TCs per register) */
-	reg = hw->fc.pause_time * 0x00010001;
+	reg = hw->fc.pause_time * 0x00010001U;
 	for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
 		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
 
Signature · 1 line
2.25.1
author maintainer
#34 lore raw

PATCH 35/37 spi: dw: Return any value retrieved from the dma_transfer callback

In reply to Sasha Levin

From: Serge Semin <[email protected]>

[ Upstream commit f0410bbf7d0fb80149e3b17d11d31f5b5197873e ]

DW APB SSI DMA-part of the driver may need to perform the requested SPI-transfer synchronously. In that case the dma_transfer() callback will return 0 as a marker of the SPI transfer being finished so the SPI core doesn't need to wait and may proceed with the SPI message trasnfers pumping procedure. This will be needed to fix the problem when DMA transactions are finished, but there is still data left in the SPI Tx/Rx FIFOs being sent/received. But for now make dma_transfer to return 1 as the normal dw_spi_transfer_one() method.

---
 drivers/spi/spi-dw-mid.c | 2 +-
 drivers/spi/spi-dw.c     | 7 ++-----
 2 files changed, 3 insertions(+), 6 deletions(-)
drivers/spi/spi-dw-mid.c +1 -1
index bd116f117b02..14902efae621 100644
@@ -274,7 +274,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer)
 		dma_async_issue_pending(dws->txchan);
 	}
 
-	return 0;
+	return 1;
 }
 
 static void mid_spi_dma_stop(struct dw_spi *dws)
drivers/spi/spi-dw.c +2 -5
index 4edd38d03b93..3667f8860aaf 100644
@@ -382,11 +382,8 @@ static int dw_spi_transfer_one(struct spi_master *master,
 
 	spi_enable_chip(dws, 1);
 
-	if (dws->dma_mapped) {
-		ret = dws->dma_ops->dma_transfer(dws, transfer);
-		if (ret < 0)
-			return ret;
-	}
+	if (dws->dma_mapped)
+		return dws->dma_ops->dma_transfer(dws, transfer);
 
 	if (chip->poll_mode)
 		return poll_transfer(dws);
Signature · 1 line
2.25.1
author maintainer
#35 lore raw

PATCH 36/37 cpuidle: Fix three reference count leaks

In reply to Sasha Levin

From: Qiushi Wu <[email protected]>

[ Upstream commit c343bf1ba5efcbf2266a1fe3baefec9cc82f867f ]

kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object.

Previous commit "b8eb718348b8" fixed a similar problem.

---
 drivers/cpuidle/sysfs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/cpuidle/sysfs.c +3 -3
index 9e98a5fbbc1d..e7e92ed34f0c 100644
@@ -412,7 +412,7 @@ static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
 		ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle,
 					   &kdev->kobj, "state%d", i);
 		if (ret) {
-			kfree(kobj);
+			kobject_put(&kobj->kobj);
 			goto error_state;
 		}
 		kobject_uevent(&kobj->kobj, KOBJ_ADD);
@@ -542,7 +542,7 @@ static int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
 	ret = kobject_init_and_add(&kdrv->kobj, &ktype_driver_cpuidle,
 				   &kdev->kobj, "driver");
 	if (ret) {
-		kfree(kdrv);
+		kobject_put(&kdrv->kobj);
 		return ret;
 	}
 
@@ -636,7 +636,7 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
 	error = kobject_init_and_add(&kdev->kobj, &ktype_cpuidle, &cpu_dev->kobj,
 				   "cpuidle");
 	if (error) {
-		kfree(kdev);
+		kobject_put(&kdev->kobj);
 		return error;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#36 lore raw

PATCH 37/37 vxlan: Avoid infinite loop when suppressing NS messages with invalid options

In reply to Sasha Levin

From: Ido Schimmel <[email protected]>

[ Upstream commit 8066e6b449e050675df48e7c4b16c29f00507ff0 ]

When proxy mode is enabled the vxlan device might reply to Neighbor Solicitation (NS) messages on behalf of remote hosts.

In case the NS message includes the "Source link-layer address" option [1], the vxlan device will use the specified address as the link-layer destination address in its reply.

To avoid an infinite loop, break out of the options parsing loop when encountering an option with length zero and disregard the NS message.

This is consistent with the IPv6 ndisc code and RFC 4886 which states that "Nodes MUST silently discard an ND packet that contains an option with length zero" [2].

[1] https://tools.ietf.org/html/rfc4861#section-4.3
[2] https://tools.ietf.org/html/rfc4861#section-4.6

Fixes 4b29dba9c085 ("vxlan: fix nonfunctional neigh_reduce()")
---
 drivers/net/vxlan.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/vxlan.c +4 -0
index d6ae6d3c98ed..c12f2984d7ef 100644
@@ -1476,6 +1476,10 @@ static struct sk_buff *vxlan_na_create(struct sk_buff *request,
 	daddr = eth_hdr(request)->h_source;
 	ns_olen = request->len - skb_transport_offset(request) - sizeof(*ns);
 	for (i = 0; i < ns_olen-1; i += (ns->opt[i+1]<<3)) {
+		if (!ns->opt[i + 1]) {
+			kfree_skb(reply);
+			return NULL;
+		}
 		if (ns->opt[i] == ND_OPT_SOURCE_LL_ADDR) {
 			daddr = ns->opt + i + sizeof(struct nd_opt_hdr);
 			break;
Signature · 1 line
2.25.1