4.4.227-rc1 review

This is the start of the stable review cycle for the 4.4.227 release. There are 36 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 11 Jun 2020 17:39:17 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.227-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.4.227-rc1

Oleg Nesterov <[email protected]>

    uprobes: ensure that uprobe->offset and ->ref_ctr_offset are properly aligned

Mathieu Othacehe <[email protected]>
iio: vcnl4000: Fix i2c swapped word reading.

Josh Poimboeuf <[email protected]>
x86/speculation: Add Ivy Bridge to affected list

Mark Gross <[email protected]>
x86/speculation: Add SRBDS vulnerability and mitigation documentation

Mark Gross <[email protected]>
x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation

Mark Gross <[email protected]>
x86/cpu: Add 'table' argument to cpu_matches()

Mark Gross <[email protected]>
x86/cpu: Add a steppings field to struct x86_cpu_id

Jia Zhang <[email protected]>
x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping

Pascal Terjan <[email protected]>

    staging: rtl8712: Fix IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK

Dmitry Torokhov <[email protected]>
vt: keyboard: avoid signed integer overflow in k_ascii

Daniele Palmas <[email protected]>
USB: serial: option: add Telit LE910C1-EUX compositions

Bin Liu <[email protected]>
USB: serial: usb_wwan: do not resubmit rx urb on fatal errors

Matt Jolly <[email protected]>
USB: serial: qcserial: add DW5816e QDL support

Eric Dumazet <[email protected]>
l2tp: do not use inet_hash()/inet_unhash()

Eric Dumazet <[email protected]>
l2tp: add sk_family checks to l2tp_validate_socket

Stefano Garzarella <[email protected]>
vsock: fix timeout in vsock_accept()

Chuhong Yuan <[email protected]>
NFC: st21nfca: add missed kfree_skb() in an error path

Yang Yingliang <[email protected]>
devinet: fix memleak in inetdev_init()

Can Guo <[email protected]>
scsi: ufs: Release clock if DMA map fails

yangerkun <[email protected]>
slip: not call free_netdev before rtnl_unlock in slip_open

Ben Hutchings <[email protected]>
slcan: Fix double-free on slcan_open() error path

Jérôme Pouiller <[email protected]>
mmc: fix compilation of user API

Guillaume Nault <[email protected]>
pppoe: only process PADT targeted at local interfaces

Jonathan McDowell <[email protected]>
net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x

Valentin Longchamp <[email protected]>
net/ethernet/freescale: rework quiesce/activate for ucc_geth

Jeremy Kerr <[email protected]>
net: bmac: Fix read of MAC address from ROM

Nathan Chancellor <[email protected]>
x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables

Eugeniy Paltsev <[email protected]>
ARC: Fix ICCM & DCCM runtime size checks

Vasily Gorbik <[email protected]>
s390/ftrace: save traced function caller

Xinwei Kong <[email protected]>
spi: dw: use "smp_mb()" to avoid sending spi data error

Takashi Iwai <[email protected]>
ALSA: hda - No loopback on ALC299 codec

Christophe Jaillet <[email protected]>
IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'

Zhen Lei <[email protected]>
esp6: fix memleak on error path in esp6_input

Lee, Chun-Yi <[email protected]>
platform/x86: acer-wmi: setup accelerometer when ACPI device was found

Eugeniu Rosca <[email protected]>
usb: gadget: f_uac2: fix error handling in afunc_bind (again)

Hannes Reinecke <[email protected]>
scsi: scsi_devinfo: fixup string compare

-------------

Diffstat:

 Documentation/ABI/testing/sysfs-devices-system-cpu |   1 +
 .../special-register-buffer-data-sampling.rst      | 149 +++++++++++++++++++++
 Documentation/kernel-parameters.txt                |  20 +++
 Makefile                                           |   4 +-
 arch/arc/kernel/setup.c                            |   5 +-
 arch/s390/kernel/mcount.S                          |   1 +
 arch/x86/include/asm/acpi.h                        |   2 +-
 arch/x86/include/asm/cpu_device_id.h               |  27 ++++
 arch/x86/include/asm/cpufeatures.h                 |   2 +
 arch/x86/include/asm/msr-index.h                   |   4 +
 arch/x86/include/asm/processor.h                   |   2 +-
 arch/x86/kernel/amd_nb.c                           |   2 +-
 arch/x86/kernel/asm-offsets_32.c                   |   2 +-
 arch/x86/kernel/cpu/amd.c                          |  26 ++--
 arch/x86/kernel/cpu/bugs.c                         | 106 +++++++++++++++
 arch/x86/kernel/cpu/centaur.c                      |   4 +-
 arch/x86/kernel/cpu/common.c                       |  62 +++++++--
 arch/x86/kernel/cpu/cpu.h                          |   1 +
 arch/x86/kernel/cpu/cyrix.c                        |   2 +-
 arch/x86/kernel/cpu/intel.c                        |  20 +--
 arch/x86/kernel/cpu/match.c                        |   7 +-
 arch/x86/kernel/cpu/microcode/intel.c              |   4 +-
 arch/x86/kernel/cpu/mtrr/generic.c                 |   2 +-
 arch/x86/kernel/cpu/mtrr/main.c                    |   4 +-
 arch/x86/kernel/cpu/perf_event_intel.c             |   2 +-
 arch/x86/kernel/cpu/perf_event_intel_lbr.c         |   2 +-
 arch/x86/kernel/cpu/perf_event_p6.c                |   2 +-
 arch/x86/kernel/cpu/proc.c                         |   4 +-
 arch/x86/kernel/head_32.S                          |   4 +-
 arch/x86/kernel/mpparse.c                          |   2 +-
 arch/x86/mm/mmio-mod.c                             |   4 +-
 drivers/base/cpu.c                                 |   8 ++
 drivers/char/hw_random/via-rng.c                   |   2 +-
 drivers/cpufreq/acpi-cpufreq.c                     |   2 +-
 drivers/cpufreq/longhaul.c                         |   6 +-
 drivers/cpufreq/p4-clockmod.c                      |   2 +-
 drivers/cpufreq/powernow-k7.c                      |   2 +-
 drivers/cpufreq/speedstep-centrino.c               |   4 +-
 drivers/cpufreq/speedstep-lib.c                    |   6 +-
 drivers/crypto/padlock-aes.c                       |   2 +-
 drivers/edac/amd64_edac.c                          |   2 +-
 drivers/edac/mce_amd.c                             |   2 +-
 drivers/hwmon/coretemp.c                           |   6 +-
 drivers/hwmon/hwmon-vid.c                          |   2 +-
 drivers/hwmon/k10temp.c                            |   2 +-
 drivers/hwmon/k8temp.c                             |   2 +-
 drivers/iio/light/vcnl4000.c                       |   6 +-
 drivers/infiniband/hw/mlx4/mr.c                    |   7 +-
 drivers/net/can/slcan.c                            |   3 +-
 drivers/net/ethernet/apple/bmac.c                  |   2 +-
 drivers/net/ethernet/freescale/ucc_geth.c          |  13 +-
 .../net/ethernet/stmicro/stmmac/dwmac-ipq806x.c    |  13 ++
 drivers/net/ppp/pppoe.c                            |   3 +
 drivers/net/slip/slip.c                            |   3 +
 drivers/nfc/st21nfca/dep.c                         |   4 +-
 drivers/platform/x86/acer-wmi.c                    |   9 +-
 drivers/scsi/scsi_devinfo.c                        |  23 ++--
 drivers/scsi/ufs/ufshcd.c                          |   1 +
 drivers/spi/spi-dw.c                               |   3 +
 drivers/staging/rtl8712/wifi.h                     |   9 +-
 drivers/tty/vt/keyboard.c                          |  26 ++--
 drivers/usb/gadget/function/f_uac2.c               |   4 +-
 drivers/usb/serial/option.c                        |   4 +
 drivers/usb/serial/qcserial.c                      |   1 +
 drivers/usb/serial/usb_wwan.c                      |   4 +
 drivers/video/fbdev/geode/video_gx.c               |   2 +-
 include/linux/mod_devicetable.h                    |   6 +
 include/uapi/linux/mmc/ioctl.h                     |   1 +
 kernel/events/uprobes.c                            |  16 ++-
 net/ipv4/devinet.c                                 |   1 +
 net/ipv6/esp6.c                                    |   4 +-
 net/l2tp/l2tp_core.c                               |   2 +
 net/l2tp/l2tp_ip.c                                 |  28 +++-
 net/l2tp/l2tp_ip6.c                                |  28 +++-
 net/vmw_vsock/af_vsock.c                           |   2 +-
 sound/pci/hda/patch_realtek.c                      |   3 +
 76 files changed, 603 insertions(+), 157 deletions(-)

From: Hannes Reinecke <[email protected]>

commit b8018b973c7cefa5eb386540130fa47315b8e337 upstream.

When checking the model and vendor string we need to use the minimum value of either string, otherwise we'll miss out on wildcard matches.

And we should take care when matching with zero size strings; results might be unpredictable. With this patch the rules for matching devinfo strings are as follows:

- Vendor strings must match exactly
- Empty Model strings will only match if the devinfo model is also empty
- Model strings shorter than the devinfo model string will not match

---
 drivers/scsi/scsi_devinfo.c |   23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

@@ -386,8 +386,8 @@ EXPORT_SYMBOL(scsi_dev_info_list_add_key
 
 /**
  * scsi_dev_info_list_find - find a matching dev_info list entry.
- * @vendor:	vendor string
- * @model:	model (product) string
+ * @vendor:	full vendor string
+ * @model:	full model (product) string
  * @key:	specify list to use
  *
  * Description:

@@ -402,7 +402,7 @@ static struct scsi_dev_info_list *scsi_d
 	struct scsi_dev_info_list *devinfo;
 	struct scsi_dev_info_list_table *devinfo_table =
 		scsi_devinfo_lookup_by_key(key);
-	size_t vmax, mmax;
+	size_t vmax, mmax, mlen;
 	const char *vskip, *mskip;
 
 	if (IS_ERR(devinfo_table))

@@ -441,15 +441,18 @@ static struct scsi_dev_info_list *scsi_d
 			    dev_info_list) {
 		if (devinfo->compatible) {
 			/*
-			 * Behave like the older version of get_device_flags.
+			 * vendor strings must be an exact match
 			 */
-			if (memcmp(devinfo->vendor, vskip, vmax) ||
-					(vmax < sizeof(devinfo->vendor) &&
-						devinfo->vendor[vmax]))
+			if (vmax != strlen(devinfo->vendor) ||
+			    memcmp(devinfo->vendor, vskip, vmax))
 				continue;
-			if (memcmp(devinfo->model, mskip, mmax) ||
-					(mmax < sizeof(devinfo->model) &&
-						devinfo->model[mmax]))
+
+			/*
+			 * @model specifies the full string, and
+			 * must be larger or equal to devinfo->model
+			 */
+			mlen = strlen(devinfo->model);
+			if (mmax < mlen || memcmp(devinfo->model, mskip, mlen))
 				continue;
 			return devinfo;
 		} else {

From: Eugeniu Rosca <[email protected]>

commit e87581fe0509020f77ebf0b7c4c1c338c6a4bcf6 upstream.

If usb_ep_autoconfig() fails (i.e. returns a null endpoint descriptor), we expect afunc_bind() to fail (i.e. return a negative error code).

However, due to v4.10-rc1 commit f1d3861d63a5 ("usb: gadget: f_uac2: fix error handling at afunc_bind"), afunc_bind() returns zero, telling the caller that it succeeded. This then generates NULL pointer dereference in below scenario on Rcar H3-ES20-Salvator-X target:

rcar-gen3:/home/root# modprobe g_audio
[  626.521155] g_audio gadget: afunc_bind:565 Error!
[  626.526319] g_audio gadget: Linux USB Audio Gadget, version: Feb 2, 2012
[  626.533405] g_audio gadget: g_audio ready
rcar-gen3:/home/root#
rcar-gen3:/home/root# modprobe -r g_audio
[  728.256707] ==================================================================
[  728.264293] BUG: KASAN: null-ptr-deref in u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.272244] Read of size 8 at addr 00000000000000a0 by task modprobe/2545
[  728.279309]
[  728.280849] CPU: 0 PID: 2545 Comm: modprobe Tainted: G        WC      4.14.47+ #152
[  728.288778] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
[  728.296454] Call trace:
[  728.299151] [<ffff2000080925ac>] dump_backtrace+0x0/0x364
[  728.304808] [<ffff200008092924>] show_stack+0x14/0x1c
[  728.310081] [<ffff200008f8d5cc>] dump_stack+0x108/0x174
[  728.315522] [<ffff2000083c77c8>] kasan_report+0x1fc/0x354
[  728.321134] [<ffff2000083c611c>] __asan_load8+0x24/0x94
[  728.326600] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.333735] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2]
[  728.340503] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite]
[  728.348060] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite]
[  728.355788] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite]
[  728.363339] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite]
[  728.370536] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core]
[  728.378172] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core]
[  728.386274] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite]
[  728.394116] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio]
[  728.400878] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c
[  728.406935] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000)
[  728.413624] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8
[  728.421718] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000
[  728.429792] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005
[  728.437870] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000
[  728.445952] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0
[  728.454035] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428
[  728.462114] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000
[  728.470190] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010
[  728.478281] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a
[  728.486351] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  728.494434] [<ffff200008084780>] el0_svc_naked+0x34/0x38
[  728.499957] ==================================================================
[  728.507801] Unable to handle kernel NULL pointer dereference at virtual address 000000a0
[  728.517742] Mem abort info:
[  728.520993]   Exception class = DABT (current EL), IL = 32 bits
[  728.527375]   SET = 0, FnV = 0
[  728.530731]   EA = 0, S1PTW = 0
[  728.534361] Data abort info:
[  728.537650]   ISV = 0, ISS = 0x00000006
[  728.541863]   CM = 0, WnR = 0
[  728.545167] user pgtable: 4k pages, 48-bit VAs, pgd = ffff8006c6100000
[  728.552156] [00000000000000a0] *pgd=0000000716a8d003
[  728.557519] , *pud=00000007116fc003
[  728.561259] , *pmd=0000000000000000
[  728.564985] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[  728.570815] Modules linked in:
[  728.574023]  usb_f_uac2
[  728.576560]  u_audio
[  728.578827]  g_audio(-)
[  728.581361]  libcomposite
[  728.584071]  configfs
[  728.586428]  aes_ce_blk
[  728.588960]  sata_rcar
[  728.591421]  crypto_simd
[  728.594039]  cryptd
[  728.596217]  libata
[  728.598396]  aes_ce_cipher
[  728.601188]  crc32_ce
[  728.603542]  ghash_ce
[  728.605896]  gf128mul
[  728.608250]  aes_arm64
[  728.610692]  scsi_mod
[  728.613046]  sha2_ce
[  728.615313]  xhci_plat_hcd
[  728.618106]  sha256_arm64
[  728.620811]  sha1_ce
[  728.623077]  renesas_usbhs
[  728.625869]  xhci_hcd
[  728.628243]  renesas_usb3
[  728.630948]  sha1_generic
[  728.633670]  ravb_streaming(C)
[  728.636814]  udc_core
[  728.639168]  cpufreq_dt
[  728.641697]  rcar_gen3_thermal
[  728.644840]  usb_dmac
[  728.647194]  pwm_rcar
[  728.649548]  thermal_sys
[  728.652165]  virt_dma
[  728.654519]  mch_core(C)
[  728.657137]  pwm_bl
[  728.659315]  snd_soc_rcar
[  728.662020]  snd_aloop
[  728.664462]  snd_soc_generic_card
[  728.667869]  snd_soc_ak4613
[  728.670749]  ipv6
[  728.672768]  autofs4
[  728.675052] CPU: 0 PID: 2545 Comm: modprobe Tainted: G    B   WC      4.14.47+ #152
[  728.682973] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
[  728.690637] task: ffff8006ced38000 task.stack: ffff8006cf6c0000
[  728.696814] PC is at u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.702896] LR is at u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.708964] pc : [<ffff2000021e1618>] lr : [<ffff2000021e1618>] pstate: 60000145
[  728.716620] sp : ffff8006cf6c7a50
[  728.720154] x29: ffff8006cf6c7a50
[  728.723760] x28: ffff8006ced38000
[  728.727272] x27: ffff200008fd7000
[  728.730857] x26: ffff2000021d2340
[  728.734361] x25: 0000000000000000
[  728.737948] x24: ffff200009e94b08
[  728.741452] x23: 00000000000000a0
[  728.745052] x22: 00000000000000a8
[  728.748558] x21: 1ffff000d9ed8f7c
[  728.752142] x20: ffff8006d671a800
[  728.755646] x19: 0000000000000000
[  728.759231] x18: 0000000000000000
[  728.762736] x17: 0000ffffbc7c8f40
[  728.766320] x16: ffff200008213c4c
[  728.769823] x15: 0000000000000000
[  728.773408] x14: 0720072007200720
[  728.776912] x13: 0720072007200720
[  728.780497] x12: ffffffffffffffff
[  728.784001] x11: 0000000000000040
[  728.787598] x10: 0000000000001600
[  728.791103] x9 : ffff8006cf6c77a0
[  728.794689] x8 : ffff8006ced39660
[  728.798193] x7 : ffff20000811c738
[  728.801794] x6 : 0000000000000000
[  728.805299] x5 : dfff200000000000
[  728.808885] x4 : ffff8006ced38000
[  728.812390] x3 : ffff200008fb46e8
[  728.815976] x2 : 0000000000000007
[  728.819480] x1 : 3ba68643e7431500
[  728.823066] x0 : 0000000000000000
[  728.826574] Process modprobe (pid: 2545, stack limit = 0xffff8006cf6c0000)
[  728.833704] Call trace:
[  728.836292] Exception stack(0xffff8006cf6c7910 to 0xffff8006cf6c7a50)
[  728.842987] 7900:                                   0000000000000000 3ba68643e7431500
[  728.851084] 7920: 0000000000000007 ffff200008fb46e8 ffff8006ced38000 dfff200000000000
[  728.859173] 7940: 0000000000000000 ffff20000811c738 ffff8006ced39660 ffff8006cf6c77a0
[  728.867248] 7960: 0000000000001600 0000000000000040 ffffffffffffffff 0720072007200720
[  728.875323] 7980: 0720072007200720 0000000000000000 ffff200008213c4c 0000ffffbc7c8f40
[  728.883412] 79a0: 0000000000000000 0000000000000000 ffff8006d671a800 1ffff000d9ed8f7c
[  728.891485] 79c0: 00000000000000a8 00000000000000a0 ffff200009e94b08 0000000000000000
[  728.899561] 79e0: ffff2000021d2340 ffff200008fd7000 ffff8006ced38000 ffff8006cf6c7a50
[  728.907636] 7a00: ffff2000021e1618 ffff8006cf6c7a50 ffff2000021e1618 0000000060000145
[  728.915710] 7a20: 0000000000000008 0000000000000000 0000ffffffffffff 3ba68643e7431500
[  728.923780] 7a40: ffff8006cf6c7a50 ffff2000021e1618
[  728.928880] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.936032] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2]
[  728.942822] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite]
[  728.950385] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite]
[  728.958134] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite]
[  728.965689] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite]
[  728.972882] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core]
[  728.980522] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core]
[  728.988638] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite]
[  728.996472] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio]
[  729.003231] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c
[  729.009278] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000)
[  729.015946] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8
[  729.024022] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000
[  729.032099] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005
[  729.040172] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000
[  729.048263] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0
[  729.056337] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428
[  729.064411] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000
[  729.072484] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010
[  729.080563] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a
[  729.088636] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  729.096733] [<ffff200008084780>] el0_svc_naked+0x34/0x38
[  729.102259] Code: 9597d1b3 aa1703e0 9102a276 958792b9 (f9405275)
[  729.108617] ---[ end trace 7560c5fa3d100243 ]---

After this patch is applied, the issue is fixed:

rcar-gen3:/home/root# modprobe g_audio
[   59.217127] g_audio gadget: afunc_bind:565 Error!
[   59.222329] g_audio ee020000.usb: failed to start g_audio: -19
modprobe: ERROR: could not insert 'g_audio': No such device
rcar-gen3:/home/root# modprobe -r g_audio
rcar-gen3:/home/root#

---
 drivers/usb/gadget/function/f_uac2.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -1069,13 +1069,13 @@ afunc_bind(struct usb_configuration *cfg
 	agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
 	if (!agdev->out_ep) {
 		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
-		return ret;
+		return -ENODEV;
 	}
 
 	agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc);
 	if (!agdev->in_ep) {
 		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
-		return ret;
+		return -ENODEV;
 	}
 
 	uac2->p_prm.uac2 = uac2;

From: Lee, Chun-Yi <[email protected]>

commit f9ac89f5ad613b462339e845aeb8494646fd9be2 upstream.

The 98d610c3739a patch was introduced since v4.11-rc1 that it causes that the accelerometer input device will not be created on workable machines because the HID string comparing logic is wrong.

And, the patch doesn't prevent that the accelerometer input device be created on the machines that have no BST0001. That's because the acpi_get_devices() returns success even it didn't find any match device.

This patch fixed the HID string comparing logic of BST0001 device. And, it also makes sure that the acpi_get_devices() returns acpi_handle for BST0001.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=193761

---
 drivers/platform/x86/acer-wmi.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

@@ -1826,7 +1826,7 @@ static acpi_status __init acer_wmi_get_h
 	if (!strcmp(ctx, "SENR")) {
 		if (acpi_bus_get_device(ah, &dev))
 			return AE_OK;
-		if (!strcmp(ACER_WMID_ACCEL_HID, acpi_device_hid(dev)))
+		if (strcmp(ACER_WMID_ACCEL_HID, acpi_device_hid(dev)))
 			return AE_OK;
 	} else
 		return AE_OK;

@@ -1847,8 +1847,7 @@ static int __init acer_wmi_get_handle(co
 	handle = NULL;
 	status = acpi_get_devices(prop, acer_wmi_get_handle_cb,
 					(void *)name, &handle);
-
-	if (ACPI_SUCCESS(status)) {
+	if (ACPI_SUCCESS(status) && handle) {
 		*ah = handle;
 		return 0;
 	} else {

@@ -2199,8 +2198,8 @@ static int __init acer_wmi_init(void)
 		if (err)
 			return err;
 		err = acer_wmi_accel_setup();
-		if (err)
-			return err;
+		if (err && err != -ENODEV)
+			pr_warn("Cannot enable accelerometer\n");
 	}
 
 	err = platform_driver_register(&acer_platform_driver);

From: Zhen Lei <[email protected]>

commit 7284fdf39a912322ce97de2d30def3c6068a418c upstream.

This ought to be an omission in e6194923237 ("esp: Fix memleaks on error paths."). The memleak on error path in esp6_input is similar to esp_input of esp4.

---
 net/ipv6/esp6.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -426,8 +426,10 @@ static int esp6_input(struct xfrm_state
 
 	sg_init_table(sg, nfrags);
 	ret = skb_to_sgvec(skb, sg, 0, skb->len);
-	if (unlikely(ret < 0))
+	if (unlikely(ret < 0)) {
+		kfree(tmp);
 		goto out;
+	}
 
 	aead_request_set_crypt(req, sg, sg, elen + ivlen, iv);
 	aead_request_set_ad(req, assoclen);

From: Christophe Jaillet <[email protected]>

commit 3dc7c7badb7502ec3e3aa817a8bdd9e53aa54c52 upstream.

Before returning -EPERM we should release some resources, as already done in the other error handling path of the function.

---
 drivers/infiniband/hw/mlx4/mr.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

@@ -246,8 +246,11 @@ int mlx4_ib_rereg_user_mr(struct ib_mr *
 	}
 
 	if (flags & IB_MR_REREG_ACCESS) {
-		if (ib_access_writable(mr_access_flags) && !mmr->umem->writable)
-			return -EPERM;
+		if (ib_access_writable(mr_access_flags) &&
+		    !mmr->umem->writable) {
+			err = -EPERM;
+			goto release_mpt_entry;
+		}
 
 		err = mlx4_mr_hw_change_access(dev->dev, *pmpt_entry,
 					       convert_access(mr_access_flags));

From: Takashi Iwai <[email protected]>

commit fa16b69f1299004b60b625f181143500a246e5cb upstream.

ALC299 has no loopback mixer, but the driver still tries to add a beep control over the mixer NID which leads to the error at accessing it. This patch fixes it by properly declaring mixer_nid=0 for this codec.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195775

---
 sound/pci/hda/patch_realtek.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -6342,8 +6342,11 @@ static int patch_alc269(struct hda_codec
 		break;
 	case 0x10ec0225:
 	case 0x10ec0295:
+		spec->codec_variant = ALC269_TYPE_ALC225;
+		break;
 	case 0x10ec0299:
 		spec->codec_variant = ALC269_TYPE_ALC225;
+		spec->gen.mixer_nid = 0; /* no loopback on ALC299 */
 		break;
 	case 0x10ec0234:
 	case 0x10ec0274:

From: Xinwei Kong <[email protected]>

[ Upstream commit bfda044533b213985bc62bd7ca96f2b984d21b80 ]

Because of out-of-order execution about some CPU architecture, In this debug stage we find Completing spi interrupt enable -> prodrucing TXEI interrupt -> running "interrupt_transfer" function will prior to set "dw->rx and dws->rx_end" data, so this patch add memory barrier to enable dw->rx and dw->rx_end to be visible and solve to send SPI data error.
eg:
it will fix to this following low possibility error in testing environment which using SPI control to connect TPM Modules

kernel: tpm tpm0: Operation Timed out
kernel: tpm tpm0: tpm_relinquish_locality: : error -1

---
 drivers/spi/spi-dw.c | 3 +++
 1 file changed, 3 insertions(+)

index 4edd38d03b93..5688591e9cd3 100644
@@ -306,6 +306,9 @@ static int dw_spi_transfer_one(struct spi_master *master,
 	dws->len = transfer->len;
 	spin_unlock_irqrestore(&dws->buf_lock, flags);
 
+	/* Ensure dw->rx and dw->rx_end are visible */
+	smp_mb();
+
 	spi_enable_chip(dws, 0);
 
 	/* Handle per transfer options for bpw and speed */

2.25.1

From: Vasily Gorbik <[email protected]>

[ Upstream commit b4adfe55915d8363e244e42386d69567db1719b9 ]

A typical backtrace acquired from ftraced function currently looks like the following (e.g. for "path_openat"):

arch_stack_walk+0x15c/0x2d8
stack_trace_save+0x50/0x68
stack_trace_call+0x15a/0x3b8
ftrace_graph_caller+0x0/0x1c
0x3e0007e3c98 <- ftraced function caller (should be do_filp_open+0x7c/0xe8)
do_open_execat+0x70/0x1b8
__do_execve_file.isra.0+0x7d8/0x860
__s390x_sys_execve+0x56/0x68
system_call+0xdc/0x2d8

Note random "0x3e0007e3c98" stack value as ftraced function caller. This value causes either imprecise unwinder result or unwinding failure. That "0x3e0007e3c98" comes from r14 of ftraced function stack frame, which it haven't had a chance to initialize since the very first instruction calls ftrace code ("ftrace_caller"). (ftraced function might never save r14 as well). Nevertheless according to s390 ABI any function is called with stack frame allocated for it and r14 contains return address. "ftrace_caller" itself is called with "brasl %r0,ftrace_caller". So, to fix this issue simply always save traced function caller onto ftraced function stack frame.

---
 arch/s390/kernel/mcount.S | 1 +
 1 file changed, 1 insertion(+)

index 78ba14546e00..68425e68e65a 100644
@@ -36,6 +36,7 @@ ENTRY(_mcount)
 ENTRY(ftrace_caller)
 	.globl	ftrace_regs_caller
 	.set	ftrace_regs_caller,ftrace_caller
+	stg	%r14,(__SF_GPRS+8*8)(%r15)	# save traced function caller
 	lgr	%r1,%r15
 #ifndef CC_USING_HOTPATCH
 	aghi	%r0,MCOUNT_RETURN_FIXUP

2.25.1

From: Eugeniy Paltsev <[email protected]>

[ Upstream commit 43900edf67d7ef3ac8909854d75b8a1fba2d570c ]

As of today the ICCM and DCCM size checks are incorrectly using mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in runtime and stored in cpu->dccm.sz and cpu->iccm.sz is in bytes.

Fix that.

---
 arch/arc/kernel/setup.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

index 3013f3f82b95..66e4dc8bce1d 100644
@@ -12,6 +12,7 @@
 #include <linux/root_dev.h>
 #include <linux/console.h>
 #include <linux/module.h>
+#include <linux/sizes.h>
 #include <linux/cpu.h>
 #include <linux/clk-provider.h>
 #include <linux/of_fdt.h>

@@ -308,12 +309,12 @@ static void arc_chk_core_config(void)
 	if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr)
 		panic("Linux built with incorrect DCCM Base address\n");
 
-	if (CONFIG_ARC_DCCM_SZ != cpu->dccm.sz)
+	if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz)
 		panic("Linux built with incorrect DCCM Size\n");
 #endif
 
 #ifdef CONFIG_ARC_HAS_ICCM
-	if (CONFIG_ARC_ICCM_SZ != cpu->iccm.sz)
+	if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz)
 		panic("Linux built with incorrect ICCM Size\n");
 #endif
 

2.25.1

From: Nathan Chancellor <[email protected]>

[ Upstream commit d7110a26e5905ec2fe3fc88bc6a538901accb72b ]

When building with Clang + -Wtautological-compare and CONFIG_CPUMASK_OFFSTACK unset:

arch/x86/mm/mmio-mod.c:375:6: warning: comparison of array 'downed_cpus' equal to a null pointer is always false [-Wtautological-pointer-compare]

          if (downed_cpus == NULL &&
              ^~~~~~~~~~~    ~~~~
  arch/x86/mm/mmio-mod.c:405:6: warning: comparison of array 'downed_cpus'
  equal to a null pointer is always false [-Wtautological-pointer-compare]
          if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
              ^~~~~~~~~~~    ~~~~

2 warnings generated.

Commit

f7e30f01a9e2 ("cpumask: Add helper cpumask_available()")

added cpumask_available() to fix warnings of this nature. Use that here so that clang does not warn regardless of CONFIG_CPUMASK_OFFSTACK's value.

---
 arch/x86/mm/mmio-mod.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 0057a7accfb1..5448ad4d0703 100644
@@ -385,7 +385,7 @@ static void enter_uniprocessor(void)
 	int cpu;
 	int err;
 
-	if (downed_cpus == NULL &&
+	if (!cpumask_available(downed_cpus) &&
 	    !alloc_cpumask_var(&downed_cpus, GFP_KERNEL)) {
 		pr_notice("Failed to allocate mask\n");
 		goto out;

@@ -415,7 +415,7 @@ static void leave_uniprocessor(void)
 	int cpu;
 	int err;
 
-	if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
+	if (!cpumask_available(downed_cpus) || cpumask_weight(downed_cpus) == 0)
 		return;
 	pr_notice("Re-enabling CPUs...\n");
 	for_each_cpu(cpu, downed_cpus) {

2.25.1

From: Jeremy Kerr <[email protected]>

[ Upstream commit ef01cee2ee1b369c57a936166483d40942bcc3e3 ]

In bmac_get_station_address, We're reading two bytes at a time from ROM, but we do that six times, resulting in 12 bytes of read & writes. This means we will write off the end of the six-byte destination buffer.

This change fixes the for-loop to only read/write six bytes.

Based on a proposed fix from Finn Thain <[email protected]>.

---
 drivers/net/ethernet/apple/bmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index a65d7a60f116..ffa7e7e6d18d 100644
@@ -1187,7 +1187,7 @@ bmac_get_station_address(struct net_device *dev, unsigned char *ea)
 	int i;
 	unsigned short data;
 
-	for (i = 0; i < 6; i++)
+	for (i = 0; i < 3; i++)
 		{
 			reset_and_select_srom(dev);
 			data = read_srom(dev, i + EnetAddressOffset/2, SROMAddressBits);

2.25.1

From: Valentin Longchamp <[email protected]>

[ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ]

ugeth_quiesce/activate are used to halt the controller when there is a link change that requires to reconfigure the mac.

The previous implementation called netif_device_detach(). This however causes the initial activation of the netdevice to fail precisely because it's detached. For details, see [1].

A possible workaround was the revert of commit
net: linkwatch: add check for netdevice being present to linkwatch_do_dev However, the check introduced in the above commit is correct and shall be kept.

The netif_device_detach() is thus replaced with netif_tx_stop_all_queues() that prevents any tranmission. This allows to perform mac config change required by the link change, without detaching the corresponding netdevice and thus not preventing its initial activation.

[1] https://lists.openwall.net/netdev/2020/01/08/201

---
 drivers/net/ethernet/freescale/ucc_geth.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

index 55ac00055977..96a1f62cc148 100644
@@ -45,6 +45,7 @@
 #include <asm/ucc.h>
 #include <asm/ucc_fast.h>
 #include <asm/machdep.h>
+#include <net/sch_generic.h>
 
 #include "ucc_geth.h"
 

@@ -1551,11 +1552,8 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
 
 static void ugeth_quiesce(struct ucc_geth_private *ugeth)
 {
-	/* Prevent any further xmits, plus detach the device. */
-	netif_device_detach(ugeth->ndev);
-
-	/* Wait for any current xmits to finish. */
-	netif_tx_disable(ugeth->ndev);
+	/* Prevent any further xmits */
+	netif_tx_stop_all_queues(ugeth->ndev);
 
 	/* Disable the interrupt to avoid NAPI rescheduling. */
 	disable_irq(ugeth->ug_info->uf_info.irq);

@@ -1568,7 +1566,10 @@ static void ugeth_activate(struct ucc_geth_private *ugeth)
 {
 	napi_enable(&ugeth->napi);
 	enable_irq(ugeth->ug_info->uf_info.irq);
-	netif_device_attach(ugeth->ndev);
+
+	/* allow to xmit again  */
+	netif_tx_wake_all_queues(ugeth->ndev);
+	__netdev_watchdog_up(ugeth->ndev);
 }
 
 /* Called every time the controller might need to be made

2.25.1

From: Jonathan McDowell <[email protected]>

[ Upstream commit a96ac8a0045e3cbe3e5af6d1b3c78c6c2065dec5 ]

The ipq806x_gmac_probe() function enables the PTP clock but not the appropriate interface clocks. This means that if the bootloader hasn't done so attempting to bring up the interface will fail with an error like:

[   59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma
[   59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed
[   59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed

This patch, a slightly cleaned up version of one posted by Sergey Sergeev in:

https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257

correctly enables the clock; we have already configured the source just before this.

Tested on a MikroTik RB3011.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

index 1fc356c17750..15aabffd21a8 100644
@@ -328,6 +328,19 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 	/* Enable PTP clock */
 	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
 	val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val |= NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
+			NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		val |= NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
+				NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
+		break;
+	default:
+		/* We don't get here; the switch above will have errored out */
+		unreachable();
+	}
 	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
 
 	if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {

2.25.1

From: Guillaume Nault <[email protected]>

We don't want to disconnect a session because of a stray PADT arriving while the interface is in promiscuous mode.
Furthermore, multicast and broadcast packets make no sense here, so only PACKET_HOST is accepted.

---
 drivers/net/ppp/pppoe.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -494,6 +494,9 @@ static int pppoe_disc_rcv(struct sk_buff
 	if (!skb)
 		goto out;
 
+	if (skb->pkt_type != PACKET_HOST)
+		goto abort;
+
 	if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
 		goto abort;
 

From: Jérôme Pouiller <[email protected]>

commit 83fc5dd57f86c3ec7d6d22565a6ff6c948853b64 upstream.

The definitions of MMC_IOC_CMD and of MMC_IOC_MULTI_CMD rely on MMC_BLOCK_MAJOR:

    #define MMC_IOC_CMD       _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
    #define MMC_IOC_MULTI_CMD _IOWR(MMC_BLOCK_MAJOR, 1, struct mmc_ioc_multi_cmd)

However, MMC_BLOCK_MAJOR is defined in linux/major.h and linux/mmc/ioctl.h did not include it.

---
 include/uapi/linux/mmc/ioctl.h |    1 +
 1 file changed, 1 insertion(+)

@@ -2,6 +2,7 @@
 #define LINUX_MMC_IOCTL_H
 
 #include <linux/types.h>
+#include <linux/major.h>
 
 struct mmc_ioc_cmd {
 	/* Implies direction of data.  true = write, false = read */

From: Ben Hutchings <[email protected]>

Commit 9ebd796e2400 ("can: slcan: Fix use-after-free Read in slcan_open") was incorrectly backported to 4.4 and 4.9 stable branches.

Since they do not have commit cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state."), the destructor function slc_free_netdev() is already responsible for calling free_netdev() and slcan_open() must not call both of them.

yangerkun previously fixed the same bug in slip.

---
 drivers/net/can/slcan.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

@@ -618,10 +618,9 @@ err_free_chan:
 	sl->tty = NULL;
 	tty->disc_data = NULL;
 	clear_bit(SLF_INUSE, &sl->flags);
-	slc_free_netdev(sl->dev);
 	/* do not call free_netdev before rtnl_unlock */
 	rtnl_unlock();
-	free_netdev(sl->dev);
+	slc_free_netdev(sl->dev);
 	return err;
 
 err_exit:

From: yangerkun <[email protected]>

commit f596c87005f7b1baeb7d62d9a9e25d68c3dfae10 upstream.

As the description before netdev_run_todo, we cannot call free_netdev before rtnl_unlock, fix it by reorder the code.

---
 drivers/net/slip/slip.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -867,7 +867,10 @@ err_free_chan:
 	sl->tty = NULL;
 	tty->disc_data = NULL;
 	clear_bit(SLF_INUSE, &sl->flags);
+	/* do not call free_netdev before rtnl_unlock */
+	rtnl_unlock();
 	sl_free_netdev(sl->dev);
+	return err;
 
 err_exit:
 	rtnl_unlock();

From: Can Guo <[email protected]>

commit 17c7d35f141ef6158076adf3338f115f64fcf760 upstream.

In queuecommand path, if DMA map fails, it bails out with clock held. In this case, release the clock to keep its usage paired.

[mkp: applied by hand]

[EB: resolved cherry-pick conflict caused by newer kernels not having
the clear_bit_unlock() line]

---
 drivers/scsi/ufs/ufshcd.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1374,6 +1374,7 @@ static int ufshcd_queuecommand(struct Sc
 	ufshcd_compose_upiu(hba, lrbp);
 	err = ufshcd_map_sg(lrbp);
 	if (err) {
+		ufshcd_release(hba);
 		lrbp->cmd = NULL;
 		clear_bit_unlock(tag, &hba->lrb_in_use);
 		goto out;

From: Yang Yingliang <[email protected]>

[ Upstream commit 1b49cd71b52403822731dc9f283185d1da355f97 ]

When devinet_sysctl_register() failed, the memory allocated in neigh_parms_alloc() should be freed.

---
 net/ipv4/devinet.c |    1 +
 1 file changed, 1 insertion(+)

@@ -262,6 +262,7 @@ static struct in_device *inetdev_init(st
 	err = devinet_sysctl_register(in_dev);
 	if (err) {
 		in_dev->dead = 1;
+		neigh_parms_release(&arp_tbl, in_dev->arp_parms);
 		in_dev_put(in_dev);
 		in_dev = NULL;
 		goto out;

From: Chuhong Yuan <[email protected]>

[ Upstream commit 3decabdc714ca56c944f4669b4cdec5c2c1cea23 ]

st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path. Add the missed function call to fix it.

---
 drivers/nfc/st21nfca/dep.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -184,8 +184,10 @@ static int st21nfca_tm_send_atr_res(stru
 		memcpy(atr_res->gbi, atr_req->gbi, gb_len);
 		r = nfc_set_remote_general_bytes(hdev->ndev, atr_res->gbi,
 						  gb_len);
-		if (r < 0)
+		if (r < 0) {
+			kfree_skb(skb);
 			return r;
+		}
 	}
 
 	info->dep_info.curr_nfc_dep_pni = 0;

From: Stefano Garzarella <[email protected]>

[ Upstream commit 7e0afbdfd13d1e708fe96e31c46c4897101a6a43 ]

The accept(2) is an "input" socket interface, so we should use SO_RCVTIMEO instead of SO_SNDTIMEO to set the timeout.

So this patch replace sock_sndtimeo() with sock_rcvtimeo() to use the right timeout in the vsock_accept().

---
 net/vmw_vsock/af_vsock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1270,7 +1270,7 @@ static int vsock_accept(struct socket *s
 	/* Wait for children sockets to appear; these are the new sockets
 	 * created upon connection establishment.
 	 */
-	timeout = sock_sndtimeo(listener, flags & O_NONBLOCK);
+	timeout = sock_rcvtimeo(listener, flags & O_NONBLOCK);
 	prepare_to_wait(sk_sleep(listener), &wait, TASK_INTERRUPTIBLE);
 
 	while ((connected = vsock_dequeue_accept(listener)) == NULL &&

From: Eric Dumazet <[email protected]>

[ Upstream commit d9a81a225277686eb629938986d97629ea102633 ]

syzbot was able to trigger a crash after using an ISDN socket and fool l2tp.

Fix this by making sure the UDP socket is of the proper family.

BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018

CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x188/0x20d lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382
 __kasan_report.cold+0x20/0x38 mm/kasan/report.c:511
 kasan_report+0x33/0x50 mm/kasan/common.c:625
 setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
 l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523
 l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249
 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
 genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6e6/0x810 net/socket.c:2352
 ___sys_sendmsg+0x100/0x170 net/socket.c:2406
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4

Allocated by task 3018:
 save_stack+0x1b/0x40 mm/kasan/common.c:49
 set_track mm/kasan/common.c:57 [inline]
 __kasan_kmalloc mm/kasan/common.c:495 [inline]
 __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468
 __do_kmalloc mm/slab.c:3656 [inline]
 __kmalloc+0x161/0x7a0 mm/slab.c:3665
 kmalloc include/linux/slab.h:560 [inline]
 sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612
 sk_alloc+0x36/0x1100 net/core/sock.c:1666
 data_sock_create drivers/isdn/mISDN/socket.c:600 [inline]
 mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796
 __sock_create+0x3cb/0x730 net/socket.c:1428
 sock_create net/socket.c:1479 [inline]
 __sys_socket+0xef/0x200 net/socket.c:1521
 __do_sys_socket net/socket.c:1530 [inline]
 __se_sys_socket net/socket.c:1528 [inline]
 __x64_sys_socket+0x6f/0xb0 net/socket.c:1528
 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
 entry_SYSCALL_64_after_hwframe+0x49/0xb3

Freed by task 2484:
 save_stack+0x1b/0x40 mm/kasan/common.c:49
 set_track mm/kasan/common.c:57 [inline]
 kasan_set_free_info mm/kasan/common.c:317 [inline]
 __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x109/0x2b0 mm/slab.c:3757
 kvfree+0x42/0x50 mm/util.c:603
 __free_fdtable+0x2d/0x70 fs/file.c:31
 put_files_struct fs/file.c:420 [inline]
 put_files_struct+0x248/0x2e0 fs/file.c:413
 exit_files+0x7e/0xa0 fs/file.c:445
 do_exit+0xb04/0x2dd0 kernel/exit.c:791
 do_group_exit+0x125/0x340 kernel/exit.c:894
 get_signal+0x47b/0x24e0 kernel/signal.c:2739
 do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784
 exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161
 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
 do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305
 entry_SYSCALL_64_after_hwframe+0x49/0xb3

The buggy address belongs to the object at ffff88808ed0c000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1424 bytes inside of
 2048-byte region [ffff88808ed0c000, ffff88808ed0c800)
The buggy address belongs to the page:
page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00
raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                         ^
 ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

---
 net/l2tp/l2tp_core.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1573,6 +1573,8 @@ int l2tp_tunnel_create(struct net *net,
 			 tunnel_id, fd);
 		goto err;
 	}
+	if (sk->sk_family != PF_INET && sk->sk_family != PF_INET6)
+		goto err;
 	switch (encap) {
 	case L2TP_ENCAPTYPE_UDP:
 		if (sk->sk_protocol != IPPROTO_UDP) {

From: Eric Dumazet <[email protected]>

[ Upstream commit 02c71b144c811bcdd865e0a1226d0407d11357e8 ]

syzbot recently found a way to crash the kernel [1]

Issue here is that inet_hash() & inet_unhash() are currently only meant to be used by TCP & DCCP, since only these protocols provide the needed hashinfo pointer.

L2TP uses a single list (instead of a hash table)

This old bug became an issue after commit 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications") since after this commit, sk_common_release() can be called while the L2TP socket is still considered 'hashed'.

general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:ffffc90001777d30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242
RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008
RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1
R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0
R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00
FS:  0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 sk_common_release+0xba/0x370 net/core/sock.c:3210
 inet_create net/ipv4/af_inet.c:390 [inline]
 inet_create+0x966/0xe00 net/ipv4/af_inet.c:248
 __sock_create+0x3cb/0x730 net/socket.c:1428
 sock_create net/socket.c:1479 [inline]
 __sys_socket+0xef/0x200 net/socket.c:1521
 __do_sys_socket net/socket.c:1530 [inline]
 __se_sys_socket net/socket.c:1528 [inline]
 __x64_sys_socket+0x6f/0xb0 net/socket.c:1528
 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x441e29
Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29
RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace 23b6578228ce553e ]---
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:ffffc90001777d30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242
RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008
RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1
R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0
R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00
FS:  0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

---
 net/l2tp/l2tp_ip.c  |   28 +++++++++++++++++++++-------
 net/l2tp/l2tp_ip6.c |   28 +++++++++++++++++++++-------
 2 files changed, 42 insertions(+), 14 deletions(-)

@@ -24,7 +24,6 @@
 #include <net/icmp.h>
 #include <net/udp.h>
 #include <net/inet_common.h>
-#include <net/inet_hashtables.h>
 #include <net/tcp_states.h>
 #include <net/protocol.h>
 #include <net/xfrm.h>

@@ -213,15 +212,30 @@ discard:
 	return 0;
 }
 
-static int l2tp_ip_open(struct sock *sk)
+static void l2tp_ip_hash(struct sock *sk)
 {
-	/* Prevent autobind. We don't have ports. */
-	inet_sk(sk)->inet_num = IPPROTO_L2TP;
+	if (sk_unhashed(sk)) {
+		write_lock_bh(&l2tp_ip_lock);
+		sk_add_node(sk, &l2tp_ip_table);
+		write_unlock_bh(&l2tp_ip_lock);
+	}
+}
 
+static void l2tp_ip_unhash(struct sock *sk)
+{
+	if (sk_unhashed(sk))
+		return;
 	write_lock_bh(&l2tp_ip_lock);
-	sk_add_node(sk, &l2tp_ip_table);
+	sk_del_node_init(sk);
 	write_unlock_bh(&l2tp_ip_lock);
+}
+
+static int l2tp_ip_open(struct sock *sk)
+{
+	/* Prevent autobind. We don't have ports. */
+	inet_sk(sk)->inet_num = IPPROTO_L2TP;
 
+	l2tp_ip_hash(sk);
 	return 0;
 }
 

@@ -603,8 +617,8 @@ static struct proto l2tp_ip_prot = {
 	.sendmsg	   = l2tp_ip_sendmsg,
 	.recvmsg	   = l2tp_ip_recvmsg,
 	.backlog_rcv	   = l2tp_ip_backlog_recv,
-	.hash		   = inet_hash,
-	.unhash		   = inet_unhash,
+	.hash		   = l2tp_ip_hash,
+	.unhash		   = l2tp_ip_unhash,
 	.obj_size	   = sizeof(struct l2tp_ip_sock),
 #ifdef CONFIG_COMPAT
 	.compat_setsockopt = compat_ip_setsockopt,

@@ -24,7 +24,6 @@
 #include <net/icmp.h>
 #include <net/udp.h>
 #include <net/inet_common.h>
-#include <net/inet_hashtables.h>
 #include <net/tcp_states.h>
 #include <net/protocol.h>
 #include <net/xfrm.h>

@@ -226,15 +225,30 @@ discard:
 	return 0;
 }
 
-static int l2tp_ip6_open(struct sock *sk)
+static void l2tp_ip6_hash(struct sock *sk)
 {
-	/* Prevent autobind. We don't have ports. */
-	inet_sk(sk)->inet_num = IPPROTO_L2TP;
+	if (sk_unhashed(sk)) {
+		write_lock_bh(&l2tp_ip6_lock);
+		sk_add_node(sk, &l2tp_ip6_table);
+		write_unlock_bh(&l2tp_ip6_lock);
+	}
+}
 
+static void l2tp_ip6_unhash(struct sock *sk)
+{
+	if (sk_unhashed(sk))
+		return;
 	write_lock_bh(&l2tp_ip6_lock);
-	sk_add_node(sk, &l2tp_ip6_table);
+	sk_del_node_init(sk);
 	write_unlock_bh(&l2tp_ip6_lock);
+}
+
+static int l2tp_ip6_open(struct sock *sk)
+{
+	/* Prevent autobind. We don't have ports. */
+	inet_sk(sk)->inet_num = IPPROTO_L2TP;
 
+	l2tp_ip6_hash(sk);
 	return 0;
 }
 

@@ -730,8 +744,8 @@ static struct proto l2tp_ip6_prot = {
 	.sendmsg	   = l2tp_ip6_sendmsg,
 	.recvmsg	   = l2tp_ip6_recvmsg,
 	.backlog_rcv	   = l2tp_ip6_backlog_recv,
-	.hash		   = inet_hash,
-	.unhash		   = inet_unhash,
+	.hash		   = l2tp_ip6_hash,
+	.unhash		   = l2tp_ip6_unhash,
 	.obj_size	   = sizeof(struct l2tp_ip6_sock),
 #ifdef CONFIG_COMPAT
 	.compat_setsockopt = compat_ipv6_setsockopt,

From: Matt Jolly <[email protected]>

commit 3429444abdd9dbd5faebd9bee552ec6162b17ad6 upstream.

Add support for Dell Wireless 5816e Download Mode (AKA boot & hold mode / QDL download mode) to drivers/usb/serial/qcserial.c

This is required to update device firmware.

---
 drivers/usb/serial/qcserial.c |    1 +
 1 file changed, 1 insertion(+)

@@ -177,6 +177,7 @@ static const struct usb_device_id id_tab
 	{DEVICE_SWI(0x413c, 0x81b3)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
 	{DEVICE_SWI(0x413c, 0x81b5)},	/* Dell Wireless 5811e QDL */
 	{DEVICE_SWI(0x413c, 0x81b6)},	/* Dell Wireless 5811e QDL */
+	{DEVICE_SWI(0x413c, 0x81cb)},	/* Dell Wireless 5816e QDL */
 	{DEVICE_SWI(0x413c, 0x81cc)},	/* Dell Wireless 5816e */
 	{DEVICE_SWI(0x413c, 0x81cf)},   /* Dell Wireless 5819 */
 	{DEVICE_SWI(0x413c, 0x81d0)},   /* Dell Wireless 5819 */

From: Bin Liu <[email protected]>

commit 986c1748c84d7727defeaeca74a73b37f7d5cce1 upstream.

usb_wwan_indat_callback() shouldn't resubmit rx urb if the previous urb status is a fatal error. Or the usb controller would keep processing the new urbs then run into interrupt storm, and has no chance to recover.

---
 drivers/usb/serial/usb_wwan.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -305,6 +305,10 @@ static void usb_wwan_indat_callback(stru
 	if (status) {
 		dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n",
 			__func__, status, endpoint);
+
+		/* don't resubmit on fatal errors */
+		if (status == -ESHUTDOWN || status == -ENOENT)
+			return;
 	} else {
 		if (urb->actual_length) {
 			tty_insert_flip_string(&port->port, data,

From: Daniele Palmas <[email protected]>

commit 399ad9477c523f721f8e51d4f824bdf7267f120c upstream.

Add Telit LE910C1-EUX compositions:

	0x1031: tty, tty, tty, rmnet
	0x1033: tty, tty, tty, ecm

---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -1146,6 +1146,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1031, 0xff),	/* Telit LE910C1-EUX */
+	 .driver_info = NCTRL(0) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1033, 0xff),	/* Telit LE910C1-EUX (ECM) */
+	 .driver_info = NCTRL(0) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0),
 	  .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1),

From: Dmitry Torokhov <[email protected]>

commit b86dab054059b970111b5516ae548efaae5b3aae upstream.

When k_ascii is invoked several times in a row there is a potential for signed integer overflow:

UBSAN: Undefined behaviour in drivers/tty/vt/keyboard.c:888:19 signed integer overflow:
10 * 1111111111 cannot be represented in type 'int'
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xce/0x128 lib/dump_stack.c:118
 ubsan_epilogue+0xe/0x30 lib/ubsan.c:154
 handle_overflow+0xdc/0xf0 lib/ubsan.c:184
 __ubsan_handle_mul_overflow+0x2a/0x40 lib/ubsan.c:205
 k_ascii+0xbf/0xd0 drivers/tty/vt/keyboard.c:888
 kbd_keycode drivers/tty/vt/keyboard.c:1477 [inline]
 kbd_event+0x888/0x3be0 drivers/tty/vt/keyboard.c:1495

While it can be worked around by using check_mul_overflow()/ check_add_overflow(), it is better to introduce a separate flag to signal that number pad is being used to compose a symbol, and change type of the accumulator from signed to unsigned, thus avoiding undefined behavior when it overflows.

---
 drivers/tty/vt/keyboard.c |   26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

@@ -125,7 +125,11 @@ static DEFINE_SPINLOCK(func_buf_lock); /
 static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)];	/* keyboard key bitmap */
 static unsigned char shift_down[NR_SHIFT];		/* shift state counters.. */
 static bool dead_key_next;
-static int npadch = -1;					/* -1 or number assembled on pad */
+
+/* Handles a number being assembled on the number pad */
+static bool npadch_active;
+static unsigned int npadch_value;
+
 static unsigned int diacr;
 static char rep;					/* flag telling character repeat */
 

@@ -815,12 +819,12 @@ static void k_shift(struct vc_data *vc,
 		shift_state &= ~(1 << value);
 
 	/* kludge */
-	if (up_flag && shift_state != old_state && npadch != -1) {
+	if (up_flag && shift_state != old_state && npadch_active) {
 		if (kbd->kbdmode == VC_UNICODE)
-			to_utf8(vc, npadch);
+			to_utf8(vc, npadch_value);
 		else
-			put_queue(vc, npadch & 0xff);
-		npadch = -1;
+			put_queue(vc, npadch_value & 0xff);
+		npadch_active = false;
 	}
 }
 

@@ -838,7 +842,7 @@ static void k_meta(struct vc_data *vc, u
 
 static void k_ascii(struct vc_data *vc, unsigned char value, char up_flag)
 {
-	int base;
+	unsigned int base;
 
 	if (up_flag)
 		return;

@@ -852,10 +856,12 @@ static void k_ascii(struct vc_data *vc,
 		base = 16;
 	}
 
-	if (npadch == -1)
-		npadch = value;
-	else
-		npadch = npadch * base + value;
+	if (!npadch_active) {
+		npadch_value = 0;
+		npadch_active = true;
+	}
+
+	npadch_value = npadch_value * base + value;
 }
 
 static void k_lock(struct vc_data *vc, unsigned char value, char up_flag)

From: Pascal Terjan <[email protected]>

commit 15ea976a1f12b5fd76b1bd6ff3eb5132fd28047f upstream.

The value in shared headers was fixed 9 years ago in commit 8d661f1e462d ("ieee80211: correct IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK macro") and while looking at using shared headers for other duplicated constants I noticed this driver uses the old value.

The macros are also defined twice in this file so I am deleting the second definition.

---
 drivers/staging/rtl8712/wifi.h |    9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

@@ -466,7 +466,7 @@ static inline unsigned char *get_hdr_bss
 /* block-ack parameters */
 #define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
 #define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
-#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0
+#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0
 #define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
 #define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
 

@@ -560,13 +560,6 @@ struct ieee80211_ht_addt_info {
 #define IEEE80211_HT_IE_NON_GF_STA_PRSNT	0x0004
 #define IEEE80211_HT_IE_NON_HT_STA_PRSNT	0x0010
 
-/* block-ack parameters */
-#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
-#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
-#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0
-#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
-#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
-
 /*
  * A-PMDU buffer sizes
  * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)

From: Jia Zhang <[email protected]>

commit b399151cb48db30ad1e0e93dd40d68c6d007b637 upstream.

x86_mask is a confusing name which is hard to associate with the processor's stepping.

Additionally, correct an indent issue in lib/cpu.c.

[ Backport by Mark Gross to simplify the SRBDS backport ]

---
 arch/x86/include/asm/acpi.h                |    2 +-
 arch/x86/include/asm/processor.h           |    2 +-
 arch/x86/kernel/amd_nb.c                   |    2 +-
 arch/x86/kernel/asm-offsets_32.c           |    2 +-
 arch/x86/kernel/cpu/amd.c                  |   26 +++++++++++++-------------
 arch/x86/kernel/cpu/centaur.c              |    4 ++--
 arch/x86/kernel/cpu/common.c               |    8 ++++----
 arch/x86/kernel/cpu/cyrix.c                |    2 +-
 arch/x86/kernel/cpu/intel.c                |   20 ++++++++++----------
 arch/x86/kernel/cpu/microcode/intel.c      |    4 ++--
 arch/x86/kernel/cpu/mtrr/generic.c         |    2 +-
 arch/x86/kernel/cpu/mtrr/main.c            |    4 ++--
 arch/x86/kernel/cpu/perf_event_intel.c     |    2 +-
 arch/x86/kernel/cpu/perf_event_intel_lbr.c |    2 +-
 arch/x86/kernel/cpu/perf_event_p6.c        |    2 +-
 arch/x86/kernel/cpu/proc.c                 |    4 ++--
 arch/x86/kernel/head_32.S                  |    4 ++--
 arch/x86/kernel/mpparse.c                  |    2 +-
 drivers/char/hw_random/via-rng.c           |    2 +-
 drivers/cpufreq/acpi-cpufreq.c             |    2 +-
 drivers/cpufreq/longhaul.c                 |    6 +++---
 drivers/cpufreq/p4-clockmod.c              |    2 +-
 drivers/cpufreq/powernow-k7.c              |    2 +-
 drivers/cpufreq/speedstep-centrino.c       |    4 ++--
 drivers/cpufreq/speedstep-lib.c            |    6 +++---
 drivers/crypto/padlock-aes.c               |    2 +-
 drivers/edac/amd64_edac.c                  |    2 +-
 drivers/edac/mce_amd.c                     |    2 +-
 drivers/hwmon/coretemp.c                   |    6 +++---
 drivers/hwmon/hwmon-vid.c                  |    2 +-
 drivers/hwmon/k10temp.c                    |    2 +-
 drivers/hwmon/k8temp.c                     |    2 +-
 drivers/video/fbdev/geode/video_gx.c       |    2 +-
 33 files changed, 69 insertions(+), 69 deletions(-)

@@ -92,7 +92,7 @@ static inline unsigned int acpi_processo
 	if (boot_cpu_data.x86 == 0x0F &&
 	    boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
 	    boot_cpu_data.x86_model <= 0x05 &&
-	    boot_cpu_data.x86_mask < 0x0A)
+	    boot_cpu_data.x86_stepping < 0x0A)
 		return 1;
 	else if (amd_e400_c1e_detected)
 		return 1;

@@ -88,7 +88,7 @@ struct cpuinfo_x86 {
 	__u8			x86;		/* CPU family */
 	__u8			x86_vendor;	/* CPU vendor */
 	__u8			x86_model;
-	__u8			x86_mask;
+	__u8			x86_stepping;
 #ifdef CONFIG_X86_32
 	char			wp_works_ok;	/* It doesn't on 386's */
 

@@ -105,7 +105,7 @@ int amd_cache_northbridges(void)
 	if (boot_cpu_data.x86 == 0x10 &&
 	    boot_cpu_data.x86_model >= 0x8 &&
 	    (boot_cpu_data.x86_model > 0x9 ||
-	     boot_cpu_data.x86_mask >= 0x1))
+	     boot_cpu_data.x86_stepping >= 0x1))
 		amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE;
 
 	if (boot_cpu_data.x86 == 0x15)

@@ -20,7 +20,7 @@ void foo(void)
 	OFFSET(CPUINFO_x86, cpuinfo_x86, x86);
 	OFFSET(CPUINFO_x86_vendor, cpuinfo_x86, x86_vendor);
 	OFFSET(CPUINFO_x86_model, cpuinfo_x86, x86_model);
-	OFFSET(CPUINFO_x86_mask, cpuinfo_x86, x86_mask);
+	OFFSET(CPUINFO_x86_stepping, cpuinfo_x86, x86_stepping);
 	OFFSET(CPUINFO_cpuid_level, cpuinfo_x86, cpuid_level);
 	OFFSET(CPUINFO_x86_capability, cpuinfo_x86, x86_capability);
 	OFFSET(CPUINFO_x86_vendor_id, cpuinfo_x86, x86_vendor_id);

@@ -112,7 +112,7 @@ static void init_amd_k6(struct cpuinfo_x
 		return;
 	}
 
-	if (c->x86_model == 6 && c->x86_mask == 1) {
+	if (c->x86_model == 6 && c->x86_stepping == 1) {
 		const int K6_BUG_LOOP = 1000000;
 		int n;
 		void (*f_vide)(void);

@@ -142,7 +142,7 @@ static void init_amd_k6(struct cpuinfo_x
 
 	/* K6 with old style WHCR */
 	if (c->x86_model < 8 ||
-	   (c->x86_model == 8 && c->x86_mask < 8)) {
+	   (c->x86_model == 8 && c->x86_stepping < 8)) {
 		/* We can only write allocate on the low 508Mb */
 		if (mbytes > 508)
 			mbytes = 508;

@@ -161,7 +161,7 @@ static void init_amd_k6(struct cpuinfo_x
 		return;
 	}
 
-	if ((c->x86_model == 8 && c->x86_mask > 7) ||
+	if ((c->x86_model == 8 && c->x86_stepping > 7) ||
 	     c->x86_model == 9 || c->x86_model == 13) {
 		/* The more serious chips .. */
 

@@ -214,7 +214,7 @@ static void init_amd_k7(struct cpuinfo_x
 	 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
 	 * As per AMD technical note 27212 0.2
 	 */
-	if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
+	if ((c->x86_model == 8 && c->x86_stepping >= 1) || (c->x86_model > 8)) {
 		rdmsr(MSR_K7_CLK_CTL, l, h);
 		if ((l & 0xfff00000) != 0x20000000) {
 			printk(KERN_INFO

@@ -235,12 +235,12 @@ static void init_amd_k7(struct cpuinfo_x
 	 * but they are not certified as MP capable.
 	 */
 	/* Athlon 660/661 is valid. */
-	if ((c->x86_model == 6) && ((c->x86_mask == 0) ||
-	    (c->x86_mask == 1)))
+	if ((c->x86_model == 6) && ((c->x86_stepping == 0) ||
+	    (c->x86_stepping == 1)))
 		return;
 
 	/* Duron 670 is valid */
-	if ((c->x86_model == 7) && (c->x86_mask == 0))
+	if ((c->x86_model == 7) && (c->x86_stepping == 0))
 		return;
 
 	/*

@@ -250,8 +250,8 @@ static void init_amd_k7(struct cpuinfo_x
 	 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
 	 * more.
 	 */
-	if (((c->x86_model == 6) && (c->x86_mask >= 2)) ||
-	    ((c->x86_model == 7) && (c->x86_mask >= 1)) ||
+	if (((c->x86_model == 6) && (c->x86_stepping >= 2)) ||
+	    ((c->x86_model == 7) && (c->x86_stepping >= 1)) ||
 	     (c->x86_model > 7))
 		if (cpu_has(c, X86_FEATURE_MP))
 			return;

@@ -563,7 +563,7 @@ static void early_init_amd(struct cpuinf
 	/*  Set MTRR capability flag if appropriate */
 	if (c->x86 == 5)
 		if (c->x86_model == 13 || c->x86_model == 9 ||
-		    (c->x86_model == 8 && c->x86_mask >= 8))
+		    (c->x86_model == 8 && c->x86_stepping >= 8))
 			set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 #endif
 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)

@@ -902,11 +902,11 @@ static unsigned int amd_size_cache(struc
 	/* AMD errata T13 (order #21922) */
 	if ((c->x86 == 6)) {
 		/* Duron Rev A0 */
-		if (c->x86_model == 3 && c->x86_mask == 0)
+		if (c->x86_model == 3 && c->x86_stepping == 0)
 			size = 64;
 		/* Tbird rev A1/A2 */
 		if (c->x86_model == 4 &&
-			(c->x86_mask == 0 || c->x86_mask == 1))
+			(c->x86_stepping == 0 || c->x86_stepping == 1))
 			size = 256;
 	}
 	return size;

@@ -1043,7 +1043,7 @@ static bool cpu_has_amd_erratum(struct c
 	}
 
 	/* OSVW unavailable or ID unknown, match family-model-stepping range */
-	ms = (cpu->x86_model << 4) | cpu->x86_mask;
+	ms = (cpu->x86_model << 4) | cpu->x86_stepping;
 	while ((range = *erratum++))
 		if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) &&
 		    (ms >= AMD_MODEL_RANGE_START(range)) &&

@@ -134,7 +134,7 @@ static void init_centaur(struct cpuinfo_
 			clear_cpu_cap(c, X86_FEATURE_TSC);
 			break;
 		case 8:
-			switch (c->x86_mask) {
+			switch (c->x86_stepping) {
 			default:
 			name = "2";
 				break;

@@ -209,7 +209,7 @@ centaur_size_cache(struct cpuinfo_x86 *c
 	 *  - Note, it seems this may only be in engineering samples.
 	 */
 	if ((c->x86 == 6) && (c->x86_model == 9) &&
-				(c->x86_mask == 1) && (size == 65))
+				(c->x86_stepping == 1) && (size == 65))
 		size -= 1;
 	return size;
 }

@@ -652,7 +652,7 @@ void cpu_detect(struct cpuinfo_x86 *c)
 		cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
 		c->x86 = (tfms >> 8) & 0xf;
 		c->x86_model = (tfms >> 4) & 0xf;
-		c->x86_mask = tfms & 0xf;
+		c->x86_stepping	= tfms & 0xf;
 
 		if (c->x86 == 0xf)
 			c->x86 += (tfms >> 20) & 0xff;

@@ -1157,7 +1157,7 @@ static void identify_cpu(struct cpuinfo_
 	c->loops_per_jiffy = loops_per_jiffy;
 	c->x86_cache_size = 0;
 	c->x86_vendor = X86_VENDOR_UNKNOWN;
-	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
+	c->x86_model = c->x86_stepping = 0;	/* So far unknown... */
 	c->x86_vendor_id[0] = '\0'; /* Unset */
 	c->x86_model_id[0] = '\0';  /* Unset */
 	c->x86_max_cores = 1;

@@ -1403,8 +1403,8 @@ void print_cpu_info(struct cpuinfo_x86 *
 
 	printk(KERN_CONT " (family: 0x%x, model: 0x%x", c->x86, c->x86_model);
 
-	if (c->x86_mask || c->cpuid_level >= 0)
-		printk(KERN_CONT ", stepping: 0x%x)\n", c->x86_mask);
+	if (c->x86_stepping || c->cpuid_level >= 0)
+		pr_cont(", stepping: 0x%x)\n", c->x86_stepping);
 	else
 		printk(KERN_CONT ")\n");
 

@@ -212,7 +212,7 @@ static void init_cyrix(struct cpuinfo_x8
 
 	/* common case step number/rev -- exceptions handled below */
 	c->x86_model = (dir1 >> 4) + 1;
-	c->x86_mask = dir1 & 0xf;
+	c->x86_stepping = dir1 & 0xf;
 
 	/* Now cook; the original recipe is by Channing Corn, from Cyrix.
 	 * We do the same thing for each generation: we work out

@@ -80,7 +80,7 @@ static bool bad_spectre_microcode(struct
 
 	for (i = 0; i < ARRAY_SIZE(spectre_bad_microcodes); i++) {
 		if (c->x86_model == spectre_bad_microcodes[i].model &&
-		    c->x86_mask == spectre_bad_microcodes[i].stepping)
+		    c->x86_stepping == spectre_bad_microcodes[i].stepping)
 			return (c->microcode <= spectre_bad_microcodes[i].microcode);
 	}
 	return false;

@@ -130,7 +130,7 @@ static void early_init_intel(struct cpui
 	 * need the microcode to have already been loaded... so if it is
 	 * not, recommend a BIOS update and disable large pages.
 	 */
-	if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2 &&
+	if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_stepping <= 2 &&
 	    c->microcode < 0x20e) {
 		printk(KERN_WARNING "Atom PSE erratum detected, BIOS microcode update recommended\n");
 		clear_cpu_cap(c, X86_FEATURE_PSE);

@@ -146,7 +146,7 @@ static void early_init_intel(struct cpui
 
 	/* CPUID workaround for 0F33/0F34 CPU */
 	if (c->x86 == 0xF && c->x86_model == 0x3
-	    && (c->x86_mask == 0x3 || c->x86_mask == 0x4))
+	    && (c->x86_stepping == 0x3 || c->x86_stepping == 0x4))
 		c->x86_phys_bits = 36;
 
 	/*

@@ -246,8 +246,8 @@ int ppro_with_ram_bug(void)
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
 	    boot_cpu_data.x86 == 6 &&
 	    boot_cpu_data.x86_model == 1 &&
-	    boot_cpu_data.x86_mask < 8) {
-		printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
+	    boot_cpu_data.x86_stepping < 8) {
+		pr_info("Pentium Pro with Errata#50 detected. Taking evasive action.\n");
 		return 1;
 	}
 	return 0;

@@ -263,7 +263,7 @@ static void intel_smp_check(struct cpuin
 	 * Mask B, Pentium, but not Pentium MMX
 	 */
 	if (c->x86 == 5 &&
-	    c->x86_mask >= 1 && c->x86_mask <= 4 &&
+	    c->x86_stepping >= 1 && c->x86_stepping <= 4 &&
 	    c->x86_model <= 3) {
 		/*
 		 * Remember we have B step Pentia with bugs

@@ -306,7 +306,7 @@ static void intel_workarounds(struct cpu
 	 * SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until
 	 * model 3 mask 3
 	 */
-	if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
+	if ((c->x86<<8 | c->x86_model<<4 | c->x86_stepping) < 0x633)
 		clear_cpu_cap(c, X86_FEATURE_SEP);
 
 	/*

@@ -324,7 +324,7 @@ static void intel_workarounds(struct cpu
 	 * P4 Xeon errata 037 workaround.
 	 * Hardware prefetcher may cause stale data to be loaded into the cache.
 	 */
-	if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
+	if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_stepping == 1)) {
 		if (msr_set_bit(MSR_IA32_MISC_ENABLE,
 				MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT)
 		    > 0) {

@@ -340,7 +340,7 @@ static void intel_workarounds(struct cpu
 	 * Specification Update").
 	 */
 	if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
-	    (c->x86_mask < 0x6 || c->x86_mask == 0xb))
+	    (c->x86_stepping < 0x6 || c->x86_stepping == 0xb))
 		set_cpu_bug(c, X86_BUG_11AP);
 
 

@@ -555,7 +555,7 @@ static void init_intel(struct cpuinfo_x8
 		case 6:
 			if (l2 == 128)
 				p = "Celeron (Mendocino)";
-			else if (c->x86_mask == 0 || c->x86_mask == 5)
+			else if (c->x86_stepping == 0 || c->x86_stepping == 5)
 				p = "Celeron-A";
 			break;
 

@@ -1013,7 +1013,7 @@ static bool is_blacklisted(unsigned int
 	 */
 	if (c->x86 == 6 &&
 	    c->x86_model == 79 &&
-	    c->x86_mask == 0x01 &&
+	    c->x86_stepping == 0x01 &&
 	    llc_size_per_core > 2621440 &&
 	    c->microcode < 0x0b000021) {
 		pr_err_once("Erratum BDF90: late loading with revision < 0x0b000021 (0x%x) disabled.\n", c->microcode);

@@ -1036,7 +1036,7 @@ static enum ucode_state request_microcod
 		return UCODE_NFOUND;
 
 	sprintf(name, "intel-ucode/%02x-%02x-%02x",
-		c->x86, c->x86_model, c->x86_mask);
+		c->x86, c->x86_model, c->x86_stepping);
 
 	if (request_firmware_direct(&firmware, name, device)) {
 		pr_debug("data file %s load failed\n", name);

@@ -860,7 +860,7 @@ int generic_validate_add_page(unsigned l
 	 */
 	if (is_cpu(INTEL) && boot_cpu_data.x86 == 6 &&
 	    boot_cpu_data.x86_model == 1 &&
-	    boot_cpu_data.x86_mask <= 7) {
+	    boot_cpu_data.x86_stepping <= 7) {
 		if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) {
 			pr_warning("mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
 			return -EINVAL;

@@ -699,8 +699,8 @@ void __init mtrr_bp_init(void)
 			if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
 			    boot_cpu_data.x86 == 0xF &&
 			    boot_cpu_data.x86_model == 0x3 &&
-			    (boot_cpu_data.x86_mask == 0x3 ||
-			     boot_cpu_data.x86_mask == 0x4))
+			    (boot_cpu_data.x86_stepping == 0x3 ||
+			     boot_cpu_data.x86_stepping == 0x4))
 				phys_addr = 36;
 
 			size_or_mask = SIZE_OR_MASK_BITS(phys_addr);

@@ -3052,7 +3052,7 @@ static int intel_snb_pebs_broken(int cpu
 		break;
 
 	case 45: /* SNB-EP */
-		switch (cpu_data(cpu).x86_mask) {
+		switch (cpu_data(cpu).x86_stepping) {
 		case 6: rev = 0x618; break;
 		case 7: rev = 0x70c; break;
 		}

@@ -1017,7 +1017,7 @@ void __init intel_pmu_lbr_init_atom(void
 	 * on PMU interrupt
 	 */
 	if (boot_cpu_data.x86_model == 28
-	    && boot_cpu_data.x86_mask < 10) {
+	    && boot_cpu_data.x86_stepping < 10) {
 		pr_cont("LBR disabled due to erratum");
 		return;
 	}

@@ -233,7 +233,7 @@ static __initconst const struct x86_pmu
 
 static __init void p6_pmu_rdpmc_quirk(void)
 {
-	if (boot_cpu_data.x86_mask < 9) {
+	if (boot_cpu_data.x86_stepping < 9) {
 		/*
 		 * PPro erratum 26; fixed in stepping 9 and above.
 		 */

@@ -70,8 +70,8 @@ static int show_cpuinfo(struct seq_file
 		   c->x86_model,
 		   c->x86_model_id[0] ? c->x86_model_id : "unknown");
 
-	if (c->x86_mask || c->cpuid_level >= 0)
-		seq_printf(m, "stepping\t: %d\n", c->x86_mask);
+	if (c->x86_stepping || c->cpuid_level >= 0)
+		seq_printf(m, "stepping\t: %d\n", c->x86_stepping);
 	else
 		seq_puts(m, "stepping\t: unknown\n");
 	if (c->microcode)

@@ -34,7 +34,7 @@
 #define X86		new_cpu_data+CPUINFO_x86
 #define X86_VENDOR	new_cpu_data+CPUINFO_x86_vendor
 #define X86_MODEL	new_cpu_data+CPUINFO_x86_model
-#define X86_MASK	new_cpu_data+CPUINFO_x86_mask
+#define X86_STEPPING	new_cpu_data+CPUINFO_x86_stepping
 #define X86_HARD_MATH	new_cpu_data+CPUINFO_hard_math
 #define X86_CPUID	new_cpu_data+CPUINFO_cpuid_level
 #define X86_CAPABILITY	new_cpu_data+CPUINFO_x86_capability

@@ -440,7 +440,7 @@ enable_paging:
 	shrb $4,%al
 	movb %al,X86_MODEL
 	andb $0x0f,%cl		# mask mask revision
-	movb %cl,X86_MASK
+	movb %cl,X86_STEPPING
 	movl %edx,X86_CAPABILITY
 
 is486:

@@ -407,7 +407,7 @@ static inline void __init construct_defa
 	processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
 	processor.cpuflag = CPU_ENABLED;
 	processor.cpufeature = (boot_cpu_data.x86 << 8) |
-	    (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
+	    (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_stepping;
 	processor.featureflag = boot_cpu_data.x86_capability[0];
 	processor.reserved[0] = 0;
 	processor.reserved[1] = 0;

@@ -166,7 +166,7 @@ static int via_rng_init(struct hwrng *rn
 	/* Enable secondary noise source on CPUs where it is present. */
 
 	/* Nehemiah stepping 8 and higher */
-	if ((c->x86_model == 9) && (c->x86_mask > 7))
+	if ((c->x86_model == 9) && (c->x86_stepping > 7))
 		lo |= VIA_NOISESRC2;
 
 	/* Esther */

@@ -639,7 +639,7 @@ static int acpi_cpufreq_blacklist(struct
 	if (c->x86_vendor == X86_VENDOR_INTEL) {
 		if ((c->x86 == 15) &&
 		    (c->x86_model == 6) &&
-		    (c->x86_mask == 8)) {
+		    (c->x86_stepping == 8)) {
 			printk(KERN_INFO "acpi-cpufreq: Intel(R) "
 			    "Xeon(R) 7100 Errata AL30, processors may "
 			    "lock up on frequency changes: disabling "

@@ -786,7 +786,7 @@ static int longhaul_cpu_init(struct cpuf
 		break;
 
 	case 7:
-		switch (c->x86_mask) {
+		switch (c->x86_stepping) {
 		case 0:
 			longhaul_version = TYPE_LONGHAUL_V1;
 			cpu_model = CPU_SAMUEL2;

@@ -798,7 +798,7 @@ static int longhaul_cpu_init(struct cpuf
 			break;
 		case 1 ... 15:
 			longhaul_version = TYPE_LONGHAUL_V2;
-			if (c->x86_mask < 8) {
+			if (c->x86_stepping < 8) {
 				cpu_model = CPU_SAMUEL2;
 				cpuname = "C3 'Samuel 2' [C5B]";
 			} else {

@@ -825,7 +825,7 @@ static int longhaul_cpu_init(struct cpuf
 		numscales = 32;
 		memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults));
 		memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr));
-		switch (c->x86_mask) {
+		switch (c->x86_stepping) {
 		case 0 ... 1:
 			cpu_model = CPU_NEHEMIAH;
 			cpuname = "C3 'Nehemiah A' [C5XLOE]";

@@ -176,7 +176,7 @@ static int cpufreq_p4_cpu_init(struct cp
 #endif
 
 	/* Errata workaround */
-	cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask;
+	cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_stepping;
 	switch (cpuid) {
 	case 0x0f07:
 	case 0x0f0a:

@@ -132,7 +132,7 @@ static int check_powernow(void)
 		return 0;
 	}
 
-	if ((c->x86_model == 6) && (c->x86_mask == 0)) {
+	if ((c->x86_model == 6) && (c->x86_stepping == 0)) {
 		printk(KERN_INFO PFX "K7 660[A0] core detected, "
 				"enabling errata workarounds\n");
 		have_a0 = 1;

@@ -36,7 +36,7 @@ struct cpu_id
 {
 	__u8	x86;            /* CPU family */
 	__u8	x86_model;	/* model */
-	__u8	x86_mask;	/* stepping */
+	__u8	x86_stepping;	/* stepping */
 };
 
 enum {

@@ -276,7 +276,7 @@ static int centrino_verify_cpu_id(const
 {
 	if ((c->x86 == x->x86) &&
 	    (c->x86_model == x->x86_model) &&
-	    (c->x86_mask == x->x86_mask))
+	    (c->x86_stepping == x->x86_stepping))
 		return 1;
 	return 0;
 }

@@ -270,9 +270,9 @@ unsigned int speedstep_detect_processor(
 		ebx = cpuid_ebx(0x00000001);
 		ebx &= 0x000000FF;
 
-		pr_debug("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
+		pr_debug("ebx value is %x, x86_stepping is %x\n", ebx, c->x86_stepping);
 
-		switch (c->x86_mask) {
+		switch (c->x86_stepping) {
 		case 4:
 			/*
 			 * B-stepping [M-P4-M]

@@ -359,7 +359,7 @@ unsigned int speedstep_detect_processor(
 				msr_lo, msr_hi);
 		if ((msr_hi & (1<<18)) &&
 		    (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
-			if (c->x86_mask == 0x01) {
+			if (c->x86_stepping == 0x01) {
 				pr_debug("early PIII version\n");
 				return SPEEDSTEP_CPU_PIII_C_EARLY;
 			} else

@@ -535,7 +535,7 @@ static int __init padlock_init(void)
 
 	printk(KERN_NOTICE PFX "Using VIA PadLock ACE for AES algorithm.\n");
 
-	if (c->x86 == 6 && c->x86_model == 15 && c->x86_mask == 2) {
+	if (c->x86 == 6 && c->x86_model == 15 && c->x86_stepping == 2) {
 		ecb_fetch_blocks = MAX_ECB_FETCH_BLOCKS;
 		cbc_fetch_blocks = MAX_CBC_FETCH_BLOCKS;
 		printk(KERN_NOTICE PFX "VIA Nano stepping 2 detected: enabling workaround.\n");

@@ -2715,7 +2715,7 @@ static struct amd64_family_type *per_fam
 	struct amd64_family_type *fam_type = NULL;
 
 	pvt->ext_model  = boot_cpu_data.x86_model >> 4;
-	pvt->stepping	= boot_cpu_data.x86_mask;
+	pvt->stepping	= boot_cpu_data.x86_stepping;
 	pvt->model	= boot_cpu_data.x86_model;
 	pvt->fam	= boot_cpu_data.x86;
 

@@ -760,7 +760,7 @@ int amd_decode_mce(struct notifier_block
 
 	pr_emerg(HW_ERR "CPU:%d (%x:%x:%x) MC%d_STATUS[%s|%s|%s|%s|%s",
 		m->extcpu,
-		c->x86, c->x86_model, c->x86_mask,
+		c->x86, c->x86_model, c->x86_stepping,
 		m->bank,
 		((m->status & MCI_STATUS_OVER)	? "Over"  : "-"),
 		((m->status & MCI_STATUS_UC)	? "UE"	  :

@@ -269,13 +269,13 @@ static int adjust_tjmax(struct cpuinfo_x
 	for (i = 0; i < ARRAY_SIZE(tjmax_model_table); i++) {
 		const struct tjmax_model *tm = &tjmax_model_table[i];
 		if (c->x86_model == tm->model &&
-		    (tm->mask == ANY || c->x86_mask == tm->mask))
+		    (tm->mask == ANY || c->x86_stepping == tm->mask))
 			return tm->tjmax;
 	}
 
 	/* Early chips have no MSR for TjMax */
 
-	if (c->x86_model == 0xf && c->x86_mask < 4)
+	if (c->x86_model == 0xf && c->x86_stepping < 4)
 		usemsr_ee = 0;
 
 	if (c->x86_model > 0xe && usemsr_ee) {

@@ -426,7 +426,7 @@ static int chk_ucode_version(unsigned in
 	 * Readings might stop update when processor visited too deep sleep,
 	 * fixed for stepping D0 (6EC).
 	 */
-	if (c->x86_model == 0xe && c->x86_mask < 0xc && c->microcode < 0x39) {
+	if (c->x86_model == 0xe && c->x86_stepping < 0xc && c->microcode < 0x39) {
 		pr_err("Errata AE18 not fixed, update BIOS or microcode of the CPU!\n");
 		return -ENODEV;
 	}

@@ -293,7 +293,7 @@ u8 vid_which_vrm(void)
 	if (c->x86 < 6)		/* Any CPU with family lower than 6 */
 		return 0;	/* doesn't have VID */
 
-	vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_mask, c->x86_vendor);
+	vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_stepping, c->x86_vendor);
 	if (vrm_ret == 134)
 		vrm_ret = get_via_model_d_vrm();
 	if (vrm_ret == 0)

@@ -179,7 +179,7 @@ static bool has_erratum_319(struct pci_d
 	 * and AM3 formats, but that's the best we can do.
 	 */
 	return boot_cpu_data.x86_model < 4 ||
-	       (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask <= 2);
+	       (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_stepping <= 2);
 }
 
 static int k10temp_probe(struct pci_dev *pdev,

@@ -187,7 +187,7 @@ static int k8temp_probe(struct pci_dev *
 		return -ENOMEM;
 
 	model = boot_cpu_data.x86_model;
-	stepping = boot_cpu_data.x86_mask;
+	stepping = boot_cpu_data.x86_stepping;
 
 	/* feature available since SH-C0, exclude older revisions */
 	if ((model == 4 && stepping == 0) ||

@@ -127,7 +127,7 @@ void gx_set_dclk_frequency(struct fb_inf
 	int timeout = 1000;
 
 	/* Rev. 1 Geode GXs use a 14 MHz reference clock instead of 48 MHz. */
-	if (cpu_data(0).x86_mask == 1) {
+	if (cpu_data(0).x86_stepping == 1) {
 		pll_table = gx_pll_table_14MHz;
 		pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz);
 	} else {

From: Mark Gross <[email protected]>

commit e9d7144597b10ff13ff2264c059f7d4a7fbc89ac upstream

Intel uses the same family/model for several CPUs. Sometimes the stepping must be checked to tell them apart.

On x86 there can be at most 16 steppings. Add a steppings bitmask to x86_cpu_id and a X86_MATCH_VENDOR_FAMILY_MODEL_STEPPING_FEATURE macro and support for matching against family/model/stepping.

[ bp: Massage.
tglx: Lightweight variant for backporting ]

---
 arch/x86/include/asm/cpu_device_id.h |   27 +++++++++++++++++++++++++++
 arch/x86/kernel/cpu/match.c          |    7 ++++++-
 include/linux/mod_devicetable.h      |    6 ++++++
 3 files changed, 39 insertions(+), 1 deletion(-)

@@ -8,6 +8,33 @@
 
 #include <linux/mod_devicetable.h>
 
+#define X86_STEPPINGS(mins, maxs)    GENMASK(maxs, mins)
+
+/**
+ * X86_MATCH_VENDOR_FAM_MODEL_STEPPINGS_FEATURE - Base macro for CPU matching
+ * @_vendor:	The vendor name, e.g. INTEL, AMD, HYGON, ..., ANY
+ *		The name is expanded to X86_VENDOR_@_vendor
+ * @_family:	The family number or X86_FAMILY_ANY
+ * @_model:	The model number, model constant or X86_MODEL_ANY
+ * @_steppings:	Bitmask for steppings, stepping constant or X86_STEPPING_ANY
+ * @_feature:	A X86_FEATURE bit or X86_FEATURE_ANY
+ * @_data:	Driver specific data or NULL. The internal storage
+ *		format is unsigned long. The supplied value, pointer
+ *		etc. is casted to unsigned long internally.
+ *
+ * Backport version to keep the SRBDS pile consistant. No shorter variants
+ * required for this.
+ */
+#define X86_MATCH_VENDOR_FAM_MODEL_STEPPINGS_FEATURE(_vendor, _family, _model, \
+						    _steppings, _feature, _data) { \
+	.vendor		= X86_VENDOR_##_vendor,				\
+	.family		= _family,					\
+	.model		= _model,					\
+	.steppings	= _steppings,					\
+	.feature	= _feature,					\
+	.driver_data	= (unsigned long) _data				\
+}
+
 extern const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match);
 
 #endif

@@ -33,13 +33,18 @@ const struct x86_cpu_id *x86_match_cpu(c
 	const struct x86_cpu_id *m;
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 
-	for (m = match; m->vendor | m->family | m->model | m->feature; m++) {
+	for (m = match;
+	     m->vendor | m->family | m->model | m->steppings | m->feature;
+	     m++) {
 		if (m->vendor != X86_VENDOR_ANY && c->x86_vendor != m->vendor)
 			continue;
 		if (m->family != X86_FAMILY_ANY && c->x86 != m->family)
 			continue;
 		if (m->model != X86_MODEL_ANY && c->x86_model != m->model)
 			continue;
+		if (m->steppings != X86_STEPPING_ANY &&
+		    !(BIT(c->x86_stepping) & m->steppings))
+			continue;
 		if (m->feature != X86_FEATURE_ANY && !cpu_has(c, m->feature))
 			continue;
 		return m;

@@ -572,6 +572,10 @@ struct mips_cdmm_device_id {
 /*
  * MODULE_DEVICE_TABLE expects this struct to be called x86cpu_device_id.
  * Although gcc seems to ignore this error, clang fails without this define.
+ *
+ * Note: The ordering of the struct is different from upstream because the
+ * static initializers in kernels < 5.7 still use C89 style while upstream
+ * has been converted to proper C99 initializers.
  */
 #define x86cpu_device_id x86_cpu_id
 struct x86_cpu_id {

@@ -580,6 +584,7 @@ struct x86_cpu_id {
 	__u16 model;
 	__u16 feature;	/* bit index */
 	kernel_ulong_t driver_data;
+	__u16 steppings;
 };
 
 #define X86_FEATURE_MATCH(x) \

@@ -588,6 +593,7 @@ struct x86_cpu_id {
 #define X86_VENDOR_ANY 0xffff
 #define X86_FAMILY_ANY 0
 #define X86_MODEL_ANY  0
+#define X86_STEPPING_ANY 0
 #define X86_FEATURE_ANY 0	/* Same as FPU, you can't test for that */
 
 /*

From: Mark Gross <[email protected]>

commit 93920f61c2ad7edb01e63323832585796af75fc9 upstream

To make cpu_matches() reusable for other matching tables, have it take a pointer to a x86_cpu_id table as an argument.

[ bp: Flip arguments order. ]

---
 arch/x86/kernel/cpu/common.c |   23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

@@ -912,9 +912,9 @@ static const __initconst struct x86_cpu_
 	{}
 };
 
-static bool __init cpu_matches(unsigned long which)
+static bool __init cpu_matches(const struct x86_cpu_id *table, unsigned long which)
 {
-	const struct x86_cpu_id *m = x86_match_cpu(cpu_vuln_whitelist);
+	const struct x86_cpu_id *m = x86_match_cpu(table);
 
 	return m && !!(m->driver_data & which);
 }

@@ -934,29 +934,32 @@ static void __init cpu_set_bug_bits(stru
 	u64 ia32_cap = x86_read_arch_cap_msr();
 
 	/* Set ITLB_MULTIHIT bug if cpu is not in the whitelist and not mitigated */
-	if (!cpu_matches(NO_ITLB_MULTIHIT) && !(ia32_cap & ARCH_CAP_PSCHANGE_MC_NO))
+	if (!cpu_matches(cpu_vuln_whitelist, NO_ITLB_MULTIHIT) &&
+	    !(ia32_cap & ARCH_CAP_PSCHANGE_MC_NO))
 		setup_force_cpu_bug(X86_BUG_ITLB_MULTIHIT);
 
-	if (cpu_matches(NO_SPECULATION))
+	if (cpu_matches(cpu_vuln_whitelist, NO_SPECULATION))
 		return;
 
 	setup_force_cpu_bug(X86_BUG_SPECTRE_V1);
 	setup_force_cpu_bug(X86_BUG_SPECTRE_V2);
 
-	if (!cpu_matches(NO_SSB) && !(ia32_cap & ARCH_CAP_SSB_NO) &&
+	if (!cpu_matches(cpu_vuln_whitelist, NO_SSB) &&
+	    !(ia32_cap & ARCH_CAP_SSB_NO) &&
 	   !cpu_has(c, X86_FEATURE_AMD_SSB_NO))
 		setup_force_cpu_bug(X86_BUG_SPEC_STORE_BYPASS);
 
 	if (ia32_cap & ARCH_CAP_IBRS_ALL)
 		setup_force_cpu_cap(X86_FEATURE_IBRS_ENHANCED);
 
-	if (!cpu_matches(NO_MDS) && !(ia32_cap & ARCH_CAP_MDS_NO)) {
+	if (!cpu_matches(cpu_vuln_whitelist, NO_MDS) &&
+	    !(ia32_cap & ARCH_CAP_MDS_NO)) {
 		setup_force_cpu_bug(X86_BUG_MDS);
-		if (cpu_matches(MSBDS_ONLY))
+		if (cpu_matches(cpu_vuln_whitelist, MSBDS_ONLY))
 			setup_force_cpu_bug(X86_BUG_MSBDS_ONLY);
 	}
 
-	if (!cpu_matches(NO_SWAPGS))
+	if (!cpu_matches(cpu_vuln_whitelist, NO_SWAPGS))
 		setup_force_cpu_bug(X86_BUG_SWAPGS);
 
 	/*

@@ -974,7 +977,7 @@ static void __init cpu_set_bug_bits(stru
 	     (ia32_cap & ARCH_CAP_TSX_CTRL_MSR)))
 		setup_force_cpu_bug(X86_BUG_TAA);
 
-	if (cpu_matches(NO_MELTDOWN))
+	if (cpu_matches(cpu_vuln_whitelist, NO_MELTDOWN))
 		return;
 
 	/* Rogue Data Cache Load? No! */

@@ -983,7 +986,7 @@ static void __init cpu_set_bug_bits(stru
 
 	setup_force_cpu_bug(X86_BUG_CPU_MELTDOWN);
 
-	if (cpu_matches(NO_L1TF))
+	if (cpu_matches(cpu_vuln_whitelist, NO_L1TF))
 		return;
 
 	setup_force_cpu_bug(X86_BUG_L1TF);

From: Mark Gross <[email protected]>

commit 7e5b3c267d256822407a22fdce6afdf9cd13f9fb upstream

SRBDS is an MDS-like speculative side channel that can leak bits from the random number generator (RNG) across cores and threads. New microcode serializes the processor access during the execution of RDRAND and RDSEED. This ensures that the shared buffer is overwritten before it is released for reuse.

While it is present on all affected CPU models, the microcode mitigation is not needed on models that enumerate ARCH_CAPABILITIES[MDS_NO] in the cases where TSX is not supported or has been disabled with TSX_CTRL.

The mitigation is activated by default on affected processors and it increases latency for RDRAND and RDSEED instructions. Among other effects this will reduce throughput from /dev/urandom.

* Enable administrator to configure the mitigation off when desired using either mitigations=off or srbds=off.

* Export vulnerability status via sysfs

* Rename file-scoped macros to apply for non-whitelist table initializations.

[ bp: Massage,
- s/VULNBL_INTEL_STEPPING/VULNBL_INTEL_STEPPINGS/g,
- do not read arch cap MSR a second time in tsx_fused_off() - just pass it in,
- flip check in cpu_set_bug_bits() to save an indentation level,
- reflow comments.
jpoimboe: s/Mitigated/Mitigation/ in user-visible strings
tglx: Dropped the fused off magic for now
]

---
 Documentation/ABI/testing/sysfs-devices-system-cpu |    1 
 Documentation/kernel-parameters.txt                |   20 +++
 arch/x86/include/asm/cpufeatures.h                 |    2 
 arch/x86/include/asm/msr-index.h                   |    4 
 arch/x86/kernel/cpu/bugs.c                         |  106 +++++++++++++++++++++
 arch/x86/kernel/cpu/common.c                       |   31 ++++++
 arch/x86/kernel/cpu/cpu.h                          |    1 
 drivers/base/cpu.c                                 |    8 +
 8 files changed, 173 insertions(+)

@@ -279,6 +279,7 @@ What:		/sys/devices/system/cpu/vulnerabi
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/l1tf
 		/sys/devices/system/cpu/vulnerabilities/mds
+		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
 Date:		January 2018

@@ -3787,6 +3787,26 @@ bytes respectively. Such letter suffixes
 	spia_pedr=
 	spia_peddr=
 
+	srbds=		[X86,INTEL]
+			Control the Special Register Buffer Data Sampling
+			(SRBDS) mitigation.
+
+			Certain CPUs are vulnerable to an MDS-like
+			exploit which can leak bits from the random
+			number generator.
+
+			By default, this issue is mitigated by
+			microcode.  However, the microcode fix can cause
+			the RDRAND and RDSEED instructions to become
+			much slower.  Among other effects, this will
+			result in reduced throughput from /dev/urandom.
+
+			The microcode mitigation can be disabled with
+			the following option:
+
+			off:    Disable mitigation and remove
+				performance impact to RDRAND and RDSEED
+
 	stack_guard_gap=	[MM]
 			override the default stack gap protection. The value
 			is in page units and it defines how many pages prior

@@ -312,6 +312,7 @@
 /* Intel-defined CPU features, CPUID level 0x00000007:0 (EDX), word 18 */
 #define X86_FEATURE_AVX512_4VNNIW	(18*32+ 2) /* AVX-512 Neural Network Instructions */
 #define X86_FEATURE_AVX512_4FMAPS	(18*32+ 3) /* AVX-512 Multiply Accumulation Single precision */
+#define X86_FEATURE_SRBDS_CTRL		(18*32+ 9) /* "" SRBDS mitigation MSR available */
 #define X86_FEATURE_MD_CLEAR		(18*32+10) /* VERW clears CPU buffers */
 #define X86_FEATURE_SPEC_CTRL		(18*32+26) /* "" Speculation Control (IBRS + IBPB) */
 #define X86_FEATURE_INTEL_STIBP		(18*32+27) /* "" Single Thread Indirect Branch Predictors */

@@ -343,5 +344,6 @@
 #define X86_BUG_SWAPGS		X86_BUG(21) /* CPU is affected by speculation through SWAPGS */
 #define X86_BUG_TAA		X86_BUG(22) /* CPU is affected by TSX Async Abort(TAA) */
 #define X86_BUG_ITLB_MULTIHIT	X86_BUG(23) /* CPU may incur MCE during certain page attribute changes */
+#define X86_BUG_SRBDS		X86_BUG(24) /* CPU may leak RNG bits if not mitigated */
 
 #endif /* _ASM_X86_CPUFEATURES_H */

@@ -91,6 +91,10 @@
 #define TSX_CTRL_RTM_DISABLE		BIT(0)	/* Disable RTM feature */
 #define TSX_CTRL_CPUID_CLEAR		BIT(1)	/* Disable TSX enumeration */
 
+/* SRBDS support */
+#define MSR_IA32_MCU_OPT_CTRL		0x00000123
+#define RNGDS_MITG_DIS			BIT(0)
+
 #define MSR_IA32_SYSENTER_CS		0x00000174
 #define MSR_IA32_SYSENTER_ESP		0x00000175
 #define MSR_IA32_SYSENTER_EIP		0x00000176

@@ -912,6 +912,27 @@ static const __initconst struct x86_cpu_
 	{}
 };
 
+#define VULNBL_INTEL_STEPPINGS(model, steppings, issues)		   \
+	X86_MATCH_VENDOR_FAM_MODEL_STEPPINGS_FEATURE(INTEL, 6,		   \
+					    INTEL_FAM6_##model, steppings, \
+					    X86_FEATURE_ANY, issues)
+
+#define SRBDS		BIT(0)
+
+static const struct x86_cpu_id cpu_vuln_blacklist[] __initconst = {
+	VULNBL_INTEL_STEPPINGS(IVYBRIDGE,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(HASWELL_CORE,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(HASWELL_ULT,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(HASWELL_GT3E,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(BROADWELL_GT3E,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(BROADWELL_CORE,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(SKYLAKE_MOBILE,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(SKYLAKE_DESKTOP,	X86_STEPPING_ANY,		SRBDS),
+	VULNBL_INTEL_STEPPINGS(KABYLAKE_MOBILE,	X86_STEPPINGS(0x0, 0xC),	SRBDS),
+	VULNBL_INTEL_STEPPINGS(KABYLAKE_DESKTOP,X86_STEPPINGS(0x0, 0xD),	SRBDS),
+	{}
+};
+
 static bool __init cpu_matches(const struct x86_cpu_id *table, unsigned long which)
 {
 	const struct x86_cpu_id *m = x86_match_cpu(table);

@@ -977,6 +998,15 @@ static void __init cpu_set_bug_bits(stru
 	     (ia32_cap & ARCH_CAP_TSX_CTRL_MSR)))
 		setup_force_cpu_bug(X86_BUG_TAA);
 
+	/*
+	 * SRBDS affects CPUs which support RDRAND or RDSEED and are listed
+	 * in the vulnerability blacklist.
+	 */
+	if ((cpu_has(c, X86_FEATURE_RDRAND) ||
+	     cpu_has(c, X86_FEATURE_RDSEED)) &&
+	    cpu_matches(cpu_vuln_blacklist, SRBDS))
+		    setup_force_cpu_bug(X86_BUG_SRBDS);
+
 	if (cpu_matches(cpu_vuln_whitelist, NO_MELTDOWN))
 		return;
 

@@ -1330,6 +1360,7 @@ void identify_secondary_cpu(struct cpuin
 #endif
 	mtrr_ap_init();
 	x86_spec_ctrl_setup_ap();
+	update_srbds_msr();
 }
 
 struct msr_range {

@@ -64,6 +64,7 @@ extern void get_cpu_cap(struct cpuinfo_x
 extern void cpu_detect_cache_sizes(struct cpuinfo_x86 *c);
 
 extern void x86_spec_ctrl_setup_ap(void);
+extern void update_srbds_msr(void);
 
 extern u64 x86_read_arch_cap_msr(void);
 

@@ -549,6 +549,12 @@ ssize_t __weak cpu_show_itlb_multihit(st
 	return sprintf(buf, "Not affected\n");
 }
 
+ssize_t __weak cpu_show_srbds(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "Not affected\n");
+}
+
 static DEVICE_ATTR(meltdown, 0444, cpu_show_meltdown, NULL);
 static DEVICE_ATTR(spectre_v1, 0444, cpu_show_spectre_v1, NULL);
 static DEVICE_ATTR(spectre_v2, 0444, cpu_show_spectre_v2, NULL);

@@ -557,6 +563,7 @@ static DEVICE_ATTR(l1tf, 0444, cpu_show_
 static DEVICE_ATTR(mds, 0444, cpu_show_mds, NULL);
 static DEVICE_ATTR(tsx_async_abort, 0444, cpu_show_tsx_async_abort, NULL);
 static DEVICE_ATTR(itlb_multihit, 0444, cpu_show_itlb_multihit, NULL);
+static DEVICE_ATTR(srbds, 0444, cpu_show_srbds, NULL);
 
 static struct attribute *cpu_root_vulnerabilities_attrs[] = {
 	&dev_attr_meltdown.attr,

@@ -567,6 +574,7 @@ static struct attribute *cpu_root_vulner
 	&dev_attr_mds.attr,
 	&dev_attr_tsx_async_abort.attr,
 	&dev_attr_itlb_multihit.attr,
+	&dev_attr_srbds.attr,
 	NULL
 };
 

From: Mark Gross <[email protected]>

commit 7222a1b5b87417f22265c92deea76a6aecd0fb0f upstream

Add documentation for the SRBDS vulnerability and its mitigation.

[ bp: Massage.
jpoimboe: sysfs table strings. ]

---
 Documentation/hw-vuln/special-register-buffer-data-sampling.rst |  148 ++++++++++
 1 file changed, 148 insertions(+)
 create mode 100644 Documentation/hw-vuln/special-register-buffer-data-sampling.rst

@@ -0,0 +1,148 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+SRBDS - Special Register Buffer Data Sampling
+=============================================
+
+SRBDS is a hardware vulnerability that allows MDS :doc:`mds` techniques to
+infer values returned from special register accesses.  Special register
+accesses are accesses to off core registers.  According to Intel's evaluation,
+the special register reads that have a security expectation of privacy are
+RDRAND, RDSEED and SGX EGETKEY.
+
+When RDRAND, RDSEED and EGETKEY instructions are used, the data is moved
+to the core through the special register mechanism that is susceptible
+to MDS attacks.
+
+Affected processors
+--------------------
+Core models (desktop, mobile, Xeon-E3) that implement RDRAND and/or RDSEED may
+be affected.
+
+A processor is affected by SRBDS if its Family_Model and stepping is
+in the following list, with the exception of the listed processors
+exporting MDS_NO while Intel TSX is available yet not enabled. The
+latter class of processors are only affected when Intel TSX is enabled
+by software using TSX_CTRL_MSR otherwise they are not affected.
+
+  =============  ============  ========
+  common name    Family_Model  Stepping
+  =============  ============  ========
+  Haswell        06_3CH        All
+  Haswell_L      06_45H        All
+  Haswell_G      06_46H        All
+
+  Broadwell_G    06_47H        All
+  Broadwell      06_3DH        All
+
+  Skylake_L      06_4EH        All
+  Skylake        06_5EH        All
+
+  Kabylake_L     06_8EH        <=0xC
+
+  Kabylake       06_9EH        <=0xD
+  =============  ============  ========
+
+Related CVEs
+------------
+
+The following CVE entry is related to this SRBDS issue:
+
+    ==============  =====  =====================================
+    CVE-2020-0543   SRBDS  Special Register Buffer Data Sampling
+    ==============  =====  =====================================
+
+Attack scenarios
+----------------
+An unprivileged user can extract values returned from RDRAND and RDSEED
+executed on another core or sibling thread using MDS techniques.
+
+
+Mitigation mechanism
+-------------------
+Intel will release microcode updates that modify the RDRAND, RDSEED, and
+EGETKEY instructions to overwrite secret special register data in the shared
+staging buffer before the secret data can be accessed by another logical
+processor.
+
+During execution of the RDRAND, RDSEED, or EGETKEY instructions, off-core
+accesses from other logical processors will be delayed until the special
+register read is complete and the secret data in the shared staging buffer is
+overwritten.
+
+This has three effects on performance:
+
+#. RDRAND, RDSEED, or EGETKEY instructions have higher latency.
+
+#. Executing RDRAND at the same time on multiple logical processors will be
+   serialized, resulting in an overall reduction in the maximum RDRAND
+   bandwidth.
+
+#. Executing RDRAND, RDSEED or EGETKEY will delay memory accesses from other
+   logical processors that miss their core caches, with an impact similar to
+   legacy locked cache-line-split accesses.
+
+The microcode updates provide an opt-out mechanism (RNGDS_MITG_DIS) to disable
+the mitigation for RDRAND and RDSEED instructions executed outside of Intel
+Software Guard Extensions (Intel SGX) enclaves. On logical processors that
+disable the mitigation using this opt-out mechanism, RDRAND and RDSEED do not
+take longer to execute and do not impact performance of sibling logical
+processors memory accesses. The opt-out mechanism does not affect Intel SGX
+enclaves (including execution of RDRAND or RDSEED inside an enclave, as well
+as EGETKEY execution).
+
+IA32_MCU_OPT_CTRL MSR Definition
+--------------------------------
+Along with the mitigation for this issue, Intel added a new thread-scope
+IA32_MCU_OPT_CTRL MSR, (address 0x123). The presence of this MSR and
+RNGDS_MITG_DIS (bit 0) is enumerated by CPUID.(EAX=07H,ECX=0).EDX[SRBDS_CTRL =
+9]==1. This MSR is introduced through the microcode update.
+
+Setting IA32_MCU_OPT_CTRL[0] (RNGDS_MITG_DIS) to 1 for a logical processor
+disables the mitigation for RDRAND and RDSEED executed outside of an Intel SGX
+enclave on that logical processor. Opting out of the mitigation for a
+particular logical processor does not affect the RDRAND and RDSEED mitigations
+for other logical processors.
+
+Note that inside of an Intel SGX enclave, the mitigation is applied regardless
+of the value of RNGDS_MITG_DS.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows control over the SRBDS mitigation at boot time
+with the option "srbds=".  The option for this is:
+
+  ============= =============================================================
+  off           This option disables SRBDS mitigation for RDRAND and RDSEED on
+                affected platforms.
+  ============= =============================================================
+
+SRBDS System Information
+-----------------------
+The Linux kernel provides vulnerability status information through sysfs.  For
+SRBDS this can be accessed by the following sysfs file:
+/sys/devices/system/cpu/vulnerabilities/srbds
+
+The possible values contained in this file are:
+
+ ============================== =============================================
+ Not affected                   Processor not vulnerable
+ Vulnerable                     Processor vulnerable and mitigation disabled
+ Vulnerable: No microcode       Processor vulnerable and microcode is missing
+                                mitigation
+ Mitigation: Microcode          Processor is vulnerable and mitigation is in
+                                effect.
+ Mitigation: TSX disabled       Processor is only vulnerable when TSX is
+                                enabled while this system was booted with TSX
+                                disabled.
+ Unknown: Dependent on
+ hypervisor status              Running on virtual guest processor that is
+                                affected but with no way to know if host
+                                processor is mitigated or vulnerable.
+ ============================== =============================================
+
+SRBDS Default mitigation
+------------------------
+This new microcode serializes processor access during execution of RDRAND,
+RDSEED ensures that the shared buffer is overwritten before it is released for
+reuse.  Use the "srbds=off" kernel command line to disable the mitigation for
+RDRAND and RDSEED.

From: Josh Poimboeuf <[email protected]>

commit 3798cc4d106e91382bfe016caa2edada27c2bb3f upstream

Make the docs match the code.

---
 Documentation/hw-vuln/special-register-buffer-data-sampling.rst |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

@@ -27,6 +27,8 @@ by software using TSX_CTRL_MSR otherwise
   =============  ============  ========
   common name    Family_Model  Stepping
   =============  ============  ========
+  IvyBridge      06_3AH        All
+
   Haswell        06_3CH        All
   Haswell_L      06_45H        All
   Haswell_G      06_46H        All

@@ -37,9 +39,8 @@ by software using TSX_CTRL_MSR otherwise
   Skylake_L      06_4EH        All
   Skylake        06_5EH        All
 
-  Kabylake_L     06_8EH        <=0xC
-
-  Kabylake       06_9EH        <=0xD
+  Kabylake_L     06_8EH        <= 0xC
+  Kabylake       06_9EH        <= 0xD
   =============  ============  ========
 
 Related CVEs

From: Mathieu Othacehe <[email protected]>

[ Upstream commit 18dfb5326370991c81a6d1ed6d1aeee055cb8c05 ]

The bytes returned by the i2c reading need to be swapped unconditionally. Otherwise, on be16 platforms, an incorrect value will be returned.

Taking the slow path via next merge window as its been around a while and we have a patch set dependent on this which would be held up.

---
 drivers/iio/light/vcnl4000.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

index c9d85bbc9230..a17891511be5 100644
@@ -56,7 +56,6 @@ static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
 				u8 rdy_mask, u8 data_reg, int *val)
 {
 	int tries = 20;
-	__be16 buf;
 	int ret;
 
 	ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND,

@@ -80,12 +79,11 @@ static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
 		return -EIO;
 	}
 
-	ret = i2c_smbus_read_i2c_block_data(data->client,
-		data_reg, sizeof(buf), (u8 *) &buf);
+	ret = i2c_smbus_read_word_swapped(data->client, data_reg);
 	if (ret < 0)
 		return ret;
 
-	*val = be16_to_cpu(buf);
+	*val = ret;
 
 	return 0;
 }

2.25.1

From: Oleg Nesterov <[email protected]>

commit 013b2deba9a6b80ca02f4fafd7dedf875e9b4450 upstream.

uprobe_write_opcode() must not cross page boundary; prepare_uprobe() relies on arch_uprobe_analyze_insn() which should validate "vaddr" but some architectures (csky, s390, and sparc) don't do this.

We can remove the BUG_ON() check in prepare_uprobe() and validate the offset early in __uprobe_register(). The new IS_ALIGNED() check matches the alignment check in arch_prepare_kprobe() on supported architectures, so I think that all insns must be aligned to UPROBE_SWBP_INSN_SIZE.

Another problem is __update_ref_ctr() which was wrong from the very beginning, it can read/write outside of kmap'ed page unless "vaddr" is aligned to sizeof(short), __uprobe_register() should check this too.

---
 kernel/events/uprobes.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

@@ -602,10 +602,6 @@ static int prepare_uprobe(struct uprobe
 	if (ret)
 		goto out;
 
-	/* uprobe_write_opcode() assumes we don't cross page boundary */
-	BUG_ON((uprobe->offset & ~PAGE_MASK) +
-			UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
-
 	smp_wmb(); /* pairs with the smp_rmb() in handle_swbp() */
 	set_bit(UPROBE_COPY_INSN, &uprobe->flags);
 

@@ -884,6 +880,15 @@ int uprobe_register(struct inode *inode,
 	if (offset > i_size_read(inode))
 		return -EINVAL;
 
+	/*
+	 * This ensures that copy_from_page(), copy_to_page() and
+	 * __update_ref_ctr() can't cross page boundary.
+	 */
+	if (!IS_ALIGNED(offset, UPROBE_SWBP_INSN_SIZE))
+		return -EINVAL;
+	if (!IS_ALIGNED(ref_ctr_offset, sizeof(short)))
+		return -EINVAL;
+
  retry:
 	uprobe = alloc_uprobe(inode, offset);
 	if (!uprobe)

@@ -1692,6 +1697,9 @@ static int is_trap_at_addr(struct mm_str
 	uprobe_opcode_t opcode;
 	int result;
 
+	if (WARN_ON_ONCE(!IS_ALIGNED(vaddr, UPROBE_SWBP_INSN_SIZE)))
+		return -EINVAL;
+
 	pagefault_disable();
 	result = __copy_from_user_inatomic(&opcode, (void __user*)vaddr,
 							sizeof(opcode));