Skip to contentSkip to conversation

Add coresight support for SM8150 and few changes to SC7180

PATCH In review Sai Prakash Ranjan 3 participants 15 messages Jun 9, 2020 – Jul 28, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover Add coresight support for SM8150 and few changes to SC7180

This series adds coresight support for SM8150 SoC and some coresight DT changes to SC7180 SoC.

Patch 1 depends on coresight etm driver change:
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=159e248e75b1b548276b6571d7740a35cab1f5be

Patch 3 depends on coresight replicator driver change:
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=1b6cddfb7ebb5ed293124698f147e914b15315a1

Patch 4 depends on following coresight driver changes and SMMU DT node for SM8150
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=159e248e75b1b548276b6571d7740a35cab1f5be
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=1b6cddfb7ebb5ed293124698f147e914b15315a1
- https://lore.kernel.org/lkml/[email protected]/

Tested this series on SM8150 and SC7180.

Sai Prakash Ranjan (4):
arm64: dts: qcom: sc7180: Add support to skip powering up of ETM
arm64: dts: qcom: sc7180: Add iommus property to ETR
arm64: dts: qcom: sc7180: Add support for context losing replicator
arm64: dts: qcom: sm8150: Add Coresight support

 arch/arm64/boot/dts/qcom/sc7180.dtsi |  10 +
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 591 +++++++++++++++++++++++++++
 2 files changed, 601 insertions(+)

base-commit: 98cfcf1a9c542d6bec7b29915d838caaf72da737

Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#1 lore raw

PATCH 1/4 arm64: dts: qcom: sc7180: Add support to skip powering up of ETM

Add "qcom,skip-power-up" property to skip powering up ETM on SC7180 SoC to workaround a hardware errata where CPU watchdog counter is stopped when ETM power up bit is set (i.e., when TRCPDCR.PU = 1).

---

Depends on ETM driver change here:
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=159e248e75b1b548276b6571d7740a35cab1f5be

---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +8 -0
index 7c2b79dda3d7..f684a0b87848 100644
@@ -1810,6 +1810,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1829,6 +1830,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1848,6 +1850,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1867,6 +1870,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1886,6 +1890,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1905,6 +1910,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1924,6 +1930,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1943,6 +1950,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
Reviewed-by on v1 1/4
#2 lore raw

Re: [PATCH 1/4] arm64: dts: qcom: sc7180: Add support to skip powering up of ETM

Quoted 76 lines · Sai Prakash Ranjan

Add "qcom,skip-power-up" property to skip powering up ETM on SC7180 SoC to workaround a hardware errata where CPU watchdog counter is stopped when ETM power up bit is set (i.e., when TRCPDCR.PU = 1).

---

Depends on ETM driver change here:
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=159e248e75b1b548276b6571d7740a35cab1f5be

---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +7 -0
index 7c2b79dda3d7..f684a0b87848 100644
@@ -1810,6 +1810,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1829,6 +1830,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1848,6 +1850,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1867,6 +1870,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1886,6 +1890,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1905,6 +1910,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1924,6 +1930,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {

arch/arm64/boot/dts/qcom/sc7180.dtsi line 1953

Quoted 4 lines
arch/arm64/boot/dts/qcom/sc7180.dtsi +1 -0
@@ -1943,6 +1950,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
Quoted 7 lines
arch/arm64/boot/dts/qcom/sc7180.dtsi +0 -1
 			out-ports {
 				port {
-- 

QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

#3 lore raw

PATCH 2/4 arm64: dts: qcom: sc7180: Add iommus property to ETR

In reply to Sai Prakash Ranjan

Define iommus property for Coresight ETR component in SC7180 SoC with the SID and mask to enable SMMU translation for this master.

---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +1 -0
index f684a0b87848..9b38867740ca 100644
@@ -1711,6 +1711,7 @@
 		etr@6048000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
 			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x04a0 0x20>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#4 lore raw

Re: [PATCH 2/4] arm64: dts: qcom: sc7180: Add iommus property to ETR

Quoted 4 lines · Sai Prakash Ranjan

Define iommus property for Coresight ETR component in SC7180 SoC with the SID and mask to enable SMMU translation for this master.

We don't have &apps_smmu in linux-next, as we've yet to figure out how to disable the boot splash or support the stream mapping handover.

So I'm not able to apply this.

Regards,
Bjorn

Quoted 21 lines
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +1 -0
index f684a0b87848..9b38867740ca 100644
@@ -1711,6 +1711,7 @@
 		etr@6048000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
 			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x04a0 0x20>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#5 lore raw

Re: [PATCH 2/4] arm64: dts: qcom: sc7180: Add iommus property to ETR

Hi Bjorn,

Quoted 7 lines · Bjorn Andersson
Quoted 4 lines · Sai Prakash Ranjan

Define iommus property for Coresight ETR component in SC7180 SoC with the SID and mask to enable SMMU translation for this master.

Quoted 5 lines

We don't have &apps_smmu in linux-next, as we've yet to figure out how to disable the boot splash or support the stream mapping handover.

So I'm not able to apply this.

This is for SC7180 which has apps_smmu not SM8150.

Thanks,
Sai

Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#6 lore raw

Re: [PATCH 2/4] arm64: dts: qcom: sc7180: Add iommus property to ETR

Hi Bjorn,

Quoted 10 lines · Sai Prakash Ranjan

Hi Bjorn,

Quoted 7 lines · Bjorn Andersson
Quoted 4 lines · Sai Prakash Ranjan

Define iommus property for Coresight ETR component in SC7180 SoC with the SID and mask to enable SMMU translation for this master.

Quoted 8 lines
Quoted 5 lines

We don't have &apps_smmu in linux-next, as we've yet to figure out how to disable the boot splash or support the stream mapping handover.

So I'm not able to apply this.

This is for SC7180 which has apps_smmu not SM8150.

Please let me know if this needs further explanation.

Thanks,
Sai

Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#7 lore raw

Re: [PATCH 2/4] arm64: dts: qcom: sc7180: Add iommus property to ETR

Quoted 16 lines · Sai Prakash Ranjan

Hi Bjorn,

Quoted 13 lines · Sai Prakash Ranjan

Hi Bjorn,

Quoted 10 lines · Bjorn Andersson
Quoted 4 lines · Sai Prakash Ranjan

Define iommus property for Coresight ETR component in SC7180 SoC with the SID and mask to enable SMMU translation for this master.

We don't have &apps_smmu in linux-next, as we've yet to figure out how to disable the boot splash or support the stream mapping handover.

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

So I'm not able to apply this.

This is for SC7180 which has apps_smmu not SM8150.

Please let me know if this needs further explanation.

I must have commented on the wrong patch, sorry about that. The SM8150 patch in this series does not compile due to the lack of &apps_smmu.

I've picked the other 3 patches.

Thanks,
Bjorn

#8 lore raw

Re: [PATCH 2/4] arm64: dts: qcom: sc7180: Add iommus property to ETR

Quoted 24 lines · Bjorn Andersson
Quoted 22 lines · Sai Prakash Ranjan

Hi Bjorn,

Quoted 18 lines · Sai Prakash Ranjan

Hi Bjorn,

Quoted 7 lines · Bjorn Andersson
Quoted 4 lines · Sai Prakash Ranjan

Define iommus property for Coresight ETR component in SC7180 SoC with the SID and mask to enable SMMU translation for this master.

Quoted 5 lines

We don't have &apps_smmu in linux-next, as we've yet to figure out how to disable the boot splash or support the stream mapping handover.

So I'm not able to apply this.

This is for SC7180 which has apps_smmu not SM8150.

Quoted 8 lines
Quoted 2 lines

Please let me know if this needs further explanation.

I must have commented on the wrong patch, sorry about that. The SM8150 patch in this series does not compile due to the lack of &apps_smmu.

I've picked the other 3 patches.

Thanks Bjorn, I can resend SM8150 coresight change when SMMU support lands for it since coresight ETR won't work without it on android bootloaders.

As for the other 3 patches, Patch 1 and Patch 2 will apply cleanly to the right coresight nodes but due to the missing unique context in Patch 3, it could be applied to some other node. We had to upload this change 3 times in chromium tree to get it applied to the right replicator node :) and this property in Patch 3 is important to fix a hard lockup. I'm not sure why this patch is missing the proper context :/

I couldn't find the changes yet in qcom/for-next or other branches to see if it is applied to right replicator node. In case you haven't applied it yet, Patch 3 change should be applied to "replicator@6b06000" node.

Thanks,
Sai

Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#9 lore raw

Re: [PATCH 2/4] arm64: dts: qcom: sc7180: Add iommus property to ETR

Quoted 48 lines · Sai Prakash Ranjan
Quoted 24 lines · Bjorn Andersson
Quoted 22 lines · Sai Prakash Ranjan

Hi Bjorn,

Quoted 18 lines · Sai Prakash Ranjan

Hi Bjorn,

Quoted 7 lines · Bjorn Andersson
Quoted 4 lines · Sai Prakash Ranjan

Define iommus property for Coresight ETR component in SC7180 SoC with the SID and mask to enable SMMU translation for this master.

Quoted 5 lines

We don't have &apps_smmu in linux-next, as we've yet to figure out how to disable the boot splash or support the stream mapping handover.

So I'm not able to apply this.

This is for SC7180 which has apps_smmu not SM8150.

Quoted 8 lines
Quoted 2 lines

Please let me know if this needs further explanation.

I must have commented on the wrong patch, sorry about that. The SM8150 patch in this series does not compile due to the lack of &apps_smmu.

I've picked the other 3 patches.

Thanks Bjorn, I can resend SM8150 coresight change when SMMU support lands for it
since coresight ETR won't work without it on android bootloaders.

As for the other 3 patches, Patch 1 and Patch 2 will apply cleanly to the right coresight
nodes but due to the missing unique context in Patch 3, it could be applied to some other node.
We had to upload this change 3 times in chromium tree to get it applied to the right replicator node :)
and this property in Patch 3 is important to fix a hard lockup. I'm not sure why this patch is missing
the proper context :/

Quoted 6 lines

I couldn't find the changes yet in qcom/for-next or other branches to see if it is
applied to right replicator node. In case you haven't applied it yet, Patch 3 change
should be applied to "replicator@6b06000" node.

Thanks for pointing that out, I've fixed up the incorrectly applied change. (Still not published the branch)

For the future I believe you can pass -U <n> to git format-patch to get <n> number of lines of context. Making that bigger than the default 3 should help for the coresight patches.

Thanks,
Bjorn

#10 lore raw

Re: [PATCH 2/4] arm64: dts: qcom: sc7180: Add iommus property to ETR

Quoted 57 lines · Bjorn Andersson
Quoted 48 lines · Sai Prakash Ranjan
Quoted 24 lines · Bjorn Andersson
Quoted 22 lines · Sai Prakash Ranjan

Hi Bjorn,

Quoted 18 lines · Sai Prakash Ranjan

Hi Bjorn,

Quoted 7 lines · Bjorn Andersson
Quoted 4 lines · Sai Prakash Ranjan

Define iommus property for Coresight ETR component in SC7180 SoC with the SID and mask to enable SMMU translation for this master.

Quoted 5 lines

We don't have &apps_smmu in linux-next, as we've yet to figure out how to disable the boot splash or support the stream mapping handover.

So I'm not able to apply this.

This is for SC7180 which has apps_smmu not SM8150.

Quoted 8 lines
Quoted 2 lines

Please let me know if this needs further explanation.

I must have commented on the wrong patch, sorry about that. The SM8150 patch in this series does not compile due to the lack of &apps_smmu.

I've picked the other 3 patches.

Thanks Bjorn, I can resend SM8150 coresight change when SMMU support lands for it
since coresight ETR won't work without it on android bootloaders.

As for the other 3 patches, Patch 1 and Patch 2 will apply cleanly to the right coresight
nodes but due to the missing unique context in Patch 3, it could be applied to some other node.
We had to upload this change 3 times in chromium tree to get it applied to the right replicator node :)
and this property in Patch 3 is important to fix a hard lockup. I'm not sure why this patch is missing
the proper context :/

Quoted 6 lines

I couldn't find the changes yet in qcom/for-next or other branches to see if it is
applied to right replicator node. In case you haven't applied it yet, Patch 3 change
should be applied to "replicator@6b06000" node.

Quoted 8 lines

Thanks for pointing that out, I've fixed up the incorrectly applied change. (Still not published the branch)

For the future I believe you can pass -U <n> to git format-patch to get <n> number of lines of context. Making that bigger than the default 3 should help for the coresight patches.

Thanks Bjorn, will use this option going forward.

Thanks,
Sai

Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#11 lore raw

PATCH 3/4 arm64: dts: qcom: sc7180: Add support for context losing replicator

In reply to Sai Prakash Ranjan

Add "qcom,replicator-loses-context" property to the replicator in Always-on domain in SC7180 SoC to enable coresight replicator driver to handle this variation of replicator designs.

---

Depends on coresight replicator change here:
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=1b6cddfb7ebb5ed293124698f147e914b15315a1

---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +1 -0
index 9b38867740ca..0cbe322a30c9 100644
@@ -1784,6 +1784,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
 
 			out-ports {
 				port {
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
Reviewed-by on v1 3/4
#12 lore raw

Re: [PATCH 3/4] arm64: dts: qcom: sc7180: Add support for context losing replicator

Quoted 19 lines · Sai Prakash Ranjan

Add "qcom,replicator-loses-context" property to the replicator in Always-on domain in SC7180 SoC to enable coresight replicator driver to handle this variation of replicator designs.

---

Depends on coresight replicator change here:
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=1b6cddfb7ebb5ed293124698f147e914b15315a1

---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/sc7180.dtsi +0 -0
index 9b38867740ca..0cbe322a30c9 100644

arch/arm64/boot/dts/qcom/sc7180.dtsi line 1787

Quoted 4 lines
arch/arm64/boot/dts/qcom/sc7180.dtsi +1 -0
@@ -1784,6 +1784,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
Quoted 7 lines
arch/arm64/boot/dts/qcom/sc7180.dtsi +0 -1
 			out-ports {
 				port {
-- 

QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

#13 lore raw

PATCH 4/4 arm64: dts: qcom: sm8150: Add Coresight support

In reply to Sai Prakash Ranjan

Add coresight components found on Qualcomm SM8150 SoC.

---

Depends on following coresight driver and SM8150 SMMU support:
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=159e248e75b1b548276b6571d7740a35cab1f5be
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=1b6cddfb7ebb5ed293124698f147e914b15315a1
- https://lore.kernel.org/lkml/[email protected]/

---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 591 +++++++++++++++++++++++++++
 1 file changed, 591 insertions(+)
arch/arm64/boot/dts/qcom/sm8150.dtsi +591 -0
index 141c21dfa68c..a2fc77211cc3 100644
@@ -538,6 +538,597 @@
 			};
 		};
 
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>,
+			      <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel1_in4: endpoint {
+						remote-endpoint = <&swao_replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6043000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06043000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel2_out: endpoint {
+						remote-endpoint = <&merge_funnel_in2>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					reg = <2>;
+					funnel2_in2: endpoint {
+						remote-endpoint = <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					merge_funnel_in2: endpoint {
+						remote-endpoint = <&funnel2_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&replicator1_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in0: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf@6047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06047000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x05e0 0x0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		replicator@604a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x0604a000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					replicator1_out: endpoint {
+						remote-endpoint = <&swao_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					replicator1_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel@6b08000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06b08000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_funnel_out: endpoint {
+						remote-endpoint = <&swao_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					swao_funnel_in: endpoint {
+						remote-endpoint = <&replicator1_out>;
+					};
+				};
+			};
+		};
+
+		etf@6b09000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b09000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_etf_out: endpoint {
+						remote-endpoint = <&swao_replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_etf_in: endpoint {
+						remote-endpoint = <&swao_funnel_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6b0a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b0a000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
+
+			out-ports {
+				port {
+					swao_replicator_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_replicator_in: endpoint {
+						remote-endpoint = <&swao_etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 { /* APSS Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint = <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint = <&funnel2_in2>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint = <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
 		tlmm: pinctrl@3100000 {
 			compatible = "qcom,sm8150-pinctrl";
 			reg = <0x0 0x03100000 0x0 0x300000>,
Signature · 8 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Reviewed-by on v1 4/4
#14 lore raw

Re: [PATCH 4/4] arm64: dts: qcom: sm8150: Add Coresight support

Quoted 5 lines · Sai Prakash Ranjan

Add coresight components found on Qualcomm SM8150 SoC.

---

Quoted 8 lines

Depends on following coresight driver and SM8150 SMMU support:
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=159e248e75b1b548276b6571d7740a35cab1f5be
- https://git.linaro.org/kernel/coresight.git/commit/?h=next-v5.8-rc1&id=1b6cddfb7ebb5ed293124698f147e914b15315a1
- https://lore.kernel.org/lkml/[email protected]/

---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 591 +++++++++++++++++++++++++++
 1 file changed, 591 insertions(+)
Quoted 612 lines
arch/arm64/boot/dts/qcom/sm8150.dtsi +591 -0
index 141c21dfa68c..a2fc77211cc3 100644
@@ -538,6 +538,597 @@
 			};
 		};
 
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>,
+			      <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel1_in4: endpoint {
+						remote-endpoint = <&swao_replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6043000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06043000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel2_out: endpoint {
+						remote-endpoint = <&merge_funnel_in2>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					reg = <2>;
+					funnel2_in2: endpoint {
+						remote-endpoint = <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					merge_funnel_in2: endpoint {
+						remote-endpoint = <&funnel2_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&replicator1_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in0: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf@6047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06047000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x05e0 0x0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		replicator@604a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x0604a000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					replicator1_out: endpoint {
+						remote-endpoint = <&swao_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					replicator1_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel@6b08000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06b08000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_funnel_out: endpoint {
+						remote-endpoint = <&swao_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					swao_funnel_in: endpoint {
+						remote-endpoint = <&replicator1_out>;
+					};
+				};
+			};
+		};
+
+		etf@6b09000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b09000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_etf_out: endpoint {
+						remote-endpoint = <&swao_replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_etf_in: endpoint {
+						remote-endpoint = <&swao_funnel_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6b0a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b0a000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
+
+			out-ports {
+				port {
+					swao_replicator_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_replicator_in: endpoint {
+						remote-endpoint = <&swao_etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 { /* APSS Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint = <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint = <&funnel2_in2>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint = <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
 		tlmm: pinctrl@3100000 {
 			compatible = "qcom,sm8150-pinctrl";
 			reg = <0x0 0x03100000 0x0 0x300000>,
Signature · 8 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel