dt-bindings: Fix more incorrect 'reg' property sizes in examples
Subsystems (15)
Rob Herring
maintainerPATCH 1/1 dt-bindings: Fix more incorrect 'reg' property sizes in examples
The examples template is a 'simple-bus' with a size of 1 cell for had between 2 and 4 cells which really only errors on I2C or SPI type devices with a single cell.
The easiest fix in most cases is to change the 'reg' property to 1 cell for address and size.
Cc "Heiko Stübner" <[email protected]>
Cc Ezequiel Garcia <[email protected]>
Cc Mauro Carvalho Chehab <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Miquel Raynal <[email protected]>
Cc Richard Weinberger <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc Bjorn Andersson <[email protected]>
Cc Kishon Vijay Abraham I <[email protected]>
Cc Vinod Koul <[email protected]>
Cc Liam Girdwood <[email protected]>
Cc Mark Brown <[email protected]>
Signed-off-by Rob Herring <[email protected]>
--- Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml | 4 ++-- Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml | 4 ++-- .../devicetree/bindings/display/rockchip/rockchip-vop.yaml | 4 ++-- Documentation/devicetree/bindings/media/rockchip,vdec.yaml | 2 +- Documentation/devicetree/bindings/media/rockchip-vpu.yaml | 2 +- .../devicetree/bindings/mtd/arasan,nand-controller.yaml | 2 +- Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml | 2 +- .../devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml | 2 +- Documentation/devicetree/bindings/sound/fsl,easrc.yaml | 2 +- 9 files changed, 12 insertions(+), 12 deletions(-)
Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml +2 -2
@@ -71,8 +71,8 @@ examples: bus@1f059000 { compatible = "baikal,bt1-apb", "simple-bus"; - reg = <0 0x1f059000 0 0x1000>, - <0 0x1d000000 0 0x2040000>; + reg = <0x1f059000 0x1000>, + <0x1d000000 0x2040000>; reg-names = "ehb", "nodev"; #address-cells = <1>; #size-cells = <1>;
Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml +2 -2
@@ -85,8 +85,8 @@ examples: bus@1f05a000 { compatible = "baikal,bt1-axi", "simple-bus"; - reg = <0 0x1f05a000 0 0x1000>, - <0 0x1f04d110 0 0x8>; + reg = <0x1f05a000 0x1000>, + <0x1f04d110 0x8>; reg-names = "qos", "ehb"; #address-cells = <1>; #size-cells = <1>;
Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml +2 -2
@@ -106,8 +106,8 @@ examples: #include <dt-bindings/power/rk3288-power.h> vopb: vopb@ff930000 { compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff930000 0x0 0x19c>, - <0x0 0xff931000 0x0 0x1000>; + reg = <0xff930000 0x19c>, + <0xff931000 0x1000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>,
Documentation/devicetree/bindings/media/rockchip,vdec.yaml +1 -1
@@ -61,7 +61,7 @@ examples: vdec: video-codec@ff660000 { compatible = "rockchip,rk3399-vdec"; - reg = <0x0 0xff660000 0x0 0x400>; + reg = <0xff660000 0x400>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>, <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
Documentation/devicetree/bindings/media/rockchip-vpu.yaml +1 -1
@@ -66,7 +66,7 @@ examples: vpu: video-codec@ff9a0000 { compatible = "rockchip,rk3288-vpu"; - reg = <0x0 0xff9a0000 0x0 0x800>; + reg = <0xff9a0000 0x800>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vepu", "vdpu";
Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml +1 -1
@@ -53,7 +53,7 @@ examples: - | nfc: nand-controller@ff100000 { compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10"; - reg = <0x0 0xff100000 0x0 0x1000>; + reg = <0xff100000 0x1000>; clock-names = "controller", "bus"; clocks = <&clk200>, <&clk100>; interrupt-parent = <&gic>;
Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +1 -1
@@ -121,7 +121,7 @@ examples: cpts@310d0000 { compatible = "ti,am65-cpts"; - reg = <0x0 0x310d0000 0x0 0x400>; + reg = <0x310d0000 0x400>; reg-names = "cpts"; clocks = <&main_cpts_mux>; clock-names = "cpts";
Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +1 -1
@@ -65,7 +65,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sm8150.h> phy@88e2000 { compatible = "qcom,sm8150-usb-hs-phy"; - reg = <0 0x088e2000 0 0x400>; + reg = <0x088e2000 0x400>; #phy-cells = <0>; clocks = <&rpmhcc RPMH_CXO_CLK>;
Documentation/devicetree/bindings/sound/fsl,easrc.yaml +1 -1
@@ -80,7 +80,7 @@ examples: easrc: easrc@300c0000 { compatible = "fsl,imx8mn-easrc"; - reg = <0x0 0x300c0000 0x0 0x10000>; + reg = <0x300c0000 0x10000>; interrupts = <0x0 122 0x4>; clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; clock-names = "mem";
Signature · 1 line
2.25.1
Quoted 3 lines · Rob Herring
The examples template is a 'simple-bus' with a size of 1 cell for had between 2 and 4 cells which really only errors on I2C or SPI type devices with a single cell.
Acked-by Mark Brown <[email protected]>