Skip to contentSkip to conversation

board: ti: am654: Disable SA2UL node for HS devices

PATCH New Andrew F. Davis 2 participants 2 messages Jun 9, 2020 – Jun 18, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 board: ti: am654: Disable SA2UL node for HS devices

On HS devices the access to SA2UL is restricted on the non-secure ARM side, disable the node in DT to prevent firewall violations. We used to only disable the TRNG but now that we have full SA2UL support in Linux, in which TRNG is a sub-module, disable both by disabling the parent SA2UL node.

---
 board/ti/am65x/evm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
board/ti/am65x/evm.c +3 -3
index a22900dcf9..20b75ba133 100644
@@ -108,10 +108,10 @@ int ft_board_setup(void *blob, bd_t *bd)
 	}
 
 #if defined(CONFIG_TI_SECURE_DEVICE)
-	/* Make HW RNG reserved for secure world use */
-	ret = fdt_disable_node(blob, "/interconnect at 100000/trng at 4e10000");
+	/* Make Crypto HW reserved for secure world use */
+	ret = fdt_disable_node(blob, "/interconnect at 100000/crypto at 4E00000");
 	if (ret)
-		printf("%s: disabling TRGN failed %d\n", __func__, ret);
+		printf("%s: disabling SA2UL failed %d\n", __func__, ret);
 #endif
 
 	return 0;
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 board: ti: am654: Disable SA2UL node for HS devices

Quoted 7 lines · Andrew F. Davis

On HS devices the access to SA2UL is restricted on the non-secure ARM side, disable the node in DT to prevent firewall violations. We used to only disable the TRNG but now that we have full SA2UL support in Linux, in which TRNG is a sub-module, disable both by disabling the parent SA2UL node.

Applied to u-boot-ti next.

Thanks and regards,
Lokesh